Skip to main content
Download PDF
  • Methodology article
  • Open access
  • Published:

Rapid detection of Salmonella in food and feed by coupling loop-mediated isothermal amplification with bioluminescent assay in real-time

BMC Microbiology volume 16, Article number: 112 (2016) Cite this article

Abstract

Background

Salmonella is among the most significant pathogens causing food and feed safety concerns. This study examined the rapid detection of Salmonella in various types of food and feed samples by coupling loop-mediated isothermal amplification (LAMP) with a novel reporter, bioluminescent assay in real-time (BART). Performance of the LAMP-BART assay was compared to a conventional LAMP and the commercially available 3M Molecular Detection Assay (MDA) Salmonella.

Results

The LAMP-BART assay was 100 % specific among 178 strains (151 Salmonella and 27 non-Salmonella) tested. The detection limits were 36 cells per reaction in pure culture and 104 to 106 CFU per 25 g in spiked food and feed samples without enrichment, which were comparable to those of the conventional LAMP and 3M MDA Salmonella but 5–10 min faster. Ground turkey showed a strong inhibition on 3M MDA Salmonella, requiring at least 108 CFU per 25 g for detection. The correlation between Salmonella cell numbers and LAMP-BART signals was high (R 2 = 0.941–0.962), suggesting good quantification capability. After 24 h enrichment, all three assays accurately detected 1 to 3 CFU per 25 g of Salmonella among five types of food (cantaloupe, ground beef, ground turkey, shell eggs, and tomato) and three types of feed (cattle feed, chicken feed, and dry dog food) examined. However, 101 CFU per 25 g was required for cattle feed when tested by 3M MDA Salmonella.

Conclusions

The Salmonella LAMP-BART assay was rapid, specific, sensitive, quantitative, and robust. Upon further validation, it may become a valuable tool for routine screening of Salmonella in various types of food and feed samples.

Background

Nontyphoidal Salmonella is a zoonotic agent of significant food and feed safety concerns. In the United States, an estimated 1 million cases of foodborne salmonellosis occur each year, resulting in the highest numbers of hospitalizations and deaths among 31 major pathogens [1]. Salmonella also represented the leading cause of foodborne disease outbreaks during 1998–2012, with 77 % of illnesses broadly attributed across multiple food commodities, including produce, eggs, poultry, and meats [2]. Moreover, Salmonella remains a major microbial hazard in animal feed and pet food [3]. The safety of these feed commodities impacts not only animal health but also the health of humans consuming foods of animal origin or handling pet food [4]. For instance, several multistate outbreaks of human salmonellosis linked to tainted pet food have been reported recently [5].

To reduce Salmonella outbreaks and illnesses associated with food and feed products, a multifaceted approach from farm to table is required. Methods that can quickly and reliably detect Salmonella in these commodities are especially valuable in order to promptly identify contamination problems along the production chain. However, rapid, reliable, and robust detection of Salmonella in food and feed remains elusive [6]. Conventional culture methods are reliable but time consuming and labor intensive, taking days even weeks for a definitive result [7]. A growing number of molecular methods, including PCR and real-time quantitative PCR (qPCR) have been developed and applied to detect Salmonella in a variety of food and feed products [8–11]. Despite being rapid, specific, and sensitive, PCR-based nucleic acid amplification tests (NAATs) require a sophisticated thermal cycling instrument and are also susceptible to inhibitors in food and feed matrices [12, 13], limiting their wider application.

Recently, an isothermal NAAT termed loop-mediated isothermal amplification (LAMP) has emerged as a promising alternative to PCR for the detection of Salmonella in food [14–17]. LAMP employs four to six specially designed primers and a strand-displacing Bst DNA polymerase to amplify up to 109 copies of target DNA within an hour [18, 19]. Two distinct advantages of LAMP over PCR are running at a constant temperature (~65 °C) and tolerance to assay inhibitors [20, 21], which eliminate the need for a thermocycler or complicated sample preparation steps. Other attractive features of LAMP include high specificity, sensitivity, speed, and robustness [16, 22]. Nonetheless, LAMP has not yet been evaluated in feed samples, which encompass a group of rather diverse and complex matrices.

Efficient sample analysis with LAMP depends not only on the performance of DNA amplification but also the method used for monitoring the reaction [23]. To date, multiple techniques have been used to detect LAMP products, including naked eye, gel electrophoresis, turbidity, fluorescence, among others [23]. Bioluminescent monitoring of LAMP products was demonstrated recently via a novel reporter, bioluminescent assay in real-time (BART) [24]. In essence, BART monitors the inorganic pyrophosphate produced during the LAMP reaction by converting it to ATP which is simultaneously utilized by firefly luciferase to emit light [24]. The time needed to reach peak light output is reflective of the concentration of original target DNA; therefore, LAMP-BART allows real-time quantification with a simple, portable light detector [24]. When applied in detecting genetically modified maize, LAMP-BART was shown to be an effective and sensitive technique with significant potential for quantification [25]. A commercially available 3M molecular detection assay (MDA) Salmonella (3M Food Safety, St. Paul, MN) also builds upon the LAMP-BART technology.

In this study, we aimed to develop and optimize an in-house Salmonella LAMP-BART assay and to apply the assay in various types of food and feed samples. The assay’s performance was compared with that of a conventional LAMP assay and the commercially available 3M MDA Salmonella.

Results

The optimized LAMP-BART assay

The final LAMP-BART reaction mix in a total volume of 25 μl contained all core reagents listed in the Methods section and two (polyvinylpyrrolidone (PVP) and trehalose) out of the four facilitators evaluated. KCl was excluded from the mixture due to significantly greater T max values when added individually or in combination with other facilitators (P < 0.001). Dithiothreitol (DTT) was not included since it did not improve the overall assay performance in terms of T max values or false positive rates. It is noteworthy that trehalose, when added alone or together with other facilitators, consistently gave the optimum assay performance. Fig. 1 shows the amplification graphs when running the assays with the optimized reagent mix compared to the prototypic one. Besides decreased T max values (17 versus 37 min), the light intensity was also greater using the optimized mix.

Fig. 1
figure 1

LAMP-BART amplification graphs generated when running the assays with optimized or prototypic reagent mixes. Samples 1 to 2 and 3 to 4 were run using optimized and prototypic [24, 25] reagent mixes, respectively. Sample 5 to 6 and 7 to 8 were water samples run using the optimized and prototypic mixes, respectively

Full size image

Assay specificity

All three assays (LAMP-BART, conventional LAMP, and 3M MDA Salmonella) demonstrated 100 % specificity when testing the 178 bacterial strains. For the 151 Salmonella strains of 100 serovars, the mean T max values ranged from 8.1 to 17 min with an average of 11.1 ± 1.6 min by LAMP-BART and from 14.8 to 27 min with an average of 18 ± 2.3 min by 3M MDA Salmonella, whereas the mean T t values ranged from 12.6 to 25.4 min with an average of 15 ± 2.3 min by conventional LAMP. The overall ranking of assay rapidity was LAMP-BART > conventional LAMP > 3M MDA Salmonella (P < 0.0001). For the 27 non-Salmonella strains, no T max or T t value was obtained, suggesting negative results by all three assays.

Assay sensitivity and quantification capability

Figure 2 presents the sensitivity and quantification capability of these assays when testing 10-fold serial dilutions of S. Typhimurium LT2 DNA templates ranging from 3.6 × 106 to 3.6 CFU/reaction. Representative amplification graphs and corresponding standard curves are shown in Fig. 2a-c and d, respectively. All three assays consistently detected down to 36 CFU of Salmonella per reaction in five repeats, with average T max values ranging from 11.9 to 18.1 min by LAMP-BART and from 18.9 to 37.9 by 3M MDA Salmonella, and average T t values ranging from 14.8 to 25.2 min by conventional LAMP. In three out of five repeats, LAMP-BART and conventional LAMP also detected 3.6 Salmonella cells per reaction while 3M MDA Salmonella detected this level in two repeats (data not shown).

Fig. 2
figure 2

The sensitivity and quantification capability of LAMP-BART, conventional LAMP, and 3M MDA Salmonella when testing 10-fold serial dilutions of Salmonella enterica serovar Typhimurium LT2 cultures. (a-c) Representative amplification graphs obtained by LAMP-BART (a), conventional LAMP (b), and 3M MDA Salmonella (c). Samples 1 to 7 correspond to 10-fold serial dilutions of S. Typhimurium LT2 cells ranging from 3.6 × 106 to 3.6 CFU/reaction; sample 8 is water. (d) Standard curves generated based on five independent repeats by LAMP-BART (bottom), conventional LAMP (middle), and 3M MDA Salmonella (top)

Full size image

Based on the standard curves generated (Fig. 2d), linear relationships were observed for templates ranging from 3.6 × 106 to 3.6 × 102 CFU/reaction with correlation coefficients (R 2) at 0.941, 0.967, and 0.929 for LAMP-BART, conventional LAMP, and 3M MDA Salmonella, respectively. When taking into consideration the 36 CFU/reaction level, the R 2 values dropped to 0.875 and 0.727 for conventional LAMP and 3M MDA Salmonella, respectively, but increased to 0.962 for LAMP-BART (data not shown).

Rapid and sensitive detection of Salmonella in spiked food and feed samples

All of the uninoculated controls tested negative for Salmonella (data not shown). Aerobic plate counts among food types averaged 102-103 CFU/g in cantaloupe and tomato, 104 CFU/g in ground beef and ground turkey, and non-detectable (< 102 CFU/g) in shell eggs. Among feed types, the aerobic plate counts averaged 102 CFU/g in dog food, 103 CFU/g in chicken feed, and 104 CFU/g in cattle feed.

Table 1 summarizes the sensitivity of all three assays when testing 10-fold serial dilutions of Salmonella strains of various serovars in spiked food and feed samples based on three independent repeats. In the majority of food types, the detection limits for LAMP-BART and conventional LAMP were around 2 × 104 CFU per 25 g (ca. 8 × 102 CFU/g, equivalent to 1.6 CFU/reaction) except in ground turkey and ground beef, for which the detection limits were 10-fold higher. In one or two out of three repeats, conventional LAMP and LAMP-BART, respectively, achieved positive results in ground beef at the 2× 104 CFU/25 g level. The 3M MDA Salmonella assay was capable of detecting 104 CFU per 25 g in shell eggs and tomato in some repeats but required at least 105 CFU/25 g in cantaloupe and ground beef and as high as 108 CFU/25 g in ground turkey. In feed samples, regardless of feed type, all three assays required at least 105 CFU/25 g for detection and 106 CFU/25 g was consistently needed to detect Salmonella Newport 1240 H in cattle feed by 3M MDA Salmonella (Table 1).

Table 1 The sensitivity of LAMP-BART, conventional LAMP, and 3M MDA Salmonella in spiked food and feed samples based on three independent repeats
Full size table

Figure 3 shows the detection of low-level (1 to 3 CFU/25 g) Salmonella of various serovars in spiked food and feed samples after 24 h enrichment based on three independent repeats. Regardless of food or feed type, LAMP-BART consistently gave the lowest T max values compared to the other two assays (P < 0.0001). For the vast majority of food and feed types, all three assays achieved successful detection in all three repeats. In cattle feed, positive detection of Salmonella Newport 1240 H only occurred in one repeat each by LAMP-BART and conventional LAMP but none by 3M MDA Salmonella. When 10-fold higher concentration of this strain was spiked in cattle feed, positive results were returned in all three repeats with mean T max values of 17.8 and 27.1 min for LAMP-BART and 3M MDA Salmonella, respectively, and a mean T t value of 22.2 min for conventional LAMP (data not shown). Interestingly, T max or T t values obtained by all three assays were significantly higher when testing feed types compared to food types (P < 0.001).

Fig. 3
figure 3

Comparison of LAMP-BART (green bars), conventional LAMP (blue bars), and 3M MDA Salmonella (yellow bars) in detecting low-level (1 to 3 CFU/25 g) Salmonella strains of various serovars in spiked food and feed samples after 24 h enrichment based on three independent repeats. * In cattle feed, positive detection of Salmonella Newport 1240 H only occurred in one repeat each by LAMP-BART and conventional LAMP but none by 3M MDA Salmonella. Bars labeled with different lower case letters within the same food or feed type indicate statistically significant T max or T t values generated by LAMP-BART, conventional LAMP, and 3M MDA Salmonella (P < 0.05)

Full size image

Discussion

Coupling a promising isothermal NAAT with a novel bioluminescent reporter, the Salmonella LAMP-BART assay developed in this study was rapid (8–45 min), specific (100 % inclusivity and exclusivity among 178 strains tested), sensitive (36 cells/reaction in pure culture and 104-106 CFU/25 g in spiked food and feed), quantitative (R 2 = 0.941–0.962), and robust (applicable in eight types of food or feed matrices). After 24 h enrichment, the assay accurately detected 1–3 CFU/25 g of Salmonella in all food/feed types tested except cattle feed. This is the first study evaluating LAMP-BART for Salmonella detection in a large variety of food and feed samples.

Previously, the LAMP-BART combination has been successfully explored in detecting Chlamydia trachomatis, Clostridium difficile, and GMO [24–26] and forms the basis of several commercially available 3M MDAs [27]. A major advantage of BART over fluorescence or turbidity monitoring of LAMP reactions is the requirement of rather simple, robust, and low-cost hardware. For instance, a portable photodiode-based reader (Lumora Ltd, Cambridgeshire, UK) was used in the C. trachomatis, C. difficile, and GMO studies [24–26]. In the present study, the assay was conducted in a one-step, closed-tube format in the 3M MDS100 instrument providing temperature control (60 °C) for LAMP and bioluminescence readings for BART simultaneously. This feature of BART may potentially lead to the development of field-deployable assays that can be used in resource-limited areas.

The LAMP portion of the assay was essentially the same as the conventional LAMP included for comparison, which used slightly modified primer sequences (Table 2) from those published previously [14]. These modifications were necessary based on preliminary evaluation of the combined LAMP-BART performance (data not shown). It is notable that multiple LAMP assays have been recently developed and applied in detecting Salmonella in food, and reported to be rapid, specific, and sensitive [14–17, 28–30]. The invA-based LAMP was chosen in this study as the prototype for assay development and comparison purposes since it has been extensively evaluated in eggs and produce, and for robustness and comparison with qPCR [20, 31, 32].

Table 2 Primers used for detecting Salmonella by LAMP-BART and conventional LAMP, in comparison with the primer set published previously
Full size table

Besides LAMP reagents, the optimized LAMP-BART reaction mix contained four essential reagents for BART (adenosine 5′ phosphosulfate (APS) and ATP sulfurylase to convert inorganic pyrophosphate produced during the LAMP reaction to ATP, and luciferin and firefly luciferase to utilize ATP to generate light) and two (PVP and trehalose) out of four facilitators (DTT, KCl, PVP, and trehalose) described previously [24, 25]. This is the first study evaluating the effects of these facilitators on LAMP-based assays. In PCR reactions, both DTT and trehalose enhanced amplification efficiency by stabilizing the Taq DNA polymerase, while trehalose also lowered DNA melting temperature [33, 34]. PVP has been shown to enhance PCR by reversing the inhibitory effect of polyphenolic contaminants [35]. Increasing KCl concentrations in the PCR buffer has been reported to cause preferential amplification of shorter DNAs as longer DNAs denatured slower due to the stabilizing effect of potassium ions on the double-stranded structure [36]. Our data suggested the inclusion of PVP and trehalose but not DTT or KCl. Notably, the intermediate and final LAMP products are a mixture of stem-loop DNAs with various stem lengths [18]. The amplification of longer ones was likely inhibited by increased KCl in the mix, as indicated by significantly greater T max values when KCl was added.

In pure-culture testing, all three assays (LAMP-BART, conventional LAMP, and 3M MDA Salmonella) possessed similar specificity and sensitivity. LAMP-BART was consistently faster than conventional LAMP, while 3M MDA Salmonella was the slowest. Besides T max (time to the maximum value of the light output curve), the time to the first inflexion point of the curve (T infl ) could also be used to characterize the LAMP-BART amplification kinetics [24], further shortening the time taken to report positive results. The finding of 100 % specificity among 178 bacterial strains including all six subspecies of S. enterica and S. bongori corroborated previous reports on multiple Salmonella LAMP assays using various collections of bacterial strains [14, 15, 17, 28–32]. The detection limit of 36 CFU/reaction also fell within the range (1 to 40 cells per test) reported previously for multiple Salmonella LAMP assays [14, 15, 17, 20, 28–31]. The three LAMP-BART assays described recently had detection limits of 5.5 copies of C. trachomatis DNA, 10 copies of C. difficile DNA, and 40 copies of GMO target, respectively [24–26]. However, the detection limit of 3M MDA Salmonella in pure culture has not been reported.

Different from the sigmoidal shape typical of fluorescence and turbidity measurements, LAMP-BART possessed unique assay kinetics as shown in the bell-shape light output curves (Fig. 2), possibly leading to better quantification capability [24]. The Chlamydia LAMP-BART assay had an R 2 of 1 for DNA templates ranging from 102 to 108 copies per reaction, but the linearity was greatly compromised for templates below 102 copies [24]. In the present study, the LAMP-BART assay had R 2 of 0.941 for Salmonella cells ranging from 102 to 106 CFU/reaction and the value increased to 0.962 when the 101 CFU level was added. This was superior to either conventional LAMP or 3M MDA Salmonella. Previously, R 2 for conventional LAMP was 0.97 for Salmonella cells ranging from 102 to 105 CFU/reaction [14]. The 3M MDA Salmonella was designed to be a qualitative assay, i.e., presence or absence; therefore, its quantification capability has not been examined previously.

Among most food/feed types tested, the three assays detected down to 2 × 104 - 2 × 106 CFU/25 g (equivalent to 1.6 to 160 CFU/reaction) without enrichment, while 108 CFU/25 g was required by 3M MDA Salmonella for detection in ground turkey (Table 1). To our knowledge, this is the first time LAMP-based assays were evaluated in various feed samples and the second time in ground beef and ground turkey [37]. The reduced sensitivity (up to 100-fold) observed in these food/feed types suggested that relatively high background flora (indicated by APC) and/or complex matrices may have affected the assay performance. In particular, ground turkey with high average APC of 104 CFU/g showed a strong inhibition on the 3M MDA Salmonella where all matrix control samples returned negative results. A recent study comparing 3M MDA Salmonella and ISO 6579 for the detection of Salmonella in retail meat samples also reported inhibition of the 3M assay by a turkey meat preparation (turkey meatball) with many ingredients, possibly due to spice [37]. The ground turkey used in the present study contained 7 % fat, which may have negatively influenced the 3M MDA Salmonella outcome.

Coupled with enrichment, the three assays accurately detected 1–3 CFU/25 g of Salmonella in all food/feed types tested except in cattle feed when tested by 3M MDA Salmonella, for which 101 CFU per 25 g was required (Fig. 3). The findings in produce and shell eggs agreed with several recent reports on the capability of conventional LAMP in detecting low-level Salmonella in these food types [31, 32]. However, the detection of low-level Salmonella in feed samples has not been reported previously. Similar to the trend shown in food/feed sensitivity testing, all three assays were less effective (longer T max or T t ) in detecting feed samples than food samples, suggesting matrix effects caused by many ingredients commonly present in feed rations. This effect was even more apparent in cattle feed where only one repeat at the 100 CFU/25 g level was positive by LAMP-BART and conventional LAMP and none by 3M MDA Salmonella. Another recent study using 3M MDA Salmonella in water sources also showed it to be less effective than PCR in detecting Salmonella [38]. It is hypothesized that natural flora present in cattle feed or compounds released during processing may have affected Salmonella survival and growth during enrichment, causing the low sensitivity in detection. Further studies are warranted to optimize detection in feed commodities. Finally, agreeable with pure-culture testing data, LAMP-BART was consistently faster than conventional LAMP, while 3M MDA Salmonella was the slowest when food/feed samples were tested.

Conclusions

The Salmonella LAMP-BART assay developed in this study was rapid, specific, sensitive, quantitative, and robust. Upon further validation including independent validation and collaborative studies, it may become a valuable tool for routine screening of Salmonella in various types of food and feed samples.

Methods

Bacterial strains and culture conditions

Salmonella strains (n = 151) used in this study included all six subspecies (I, II, IIIa, IIIb, IV, and VI) of Salmonella enterica and Salmonella bongori, representing a total of 100 serovars. Non-Salmonella strains (n = 27) belonged to Campylobacter, Citrobacter, Enterobacter, Escherichia coli, Hafnia, Listeria, Shigella, and Vibrio. Detailed strain information was described previously [32]. Among Salmonella strains, S. enterica serovar Typhimurium LT2 was used for assay development and sensitivity testing, whereas S. enterica serovars Enteritidis S50, Heidelberg 1364 H, Infantis 1102 H, Newport 1240 H, Poona 2861 H, and Typhimurium LT2 were used in food and feed spiking experiments (Table 3). All bacterial strains were cultured on Trypticase soy agar or blood agar (BD Diagnostic Systems, Sparks, MD) at 35 °C overnight. Campylobacter strains were grown under microaerophilic conditions (85 % N2, 10 % CO2, and 5 % O2).

Table 3 Salmonella strains used in food and feed spiking experiments
Full size table

LAMP-BART assay design and optimization

LAMP primers targeting the Salmonella invasion gene (invA; GenBank: M90846) were designed by using PrimerExplorer V4 (Fujitsu Limited, Japan). Each primer set consisted of two outer (F3 and B3), two inner (FIP and BIP), and one to two loop primers (Loop-F and/or Loop-B). The final primer set (Sal4) chosen for the LAMP-BART assay is shown in Table 2.

Based on the prototypic LAMP-BART reaction described previously [24, 25], the optimum components of the Salmonella LAMP-BART assay were evaluated by testing core reagents first followed by adding individual or a combination of four facilitators. The core reagent mix in a total volume of 25 μl contained 1× ThermoPol reaction buffer (New England Biolabs, Ipswich, MA), 6 mM MgSO4, 1.2 mM each deoxynucleoside triphosphate (dNTP), 0.1 μM F3 and B3 (Integrated DNA Technologies, Coralville, IA), 1.8 μM FIP and BIP, 1 μM Loop-F and Loop-B, 100 μg/ml luciferin potassium salt (Sigma-Aldrich, St. Louis, MO), 0.25 mM APS (Sigma-Aldrich), 0.5 U/ml ATP sulfurylase (New England Biolabs), 5.6 μg/ml Ultra-Glo firefly luciferase (Promega, Madison, WI), 10 U of Bst DNA polymerase (New England Biolabs), and 2 μl of DNA template (S. Typhimurium LT2 at 1.8 × 106 CFU/ml). The four facilitators were DTT ( 10 mM), KCl (60 mM), PVP (0.4 mg/ml), and trehalose (87 mM), all obtained from Sigma-Aldrich. The optimization experiments were run in duplicate and repeated three times.

The LAMP-BART reaction was carried out at 60 °C for 75 min in the 3M Molecular Detection System instrument MDS100 (3M Food Safety, St. Paul, MN). Bioluminescent readings were acquired every 15 s and time to peak values (T max ; min) were determined when the light intensity reached the maximum value of the curve (Fig. 1).

Conventional LAMP

For comparison, a conventional invA-based Salmonella LAMP assay was run as described previously [14] using the Sal4 primer set. The reaction was conducted at 65 °C for 60 min and terminated at 80 °C for 5 min in a real-time turbidimeter LA-500 (Eiken Chemical Co., Ltd, Tokyo, Japan). Turbidity readings at 650 nm were obtained every 6 s and time threshold values (T t ; min) were determined when the turbidity increase measurements exceeded a threshold value of 0.15.

3M MDA Salmonella

The 3M MDA Salmonella assay was performed following the manufacturer’s instructions. Briefly, 2 μl of DNA template and 18 μl of molecular-grade water (in pure-culture testing) or 20 μl of spiked food/feed homogenate or enrichment broth (in food/feed testing) were added into a lysis tube, heated at 100 °C for 15 min, then cooled for 10 min in a pre-chilled chill block. After mixing and holding at room temperature for 5 min, 20 μl of the lysates was transferred to a reagent tube and a matrix control tube (in food/feed testing only) containing lyophilized reagents. The reaction was carried out at 60 °C for 75 min in the 3M MDS100 instrument. T max values were determined similarly as in the LAMP-BART assay.

Specificity and sensitivity

For specificity testing, DNA templates of the 151 Salmonella and 27 non-Salmonella strains were prepared by heating at 95 °C for 10 min. Aliquots (2 μl) were subjected to the three assays (LAMP-BART, conventional LAMP, and 3M MDA Salmonella) and repeated twice.

Assay sensitivity (limit of detection) was determined by using 10-fold serial dilutions of S. Typhimurium LT2 cultures. DNA templates were prepared from stationary-phase cultures as described previously [39]. Aliquots were tested by all three assays and repeated five times. Detection limits were defined as the lowest concentrations that tested positive in all five repeats.

Assay evaluation in spiked food and feed samples

Five types of food (cantaloupe, ground beef, ground turkey, shell eggs, and tomato) and three types of feed (cattle feed, chicken feed, and dry dog food) were examined. The food items were obtained from a local grocery store and processed as described previously [31, 32, 40]. The feed items were obtained from a local feed store and 25-g samples were apportioned for analysis. All food and feed samples were analyzed for the presence of Salmonella by conventional culture method [7] and confirmed negative samples were used for the following spiking experiments.

To determine assay sensitivity in each food or feed type, test portions (25 g) were inoculated with 1.5 ml of 10-fold serial dilutions of respective Salmonella overnight cultures (Table 3) as previously described [39], resulting in spiking levels between 108 and 104 CFU/25 g. Another sample was included as the uninoculated control, for which aerobic plate counts were performed. All samples were air-dried in a laminar flow biosafety cabinet for 2 h then homogenized with 225 ml of buffered peptone water (BPW; 3M Food Safety) for 2 min at high speed (260 rpm) in a food stomacher (Model 400; Seward Laboratory Systems, Inc., Davie, FL). For 3M MDA Salmonella, 20 μl of the homogenate was processed following the manufacturer’s instructions and the assay was repeated three times. For LAMP-BART and conventional LAMP, 1 ml of the homogenate were first centrifuged at 900 × g for 3 min to remove large particles, the supernatant transferred to a fresh tube, followed by another centrifugation at 16,000 × g for 3 min. The pellets were suspended in 100 μl of PrepMan Ultra sample preparation reagents (Applied Biosystems, Foster City, CA), heated at 95 °C for 10 min, cooled down to room temperature, and centrifuged again at 12,000 × g for 2 min. The supernatants (2 μl) were used for the assays, which were repeated three times.

The assay’s capability to detect low levels of Salmonella cells in these food and feed types were also evaluated. For this application, each test portion was inoculated similarly with respective Salmonella overnight cultures at 100 to 101 CFU/25 g. After homogenization in 225 ml of pre-warmed BPW, the samples were incubated at 35 °C for 24 h. Aliquots of the enrichment broth were processed similarly as described above and tested by all three assays. The low-level detection experiment was independently repeated three times.

Data analysis

Means and standard deviations of T max for LAMP-BART and 3M MDA Salmonella and T t for conventional LAMP were calculated by Microsoft Excel (Seattle, WA). The values were compared using the analysis of variance followed by post-hoc multiple comparisons using the Least Significant Difference (LSD) test (v9.1; SAS for Windows, Cary, NC) and differences were considered significant when P < 0.05. Standard curves to quantify Salmonella in pure culture were generated by plotting T max or T t values against log CFU/reaction, and linear regression was calculated using Microsoft Excel. Quantification capabilities of the assays were derived based on the correlation coefficient (R 2) values from the standard curves.

Abbreviations

APS, adenosine 5′ phosphosulfate; BART, bioluminescent assay in real-time; dNTP, deoxynucleoside triphosphate; DTT, dithiothreitol; GMO, genetically modified organism; LAMP, loop-mediated isothermal amplification; LSD, least significant difference; MDA, molecular detection assay; MDS, molecular detection system; NAAT, nucleic acid amplification test; PVP, polyvinylpyrrolidone; qPCR, real-time quantitative PCR.

References

  1. Scallan E, Hoekstra RM, Angulo FJ, Tauxe RV, Widdowson MA, Roy SL, et al. Foodborne illness acquired in the United States–major pathogens. Emerg Infect Dis. 2011;17:7–15.

  2. IFSAC [Interagency Food Safety Analytics Collaboration]. Foodborne illness source attribution estimates for Salmonella, Escherichia coli O157 (E. coli O157), Listeria monocytogenes (Lm), and Campylobacter using outbreak surveillance data. Washington, DC; 2015.

  3. Li X, Bethune LA, Jia Y, Lovell RA, Proescholdt TA, Benz SA, et al. Surveillance of Salmonella prevalence in animal feeds and characterization of the Salmonella isolates by serotyping and antimicrobial susceptibility. Foodborne Pathog Dis. 2012;9:692–8.

  4. Crump JA, Griffin PM, Angulo FJ. Bacterial contamination of animal feed and its relationship to human foodborne illness. Clin Infect Dis. 2002;35:859–65.

    Article  PubMed  Google Scholar 

  5. CDC. Reports of selected Salmonella outbreak investigations. http://www.cdc.gov/salmonella/outbreaks.html. Accessed 15 Jul 2015.

  6. Ge B, Meng J. Advanced technologies for pathogen and toxin detection in foods: current applications and future directions. J Assoc Lab Autom. 2009;14:235–41.

    Article  Google Scholar 

  7. Andrews WH, Jacobson A, Hammack TS. Bacteriological analytical manual. Chapter 5: Salmonella http://www.fda.gov/Food/FoodScienceResearch/LaboratoryMethods/ucm070149.htm. Accessed 15 Jul 2015.

  8. Balachandran P, Friberg M, Vanlandingham V, Kozak K, Manolis A, Brevnov M, et al. Rapid detection of Salmonella in pet food: design and evaluation of integrated methods based on real-time PCR detection. J Food Prot. 2012;75:347–52.

  9. Cheng CM, Lin W, Van KT, Phan L, Tran NN, Farmer D. Rapid detection of Salmonella in foods using real-time PCR. J Food Prot. 2008;71:2436–41.

    CAS  PubMed  Google Scholar 

  10. Malorny B, Lofstrom C, Wagner M, Kramer N, Hoorfar J. Enumeration of Salmonella bacteria in food and feed samples by real-time PCR for quantitative microbial risk assessment. Appl Environ Microbiol. 2008;74:1299–304.

    Article  CAS  PubMed  Google Scholar 

  11. Rahn K, De Grandis SA, Clarke RC, McEwen SA, Galan JE, Ginocchio C, et al. Amplification of an invA gene sequence of Salmonella typhimurium by polymerase chain reaction as a specific method of detection of Salmonella. Mol Cell Probes. 1992;6:271–9.

  12. Abu Al-Soud W, Radstrom P. Effects of amplification facilitators on diagnostic PCR in the presence of blood, feces, and meat. J Clin Microbiol. 2000;38:4463–70.

    CAS  PubMed  PubMed Central  Google Scholar 

  13. Maciorowski KG, Pillai SD, Jones FT, Ricke SC. Polymerase chain reaction detection of foodborne Salmonella spp. in animal feeds. Crit Rev Microbiol. 2005;31:45–53.

    Article  CAS  PubMed  Google Scholar 

  14. Chen S, Wang F, Beaulieu JC, Stein RE, Ge B. Rapid detection of viable salmonellae in produce by coupling propidium monoazide with loop-mediated isothermal amplification. Appl Environ Microbiol. 2011;77:4008–16.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  15. Hara-Kudo Y, Yoshino M, Kojima T, Ikedo M. Loop-mediated isothermal amplification for the rapid detection of Salmonella. FEMS Microbiol Lett. 2005;253:155–61.

    Article  CAS  PubMed  Google Scholar 

  16. Kokkinos PA, Ziros PG, Bellou M, Vantarakis A. Loop-mediated isothermal amplification (LAMP) for the detection of Salmonella in food. Food Anal Method. 2014;7:512–26.

    Article  Google Scholar 

  17. Zhang L, Pan ZM, Geng SZ, Chen X, Liu ZY, Zhao F, et al. A loop-mediated isothermal amplification method targets the hisJ gene for the detection of foodborne Salmonella. Eur Food Res Technol. 2012;234:1055–62.

  18. Notomi T, Okayama H, Masubuchi H, Yonekawa T, Watanabe K, Amino N, et al. Loop-mediated isothermal amplification of DNA. Nucleic Acids Res. 2000;28:E63.

  19. Nagamine K, Hase T, Notomi T. Accelerated reaction by loop-mediated isothermal amplification using loop primers. Mol Cell Probes. 2002;16:223–9.

    Article  CAS  PubMed  Google Scholar 

  20. Yang Q, Wang F, Prinyawiwatkul W, Ge B. Robustness of Salmonella loop-mediated isothermal amplification assays for food applications. J Appl Microbiol. 2014;116:81–8.

    Article  CAS  PubMed  Google Scholar 

  21. Kaneko H, Kawana T, Fukushima E, Suzutani T. Tolerance of loop-mediated isothermal amplification to a culture medium and biological substances. J Biochem Biophys Methods. 2007;70:499–501.

    Article  CAS  PubMed  Google Scholar 

  22. Mori Y, Notomi T. Loop-mediated isothermal amplification (LAMP): a rapid, accurate, and cost-effective diagnostic method for infectious diseases. J Infect Chemother. 2009;15:62–9.

    Article  CAS  PubMed  Google Scholar 

  23. Zhang X, Lowe SB, Gooding JJ. Brief review of monitoring methods for loop-mediated isothermal amplification (LAMP). Biosens Bioelectron. 2014;61:491–9.

    Article  CAS  PubMed  Google Scholar 

  24. Gandelman OA, Church VL, Moore CA, Kiddle G, Carne CA, Parmar S, et al. Novel bioluminescent quantitative detection of nucleic acid amplification in real-time. PLoS One. 2010;5:e14155.

  25. Kiddle G, Hardinge P, Buttigieg N, Gandelman O, Pereira C, McElgunn CJ, et al. GMO detection using a bioluminescent real time reporter (BART) of loop mediated isothermal amplification (LAMP) suitable for field use. BMC Biotechnol. 2012;12:15.

  26. McElgunn CJ, Pereira CR, Parham NJ, Smythe JE, Wigglesworth MJ, Smielewska A, et al. A low complexity rapid molecular method for detection of Clostridium difficile in stool. PLoS One. 2014;9:e83808.

  27. Bird P, Fisher K, Boyle M, Huffman T, Benzinger Jr MJ, Bedinghaus P, et al. Evaluation of 3M molecular detection assay (MDA) Salmonella for the detection of Salmonella in selected foods: collaborative study. J AOAC Int. 2013;96:1325–35.

  28. Lu Y, Yang W, Shi L, Li L, Alam MJ, Guo S, et al. Specific detection of viable Salmonella cells by an ethidium monoazide-loop mediated isothermal amplificaiton (EMA-LAMP) method. J Health Sci. 2009;55:820–4.

  29. Wang L, Shi L, Alam MJ, Geng Y, Li L. Specific and rapid detection of foodborne Salmonella by loop-mediated isothermal amplification method. Food Res Int. 2008;41:69–74.

    Article  Google Scholar 

  30. Li X, Zhang S, Zhang H, Zhang L, Tao H, Yu J, et al. A loop-mediated isothermal amplification method targets the phoP gene for the detection of Salmonella in food samples. Int J Food Microbiol. 2009;133:252–8.

  31. Yang Q, Chen S, Ge B. Detecting Salmonella serovars in shell eggs by loop-mediated isothermal amplification. J Food Prot. 2013;76:1790–6.

    Article  CAS  PubMed  Google Scholar 

  32. Yang Q, Wang F, Jones KL, Meng J, Prinyawiwatkul W, Ge B. Evaluation of loop-mediated isothermal amplification for the rapid, reliable, and robust detection of Salmonella in produce. Food Microbiol. 2015;46:485–93.

    Article  CAS  PubMed  Google Scholar 

  33. Nagai M, Yoshida A, Sato N. Additive effects of bovine serum albumin, dithiothreitol, and glycerol on PCR. Biochem Mol Biol Int. 1998;44:157–63.

    CAS  PubMed  Google Scholar 

  34. Spiess AN, Mueller N, Ivell R. Trehalose is a potent PCR enhancer: lowering of DNA melting temperature and thermal stabilization of taq polymerase by the disaccharide trehalose. Clin Chem. 2004;50:1256–9.

    Article  CAS  PubMed  Google Scholar 

  35. Koonjul PK, Brandt WF, Farrant JM, Lindsey GG. Inclusion of polyvinylpyrrolidone in the polymerase chain reaction reverses the inhibitory effects of polyphenolic contamination of RNA. Nucleic Acids Res. 1999;27:915–6.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  36. Henegariu O, Heerema NA, Dlouhy SR, Vance GH, Vogt PH. Multiplex PCR: critical parameters and step-by-step protocol. Biotechniques. 1997;23:504–11.

    CAS  PubMed  Google Scholar 

  37. Bonardi S, Alpigiani I, Bacci C, Brindani F, Pongolini S. Comparison of an isothermal amplification and bioluminescence detection of DNA method and ISO 6579:2002 for the detection of Salmonella enterica serovars in retail meat samples. J Food Prot. 2013;76:657–61.

    Article  PubMed  Google Scholar 

  38. Loff M, Mare L, de Kwaadsteniet M, Khan W. 3M Molecular detection system versus MALDI-TOF mass spectrometry and molecular techniques for the identification of Escherichia coli O157:H7, Salmonella spp. & Listeria spp. J Microbiol Methods. 2014;101:33–43.

    Article  CAS  PubMed  Google Scholar 

  39. Wang F, Jiang L, Ge B. Loop-mediated isothermal amplification assays for detecting Shiga toxin-producing Escherichia coli in ground beef and human stools. J Clin Microbiol. 2012;50:91–7.

    Article  PubMed  PubMed Central  Google Scholar 

  40. Wang F, Jiang L, Yang Q, Prinyawiwatkul W, Ge B. Rapid and specific detection of Escherichia coli Serogroups O26, O45, O103, O111, O121, O145, and O157 in ground beef, beef trim, and produce by loop-mediated isothermal amplification. Appl Environ Microbiol. 2012;78:2727-36.

  41. Lestari SI, Han F, Wang F, Ge B. Prevalence and antimicrobial resistance of Salmonella serovars in conventional and organic chickens from Louisiana retail stores. J Food Prot. 2009;72:1165–72.

    PubMed  Google Scholar 

Download references

Acknowledgements

We thank Thomas Hammack and Narjol Gonzalez-Escalona from the U.S. Food and Drug Administration, Center for Food Safety and Applied Nutrition (FDA, CFSAN) and National Institute of Allergy and Infectious Diseases/Biodefense and Emerging Infections Research Resources Repository (BEI Resources) for providing some of the Salmonella strains.

The views expressed in this manuscript are those of the authors and do not necessarily reflect the official policy of the Department of Health and Human Services, the U.S. Food and Drug Administration, or the U.S. Government. Reference to any commercial materials, equipment, or process does not in any way constitute approval, endorsement, or recommendation by the Food and Drug Administration.

Funding

This study was supported by internal funding from the U.S. Food and Drug Administration, Center for Veterinary Medicine, Office of Research.

Availability of data and materials

The datasets supporting the conclusions of this article are included within the article. Raw data may be forwarded to interested parties upon request.

Authors’ contributions

QY, FW, and BG conceived of the study and participated in its design; QY carried out the LAMP-BART, conventional LAMP, and 3M MDA Salmonella assays, conducted data analysis, and drafted the manuscript; KJD assisted with assay optimization, feed sample testing, and manuscript preparation; FW helped with manuscript preparation; BG coordinated the study and finalized the manuscript. All authors have read and approved the final manuscript.

Competing interests

The authors declare that they have no competing interests.

Consent for publication

Not applicable.

Ethics approval and consent to participate

Not applicable.

Author information

Authors and Affiliations

  1. Division of Animal and Food Microbiology, Office of Research, Center for Veterinary Medicine, U.S. Food and Drug Administration, Laurel, MD, 20708, USA

    Qianru Yang, Kelly J Domesle, Fei Wang & Beilei Ge

  2. Department of Food Science, Louisiana State University Agricultural Center, Baton Rouge, LA, 70803, USA

    Qianru Yang

  3. Department of Nutrition and Food Science, University of Maryland, College Park, MD, 20742, USA

    Fei Wang

Authors
  1. Qianru Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Kelly J Domesle
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Fei Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Beilei Ge
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Beilei Ge.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yang, Q., Domesle, K.J., Wang, F. et al. Rapid detection of Salmonella in food and feed by coupling loop-mediated isothermal amplification with bioluminescent assay in real-time. BMC Microbiol 16, 112 (2016). https://0-doi-org.brum.beds.ac.uk/10.1186/s12866-016-0730-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s12866-016-0730-7

Keywords

BMC Microbiology

ISSN: 1471-2180

Contact us