- Research
- Open access
- Published:
Genome reduction boosts heterologous gene expression in Pseudomonas putida
Microbial Cell Factories volume 14, Article number: 23 (2015)
Abstract
Background
The implementation of novel platform organisms to be used as microbial cell factories in industrial applications is currently the subject of intense research. Ongoing efforts include the adoption of Pseudomonas putida KT2440 variants with a reduced genome as the functional chassis for biotechnological purposes. In these strains, dispensable functions removed include flagellar motility (1.1% of the genome) and a number of open reading frames expected to improve genotypic and phenotypic stability of the cells upon deletion (3.2% of the genome).
Results
In this study, two previously constructed multiple-deletion P. putida strains were systematically evaluated as microbial cell factories for heterologous protein production and compared to the parental bacterium (strain KT2440) with regards to several industrially-relevant physiological traits. Energetic parameters were quantified at different controlled growth rates in continuous cultivations and both strains had a higher adenosine triphosphate content, increased adenylate energy charges, and diminished maintenance demands than the wild-type strain. Under all the conditions tested the mutants also grew faster, had enhanced biomass yields and showed higher viability, and displayed increased plasmid stability than the parental strain. In addition to small-scale shaken-flask cultivations, the performance of the genome-streamlined strains was evaluated in larger scale bioreactor batch cultivations taking a step towards industrial growth conditions. When the production of the green fluorescent protein (used as a model heterologous protein) was assessed in these cultures, the mutants reached a recombinant protein yield with respect to biomass up to 40% higher than that of P. putida KT2440.
Conclusions
The two streamlined-genome derivatives of P. putida KT2440 outcompeted the parental strain in every industrially-relevant trait assessed, particularly under the working conditions of a bioreactor. Our results demonstrate that these genome-streamlined bacteria are not only robust microbial cell factories on their own, but also a promising foundation for further biotechnological applications.
Background
Much of contemporary metabolic engineering approaches, both at the laboratory scale and in industrial setups, mostly rely on the use of a few bacterial hosts as working platforms [1,2]. However, the organisms that are easiest to manipulate are often neither suitable nor entirely appropriate for specific large-scale and industrial applications. Several physiological and metabolic traits are desired in a robust production host [3-5]. In the first place, the platform cells must be hefty and able to endure a suite of environmental and process-related stresses [6]. Whenever possible, the cells should also exhibit decreased (and traceable) genetic drift, physically robust envelops, efficient and as-simple-as-possible transcription and translation controls, and predictable metabolic behavior [4]. Furthermore, the concept of a suitable host for biotechnological applications is reminiscent of that of a minimal microbial cell, in which all the elements deemed unnecessary for cellular functions other than replication and self-maintenance (e.g., prophages, flagellar genes, and cell-to-cell communication devices) have been eliminated. In spite of the evident need for a bacterial chassis reuniting all these desirable traits, only few hosts (typically Escherichia coli strains [7-11]) have been considered appropriate as biocatalysts in industrial endeavors, such as the production of functional recombinant proteins.
Building on the concepts outlined above, we advocate the choice of Pseudomonas putida strains as microbial platforms pre-endowed with metabolic and stress-endurance traits that are optimal for biotechnological needs [12]. In particular, the non-pathogenic P. putida strain KT2440 shows a remarkable metabolic diversity, amenability to genetic manipulation, and stress endurance, along with the welcome GRAS (generally regarded as safe) status [13-16]. Sequencing of the 6,181,863-bp long genome of P. putida KT2440 brought forth a significant advance in the potential applications of this bacterium [17,18]. In an effort to enable the analysis of strain KT2440 from a systems biology perspective and to foster the development of its biotechnological applications, multiple tools for genome editing have been devised and implemented [19-22]. These tools have facilitated the design of a number of streamlined-genome (SG) variants derived from the wild-type strain. For instance, the construction and physiological characterization of a flagella-less variant of P. putida KT2440 (P. putida EM329) with some emergent properties, such an elevated NADPH/NADP+ redox ratio, was recently reported by Martínez-García et al. [23]. The physiological effects of freeing the bacterium of all the viral DNA encoded in its extant chromosome (represented by not less than four prophages) were likewise explored [24]. While such genetic manipulations conferred interesting biotechnological properties to the bacterial chassis, the industrial worth of a reduced genome P. putida strain has not been systematically explored hitherto. As a matter of fact, the rational engineering of cell factories tailored for optimized protein synthesis and process performance has traditionally focused on protein related issues (such as optimized codon usage, expression systems, folding characteristics, etc.), together with biochemical engineering aspects (i.e., bioreactor setup and control), while the basic properties of the biocatalyst proper are generally left to its default physiological values. However, expanding this scope by focusing on platform engineering opens the door to optimized strains offering low energy demands as a prerequisite for further improvements in production yield.
In this study, we have assessed the use of two heavily re-factored P. putida strains as potential hosts for protein production in a bioreactor setup. One of them lacks flagella, while the other carries multiple mutations implemented to ensure genetic and physiological stability (see Figure 1 and reference [25]). The well-known green fluorescent protein (GFP) from the jellyfish Aequorea victoria was selected as a model protein [26], and kinetic and physiological parameters related to cell performance were analyzed in both batch and continuous cultures. As shown below, the two re-factored versions of P. putida KT2440 outcompeted their parental strain in every parameter tested, showing an extraordinarily improved resistance to stress and enhanced protein production.
Rationale behind the design of reduced-genome derivatives of P . putida KT2440. Strains EM329 and EM383 were constructed using the seamless deletion system described by Martínez-García and de Lorenzo [20]. Note that while strain EM329 only lacks the genes encoding flagellar genes [23], the multiple deletions in strain EM383 were designed to endow the bacterium with the properties of a true microbial platform for a variety of applications. The relative physical location of the genes eliminated in the chromosome of P. putida KT2440 are indicated with slanted arrowheads and the percentage of the genome deleted is shown in each case. The red arrowhead represents the chromosomal location of the flagellar genes (deleted in strain EM329), while the orange arrowheads indicate the genes and gene clusters eliminated in strain EM383.
Results and discussion
Streamlined-genome Pseudomonas putida KT2440 as a chassis for heterologous protein production: design and construction of robust microbial cell factories
In this work, we have evaluated the properties of SG strains derived from P. putida KT2440 (Table 1) under the growth conditions and physiological regimes that prevail in an industrial setting. Figure 1 summarizes the genomic manipulations in each strain and the localization of the deleted elements in the chromosomal coordinates of P. putida KT2440. While the fundamental phenotypic changes brought about by deleting these genomic segments have been recently reported [23,25], this study deals with the question if the emergent properties previously detected in such strains can be exploited for improving heterologous protein production in a bioreactor.
Enhanced process parameters and energy profile of streamlined-genome derivatives of Pseudomonas putida KT2440 in continuous cultures
Biomass yield, carbon balances, and maintenance coefficients
The starting point in the characterization of the strains was the setup of continuous cultivations to explore the key kinetic and process parameters at different growth rates (Additional file 1: Figure S1). Yield coefficients, reflecting the efficiency in the conversion of the substrate into cell components, were calculated in glucose-limited continuous cultivations at steady-state conditions for various D values (Figure 2A). The mutant strains showed a higher Y X/S value (statistically significant, P < 0.05) at all growth rates when compared to the wild-type strain. The highest difference (ca. 12%) was observed when comparing strain EM383 with wild-type KT2440 at D = 0.1 h−1. The differences between P. putida EM329 and EM383, on the contrary, were not statistically significant. The carbon emission rates (i.e., evolution of CO2) differed significantly between the strains. Averaging over all the tested D values, strains EM329 and EM383 had 9% and 16% lower CO2 formation, respectively, as compared to P. putida KT2440 (Additional file 1: Figure S2). This result suggests that the carbon substrate saved by-passing the synthesis of some cellular components (e.g., flagella) can be used for macromolecular biosynthesis, accompanied by a low evolution of CO2, an interesting trait for bioprocesses that depend on biomass formation. The next relevant question was whether these differences in biomass yields also correlate with energy maintenance.
Summary of the growth parameters for the different strains under study in glucose-limited chemostat cultures. Shown are (A) the biomass yield coefficient (Y X/S), calculated at three different dilution rates (D), and (B) the maintenance coefficient (m S). The growth parameters were calculated based on three independent biological experiments conducted in triplicate, and the bars represent the mean value of the corresponding parameter ± standard deviations.
The maintenance demand is an intrinsic characteristic of each specific microorganism. As it measures the amount of carbon source (and ATP) needed to maintain minimal functions within the cell other than generation of more biomass (i.e., non-growth processes), the lower the m S value is for a given strain and/or culture condition, the higher the amount of carbon available to be used for ATP generation, NAD(P)H capacity, and also precursor availability. We explored this trait in the SG strains in the aforementioned glucose-limited continuous cultivations (Figure 2B). Maintenance was calculated via the specific rate of glucose uptake at different D values. The linear relationship between q S and the respective growth rate was monitored over the range of D values comprised between 0.1 and 0.6 h−1. As D increased, so did the q S values for each strain. By applying the Pirt's equation, an m S of 0.052 ± 0.002 gglucose gCDW −1 h−1 (corresponding to 0.29 mmolglucose gCDW −1 h−1) was calculated for the wild-type P. putida strain. Note that no by-product formation needs to be taken into account for the strains considered, as P. putida does not produce any excretion metabolite under these conditions [29,30]. In fact, the carbon balances for all three strains showed an excellent closure (within the range 100% ± 2%) just by considering the formation of biomass, evolution of CO2, and the concentration of residual glucose in the culture medium (Additional file 1: Figure S2). The m S values can also be transformed into ATP demands to directly visualize energy expenditures related to maintenance using some stoichiometric considerations. The Entner-Doudoroff pathway in P. putida yields 1 mole of ATP and 1 mole of NADH per mole of glucose consumed. Additionally, the tricarboxylic acid cycle forms 4 NADH and 1 FADH per each acetyl-coenzyme A, which, for the sake of simplicity in the calculations, can be lumped into 5 NADH. In consequence, 1 glucose molecule yields 1 ATP and about 11 NADH. Assuming a P/O ratio of 1.75 [15], 21 ATP per glucose are formed via oxidative phosphorylation. Under these assumptions, the m ATP values (in molATP gCDW −1 h−1) were 1.09 ± 0.06 for P. putida KT2440, and 0.91 ± 0.02 and 0.71 ± 0.05 for strains EM329 and EM383, respectively.
The m S calculated from our experimental data is in the range of the m S values reported by van Duuren et al. [31] for strain KT2440 in a similar chemostat setup. Vallon et al. [32] also found m S values in the range of those reported here when studying a P. putida-based whole-cell biocatalysis process. The authors also pointed out that low m S values seem to be typical for most Pseudomonas species. For the sake of comparison with a well established bacterial host used in industrial applications, the m S calculated for P. putida KT2440 in this study was about 28% lower than that reported by Nanchen et al. [33] for wild-type E. coli MG1655 in a similar glucose-limited continuous culture. Interestingly, the two SG counterparts of P. putida KT2440 had lower m S values than their parental strain. Specifically, strains EM329 and EM383 showed a reduction in their characteristic m S values of 17% and 35%, respectively, when compared to the wild-type strain (P < 0.01). The corresponding Y X/S true values were 0.47 gCDW gglucose −1 for strain KT2440, and 0.49 gCDW gglucose −1 for both EM329 and EM383. While the changes observed between the mutants and the wild-type strain were statistically significant, the difference when comparing the two SG variants was not.
According to the data available in the literature, maintenance coefficients of Gram-negative organisms grown in a defined glucose-containing medium vary from ca. 0.05 to 0.5 gglucose gCDW −1 h−1 [34-37]. From this point of view, the calculated maintenance demands of P. putida and its SG derivatives lie within the lower end of the cited range of known m S values. The emerging picture is that the deletion of cellular components and structures that spend energy (e.g., flagella assembly and motility) resulted in a reduction in maintenance demands in P. putida, rendering the SG strains appealing as production hosts.
Energy status
During industrial production conditions, bacterial cells are constantly challenged with increased energy demands. The energetic capacity of the cells can be estimated via several physiological parameters, such as [i] the ATP/ADP ratio, [ii] the amount of ATP and the amount of total phosphorylated forms of adenine available per unit of biomass (Y ATP/X and Y AXP/X, respectively), and [iii] the adenylate energy charge (AEC). The AEC gives a deeper insight into the energy state of the cells than the ATP/ADP ratio does, because it considers the relative contribution of all three phosphorylated forms of adenine. The energy capacity of the strains under study was explored in glucose-limited continuous cultivations at different D values (Figure 3). At all the D values tested, strain EM383 consistently revealed statistically significant higher ATP contents and AECs compared to both EM329 and KT2440 (P < 0.01) (Figure 3A and C). The total amount of the three possible phosphorylated forms of adenine was also high in the mutants, and particularly in strain EM383 at D = 0.6 h−1 (Figure 3B). Notably, under fast growth conditions, the difference in the ATP availability between strain EM383 with respect to both EM329 and KT2440 was more than doubled (Figure 3A). At the highest D, the AEC value dropped in all the strains, yet P. putida EM383 managed to keep a higher level of intracellular ATP even under these fast growth conditions, in contrast to the other two strains. These results are consistent with the decreased maintenances in the SG strains explained above, both at the level of substrate consumption and ATP availability.
Characterization of energy parameters for the different strains under study in glucose-limited chemostat cultures. Shown are (A) the yield of ATP on biomass (Y ATP/X), (B) the yield of total nucleosides phosphates on biomass (Y AXP/X), and (C) the adenylate energy charge (AEC) of the cells at three different dilution rates (D). The availability of phosphorylated adenine forms inside the cell and the AEC calculations are based on three independent biological experiments conducted in triplicate, and the bars represent the mean value of the corresponding parameter ± standard deviations.
Taken together, the results obtained in the glucose-limited continuous cultivations above suggested that both P. putida EM329 and EM383 have a number of physiological advantages over the wild-type KT2440 strain that could be potentially exploited for industrial purposes – such as expressing proteins encoded by heterologous DNA sequences. The systematic evaluation of these physiological traits on the background of heterologous protein production is explained in the next sections by adopting a model system that mimics industrial conditions.
Evaluation of the streamlined-genome strains EM329 and EM383 as hosts for heterologous protein synthesis in batch cultures
Shaken-flask cultivation was selected as the first step in the characterization of the strains as microbial cell factories. Growth and physiological parameters as well as recombinant protein production were evaluated for each strain as explained below.
Growth parameters and kinetics of GFP accumulation
GFP was selected as the model protein to study heterologous protein synthesis in the different strains used in this study. A standardized version of gfp, derived from plasmid pSEVA637 [22], was cloned into a vector in which the gene transcription is under control of an IPTG-inducible expression system (i.e., a LacIQ/P trc element). The resulting plasmid, termed pS234G (Figure 4A), was introduced in P. putida KT2440 and its SG derivatives, and their behavior was evaluated in shaken-flask cultures. The impact of introducing plasmid pS234G in these strains depended on the bacterial host, as both mutants had a lower reduction in their μmax values than the wild-type did (Table 2). In strain KT2440, introduction of the gfp-expressing plasmid lowered μmax in ca. 26% when compared to the plasmid-less counterpart. In the SG derivatives, this reduction never surpassed half that value (ca. 12%), demonstrating that the metabolic burden caused by plasmid maintenance and heterologous protein production had a low impact in strains EM329 and EM383. Both strains attained not only higher cell densities at the end of the 24-h cultivation period than KT2440, but they also grew faster irrespective of the plasmid they were transformed with. For instance, P. putida EM383/pS234G showed an 1.6-fold increase in μmax with respect to KT2440/pS234G, and it also reached an 1.7-fold higher final CDW concentration.
Flow cytometry analysis of the green fluorescent protein accumulation in the strains under study. (A) Schematic representation of plasmid pS234G, carrying gfp under the transcriptional control of the IPTG-inducible P trc promoter. The activity of P trc is controlled by the transcriptional regulator LacIQ. The transcriptional terminators included in the plasmid backbone are depicted as T0 and T1. The elements in this outline are not drawn to scale. P. putida KT2440 (B), EM329 (C), and EM383 (D) carrying pS234G were grown on M12 minimal medium containing glucose and harvested in mid-exponential phase. Gray and green peaks represent non-induced and induced cells, respectively. The vertical dashed line indicates the background fluorescence of the corresponding strain carrying the empty pSEVA234 plasmid, used as a negative control. The results shown are from a representative experiment, and the fold change in fluorescence upon induction is indicated in each case. A.F.U., arbitrary fluorescence units.
Another evident difference was that GFP had a better induction profile in strains EM329 and EM383 than in wild-type KT2440 (Figure 4). In fact, the difference between the induced versus the non-induced state in the mutants was twice as much as that observed in the parental P. putida strain (Figure 4B). The compactness of the Gaussian curves in flow cytometry experiments of both EM329 (Figure 4C) and EM383 (Figure 4D) also reflects a more homogenous induction of individual cells than in the wild-type strain, for which the curve in the cell counts versus GFP fluorescence plot was wider. When the trajectory of GFP formation was followed in batch cultures along the time, relevant differences were also observed (Table 2). Recombinant protein production is assumed to be proportional to growth. Accordingly, GFP accumulated faster in the SG strains (e.g., in P. putida EM383, πmax was 1.4-fold higher than in strain KT2440). For the calculation of GFP yield per biomass unit, the cell density of the culture was correlated to the emitted GFP fluorescence. A linear regression during the exponential growth phase resulted in a correlation factor of GFP fluorescence per unit of CDW, which allowed calculating the yield of recombinant protein (Y GFP/X). When biomass formation was taken into account to calculate the corresponding Y GFP/X values, EM329 and EM383 also outcompeted P. putida KT2440 in 20% and 39%, respectively.
Enhanced cell viability of the streamlined-genome strains expressing gfp
The slight decrease in μmax and in the final cell density of the recombinant strains expressing gfp (Table 2) suggested that the metabolic burden imposed by protein accumulation could affect final yields and the overall process performance. On this background, we wondered whether cell viability could be affected as well [38], and we resorted to the PI exclusion test to explore this possibility (Additional file 1: Figure S3). While P. putida KT2440 showed a decrease in cell viability in the presence of pS234G as compared to the same strain with an empty plasmid, neither EM329 nor EM383 showed differences in the PI staining profile. Moreover, the percentage of PI-stained cells was lower for both SG strains than for the parental host, irrespective of the plasmid they carried. Among the strains tested, P. putida EM383 showed the highest cell viability. Notably, when the strains bearing plasmids were compared with their plasmid-free counterparts, no decrease in cell viability was observed in strains EM329 and EM383 (data not shown). When the same comparison was established for KT2440, a significant increase (ca. 25%) of the PI-positive population was detected in the strains carrying plasmid DNA as compared to the plasmid-free host, a figure in agreement with the results of Table 2. These results suggest that the SG P. putida strains have not only a high ability of carrying and replicating heterologous plasmid DNA (see below), but also that they tolerate the metabolic burden commonly associated with plasmid replication better than wild-type P. putida KT2440.
Plasmid stability
All the recombinant cells were able to maintain the recombinant plasmid after 24 h of cultivation, with no significant differences among the three strains. However, when the percentage of plasmid-bearing cells was estimated after 48 h of cultivation, a significant difference in the segregational stability of pS234G could be observed. While P. putida KT2440 and EM329 cells retained the plasmid up to 81% ± 1% and 85% ± 4% of the total bacterial population, strain EM383 had a percentage of recombinants that reached 100% ± 2% (P < 0.05, when compared to the other two strains). In other words, strain EM383 did not show any significant plasmid loss after prolonged cultivation, reflecting a higher stability of extra-chromosomal DNA. This phenomenon is consistent with the absence of some recombinogenic features in this strain (e.g., Tn7 and Tn4652 transposases) that are known to bring forth genetic instability [39,40]. Deletion of these elements results in significant genome and plasmid stabilization, which in turns is beneficial in industrial processes with long fermentation runs [38,41].
Kinetics of GFP formation in bioreactor batch cultures: influence of controlled aeration and carbon source on growth and profile of protein synthesis
By judging the process parameters measured in shaken-flask cultures, the viability profile of the recombinants under these conditions, and the genetic stability of the cells, we concluded that the SG strains were advantageous bacterial hosts for protein synthesis in comparison with wild-type KT2440. Building on this hypothesis, we further evaluated their capabilities as microbial cell factories in the well-controlled environment of a bioreactor under conditions compatible with industrial production.
Growth parameters
The derivative SG strains reached statistically significant higher μmax values than the wild-type KT2440 strain in all the cultivations performed (Figure 5). When grown on glucose as the sole carbon source, EM329 showed a 7% and EM383 a 10% increase in μmax (Figure 5A, P < 0.05). When using citrate as the carbon source, EM329 showed 4% and EM383 showed 11% faster growth (Figure 5B, P < 0.05). Mutant EM383 also reached statistically significant higher μmax compared to strain EM329. Besides, both EM329 and EM383 attained higher final CDW concentrations when grown on glucose as the sole carbon source (9% and 13%, respectively when compared to P. putida KT2440; P < 0.05) (Additional file 1: Figure S4), mirroring the results already observed in shaken-flask cultures (Table 2). This difference was not observed on citrate, as all the strains reached a similar final biomass density (Additional file 1: Figure S5). In all, these results show the importance of adequate aeration and mixing within the bioreactor. In the first place, all the strains attained higher μmax values and final cell densities in bioreactor cultivations as compared to the same traits in shaken-flask cultures. On the other hand, as both P. putida EM329 and EM383 are devoid of the flagellar machinery that would enable the cells to explore different microenvironments within the bioreactor, they tend to sediment and, if not properly stirred, the cells will likely become limited in O2 transfer, as previously hinted by Martínez-García et al. [23]. The same stirring speed and air bubbling applied to the bioreactor to grow P. putida KT2440 enabled a much better growth profile of the SG strains.
Growth parameters and protein production kinetics for the strains under study in batch bioreactor cultures. Shown are the specific growth rate (μmax) for cells grown on (A) glucose and (B) citrate, as well as the effect of plasmid maintenance and heterologous protein production under these growth conditions. The accumulation of the green fluorescent protein (GFP) in cultures of the strains carrying pS234G was assessed during exponential growth on M12 minimal medium containing either glucose or citrate through (C) the maximum specific rate of GFP formation (πmax) and (D) the yield of GFP on biomass (Y GFP/X). The growth parameters and protein production kinetics were calculated based on three independent biological experiments conducted in triplicate, and the bars represent the mean value of the corresponding parameter ± standard deviations.
In a subsequent step, the influence of GFP production on the growth of the SG strains was investigated. As a further control, the wild-type strain was also transformed with the empty vector pSEVA234. Introduction of the empty vector in KT2440 did not result in a significant decrease in growth (1.5% in average), as it was also quantified in shaken-flask cultures (Table 2). On the basis of these results, the influence of the control vector on the physiology of the cells was deemed negligible. Expression of gfp from plasmid pS234G, on the contrary, caused an average 6% decrease in the μmax value for the wild-type strain. On the other hand, expression of gfp in the SG strains did not lead to any significant decrease of μmax. The general trend of an increase in μmax for the derivative strains previously observed in all the growth conditions analyzed could also be observed under recombinant protein expression conditions, particularly when using citrate as the sole carbon source. In fact, when growing on citrate, P. putida EM329/pS234G and EM383/pS234G reached significantly higher growth rates (ca. 32% for both strains) than P. putida KT2440/pS234G (Figure 5A and B, P < 0.05). No significant differences, however, were observed within the two derivative strains, as they grew very similarly and attained very comparable final cell densities.
Recombinant protein expression
During exponential growth of the cells, the trajectory of fluorescence increase due to GFP accumulation was found to be exponential as well (Additional file 1: Figure S4 and S5). Under these production conditions, the πmax values were higher in the reduced genome strains as compared to the wild-type, in an almost carbon source-independent fashion (Figure 5C). The highest differences were detected using citrate as the carbon source; under these conditions, P. putida EM329/pS234G and EM383/pS234G showed an increase of 43% and 48% in πmax, respectively, when compared to the same parameter in P. putida KT2440/pS234G (P < 0.05). Both derivative strains also had a significantly higher Y GFP/X compared to the wild-type strain (Figure 5D, P < 0.05), and this trend was again more or less independent of the carbon source used. For instance, when growing the cells on glucose, EM329 reached a 18% higher yield than the wild-type strain, whereas EM383 was capable of attaining a 37% higher yield than strain KT2440. On citrate, the differences between the Y GFP/X values for strains EM329 and EM383 were 20% and 41%, respectively, as compared to wild-type KT2440. In the exponential growth phase, the volumetric productivity of GFP was estimated to be 3,470 ± 9 A.F.U. l−1 h−1 for strain EM383/pS234G when growing on citrate, the highest among the strains and growth conditions tested in this study.
Organic acids formation
One important aspect of industrial fermentations is the spillage of by-products that divert carbon (and, most often, also cofactors such as ATP or NADPH) needed for the synthesis of the desired product [42]. As mentioned before, P. putida does not secrete metabolites at a high concentration, as it is the case, for example, of acetate in E. coli fermentations [43]. However, when glucose is used as the carbon source, part of the substrate is usually oxidized by P. putida to gluconate in the cell periplasm by the activity of a glucose dehydrogenase [30]. Gluconate can leak out of the cell into the culture medium and is re-used as substrate as growth proceeds. When the accumulation of gluconate in the culture medium was evaluated in the bioreactor cultures, a sharp peak for P. putida KT2440 was observed in mid-exponential growth phase, reaching 18.5 ± 3.1 mM (i.e., ca. 3.5 g l−1). In contrast, both SG derivatives produced less gluconate, its concentration reaching 10.2 ± 1.4 and 9.3 ± 1.5 mM, respectively. These figures are comparable to those obtained when gluconate formation was evaluated in cultures of the strains carrying plasmid pS234G (data not shown). The kinetics of gluconate accumulation was very similar among all the strains, and this metabolite altogether disappeared from the culture supernatants in the late exponential phase as it was likely used by the cells as substrate. As a consequence of this significant reduction in the oxidation of glucose in the mutants, it is likely that more carbon is readily available for catabolism, in agreement with the high Y X/S values and CDW concentrations observed in the cultures of both P. putida EM329 and EM383.
Conclusion
Determinants of successful recombinant protein production, such as the rate and duration of production and quality or stability of the product, strongly depend on the physiology of the producer cell [44]. These traits can be typically manipulated by metabolic engineering of the host cell, by genetic engineering of the expression vector, and also by means of process engineering [45,46]. However, the vast majority of metabolic engineering efforts so far have dealt with the manipulation of genetic parts implanted in a bacterial host, optimization of the process parameters, and less so with the microbial chassis itself.
In the case of the environmental bacterium P. putida, the set of genes strictly needed for survival in soil is most likely not the gene complement appropriate for the efficient production of heterologous proteins in an industrial setup. In particular, the deletion of the flagellar operon clearly resulted in a physiological advantage in our experimental setup, in which motility is not a required feature – and it is even a detrimental one, as it consumes large amounts of ATP [47,48]. The elimination of flagella in P. putida KT2440 not only causes a surplus of ATP but also of NADPH [23] that can be potentially funneled into heterologous pathways. Moreover, elimination of the proviral DNA in strain KT2440 makes cells more resistant to DNA insults [24], such as UV radiation, along with a moderate improvement of ATP and NAD(P)H levels [25]. We thus anticipate that there is an additive physiological effect of the two types of deletions along with an increase of resistance to DNA damage. Further benefits can be brought forth by the removal of the other genomic DNA segments of P. putida that were erased in strain EM383. The separate contribution of every deletion was not addressed, as it is possible that the breakdown is not identical for each heterologous gene or pathway that can be expressed in the SG strains. In this work, we have instead focused on the positive effect of merging all deletions for the sake of designing a bacterial chassis useful for the industrial production of heterologous proteins.
Genome reduction of the wild-type E. coli strain MG1655 by Blattner and collaborators resulted in advantages (mostly in terms of genetic stability) for hosting and expressing heterologous genes [49-52]. While significant reductions of the E. coli MG1655 genome size have been achieved thus far [10], these strains retain the genomic and biochemical frame of a typical enterobacterium. This is a significant issue for expression of recombinant genes or pathways that cause stress or demand a high ATP and/or NAD(P)H availability to achieve full functionality [53,54], as it is the case with the P. putida variants examined in this article. In this context, the results presented above showed that the two SG derivatives of P. putida KT2440 outcompeted the parental strain in every biotechnologically-relevant parameter assessed among all the culture conditions tested, particularly in a bioreactor setup.
As shown above, P. putida EM329 and EM383 are not only sound microbial cell factories on their own, but they also provide a solid foundation for further targeted manipulations of their genomes. These forthcoming operations will not only result in enhanced bacterial chassis tailored for industrial protein synthesis, but they will also shed light on the relevant question about what is the minimal set of genes needed to maintain cell functioning, fitness, and robustness. Moreover, the combination of these genomic surgery strategies along with the optimization of industrial cultivation parameters (e.g., by analyzing protein production in fed-batch cultures) will certainly result in significant improvements of the overall process performance in a variety of biotechnological applications.
Methods
Bacterial strains, culture media, and general procedures
Bacterial strains and plasmids used in this study are listed in Table 1. E. coli and Pseudomonas strains were routinely grown at 37°C and 30°C, respectively, in rich LB medium [55] under oxic conditions (i.e., in Erlenmeyer flasks containing medium up to one-tenth of their nominal volume with agitation at 170 r.p.m.). E. coli DH5α was used for routine cloning procedures and plasmid maintenance. The physiological characterization of P. putida recombinants was carried out both in shaken-flask and bioreactor cultures using M12 minimal medium, which contained 2.2 g l−1 (NH4)2SO4, 0.4 g l−1 MgSO4 · 7 H2O, 0.04 g l−1 CaCl2 · 2H2O, 0.02 g l−1 NaCl, 2 g l−1 KH2PO4, added with trace elements (2 mg l−1 ZnSO4 · 7H2O, 1 mg l−1 MnCl2 · 4H2O, 15 mg l−1 Na3citrate · 2H2O, 1 mg l−1 CuSO4 · 5H2O, 0.02 mg l−1 NiCl2 · 6H2O, 0.03 mg l−1 Na2MoO4 · 2H2O, 0.3 mg l−1 H3BO3, and 10 mg l−1 FeSO4 · 7H2O). All cultivations were started using cells from a single colony in an LB medium plate, growth and harvested from exponential phase cultures in LB medium, and stored as a working cryo-culture bank at −70°C as a 20% (v/v) glycerol stock. Glucose or citrate were used as representative glycolytic or gluconeogenic carbon sources, respectively, throughout this study. The concentration of each carbon source in pre-cultures was 4 g l−1, while in batch cultivations (both in shaken-flasks and bioreactors) it was increased up to 10 g l−1. All solid media used in this work contained 15 g l−1 agar, and, whenever needed, kanamycin was added at 50 μg ml−1 as a filter-sterilized solution for plasmid maintenance. Isopropyl-β-D-thiogalactopyranoside (IPTG) was added at 1 mM to induce the expression of genes under the control of LacIQ/P trc . Growth was estimated in an Ultrospec 3000 pro UV/Visible spectrophotometer (GE Healthcare Bio-Sciences Corp., Piscataway, NJ, USA) by measuring the optical density at 600 nm (OD600) after diluting the culture as necessary with 9 g l−1 NaCl. In bioreactor cultivations, the cell dry weight (CDW) was measured in culture aliquots as appropriate for further mass-based calculations. CDW was determined in 10-ml culture samples by transferring the broth into previously-weighed glass tubes. The suspension was centrifuged at 7,000 r.p.m. and 4°C for 10 min and washed twice with 5 ml of cold saline. The pellet fraction was finally dried at 85°C until constant weight (ca. 48 h). The yield of biomass on substrate (Y X/S, in gCDW gglucose −1) was derived from the CDW assessed in the samples and the glucose consumption rates (see below).
Bioreactor cultures
All bioreactor cultures were carried out in an in-situ sterilizable bench-top 3.7 liter fermentor (Bioengineering AG, Wald, Switzerland). Exhaust gas composition (CO2 and O2), dissolved O2 concentration, and pH in the liquid phase were monitored on line using BCP-CO2 and BCP-O2 analyzers (BlueSens GmbH, Herten, Germany) and O2 and pH probes (Mettler Toledo GmbH, Giessen, Germany). The measurement of CO2 in the exhaust gas was used to calculate CO2 emission rates. The dissolved O2 concentration was monitored to assure non-limiting oxic conditions. In all cultivations, the dissolved O2 level was kept higher than pO2 = 70% (pO2 = 100% is defined as the dissolved O2 level in the bioreactor under operating conditions, but without biomass in suspension). A pre-culture was prepared for each run by inoculating cells from a working cryo-culture bank (8.5 ml) in 150 ml of M12 minimal medium contained in a 1.5-liter baffled Erlenmeyer flask. Cells were cultivated as explained above until the culture reached OD600 = 1.5 and used as the inoculum as explained below.
Batch cultivation
Bioreactor batch cultivations were inoculated aseptically with a mid-exponential, shaken-flask pre-culture to reach a final working volume of 1.5 liters. Previous to inoculating the bioreactor, the operating conditions were set to 30°C, a stirrer speed of 700 r.p.m., an over-pressure in the vessel of 0.5 bar, and an aeration of 2 l min−1 of filtered-sterilized ambient air. The pH was set and maintained at pH = 7.0 by automatic addition of 25% (v/v) NH4OH.
Continuous cultivation
In the case of glucose-limited continuous cultivations, the batch cultivation was switched into chemostat operation when glucose was completely depleted. The dilution rate (D) was increased stepwise from D = 0.1 h−1 to 0.3 h−1, and finally to 0.6 h−1. Each D value, determined by feeding medium at a pre-defined flow rate, was maintained for 5 residence times under steady-state conditions before further increasing the growth rate. The weight gain of the bioreactor was constantly monitored, and a harvest pump was started whenever the weight gain exceeded 10 g. Additionally, D values were manually checked by weighing the mass of the harvest outflow within a time-span of 1 h before sampling.
Nucleic acid manipulation, plasmid construction, and plasmid stability assay
DNA manipulations followed well established protocols [55]. Plasmid pS234G carries the green fluorescent protein gene under transcriptional control of the IPTG-inducible P trc promoter. This expression vector was constructed as follows. Plasmid pSEVA637 was digested with HindIII and SpeI, and the ca. 0.7-kb DNA fragment, spanning gfp preceded by a synthetic ribosome binding site, was ligated into pSEVA234 restricted with the same enzymes. The ligation mixture was transformed in E. coli DH5α, and positive clones were identified in LB medium plates containing kanamycin. Plasmid DNA was recovered from single clones and checked by automated sequencing. Plasmids were transferred into P. putida KT2440 and its derivatives by electroporation [56].
Plasmid segregational stability in cells grown in shaken-flask cultures was estimated as described by Nikel and de Lorenzo [57]. Briefly, cultures were serially diluted in 10-fold steps in LB medium containing no antibiotics. The dilution level was estimated based on OD600 measurements of the samples, and 50 μl of the final dilution was plated onto LB medium plates with and without kanamycin. Colony forming units (CFUs) were counted after 24 h of growth at 30°C in biological triplicates. The segregational stability of pSEVA234 and pS234G was calculated by comparing CFUs in plates with and without kanamycin.
Analytical procedures
GFP quantification
Determination of GFP fluorescence by flow cytometry
Cells sampled from shaken-flask cultures at the time points indicated in the text were immediately diluted with phosphate-buffered saline to an OD600 of ca. 0.35 and fixed with 0.4% (v/v) formaldehyde. Flow cytometric analysis of GFP fluorescence levels was performed in a Gallios™ flow cytometer (Beckman Coulter Inc., Indianapolis, IN, USA) equipped with an argon ion laser of 15 mW at 488 nm as the excitation source. Size-related forward scatter signals gathered by the cytometer were analyzed using the Cyflogic™ 1.2.1 software (CyFlo Ltd., Turku, Finland) to gate fluorescence data only from bacteria in the stream. The green fluorescence emission was detected using a 530/30-nm band pass filter set. Data for >15,000 cells per experiment were collected, and the Cyflogic™ 1.2.1 software was used to calculate the geometric mean of fluorescence per bacterial cell (x-mean) in each sample.
Determination of GFP fluorescence by spectrofluorimetry
Fluorescence in samples from bioreactor cultures was determined by taking 200-μl technical triplicates of the cell suspension and the corresponding filtrates into a 96-well microtiter plate. The fluorescence was quantified after 60 min (allowing GFP to mature) at 485 nm (excitation) and 535 nm (emission) in a fluorescence microplate analyzer (Synergy 2, BioTek Instruments, Inc., Winooski, VT, USA). The yield of GFP on biomass [Y GFP/X, in arbitrary fluorescence units (A.F.U.) gCDW −1] was derived from these measurements.
Kinetics of GFP accumulation in bioreactor cultures
The trajectory of GFP increase was analyzed throughout the growth curve in batch cultures. A factor, termed πmax, was implemented to describe the increase of GFP over time. This factor is analogous to μ, the specific growth rate, which describes the increase of biomass over time during exponential growth. The corresponding equation is:
where C P is the GFP fluorescence (in A.F.U.), C P 0 is the GFP fluorescence at t = 0 h (in A.F.U.), πmax is the maximum specific rate of GFP formation (in h−1), and t is time (in h).
Cell viability
We resorted to the propidium iodide (PI, a strong DNA intercalating agent) test, based on dye exclusion, to estimate the cell viability in samples from shaken-flask cultures. Cells having intact, polarized membranes are able to interact with and to exclude charged molecules like PI, while dead or seriously damaged bacteria become stained with the dye [58]. Flow cytometry analysis was performed to evaluate the percentage of PI-stained cells as a measure of cell viability. Measurements were performed in a Gallios™ flow cytometer (Beckman Coulter Inc.), using the argon ion laser at 488 nm as the excitation source. The characteristic PI fluorescence emission at 617 nm was detected using a 620/30-nm band pass filter array. PI (Life Technologies Corp., Grand Island, NY, USA) was used from a freshly-prepared stock solution at 0.5 mg ml−1 in water and added to a final concentration of 1.5 μg ml−1 to the cell suspension. Cells were stained for 30 min in the dark, and measured thereafter.
Quantification of glucose and organic acids
The concentration of residual glucose and citrate in the supernatants was quantified using commercial kits according to the manufacturer's instructions (R-Biopharm AG, Darmstadt, Germany). The evolution of gluconate was also followed using a similar procedure, using a kit from Megazyme International Ireland (Bray, Ireland). In either case, control mock assays were conducted by spiking M12 minimal medium with different amounts of the carbon source under examination.
Determination of ATP/ADP ratios, ATP yields, and the adenylate energy charge
Biocatalytic reactions in the cells were stopped by promptly mixing the samples with 35% (w/v) HClO4. A 4-ml sample was taken with a fast sampling probe directly into 1 ml of pre-cooled (−20°C) HClO4 solution on ice and mixed immediately. The sample was shaken at 4°C for 15 min in an overhead rotation shaker. Afterwards, the solution was neutralized on ice by fast addition of 1 ml of 1 M K2HPO4 and 0.9 ml of 5 M KOH. The neutralized solution was centrifuged at 4°C and 22,000 r.p.m. for 10 min to remove cell debris, and precipitated proteins and KClO4. The supernatant was kept at −20°C for batch high pressure liquid chromatography (HPLC) measurements. At each sampling time, a broth sample containing cells and a filtrated sample without cells was treated according to this procedure. Nucleotide analysis was performed by reversed-phase ion-pair HPLC. The HPLC system (Agilent Technologies GmbH, Waldbronn, Germany) consisted of an Agilent 1200 series auto-sampler, binary pump, thermostated column compartment, and a diode array detector set at 260 and 340 nm. The nucleotides were separated and quantified on a reversed-phase C18 column combined with a security guard column (Supelcosil LC-18-T, 25 cm × 4.6 mm, 3 μm particle size, equipped with 2-cm Supelguard LC-18-T replacement cartridges; Supelco Inc., Bellefonte, USA) at a constant flow rate of 1 ml min−1. The mobile phases were [i] buffer A [0.1 M KH2PO4/K2HPO4, with 4 mM tetrabutylammonium sulfate and 0.5% (v/v) CH3OH, pH = 6.0] and [ii] solvent B [70% (v/v) buffer A and 30% (v/v) CH3OH, pH = 7.2]. The following gradient program was implemented to separate the nucleotides in the samples: 100% buffer A from 0 min to 3.5 min, increase to 100% solvent B until 43.5 min, remaining at 100% solvent B until 51 min, decrease to 100% buffer A until 56 min, and remaining at 100% buffer A until 66 min.
The adenylate energy charge (AEC) is a quantitative measure of the relative saturation of high-energy phospho-anhydride bonds available in the adenylate pool of the cell [34,59], and can be expressed according to the formula:
The AEC values were derived from the experimental measurements of each adenine nucleotide in the samples. The amount of ATP available per unit of biomass (Y ATP/X, in μmol ATP gCDW −1) was also calculated.
Calculation of maintenance demands
Growth-decoupled maintenance demands on glucose (m S, in gglucose gCDW −1 h−1) were calculated by following the Pirt's equation [60]:
where q S is the specific rate of glucose consumption (in gglucose gCDW −1 h−1), μ is the specific growth rate (in h−1), and Y X/S true is the true yield of biomass on glucose (in gCDW gglucose −1).
A linear regression was used to calculate m S values through a weighted least-squares regression. This method allows to take into account the variance of each data point individually, instead of assuming a constant variance. Weighted least-squares regression minimizes the error estimate (s) according to the following equation:
where ωi is the i-th weight, and y i and ŷ i are the measured data points and the data points derived from regression, respectively. The weights determine how much each value influences the final parameter estimate [61]. Therefore, the fit is less influenced by data points of higher variance (σi 2) than sampling points with lower variance. The weights are calculated using the following equation:
Statistical analysis
The reported experiments were independently repeated at least twice (as indicated in the text), and, unless indicated otherwise, the mean value of the corresponding parameter ± standard deviation is presented. All continuous cultivations were carried out in independent biological triplicates, and each sample was additionally taken in technical triplicates. Differences in results were evaluated via a two-tailed Student's t-test defining a P-value < 0.05 as significant.
References
Danchin A. Scaling up synthetic biology: do not forget the chassis. FEBS Lett. 2012;586:2129–37.
Singh V. Recent advancements in synthetic biology: current status and challenges. Gene. 2014;535:1–11.
Almquist J, Cvijovic M, Hatzimanikatis V, Nielsen J, Jirstrand M. Kinetic models in industrial biotechnology - Improving cell factory performance. Metab Eng. 2014;24:38–60.
Foley PL, Shuler ML. Considerations for the design and construction of a synthetic platform cell for biotechnological applications. Biotechnol Bioeng. 2010;105:26–36.
Sauer M, Mattanovich D. Construction of microbial cell factories for industrial bioprocesses. J Chem Technol Biotechnol. 2012;87:445–50.
Hoffmann F, Rinas U. Stress induced by recombinant protein production in Escherichia coli. Adv Biochem Eng Biotechnol. 2004;89:73–92.
Chen X, Zhou L, Tian K, Kumar A, Singh S, Prior BA, et al. Metabolic engineering of Escherichia coli: a sustainable industrial platform for bio-based chemical production. Biotechnol Adv. 2013;31:1200–23.
Gopal GJ, Kumar A. Strategies for the production of recombinant protein in Escherichia coli. Protein J. 2013;32:419–25.
Jana S, Deb JK. Strategies for efficient production of heterologous proteins in Escherichia coli. Appl Microbiol Biotechnol. 2005;67:289–98.
Mizoguchi H, Mori H, Fujio T. Escherichia coli minimum genome factory. Biotechnol Appl Biochem. 2007;46:157–67.
Ruiz JA, de Almeida A, Godoy MS, Mezzina MP, Bidart GN, Méndez BS, et al. Escherichia coli redox mutants as microbial cell factories for the synthesis of reduced biochemicals. Comput Struct Biotechnol J. 2013;3:e201210019.
Nikel PI, Martínez-García E, de Lorenzo V. Biotechnological domestication of pseudomonads using synthetic biology. Nat Rev Microbiol. 2014;12:368–79.
Kim J, Park W. Oxidative stress response in Pseudomonas putida. Appl Microbiol Biotechnol. 2014;98:6933–46.
Nikel PI. A brief guide to Pseudomonas putida as a microbial cell factory. BioEssays 2012, Available on line at http://goo.gl/DXF1y.
Nogales J, Palsson BØ, Thiele I. A genome-scale metabolic reconstruction of Pseudomonas putida KT2440: iJN746 as a cell factory. BMC Syst Biol. 2008;2:79.
Poblete-Castro I, Becker J, Dohnt K, Martins dos Santos VAP, Wittmann C. Industrial biotechnology of Pseudomonas putida and related species. Appl Microbiol Biotechnol. 2012;93:2279–90.
Nelson KE, Weinel C, Paulsen IT, Dodson RJ, Hilbert H, Martins dos Santos VAP, et al. Complete genome sequence and comparative analysis of the metabolically versatile Pseudomonas putida KT2440. Environ Microbiol. 2002;4:799–808.
Weinel C, Nelson KE, Tümmler B. Global features of the Pseudomonas putida KT2440 genome sequence. Environ Microbiol. 2002;4:809–18.
Martínez-García E, Calles B, Arévalo-Rodríguez M, de Lorenzo V. pBAM1: an all-synthetic genetic tool for analysis and construction of complex bacterial phenotypes. BMC Microbiol. 2011;11:38.
Martínez-García E, de Lorenzo V. Engineering multiple genomic deletions in Gram-negative bacteria: analysis of the multi-resistant antibiotic profile of Pseudomonas putida KT2440. Environ Microbiol. 2011;13:2702–16.
Martínez-García E, de Lorenzo V. Transposon-based and plasmid-based genetic tools for editing genomes of Gram-negative bacteria. Methods Mol Biol. 2012;813:267–83.
Silva-Rocha R, Martínez-García E, Calles B, Chavarría M, Arce-Rodríguez A, de las Heras A, et al. The Standard European Vector Architecture (SEVA): a coherent platform for the analysis and deployment of complex prokaryotic phenotypes. Nucleic Acids Res. 2013;41:D666–75.
Martínez-García E, Nikel PI, Chavarría M, de Lorenzo V. The metabolic cost of flagellar motion in Pseudomonas putida KT2440. Environ Microbiol. 2014;16:291–303.
Martínez-García E, Jatsenko T, Kivisaar M, de Lorenzo V. Freeing Pseudomonas putida KT2440 of its proviral load strengthens endurance to environmental stresses. Environ Microbiol. 2015;17:76–90.
Martínez-García E, Nikel PI, Aparicio T, de Lorenzo V. Pseudomonas 2.0: genetic upgrading of P. putida KT2440 as an enhanced host for heterologous gene expression. Microb Cell Fact. 2014;13:159.
Vizcaino-Caston I, Wyre C, Overton TW. Fluorescent proteins in microbial biotechnology - new proteins and new applications. Biotechnol Lett. 2012;34:175–86.
Hanahan D, Meselson M. Plasmid screening at high colony density. Methods Enzymol. 1983;100:333–42.
Bagdasarian M, Lurz R, Rückert B, Franklin FCH, Bagdasarian MM, Frey J, et al. Specific purpose plasmid cloning vectors. II. Broad host range, high copy number, RSF1010-derived vectors, and a host-vector system for gene cloning in Pseudomonas. Gene. 1981;16:237–47.
Chavarría M, Nikel PI, Pérez-Pantoja D, de Lorenzo V. The Entner-Doudoroff pathway empowers Pseudomonas putida KT2440 with a high tolerance to oxidative stress. Environ Microbiol. 2013;15:1772–85.
del Castillo T, Ramos JL, Rodríguez-Herva JJ, Fuhrer T, Sauer U, Duque E. Convergent peripheral pathways catalyze initial glucose catabolism in Pseudomonas putida: genomic and flux analysis. J Bacteriol. 2007;189:5142–52.
van Duuren JB, Puchałka J, Mars AE, Bücker R, Eggink G, Wittmann C, et al. Reconciling in vivo and in silico key biological parameters of Pseudomonas putida KT2440 during growth on glucose under carbon-limited condition. BMC Biotechnol. 2013;13:93.
Vallon T, Glemser M, Malca SH, Scheps D, Schmid J, Siemann-Herzberg M, et al. Production of 1-octanol from n-octane by Pseudomonas putida KT2440. Chem Ing Tech. 2013;85:841–8.
Nanchen A, Schicker A, Sauer U. Nonlinear dependency of intracellular fluxes on growth rate in miniaturized continuous cultures of Escherichia coli. Appl Environ Microbiol. 2006;72:1164–72.
Atkinson DE, Walton GM. Adenosine triphosphate conservation in metabolic regulation - Rat liver citrate cleavage enzyme. J Biol Chem. 1967;242:3239–41.
Kooijman SA, Muller EB, Stouthamer AH. Microbial growth dynamics on the basis of individual budgets. Antonie van Leeuwenhoek. 1991;60:159–74.
Russell JB. The energy spilling reactions of bacteria and other organisms. J Mol Microbiol Biotechnol. 2007;13:1–11.
Schulze KL, Lipe RS. Relationship between substrate concentration, growth rate, and respiration rate of Escherichia coli in continuous culture. Arch Microbiol. 1964;48:1–20.
Díaz-Ricci JC, Hernández ME. Plasmid effects on Escherichia coli metabolism. Crit Rev Biotechnol. 2000;20:79–108.
Horak R, Kivisaar M. Expression of the transposase gene tnpA of Tn4652 is positively affected by integration host factor. J Bacteriol. 1998;180:2822–9.
Schneider D, Lenski RE. Dynamics of insertion sequence elements during experimental evolution of bacteria. Res Microbiol. 2004;155:319–27.
Soriano E, Borth N, Katinger H, Mattanovich D. Flow cytometric analysis of metabolic stress effects due to recombinant plasmids and proteins in Escherichia coli production strains. Metab Eng. 1999;1:270–4.
Silva F, Queiroz JA, Domingues FC. Evaluating metabolic stress and plasmid stability in plasmid DNA production by Escherichia coli. Biotechnol Adv. 2012;30:691–708.
Wong MS, Wu S, Causey TB, Bennett GN, San KY. Reduction of acetate accumulation in Escherichia coli cultures for increased recombinant protein production. Metab Eng. 2008;10:97–108.
de Marco A. Recombinant polypeptide production in E. coli: towards a rational approach to improve the yields of functional proteins. Microb Cell Fact. 2013;12:101.
Rosano GL, Ceccarelli EA. Recombinant protein expression in Escherichia coli: advances and challenges. Front Microbiol. 2014;5:172.
Waegeman H, Soetaert W. Increasing recombinant protein production in Escherichia coli through metabolic and genetic engineering. J Ind Microbiol Biotechnol. 2011;38:1891–910.
Chevance FF, Hughes KT. Coordinating assembly of a bacterial macromolecular machine. Nat Rev Microbiol. 2008;6:455–65.
Kazmierczak BI, Hendrixson DR. Spatial and numerical regulation of flagellar biosynthesis in polarly flagellated bacteria. Mol Microbiol. 2013;88:655–63.
Csörgõ B, Fehér T, Tímár E, Blattner FR, Pósfai G. Low-mutation-rate, reduced-genome Escherichia coli: an improved host for faithful maintenance of engineered genetic constructs. Microb Cell Fact. 2012;11:11.
Pósfai G, Plunkett G, Fehér T, Frisch D, Keil GM, Umenhoffer K, et al. Emergent properties of reduced-genome Escherichia coli. Science. 2006;312:1044–6.
Sharma SS, Blattner FR, Harcum SW. Recombinant protein production in an Escherichia coli reduced genome strain. Metab Eng. 2007;9:133–41.
Umenhoffer K, Fehér T, Balikó G, Ayaydin F, Pósfai J, Blattner FR, et al. Reduced evolvability of Escherichia coli MDS42, an IS-less cellular chassis for molecular and synthetic biology applications. Microb Cell Fact. 2010;9:38.
Na D, Kim TY, Lee SY. Construction and optimization of synthetic pathways in metabolic engineering. Curr Opin Microbiol. 2010;13:363–70.
Nicolaou SA, Gaida SM, Papoutsakis ET. A comparative view of metabolite and substrate stress and tolerance in microbial bioprocessing: From biofuels and chemicals, to biocatalysis and bioremediation. Metab Eng. 2010;12:307–31.
Sambrook J, Russell DW. Molecular cloning: a laboratory manual. Cold Spring Harbor Laboratory: Cold Spring Harbor; 2001.
Choi KH, Kumar A, Schweizer HP. A 10-min method for preparation of highly electrocompetent Pseudomonas aeruginosa cells: application for DNA fragment transfer between chromosomes and plasmid transformation. J Microbiol Methods. 2006;64:391–7.
Nikel PI, de Lorenzo V. Robustness of Pseudomonas putida KT2440 as a host for ethanol biosynthesis. New Biotechnol. 2014;31:562–71.
Nikel PI, de Lorenzo V. Engineering an anaerobic metabolic regime in Pseudomonas putida KT2440 for the anoxic biodegradation of 1,3-dichloroprop-1-ene. Metab Eng. 2013;15:98–112.
Chapman AG, Fall L, Atkinson DE. Adenylate energy charge in Escherichia coli during growth and starvation. J Bacteriol. 1971;108:1072–86.
Pirt SJ. The maintenance energy of bacteria in growing cultures. Proc R Soc Lond B Biol Sci. 1965;163:224–31.
Fuller WA. Measurement error models. New York: Wiley; 2006.
Acknowledgements
The authors are indebted to E. Martínez-García (Madrid) and M. Siemann-Herzberg (Stuttgart) for sharing materials and for enlightening discussions. This study was supported by the ST-FLOW, Pseudomonas 2.0 (0315932B) and ARISYS Contracts of the EU, the BIO Program of the Spanish Ministry of Economy and Competitiveness, and the PROMT Project of the CAM. PIN holds a Marie Skłodowska-Curie Actions Program grant from the EU (ALLEGRO, UE-FP7-PEOPLE-2011-IIF-300508).
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
SL designed the study, carried out the bioreactor scale experiments, and drafted the manuscript. PIN designed the study, carried out the shaken-flask scale physiological experiments and the flow cytometry analysis, and drafted the manuscript. VDL and RT conceived the whole study, coordinated the work, and wrote the manuscript. All authors read and approved the final manuscript.
Sarah Lieder and Pablo I Nikel contributed equally to this work.
Additional file
Additional file 1: Figure S1.
Physiological characterization of (A) P. putida KT2440, (B) P. putida EM329, and (C) P. putida EM383 in glucose-limited chemostat cultures at different dilution rates (D). Figure S2. Carbon balance of glucose-limited chemostat cultures of P. putida KT2440, P. putida EM329, and P. putida EM383. Figure S3. Propidium iodide (PI) exclusion to estimate cell viability in P. putida KT2440, P. putida EM329, and P. putida EM383 with the empty and the recombinant plasmid. Figure S4. Physiological characterization in bioreactor batch cultivations of the different strains carrying plasmids. Figure S5. Physiological characterization in bioreactor batch cultivations of the different strains carrying plasmids.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
The Creative Commons Public Domain Dedication waiver (https://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Lieder, S., Nikel, P.I., de Lorenzo, V. et al. Genome reduction boosts heterologous gene expression in Pseudomonas putida . Microb Cell Fact 14, 23 (2015). https://0-doi-org.brum.beds.ac.uk/10.1186/s12934-015-0207-7
Received:
Accepted:
Published:
DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s12934-015-0207-7