Skip to main content

leBIBIQBPP: a set of databases and a webtool for automatic phylogenetic analysis of prokaryotic sequences

Abstract

Background

Estimating the phylogenetic position of bacterial and archaeal organisms by genetic sequence comparisons is considered as the gold-standard in taxonomy. This is also a way to identify the species of origin of the sequence. The quality of the reference database used in such analyses is crucial: the database must reflect the up-to-date bacterial nomenclature and accurately indicate the species of origin of its sequences.

Description

leBIBIQBPP is a web tool taking as input a series of nucleotide sequences belonging to one of a set of reference markers (e.g., SSU rRNA, rpoB, groEL2) and automatically retrieving closely related sequences, aligning them, and performing phylogenetic reconstruction using an approximate maximum likelihood approach. The system returns a set of quality parameters and, if possible, a suggested taxonomic assigment for the input sequences. The reference databases are extracted from GenBank and present four degrees of stringency, from the “superstringent” degree (one type strain per species) to the loosely parsed degree (“lax” database). A set of one hundred to more than a thousand sequences may be analyzed at a time. The speed of the process has been optimized through careful hardware selection and database design.

Conclusion

leBIBIQBPP is a powerful tool helping biologists to position bacterial or archaeal sequence commonly used markers in a phylogeny. It is a diagnostic tool for clinical, industrial and environmental microbiology laboratory, as well as an exploratory tool for more specialized laboratories. Its main advantages, relatively to comparable systems are: i) the use of a broad set of databases covering diverse markers with various degrees of stringency; ii) the use of an approximate Maximum Likelihood approach for phylogenetic reconstruction; iii) a speed compatible with on-line usage; and iv) providing fully documented results to help the user in decision making.

Background

In clinical microbiology laboratories, but also in environmental and industrial microbiology laboratories, microbial identification is done daily to identify pathogens, food-spoilage linked species, water borne bacteria, or environmental prokaryotes. Conventional phenotypic tests used for species differentiation are progressively replaced by MALDI-TOF identification, although this approach is not designed for universal use but optimized for clinical microbiology [1, 2]. Carl Woese’s seminal work [3] has introduced the 16S ribosomal RNA (SSU rRNA) as the foundation of the modern taxonomy and systematics of prokaryotes. Therefore microbial identification rapidly took into account this innovation [4]. Identification of Bacteria and Archaea by comparing their 16S DNA sequences (SSU rDNA) to those of well determined organisms is now of common use as a diagnostic tool for clinical, industrial and environmental microbiology laboratory, as well as an exploratory tool for more specialized laboratories [511]. This practice is de facto a gold standard that is used as a control when studying a new identification method [1217].

The 97 % pragmatic threshold of 16S sequence identity percentage defining the separation between bacterial species and/or genera [18, 19] is widely accepted as a determination criterion, but it was initially designed to define new species, not for strain identification. It is prone to variations due to the quality of the reference and of the unknown sequences [19], its length and the method used to compute percentages of identity [20, 21]. The practical use of this species definition was so important that the Clinical and Laboratory Standards Institute has set-up guidelines for the interpretation of 16S sequence identity percentages [22].

The bioinformatical identification process is basically a comparison of a nucleotide sequence to a database generally involving a BLAST search [20, 23] to find the most similar sequences, and returns pairwise alignments and their statistical analysis. BLAST E-value, estimate the level of similarity between sequence pairs but not their evolutionary relatedness [24, 25]. As the first BLAST hit is often not the nearest phylogenetic neighbor [26], this may lead to erroneous species assignment [27]. To overcome this problem, the RDP (Ribosomal Database Project) uses a naive Bayesian rRNA classifier and returns the most probable genus given an input rRNA sequence [21]. For a more accurate identification, it uses a sequence match method that finds sequences most similar to a query sequence using a word matching strategy that does not require prior alignment [28]. This approach seems more accurate than BLAST to find evolutionarily closely related sequences.

Taking results of taxonomic identification from molecular sequence data without perspective may be misleading [29], especially if the identification procedure is based on raw BLAST identity ratios computed from partial sequence alignments [20, 25, 26, 30]. As for other organisms, the delineation of prokaryotic species is phylogenetically-based [31, 32]. A consequence of the fact that “species is the only taxonomic unit that can be defined in phylogenetic terms” [18] is that “additional strains could be affiliated to the species on the basis of partial sequences or a complete gene sequence of one gene of the gene set” [31]. Phylogeny is used to confirm the 97 % similarity rule of thumb, to correct it in the case of very closely related species, or to resolve marginal situations [27]. Phylogeny is also of a great help for taxonomic identification with non SSU rDNA genes [3338], even if no similarity thresholds were set for those markers. This use of phylogeny was stimulated by the possibility to search for similar sequences and to easily compute a phylogenetic tree using either pairwise [39] or multiple sequence alignments. For that purpose, it is possible to use on-line tools [20, 28, 4042], locally installed user-friendly programs [43, 44] or more specialized programs like ARB [45]. Note that a commercial solution including the construction of a phylogenetic tree is also available [46, 47].

Applications of taxonomic identification tools are diverse, and their number of citations betrays their every-day use in microbiology laboratories. SSU rDNA is of very common use to identify non-cultivated prokaryotes from various sources and has been validated for environmental or clinical specimens [6, 8, 4852]. LSU rDNA (or 23S) is less frequently used, mainly because of amplification difficulties and of the resulting lack of reference sequences in the databases [53, 54]. Ribosomal DNA is not the only target gene used for identification purposes, and a wide variety of housekeeping genes have been explored for bacterial identification [55]. The lack of general primers and universal database limits the use of such markers to a genus or a group of species, with the exception of rpoB [56]. The use of Multi-Locus Sequence Analysis (MLSA) is promoted to get a more precise identification [5759] but is not practical in diagnostic (clinical, industrial or environmental) laboratory conditions [6063]. The time and cost for a complete genome sequencing and the lack of available general databases limit the use of complete genome based MLSA even if bioinformatics tools are now available [64, 65].

Improvement of the efficiency of systems for the identification of prokaryotic organisms requires attention to the quality of the sequences in the reference database, the exact labelling of their species of origin, and a rigorous use of the bacterial nomenclature [20, 41, 42]. More than ten years ago, we developed BIBI, a BioInformatics Bacterial Identification tool [42]. This tool combines a BLAST search with the alignment of resulting similar sequences, and proposes an identification of the species of origin of the input sequence through phylogenetic reconstruction. The reference databases used by BIBI contain tags for sequences of Type strains, and this improves the accuracy of sequence identification by this system. An SSU-rDNA database as well as a database of various housekeeping gene sequences were developed and used by BIBI’s identification pipeline. Since its introduction, the system has evolved to a more sophisticated version called leBIBI, and it has become widely used for identification of Bacteria and Archaea, with about 150,000 identifications annually. The website is also mentioned as the source of bacterial identification in more than 100 articles dealing with the identification of newly described or rarely encountered pathogens in humans [6669], animals [7075], or environmental microbiology [76, 77]. It has also been analyzed in reviews of the sequence based identification approach [5, 55, 7882]. The main difference between BIBI and other alignment-based sequence identification tools is the fact that it promotes a phylogenetic approach. It gives hints for a correct interpretation of its results, and points-out conflicting factors to the microbiologist. The user can thus take a reasoned decision on his/her own. Although BIBI is an assistance to identification and not an automated identification system, it has been compared with other systems that claim to identify down to the species level [83].

Because the workflow for database construction, the program pipelines and the post-treatment scripts used by BIBI were extensively changed since the publication of the original paper, we present here a completely new version of this webware called leBIBIQBPP. It is an automated system to produce the phylogenetic analysis of the most closely related sequences in the reference database around a query sequence, using a approximate Maximum Likelihood (ML) approach. It delivers also useful quantitative information to deduce the phylogenetic position of the query sequence in a reference phylogeny.

Construction and contents

Several databases devoted to various markers are integrated in leBIBIQBPP. The largest one is for SSU rDNA. Others are smaller databases of general interest (rpoB) and databases that are relevant for a restricted spectrum of bacteria or for niche applications (e.g., sodA, groEL2). Note that other databases devoted to specific applications or research projects are also available upon request.

Databases typology

The SSU rDNA databases have five “flavors”. (i) The “lax” database contains all bacterial and archaeal SSU rDNA sequences of GenBank except those for which no taxonomical information more specific than Bacteria or Archaea is reported. It is very comprehensive but contains a large amount of not fully identified sequences. The coverage of genovars is maximum in the “lax” database. (ii) The “stringent” database contains sequences that are identified at the species level with a valid name according to the bacterial nomenclature. It also contains sequences of type strains of newly described bacteria or archaea, an indication that their names are under consideration for eventual validation. These two databases contain a lot of identical sequences and are rather frequently affected by erroneous species identifications. (iii) The “TS-stringent” database contains only sequences of type strains (TS), so that newly described or non validly published species may be missing. This database is less susceptible to be contaminated by erroneous species identifications. (iv) The “superstringent” database is a subset of the previous one where only one or a very small number of sequences is retained for each species. The sequences are those labelled in the List of Prokaryotic names with Standing in Nomenclature (LPSN) as reference sequence for a given species. Identification errors are almost absent there, but newly described species or non validly published species are mostly absent. (v) Lastly, the “genus-level” database is a subset of the “superstringent” database containing only one sequence for each genus: the sequence of the TS of the genus type-species.

As of december 2014, the five databases contain respectively 1,309,339, 234,263, 21,451, 11,289 and 2291 SSU rRNA sequences.

Construction of the “lax” database

The GenBank database structured under the ACNUC format [84] is the source of the sequences and their annotations. The sequence and annotations of each gene of interest are extracted in a GenBank format flat file using the RAA_Query communication protocol [85]. For each nucleotide sequence longer than 300 bp, the name of the species and other information about the nature of the strain, like the NCBI TaxId, the strain collection Id or the taxonomic rank are extracted from flat files.

Next, a script extracts relevant information concerning the nomenclature compliance and the TS status of each sequence. Species names are checked against the DSMZ (http://www.dsmz.de) and LPSN databases [86] (http://www.bacterio.net) devoted to prokaryotic nomenclature. In some cases, the TaxId allows to correct species names. If a name is validly published, the strain is marked as nomenclature compliant (tag v for valid). In the opposite case, the name is marked as not compliant to nomenclature (tag ?). A list of GenBank Ids that have an erroneous species name has been constructed by hand since 2007 and extended when the evidence of error is reported. GenBank Ids of each sequence are compared to this list, and the occurrence of the erroneous species assignment is flagged (tag X). Tags corresponding to the Nomenclature information for a given sequence are therefore [v/?/X].

The TS status of each sequence is deduced by comparison of the collection Id of the corresponding strain to a database constructed by using the current DSMZ “Prokaryotic Nomenclature up-to-date” Excel file, the LPSN website and a home-made list locally maintained since 2004. The TS status of the strain may be expressed by a T following the strain Id (for example CIP8828T). If this tag is found, and if the name is grammatically correct (two words, the first being capitalized, or four words, one being “subsp.”) the sequence is considered to be that of a TS. In some cases the T flag is used without a grammatically correct name; this may be the preliminary indication of a new species, the sequence is therefore tagged t to prevent any loss of information. At the end of this process, a list of missing TS is built (type strains present in the above-mentioned TS database but not found at this point), and the StrainInfo database is used to manually correct the sequence TS status. A sequence strain quoted as “reference sequence” in LPSN is tagged TT. Other sequences are tagged N. The tags corresponding to the TS information are therefore [TT/T/t/N]. A Fasta-formatted sequence file is then produced using a descriptor constructed according to this grammar:>Genus_species[_subsp_subspecies] [v/?/X] [TT/T/t/N] GenBankId=NCBI taxonomic levels

Other database flavors are constructed extracting corresponding sequences from the “lax” database by searching for regular expressions with the Unix command grep. For instance, the motif TT is used to collect sequences of the “superstringent” database. For each database, a BLAST database is then constructed. Databases for the other markers, for which only three flavors (“lax”, “stringent”, “TS-stringent”) are considered, are constructed by the same procedure. Table 1 presents the databases flavors and specifications.

Table 1 List of the genes included in leBIBIQBPP

Quality control of reference databases

The quality control of the SSU rDNA database is done by a script that searches missing TSs by comparing the DSMZ list of species and the TSs of the database. This is both a proof of the correct extraction of all genera, and an indicator of the exhaustivity of the database. As TSs of non-cultivated species are not defined, one sequence for each medically important, non-cultivated species is manually introduced. The increase of the number of sequences for each prokaryotic phylum between two extractions is also checked, as well as the global increase of all TS sequences. Because the other databases are not exhaustive in term of taxonomic coverage, we only check for them the global increase of the number of sequences between two extractions and the global increase of TS sequences.

System use

A query sequence, or a set of query sequences, is submitted to the server. The user first selects the relevant database for input sequences. Only two parameters are under user control: the number of closely related sequences to be included in the tree; the alignment mode (speed or accuracy).

Tree building

The first step towards the construction of a phylogenetic tree including the query sequence consists in a BLAST search [23]. BLASTN is run with the query against the selected database with an expectation value set to E≤0.1 and without filtering for low-complexity regions. The requested number of sequences with the highest similarity scores is extracted. This is not done if the number of BLAST hits is <10 because it is the sign that something went wrong.

Selected sequences are multiply aligned by MAFFT [87]. Then, the BMGE program [88] with its default parameters is used to trim sequences in the multiple sequence alignment in order to select blocks of sites that are optimally suited for phylogenetic inference.

FastTree [89] is then used to reconstruct the tree by approximate maximum likelihood. The General Time Reversible (GTR) model is used for phylogenetic reconstruction [90] with the Gamma correction for across sites evolutionary rate variation. FastTree also uses the SH (Shimodaira-Hasegawa) test [91] to quickly estimate the reliability of each split in the tree rooted at the middle of the largest tip-to-tip distance.

Tree visualization

A Scalable Vector Graphic (SVG) version of the tree is computed by SeaView [44] and is modified by a set of Python scripts to decorate sequence labels (species name and GenBank IDs) with hypertext links to LPSN, a local copy of GenBank, and StrainInfo. The positions in the tree of the three best BLAST hits are shown by colored dots. LeBIBIQBPP also outputs another tree where the species name part of sequence labels is replaced by taxonomic information as follows: the full taxonomic classification string of each sequence (with all taxon levels from Bacteria or Archaea to family, genus and species) is computed, the part of these strings that is shared by all sequences of the tree is removed, and what remains is used to build sequence labels. Application of the “branch width as support” option of SeaView allows to graphically display branch support through branch widths: widest branches correspond to SH≥0.95, while thin ones correspond to SH≤0.80. A version of the tree with numerical support values is also available.

Tree analysis

The sequence with the smallest patristic distance (that is the sum of the length of the branches connecting two leaves) from the query sequence is displayed. A query sequence at small topological distance of database sequences suggests a high evolutionary relatedness between them. This distance allows to define the proximal cluster, that is, all sequences at a topological distance of two nodes or less from the query.

If the distance between the query sequence and the closest species is under the 75 % percentile of the distribution of intra-species distances, leBIBIQBPP outputs a message stating that the query sequence putatively belongs to this species. Next, if the same distance is under the 75 % percentile of the distribution of genus inter-species distances, the message reports the putative belonging of the query sequence to the genus of the closest species. This information depends of course of which reference database is used as wrongly assigned sequences may destroy its accuracy.

A warning message is issued when the closest sequence in terms of patristic distance does not belong to the proximal cluster. The system also issues a message when the closest sequence is not among the five best BLAST hits to point out the relatively frequent cases where the best BLAST hit does not match the evolutionary closest neighbor. Also, the taxonomic diversity within the tree is estimated by collating genera of the tree leaves. If they are all identical, a warning is returned indicating that no outgroup is available. In such case, it is advisable to repeat the analysis after having increased the number of BLAST hits retained for tree building.

Quality control of taxonomic assignments

We have tested leBIBIQBPP by using some sets of sequences deposited in NCBI PopSets (http://0-www-ncbi-nlm-nih-gov.brum.beds.ac.uk/popset/). A PopSet is “a set of DNA sequences that have been collected to analyse the evolutionary relatedness of a population. The population could originate from different members of the same species, or from organisms from different species”. Twenty-two PopSets have been used (the sequences are available from the website). We have also used a set of sequences from our laboratory that are available on the leBIBIQBPP website. For each sequence, we have verified that the relevance of the selection by BLAST, of the most closely related sequences and that the phylogenetic reconstruction was of good quality.

The possible recruitment of sequences that are not closely phylogenetically linked to the query is one of the identified weakness of the BLAST approach [26]. The result of this kind of event is the corruption of the phylogeny by an outlier sequence. The outlier usually appears at the end of a long branch, and, additionally, the long-branch attraction effect may attract unrelated sequences and complexify the interpretation. The tree using taxonomic ranks as sequence labels has been specifically developed to identify such BLAST recruitment errors. When the taxonomic rank of the corrupting sequence does not correspond at all to surrounding ones, a “reverse QBPP” (see infra) can be performed to clarify this undesirable situation.

Utility and discussion

The use of leBIBIQBPP is straightforward because it only requires to paste a sequence (or a set of sequences) in a webpage. It is also possible to use a test sequence, randomly chosen in a predefined set, for demonstration purposes or to verify if the system is operational.

Data analysis

LeBIBIQBPP results appear in a page containing a summary of all computations. All files that were used or generated by leBIBIQBPP are also accessible.

Report

The report (Fig. 1) summarizes the analysis and gives information relevant for the interpretation of the phylogeny and the taxonomic assignment of the query sequence. A summary of the database used is given along with statements about the consequences of the database stringency on the obtained phylogeny.

Fig. 1
figure 1

LeBIBIQBPP report summarizes the analysis and gives additional informations that may be useful to interprete the phylogenetic tree

The nucleotide composition of the query sequence is given. If it contains any undetermined bases, their amount is an indicator of the quality of the sequencing process. Too many undetermined bases have a negative impact on the quality of the phylogeny and this leads to a warning message. The length of the matching section of the first BLAST hit is expected to be close to the length of the query (≥95 %). Even if this does not impair phylogenetic reconstruction, it may indicate a global or local low quality of the query sequence. This indication may point out, for those that continue to use the 97 % identity rule to identify bacterial or archaeal 16S sequences, that this rule is not without shortcomings.

Phylogenetic reconstruction by leBIBIQBPP can be expected to be reliable when the output tree contains sequence clusters from various species and genera around the query sequence. Ideally, an outgroup belonging to another, closely related, genus is required to interpretate the phylogeny. Such an outgroup genus is however not absolutely needed if the genus under consideration contains multiple and phylogenetically distant species.

The goal of the identification of the proximal cluster is to indicate if the query is inside, or close, to a taxonomically homogeneous cluster. Patristic distances between different sequences belonging to the same species or genus help determining whether the query sequence belongs to a given taxon. The closest TS to the query sequence is also shown, as well as its presence in the closest cluster, this to potentially link the query sequence to an existing classification. Even if this is somewhat an approximation, a strain is not expected to be phylogenetically far from the strains of the same species in term of patristic distance; the same is expected for a species within the genus. Therefore, the position of the query sequence in the distribution of intra-species and intra-genus patristic distances is given. The 75 % percentile of these distributions was chosen because of the possible presence of outliers, essentially ill-identified sequences.

The warning that may be output by the comparison between the proximal cluster and the closest sequence indicates a possible phylogenetic reconstruction problem and a careful reading of the tree, taking care of SH support values, may be useful.

Phylogenetic trees and alignment

The phylogenetic tree is labelled with sequence names that reflect the compliance of species names with nomenclature and whether they originate from type strains. The expression of the SH support level through branch width enables a direct interpretation of branch robustness. A similar tree with SH support as numerical values is also accessible.

The “Taxo-Tree” has been designed to rapidly identify whether outliers have been erroneously recruited by BLAST, but it may be also useful in the case where nomenclature does not rigorously follow phylogeny, pointing out incoherences.

The sequence alignment is provided as a SVG file to enable a survey of alignment quality.

Mitigation of BLAST-induced unexpected phylogenetic tree

The BLAST algorithm searches a database for similar sequences, not for the phylogenetically closest ones. Consequently, a very loosely related sequence gets sometimes recruited. This kind of outlier sequences may lead to difficulties in tree interpretation and is frequently characterized by the apparition of a long branch. A “reverse QBPP” procedure may identify the problem: submitting the outlier sequence, easily accessed through the tree hypertext links, to leBIBIQBPP will lead to a completely different set of selected species and tree.

Usability

Strategy of exploration and databases

The leBIBIQBPP databases and web tools are designed to quickly reconstruct a phylogeny with a SSU rDNA (16S) or a housekeeping protein gene sequence. It also provides elements to help the biologist to interpret the tree and especially to place the query sequence within a known taxonomy rank. As underlined in the databases section above, several different databases are available and QBPP gives a more informative answer if an adapted querying strategy is followed.

The optimal strategy is a trade-off between the advantages of a large number of recruited sequences (it increases the likelihood of having recruited all closely related sequences, and the quality of the coverage of diversity and of the phylogeny), processing speed, and ease in interpretation. The best protocol is to begin with a rather stringent database to maximize phylogenetic and taxonomic diversity. Retaining at least 50 sequences around the query reduces the risk of not recruiting phylogenetically closest strains because they are far in the BLAST hit list. If a broad variety of taxa is obtained (i.e., with external groups, especially genera), it is possible to reduce the number of extracted sequences for better readability, but the user will have to verify that there is no change in the closest clusters. On the contrary, if the tree does not contain enough species diversity, it is necessary to increase the number of extracted sequences or to try a more stringent database. It is always very important to test the “lax” database because some sequences of important uncultured species are present in this collection only.

The “lax” SSU rRNA database is the broadest, so its processing is the slowest. This database contains a lot of sequences that are approximately or wrongly identified or of poor quality and short (albeit >300 bp in length). It should be used to build a phylogeny of the query sequence versus any prokaryote (cultivated, environmental), but often the taxonomy will be difficult to interpret. It is exhaustive, but the phylogenetic signal may be blurred by a swarm of approximately identified sequences, of low quality and possibly redundant. The “lax” SSU rRNA database is therefore essentially exploratory, more suited for research than for routine analyses.

The “stringent” SSU rRNA database is the best when it comes to the quality of the phylogenetic reconstruction because it contains less sequences and has globally better characterized items. It contains sequences of strains that are validly denominated and represent all the biological diversity of species (besides another diversity created by errors in naming or publishing of sequences). Some strains belonging to a species whose members can be phylogenetically very distant (such lack of homogeneity is mostly due to lack of strains or taxonomical studies) cannot be processed without using this “stringent” database. On the contrary it may be impossible to use it in the case of species that are highly represented in GenBank because the phylogeny cannot be computed due to a large number of nearly identical sequences. In such a case the tree is saturated by one species (or genetic variant) and cannot be interpreted. This database is also the only one allowing to compute the distribution of the distances between sequences within one species because it contains often more than one sequence for a given species. Unfortunately it also contains incorrectly identified sequences, introducing uncertainty or errors in the interpretation of the phylogeny.

The “TS-stringent” database (only available for SSU rDNA sequences) is less contaminated by erroneous species names and generally the identification of the sequences is of high quality. This is obtained by a decrease of the variety (mostly one strain per species, the TS being present) that may lead to poor phylogenetic reconstructions in the case of high genomic variations among the species and a TS that is not representative of this diversity. The technical uncertainties in sequencing or possible contaminations or tube-switching explains the observed incoherences of the position of multiple sequences of the same type strain in the phylogenies. Unknown species are also more difficult to position among the already validated species clusters. Uncultured species are mostly missing as their TS are not defined.

The “superstringent” database (also only available for SSU rDNA sequences) is the smallest and fastest to run. The sequences are selected to be representative of a given species and are of high quality. Neither the diversity within a species, nor technically induced biodiversity is represented. As in the similar BLAST database entitled “rRNA typestrains/prokaryotic 16S ribosomal RNA” developed at the NCBI, uncultivated prokaryotes are not present because of the absence of TSs for these species. This is a database giving accurate phylogenies but that may be sometimes incorrect or not representative of the biological reality. The uncultured species are missing as in the “TS-stringent” database.

The “genus-level” database (also only available for SSU rDNA sequences) is the oddest of all. Its sequences are selected to represent all recognized genera. This is mostly useful to build very large phylogenies around a well identified query. Interpretation of the resulting tree may be difficult without studies with less stringent databases.

Comparison with other functionally close solutions

LeBIBIQBPP is somewhat similar to other webtools combining the selection of sequences similar to the query (by BLAST or other approaches), and a pipeline that performs multiple alignment, and finally computes a phylogeny. The closest equivalent is the NCBI BLASTN using the “16S ribosomal RNA sequence (Bacteria and Archaea)” database. This database is similar to our “superstringent” database and it is possible to compute a phylogenetic tree using a distance matrix built with BLAST pairwise alignments and either the Fast Minimum Evolution [92] or Neighbor Joining (NJ) [93] algorithms. The alignment between the query sequence and sequences issued from the BLAST search is not a multiple alignment and may only partially cover the query sequence. This is not a true phylogenetic reconstruction unlike done by leBIBIQBPP where a global alignment is computed and the tree is built with the ML approach which outperforms distance methods. The same research on the NCBI site may use the whole GenBank database with the option of suppressing “environmental samples”. This database is then close to our “lax” database but this does not repair the absence of true phylogenetic reconstruction, and in many situations the tree is overcrowded by very similar sequences.

The RDP web site also offers the possibility to load a query sequence, find the closest neighbours in terms of 7-mer sharing percentage (by using Sequence Match) and to build a phylogenetic tree (via Tree Builder). The databases provided by this service are known to be of high quality and it is possible to restrict it to cultured bacteria, uncultured or both as well as to TSs, non TSs or both. These selections thus correspond to our “lax” (selection of cultured and non-cultured) or “superstringent” (selection of type-strain sequences only) databases and to other, intermediate choices. The maximum number of matches is limited to 20, but it is possible to select more closest taxa by another procedure (Hierarchy Browser or Sequence Match), and to proceed to their phylogenetic analysis. Alignment is done by the fast, rRNA secondary-structure aware Infernal aligner [94], and the phylogeny is obtained by distance methods such as NJ or Weighbor [95] with bootstrap support computation. At most 50 sequences can be put in the tree. A good knowledge of bacterial taxonomy is required to select the more phylogenetically related neighbours and to select a pertinent outgroup if wanted. Apart from these requirements, the phylogeny obtained is subject to the intrinsic limitations of distance reconstruction methods. This website requires numerous selection and data transfer steps that are not needed in leBIBIQBPP The selection of the recruited sequences that will be used for alignment and phylogeny is not needed in leBIBIQBPP, where this is done by choosing the reference database and the number of retained matching sequences.

The last similar tool is provided by the Phylogeny.fr web site [96]. This system allows to perform a BLASTN search and then to compute a phylogeny on a set of homologous sequences. The first main difference with leBIBIQBPP is the fact that the submission of several sequences is not possible. Also, the database choice is limited to GenBank. Consequently, ill-identified sequences and large numbers of nearly identical sequences are often recruited in the resulting phylogenetic trees. In its simplest protocol, this web tool performs multiple sequence alignment computation by Muscle, alignment trimming by GBlocks, phylogenetic reconstruction by PhyML and tree rendering with TreeDyn [97]. Many options allow to customize this process. The main differences between the service provided by Phylogeny.fr and the present tool is that leBIBIQBPP performs all its analyses in one step from the user’s viewpoint, and that its databases are optimized for microbial phylogeny.

Case Studies

A short SSU rDNA gene fragment of an unknown bacterium was recently sequenced, and studied in our laboratory. Using the “stringent” database with 50 recruited sequences led to an unexpected phylogenetic tree with multiple warnings (Additional file 1). The interpretation was that the tree was unbalanced due to a large number of Mycobacterium tuberculosis sequences. M. lepromatosis was the closest species in terms of patristic and node distances. As this species has not been validly published yet (this is denoted by the t after the name), the “superstringent” database could not be used. The chosen solution was to increase the number of recruited sequences to 100. The resulting phylogenetic tree was considerably improved (Additional file 2), especially through the recruitment of an outgroup sequence. The M. leprae cluster is phylogenetically positioned close to M. lepromatosis and M. haemophilum, as expected. The query sequence is that of a new species of Mycobacterium [98]. This was confirmed by analysis of the rpoB sequence obtained from the same bacterial extract and the rpoB “stringent” database (Additional file 3).

A set of 44 partial SSU rDNA sequences (1200–1450 bp) have been obtained from bacteria cultivated from filtrated ion-exchanged tap water. The 44 sequences have been processed batch-wise by leBIBIQBPP with the “TS-stringent” database as reference in a five-minute run (Additional file 4). In most cases, the closest sequence to the query belongs to its proximal cluster. Therefore, the taxonomic assignment of 41 strains was highly reliable according to the criteria presented above. In three cases, the query was not clearly inside or close to a cluster. These three sequences require further expertise as they may belong to new taxonomic entities, species or genera.

Conclusion

LeBIBIQBPP is a unique tool helping biologists to build phylogenies involving prokaryotic species, in order to achieve the taxonomic assignment of sequences of interest. It is unique in the sense that it provides nomenclature-driven specialized databases, as well as a set of efficient programs allowing to reconstruct robust phylogenies, without sacrificing the speed required for an on-line service. First, leBIBIQBPP is different due to the use of a broad range of databases devoted to prokaryotes, and the careful selection of relevant sequences. Also, the emphasis on annotation quality for prokaryotic taxonomy cannot be found elsewhere. Second, multiple alignment trimming, as well as the use of an ML approach improve the quality of reconstructed trees. It could be argued that there are programs that perform better than FastTree for reconstructing phylogenies, but this comes with an important price in terms of processing speed. Lastly, a very important point is the fact that leBIBIQBPP does not impose an automated, fixed taxonomic assignment, but rather a panel of possible choices, open to interpretation.

Availability and requirements

The databases and identification tools can be accessed at http://umr5558-bibiserv.univ-lyon1.fr/lebibi/lebibi.cgi and any recent web browser can be used.

References

  1. Lipkin WI. Microbe hunting. Microbiol Mol Biol Rev. 2010; 74(3):363–377.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  2. Mellmann A, Müthing J. MALDI-TOF mass spectrometry-based microbial identification In: Tang YW, Stratton CW, editors. Advanced Techniques in Diagnostic Microbiology. New York: Springer: 2013. p. 187–207.

    Google Scholar 

  3. Woese CR, Kandler O, Wheelis ML. Towards a natural system of organisms: Proposal for the domains Archaea, Bacteria, and Eucarya. Proc Natl Acad Sci USA. 1990; 87(12):4576–4579.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  4. Weisburg WG, Barns SM, Pelletier DA, Lane DJ. 16S ribosomal DNA amplification for phylogenetic study. J Bacteriol. 1991; 173(2):697–703.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  5. Clarridge III JE. Impact of 16S rRNA gene sequence analysis for identification of bacteria on clinical microbiology and infectious diseases. Clin Microbiol Rev. 2004; 17(4):840–862.

    Article  CAS  Google Scholar 

  6. Jenkins C, Ling CL, Ciesielczuk HL, Lockwood J, Hopkins S, McHugh TD, et al. Detection and identification of bacteria in clinical samples by 16S rRNA gene sequencing: Comparison of two different approaches in clinical practice. J Med Microbiol. 2012; 61(Pt 4):483–488.

    Article  CAS  PubMed  Google Scholar 

  7. Pereira F, Carneiro J, Amorim A. Identification of species with DNA-based technology: Current progress and challenges. Recent Pat DNA Gene Seq. 2008; 2(3):187–199.

    Article  CAS  PubMed  Google Scholar 

  8. Drancourt M, Bollet C, Carlioz A, Martelin R, Gayral JP, Raoult D. 16S ribosomal DNA sequence analysis of a large collection of environmental and clinical unidentifiable bacterial isolates. J. Clin. Microbiol. 2000; 38(10):3623–3630.

    CAS  PubMed  PubMed Central  Google Scholar 

  9. Cheng C, Sun J, Zheng F, Wu K, Rui Y. Molecular identification of clinical “difficult-to-identify" microbes from sequencing 16S ribosomal DNA and internal transcribed spacer 2. Ann Clin Microbiol Antimicrob. 2014; 13(1):1.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  10. Chen L, Cai Y, Zhou G, Shi X, Su J, Chen G, et al. Rapid Sanger sequencing of the 16S rRNA gene for identification of some common pathogens. PLoS ONE. 2014; 9(2):88886.

    Article  CAS  Google Scholar 

  11. Mignard S, Flandrois JP. 16S rRNA sequencing in routine bacterial identification: A 30-month experiment. J Microbiol Methods. 2006; 67(3):574–581.

    Article  CAS  PubMed  Google Scholar 

  12. Werno AM, Christner M, Anderson TP, Murdoch DR. Differentiation of Streptococcus pneumoniae from nonpneumococcal streptococci of the Streptococcus mitis group by matrix-assisted laser desorption ionization-time of flight mass spectrometry. J Clin Microbiol. 2012; 50(9):2863–2867.

    Article  PubMed  PubMed Central  Google Scholar 

  13. Farfour E, Leto J, Barritault M, Barberis C, Meyer J, Dauphin B, et al. Evaluation of the Andromas matrix-assisted laser desorption ionization-time of flight mass spectrometry system for identification of aerobically growing Gram-positive bacilli. J Clin Microbiol. 2012; 50(8):2702–2707.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  14. Richter SS, Sercia L, Branda JA, Burnham CAD, Bythrow M, Ferraro MJ, et al. Identification of Enterobacteriaceae by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using the VITEK MS system. Eur J Clin Microbiol Infect Dis. 2013; 32(12):1571–1578.

    Article  CAS  PubMed  Google Scholar 

  15. Sendid B, Ducoroy P, François N, Lucchi G, Spinali S, Vagner O, et al. Evaluation of MALDI-TOF mass spectrometry for the identification of medically-important yeasts in the clinical laboratories of Dijon and Lille hospitals. Med Mycol. 2012; 51:25–32.

    Article  CAS  PubMed  Google Scholar 

  16. Buchan BW, Riebe KM, Timke M, Kostrzewa M, Ledeboer NA. Comparison of MALDI-TOF MS with HPLC and nucleic acid sequencing for the identification of Mycobacterium species in cultures using solid medium and broth. Am J Clin Pathol. 2014; 141(1):25–34.

    Article  CAS  PubMed  Google Scholar 

  17. Lee MJ, Jang SJ, Li XM, Park G, Kook JK, Kim MJ, et al. Comparison of rpoB gene sequencing, 16S rRNA gene sequencing, gyrB multiplex PCR, and the VITEK2 system for identification of Acinetobacter clinical isolates. Diagn Microbiol Infect Dis. 2014; 78(1):29–34.

    Article  CAS  PubMed  Google Scholar 

  18. Stackebrandt E, Goebel BM. Taxonomic note: A place for DNA-DNA reassociation and 16S rRNA sequence analysis in the present species definition in bacteriology. Int J Syst Bacteriol. 1994; 44(4):846–849.

    Article  CAS  Google Scholar 

  19. Stackebrandt E, Ebers J. Taxonomic parameters revisited: Tarnished gold standards. Microbiol Today. 2006; 33:152–155.

    Google Scholar 

  20. Chun J, Lee JH, Jung Y, Kim M, Kim S, Kim BK, et al. EzTaxon: A web-based tool for the identification of prokaryotes based on 16S ribosomal RNA gene sequences. Int J Syst Evol Microbiol. 2007; 57(10):2259–2261.

    Article  CAS  PubMed  Google Scholar 

  21. Wang Q, Garrity GM, Tiedje JM, Cole JR. Naive Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Appl Environ Microbiol. 2007; 73(16):5261–5267.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  22. Petti CA, Bosshard PP, Brandt ME, Clarridge III JE, Feldblyum TV, Foxall P, et al. Interpretive Criteria for Identification of Bacteria and Fungi by DNA Target Sequencing; Approved Guideline. Wayne, Pennsylvania: Clinical and Laboratory Standards Institute; 2008.

    Google Scholar 

  23. Camacho C, Coulouris G, Avagyan V, Ma N, Papadopoulos J, Bealer K, et al. BLAST+: Architecture and applications. BMC Bioinformatics. 2009; 10:421.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  24. Queiroz K. Phylogenetic definitions and taxonomic philosophy. Biol Philos. 1992; 7(3):295–313.

    Article  Google Scholar 

  25. Pertsemlidis A, Fondon III JW. Having a BLAST with bioinformatics (and avoiding BLASTphemy). Genome Biol. 2001; 2(10):2002–110.

    Article  Google Scholar 

  26. Koski LB, Golding GB. The closest BLAST hit is often not the nearest neighbor. J Mol Evol. 2001; 52(6):540–542.

    Article  CAS  PubMed  Google Scholar 

  27. Keller PM, Rampini SK, Büchler AC, Eich G, Wanner RM, Speck RF, et al. Recognition of potentially novel human disease-associated pathogens by implementation of systematic 16S rRNA gene sequencing in the diagnostic laboratory. J Clin Microbiol. 2010; 48(9):3397–3402.

    Article  PubMed  PubMed Central  Google Scholar 

  28. Cole JR. The Ribosomal Database Project (RDP-II): Previewing a new autoaligner that allows regular updates and the new prokaryotic taxonomy. Nucleic Acids Res. 2003; 31(1):442–443.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  29. Janda JM, Abbott SL. 16S rRNA gene sequencing for bacterial identification in the diagnostic laboratory: Pluses, perils, and pitfalls. J Clin Microbiol. 2007; 45(9):2761–2764.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  30. Schloss PD. The effects of alignment quality, distance calculation method, sequence filtering, and region on the analysis of 16S rRNA gene-based studies. PLoS Comput Biol. 2010; 6(7):1000844.

    Article  CAS  Google Scholar 

  31. Stackebrandt E, Frederiksen W, Garrity GM, Grimont PAD, Kampfer P, Maiden MCJ, et al. Report of the ad hoc committee for the re-evaluation of the species definition in bacteriology. Int J Syst Evol Microbiol. 2002; 52(3):1043–1047.

    CAS  PubMed  Google Scholar 

  32. Gevers D, Cohan FM, Lawrence JG, Spratt BG, Coenye T, Feil EJ, et al. Opinion: Re-evaluating prokaryotic species. Nature Rev Microbiol. 2005; 3(9):733–739.

    Article  CAS  Google Scholar 

  33. Payne GW, Vandamme P, Morgan SH, Lipuma JJ, Coenye T, Weightman AJ, et al. Development of a recA gene-based identification approach for the entire Burkholderia genus. Appl Environ Microbiol. 2005; 71(7):3917–3927.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  34. Berger BJ, Knodel MH. Characterisation of methionine adenosyltransferase from Mycobacterium smegmatis and M. tuberculosis. BMC Microbiol. 2001; 3:12.

    Article  Google Scholar 

  35. Valiunas D, Jomantiene R, Davis RE. Evaluation of the DNA-dependent RNA polymerase β-subunit gene (rpoB) for phytoplasma classification and phylogeny. Int J Syst Evol Microbiol. 2013; 63(Pt 10):3904–3914.

    Article  CAS  PubMed  Google Scholar 

  36. Hung WC, Tseng SP, Chen HJ, Tsai JC, Chang CH, Lee TF. Use of groESL as a target for identification of Abiotrophia, Granulicatella, and Gemella species. J Clin Microbiol. 2010; 48(10):3532–3538.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  37. Naser S, Thompson FL, Hoste B, Gevers D, Vandemeulebroecke K, Cleenwerck I, et al. Phylogeny and identification of enterococci by atpA gene sequence analysis. J Clin Microbiol. 2005; 43(5):2224–2230.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  38. Cattoir V, Lemenand O, Avril J-L, Gaillot O. The sodA gene as a target for phylogenetic dissection of the genus Haemophilus and accurate identification of human clinical isolates. Int J Med Microbiol. 2006; 296(8):531–540.

    Article  CAS  PubMed  Google Scholar 

  39. Benson DA, Karsch-Mizrachi I, Clark K, Lipman DJ, Ostell J, Sayers EW. GenBank. Nucleic Acids Res. 2012; 40(Database issue):48–53.

    Article  CAS  Google Scholar 

  40. Maidak BL, Olsen GJ, Larsen N, Overbeek R, McCaughey MJ, Woese CR. The RDP (Ribosomal Database Project). Nucleic Acids Res. 1997; 25(1):109–111.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  41. Cole JR, Chai B, Farris RJ, Wang Q, Kulam SA, McGarrell DM, et al. The Ribosomal Database Project (RDP-II): Sequences and tools for high-throughput rRNA analysis. Nucleic Acids Res. 2005; 33(Database Issue):294–296.

    Article  CAS  Google Scholar 

  42. Devulder G, Perrière G, Baty F, Flandrois JP. BIBI, a Bioinformatics Bacterial Identification Tool. J Clin Microbiol. 2003; 41(4):1785–1787.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  43. Tamura K, Peterson D, Peterson N, Stecher G, Nei M, Kumar S. MEGA5: Molecular evolutionary genetics analysis using maximum likelihood, evolutionary distance, and maximum parsimony methods. Mol Biol Evol. 2011; 28(10):2731–2739.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  44. Gouy M, Guindon S, Gascuel O. SeaView version 4: A multiplatform graphical user interface for sequence alignment and phylogenetic tree building. Mol Biol Evol. 2010; 27(2):221–224.

    Article  CAS  PubMed  Google Scholar 

  45. Ludwig W, Strunk O, Westram R, Richter L, Meier H, Buchner A, et al. ARB: A software environment for sequence data. Nucleic Acids Res. 2004; 32(4):1363–1371.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  46. Woo PCY, Ng KHL, Lau SKP, Yip KT, Fung AMY, Leung KW, et al. Usefulness of the MicroSeq 500 16S ribosomal DNA-based bacterial identification system for identification of clinically significant bacterial isolates with ambiguous biochemical profiles. J Clin Microbiol. 2003; 41(5):1996–2001.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  47. Woo PC, Lau SK, Teng JL, Tse H, Yuen KY. Then and now: Use of 16S rDNA gene sequencing for bacterial identification and discovery of novel bacteria in clinical microbiology laboratories. Clin Microbiol Infect. 2008; 14(10):908–934.

    Article  CAS  PubMed  Google Scholar 

  48. Lamy B, Laurent F, Kodjo A. Validation of a partial rpoB gene sequence as a tool for phylogenetic identification of aeromonads isolated from environmental sources. Can J Microbiol. 2010; 56(3):217–228.

    Article  CAS  PubMed  Google Scholar 

  49. Moore DF, Zhowandai MH, Ferguson DM, McGee C, Mott JB, Stewart JC. Comparison of 16S rRNA sequencing with conventional and commercial phenotypic techniques for identification of enterococci from the marine environment. J Appl Microbiol. 2006; 100(6):1272–1281.

    Article  CAS  PubMed  Google Scholar 

  50. La Duc MT, Kern R, Venkateswaran K. Microbial monitoring of spacecraft and associated environments. Microb Ecol. 2004; 47(2):150–158.

    Article  CAS  PubMed  Google Scholar 

  51. Boivin-Jahns V, Bianchi A, Ruimy R, Garcin J, Daumas S, Christen R. Comparison of phenotypical and molecular methods for the identification of bacterial strains isolated from a deep subsurface environment. Appl Environ Microbiol. 1995; 61(11):3400–3406.

    CAS  PubMed  PubMed Central  Google Scholar 

  52. Moissl C, Osman S, La Duc MT, Dekas A, Brodie E, DeSantis T, et al. Molecular bacterial community analysis of clean rooms where spacecraft are assembled. FEMS Microbiol Ecol. 2007; 61:509–521.

    Article  CAS  PubMed  Google Scholar 

  53. Van Camp G, Chapelle S, De Wachter R. Amplification and sequencing of variable regions in bacterial 23S ribosomal RNA genes with conserved primer sequences. Curr Microbiol. 2013; 27(3):147–151.

    Article  Google Scholar 

  54. Hunt DE, Klepac-Ceraj V, Acinas SG, Gautier C, Bertilsson S, Polz MF. Evaluation of 23S rRNA PCR primers for use in phylogenetic studies of bacterial diversity. Appl Environ Microbiol. 2006; 72(3):2221–2225.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  55. Christen R. Identifications of pathogens — a bioinformatic point of view. Curr Opin Biotechnol. 2008; 19(3):266–273.

    Article  CAS  PubMed  Google Scholar 

  56. Adékambi T, Drancourt M, Raoult D. The rpoB gene as a tool for clinical microbiologists. Trends Microbiol. 2009; 17(1):37–45.

    Article  CAS  PubMed  Google Scholar 

  57. McTaggart LR, Richardson SE, Witkowska M, Zhang SX. Phylogeny and identification of Nocardia species on the basis of multilocus sequence analysis. J Clin Microbiol. 2010; 48(12):4525–4533.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  58. Bishop CJ, Aanensen DM, Jordan GE, Kilian M, Hanage WP, Spratt BG. Assigning strains to bacterial species via the internet. BMC Biol. 2009; 7:3.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  59. Martens M, Dawyndt P, Coopman R, Gillis M, De Vos P, Willems A. Advantages of multilocus sequence analysis for taxonomic studies: A case study using 10 housekeeping genes in the genus Ensifer (including former Sinorhizobium). Int J Syst Evol Microbiol. 2008; 58(Pt 1):200–214.

    Article  CAS  PubMed  Google Scholar 

  60. Kim H, Kim SH, Shim TS, Kim MN, Bai GH, Park YG, et al. Differentiation of Mycobacterium species by analysis of the heat-shock protein 65 gene (hsp65). Int J Syst Evol Microbiol. 2005; 55(Pt 4):1649–1656.

    Article  CAS  PubMed  Google Scholar 

  61. Mignard S, Flandrois JP. Identification of Mycobacterium using the EF-Tu encoding (tuf) gene and the tmRNA encoding (ssrA) gene. J Med Microbiol. 2007; 56(Pt 8):1033–1041.

    Article  CAS  PubMed  Google Scholar 

  62. Mulet M, Bennasar A, Lalucat J, García-Valdés E. An rpoD-based PCR procedure for the identification of Pseudomonas species and for their detection in environmental samples. Mol Cell Probes. 2009; 23(3–4):140–147.

    Article  CAS  PubMed  Google Scholar 

  63. Poyart C, Quesne G, Boumaila C, Trieu-Cuot P. Rapid and accurate species-level identification of coagulase-negative Staphylococci by using the sodA gene as a target. J Clin Microbiol. 2001; 39(12):4296–4301.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  64. Mende DR, Sunagawa S, Zeller G, Bork P. Accurate and universal delineation of prokaryotic species. Nat Methods. 2013; 10(9):881–884.

    Article  CAS  PubMed  Google Scholar 

  65. Segata N, Börnigen D, Morgan X, Huttehower C, Segata N, Börnigen D, et al. PhyloPhlAn is a new method for improved phylogenetic and taxonomic placement of microbes,. Nat Comm. 2013; 4:3304.

    Article  CAS  Google Scholar 

  66. Cattoir V, Kobal A, Legrand P. Aerococcus urinae and Aerococcus sanguinicola, two frequently misidentified uropathogens. Scand J Infect Dis. 2010; 42(10):775–780.

    Article  CAS  PubMed  Google Scholar 

  67. Mendes RE, Denys GA, Fritsche TR, Jones RN. Case report of Aurantimonas altamirensis bloodstream infection. J Clin Microbiol. 2009; 47(2):514–515.

    Article  PubMed  Google Scholar 

  68. Bachy B, Bemer P, Tortellier L, Giraudeau C, Reynaud A, Corvec S. Septic arthritis due to a Sneathia species most closely related to Sneathia sanguinegens. J Med Microbiol. 2011; 60(11):1693–1696.

    Article  CAS  PubMed  Google Scholar 

  69. Porte L, Soto A, Andrighetti D, Dabanch J, Braun S, Saldivia A, et al. Catheter-associated bloodstream infection caused by Leifsonia aquatica in a haemodialysis patient: A case report. J Med Microbiol. 2012; 61(Pt 6):868–873.

    Article  PubMed  Google Scholar 

  70. Jung A. Hepatitis bei Legehennen, verursacht durch gleichzeitige Infektion mit Gallibacterium anatis und Ascaridia galli — Fallbericht. Prakt Tierarzt. 2012; 3(93):246–250.

    Google Scholar 

  71. Jung A, Jung-Schroers V. Detection of Deefgea chitinilytica in freshwater ornamental fish. Lett Appl Microbiol. 2011; 52(5):497–500.

    Article  CAS  PubMed  Google Scholar 

  72. Jung A, Ryll M, Rautenschlein S. Bedeutung und Diagnostik ausgewählter bakterieller Erreger des Geflügels. Tieraerztl Prax Großtiere. 2012; 40(2):94–100.

    CAS  Google Scholar 

  73. Tardy F, Gaurivaud P, Manso-Silván L, Thiaucourt F, Pellet MP, Mercier P, et al. Extended surveillance for CBPP in a free country: Challenges and solutions regarding the potential caprine reservoir. Prev Vet Med. 2011; 101(1–2):89–95.

    Article  PubMed  Google Scholar 

  74. Chai N, Deforges L, Sougakoff W. Mycobacterium szulgai infection in a captive population of African clawed frogs (Xenopus tropicalis). J Zoo Wildl Med. 2006; 37(1):55–58.

    Article  PubMed  Google Scholar 

  75. Daubié AS, Defrance C, Renvoisé A, Barreda E, D’Alessandro C, Brossier F, et al. Illustration of the difficulty of identifying Streptococcus equi strains at the subspecies level through a case of endocarditis in an immunocompetent man. J Clin Microbiol. 2014; 52(2):688–691.

    Article  PubMed  PubMed Central  Google Scholar 

  76. Xia Y, Greissworth E, Mucci C, Williams MA, De Bolt S. Characterization of culturable bacterial endophytes of switchgrass (Panicum virgatum L,) and their capacity to influence plant growth. GCB Bioenergy. 2013; 5(6):674–682.

    Article  Google Scholar 

  77. Vázquez S, Nogales B, Ruberto L, Mestre C, Christie-Oleza J, Ferrero M. Characterization of bacterial consortia from diesel-contaminated Antarctic soils: Towards the design of tailored formulas for bioaugmentation. Int Biodeterior Biodegrad. 2013; 77:22–30.

    Article  CAS  Google Scholar 

  78. Kemp M, Jensen KH, Dargis R. Routine ribosomal PCR and DNA sequencing for detection and identification of bacteria. Future Microbiol. 2010; 5(7):1101–1107.

    Article  CAS  PubMed  Google Scholar 

  79. Kong F, Chen SC, Chen X, Sintchenko V, Halliday C, Cai L, et al. Assignment of reference 5’-end 16S rDNA sequences and species-specific sequence polymorphisms improves species identification of Nocardia. Open Microbiol J. 2009; 3:97–105.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  80. Perrière G. Bioinformatics in the complete genome sequence era. Biochimie. 2008; 90(4):553–554.

    Article  CAS  PubMed  Google Scholar 

  81. Raoult D, Fournier PE, Drancourt M. What does the future hold for clinical microbiology?Nat Rev Microbiol. 2004; 2(2):151–159.

    Article  CAS  PubMed  Google Scholar 

  82. Fisher TW, Garczynski SF. Isolation, culture, preservation, and identification of entomopathogenic bacteria of the Bacilli In: Lacey LA, editor. Manual of Techniques in Invertebrate Pathology. London: Academic Press: 2012. p. 75–98.

    Google Scholar 

  83. Park KS, Ki CS, Kang CI, Kim YJ, Chung DR, Peck KR, et al. Evaluation of the GenBank, EzTaxon, and BIBI services for molecular identification of clinical blood culture isolates that were unidentifiable or misidentified by conventional methods. J Clin Microbiol. 2012; 50(5):1792–1795.

    Article  PubMed  PubMed Central  Google Scholar 

  84. Gouy M, Gautier C, Attimonelli M, Lanave C, di Paola G. ACNUC – a portable retrieval system for nucleic acid sequence databases: Logical and physical designs and usage. Comput Applic Biosci. 1985; 1(3):167–172.

    CAS  Google Scholar 

  85. Gouy M, Delmotte S. Remote access to ACNUC nucleotide and protein sequence databases at PBIL. Biochimie. 2008; 90(4):555–562.

    Article  CAS  PubMed  Google Scholar 

  86. Parte AC. LPSN — list of prokaryotic names with standing in nomenclature. Nucleic Acids Res. 2014; 42(Database issue):613–616.

    Article  CAS  Google Scholar 

  87. Katoh K, Asimenos G, Toh H. Multiple alignment of DNA sequences with MAFFT In: Posada D, editor. Bioinformatics for DNA Sequence Analysis Methods in Molecular Biology. New York: Humana Press: 2009. p. 39–64.

    Google Scholar 

  88. Criscuolo A, Gribaldo S. BMGE (Block Mapping and Gathering with Entropy): A new software for selection of phylogenetic informative regions from multiple sequence alignments. BMC Evol Biol. 2010; 10(17):210.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  89. Price MN, Dehal PS, Arkin AP. FastTree 2 — approximately maximum-likelihood trees for large alignments. PLoS ONE. 2010; 5(3):9490.

    Article  CAS  Google Scholar 

  90. Tavare S. Some probabilistic and statistical problems in the analysis of DNA sequences. In: Lectures on Mathematics in the Life Sciences. New York: American Mathematical Society: 1986. p. 57–86.

    Google Scholar 

  91. Shimodaira H, Hasegawa M. Multiple comparisons of log-likelihoods with applications to phylogenetic inference. Mol Biol Evol. 1999; 16(8):1114–1116.

    Article  CAS  Google Scholar 

  92. Desper R, Gascuel O. Theoretical foundation of the balanced minimum evolution method of phylogenetic inference and its relationship to weighted least-squares tree fitting. Mol Biol Evol. 2004; 21(3):587–598.

    Article  CAS  PubMed  Google Scholar 

  93. Saitou N, Nei M. The neighbor-joining method: A new method for reconstructing phylogenetic trees. Mol Biol Evol. 1987; 4(4):406–425.

    CAS  PubMed  Google Scholar 

  94. Nawrocki EP, Kolbe DL, Eddy SR. Infernal 1.0: Inference of RNA alignments. Bioinformatics. 2009; 25(10):1335–1337.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  95. Bruno WJ, Socci ND, Halpern AL. Weighted neighbor joining: A likelihood-based approach to distance-based phylogeny reconstruction. Mol Biol Evol. 2000; 17(1):189–197.

    Article  CAS  PubMed  Google Scholar 

  96. Dereeper A, Guignon V, Blanc G, Audic S, Buffet S, Chevenet F, et al. Phylogeny.fr: Robust phylogenetic analysis for the non-specialist. Nucleic Acids Res. 2008; 36(Web Server issue):465–469.

    Article  CAS  Google Scholar 

  97. Chevenet F, Brun C, Bañuls A-L, Jacq B, Christen R. TreeDyn: towards dynamic graphics and annotations for analyses of trees. BMC Bioinformatics. 2006; 7(1):439.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  98. Pin D, Guérin-Faublée V, Garreau V, Breysse F, Dumitrescu O, Flandrois J-P, et al. Mycobacterium species related to M. leprae and M. lepromatosis from cows with bovine nodular thelitis. Emerg Infect Dis. 2014; 20:2111–2114.

    Article  PubMed  PubMed Central  Google Scholar 

Download references

Acknowledgements

We thank Céline Brochier-Armanet for useful discussions on alignment trimming methods and phylogeny, and Stéphane Delmotte for the conception and management of the server. We thank the LBBE/PRABI for providing access to the sequence repository collections.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jean-Pierre Flandrois.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

JPF and GP conceived the project; JPF designed the concept and implemented the system and website; JPF implemented the data extraction and the resulting database; MG implemented the SEAVIEW line command used by leBIBIQBPP; JPF, GP and MG have discussed of the system during its development; JPF, MG and GP wrote the manuscript. All authors read and approve the final manuscript.

Additional files

Additional file 1

Phylogenetic placement of an undescribed bacterial sequence. The analysis of a short SSU rDNA gene fragment of an unknown bacterium using the “stringent” database with 50 recruited sequences led to an unexpected phylogenetic tree with multiple warnings. (784 Kb)

Additional file 2

Improvement of the phylogenetic placement of an undescribed bacterial sequence. When the short SSU rDNA gene fragment of an unknown bacterium is studied with 100 recruited sequences, the interpretation is greatly improved especially through the recruitment of an outgroup sequence. (781 Kb)

Additional file 3

Phylogenetic placement of an undescribed bacterial sequence using another gene and database. The query sequence is suspected to be a new species of Mycobacterium. This was confirmed by the analysis of the rpoB sequence obtained from the same bacterial extract and the rpoB “stringent” database. (773 Kb)

Additional file 4

Placing bacteria cultivated from tap water in the phylogeny. A set of 44 partial SSU rDNA sequences have been obtained from bacteria cultivated from filtrated ion-exchanged tap water. The 44 sequences have been processed batch-wise. The html file is the concatenation of the 44 reports. It is stored in the “globalbibiresults.html” in the result directory. (5 529 Kb)

Rights and permissions

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Flandrois, JP., Perrière, G. & Gouy, M. leBIBIQBPP: a set of databases and a webtool for automatic phylogenetic analysis of prokaryotic sequences. BMC Bioinformatics 16, 251 (2015). https://0-doi-org.brum.beds.ac.uk/10.1186/s12859-015-0692-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s12859-015-0692-z

Keywords