Characterizing white LEDs for general illumination applications

Nadarajah Narendran; Nishantha Maliyagoda; Andrew Bierman; Richard M. Pysar; Martin Overington

doi:10.1117/12.382836

17 April 2000 Characterizing white LEDs for general illumination applications

Nadarajah Narendran, Nishantha Maliyagoda, Andrew Bierman, Richard M. Pysar, Martin Overington

Proceedings Volume 3938, Light-Emitting Diodes: Research, Manufacturing, and Applications IV; (2000) https://doi.org/10.1117/12.382836
Event: Symposium on Integrated Optoelectronics, 2000, San Jose, CA, United States

Abstract

During the past few years several manufacturers have introduced white Light Emitting Diodes (LEDs). At the present time these LEDs do not provide sufficient luminous flux for general lighting applications. Many manufacturers are studying the possibility of grouping several LEDs and overdriving them to produce more luminous flux. The impact of higher drive current on long-term performance of LEDs is not well known within the lighting community. Therefore, an experimental study was conducted to investigate the photometric characteristics of white LEDs as a function of time for different drive currents. The LEDs investigated in this study were the 5-millimeter type that uses GaN-based blue LEDs and Y₃Al₅O₁₂ (yttrium aluminum garnet) phosphors (YAG phosphors). These LEDs produced 65 percent more light output at 55 mA compared to the light output at 20 mA. Groups of ten LEDs were driven continuously at constant current 20, 30, 50, 70, 90, and 110 mA and their relative light output were monitored at regular intervals for over 4000 hours. The light output degradation rate increased with increasing drive currents. Typically, LED manufacturers do not recommend driving these LEDs above 20 mA. However, it was noticed that the light output of these LEDs degraded to 65% of its initial value around 4000 hours even for those LEDs driven at 20 mA, which is the manufacturer recommended value for drive current. Considering the amount of flux produced by these 5 mm type white LEDs and their light output degradation rate, they are not yet suitable for general lighting applications.

Citation Download Citation

Nadarajah Narendran, Nishantha Maliyagoda, Andrew Bierman, Richard M. Pysar, and Martin Overington "Characterizing white LEDs for general illumination applications", Proc. SPIE 3938, Light-Emitting Diodes: Research, Manufacturing, and Applications IV, (17 April 2000); https://doi.org/10.1117/12.382836

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available