Skip to main content

A rapid model for developing dry surface biofilms of Staphylococcus aureus and Pseudomonas aeruginosa for in vitro disinfectant efficacy testing

Abstract

Background

Bacterial biofilms persistent on dry environmental surfaces in healthcare facilities play an important role in the occurrence of healthcare associated infections (HAI). Compared to wet surface biofilms and planktonic bacteria, dry surface biofilms (DSB) are more tolerant to disinfection. However, there is no official method for developing DSB for in vitro disinfectant efficacy testing. The objectives of this study were to (i) develop an in vitro model of DSB of S. aureus and P. aeruginosa for disinfectant efficacy testing and (ii) investigate the effect of drying times and temperatures on DSB development. We hypothesized that a minimum six log10 density of DSB could be achieved on glass coupons by desiccating wet surface biofilms near room temperatures. We also hypothesized that a DSB produced by the model in this study will be encased in extracellular polymeric substances (EPS).

Methods

S. aureus ATCC-6538 and P. aeruginosa ATCC-15442 wet surface biofilms were grown on glass coupons following EPA MLB SOP MB-19. A DSB model was developed by drying coupons in an incubator and viable bacteria were recovered following a modified version of EPA MLB SOP MB-20. Scanning electron microscopy was used to confirm the EPS presence on DSB.

Results

Overall, a minimum of six mean log10 densities of DSB for disinfectant efficacy were recovered per coupon after drying at different temperatures and drying times. Regardless of strain, temperature and dry time, 86% of coupons with DSB were confirmed to have EPS.

Conclusion

A rapid model for developing DSB with characteristic EPS was developed for disinfectant efficacy testing against DSB.

Background

Healthcare Associated Infections (HAIs) are a major cause of morbidity and mortality in the United States [1, 2]. HAIs were estimated to cause about 721,800 infections in acute care hospitals in 2011, and approximately 75,000 deaths each year [3]. On average, one out of 31 hospital patients in the US contracts at least one HAI daily [4]. Although it is estimated that 30–35% of HAIs can be prevented [5], the occurrence of HAIs is still one of the leading causes of death in the US [6].

Staphylococcus aureus and Pseudomonas aeruginosa are some of the most common causes of HAIs [7, 8]. These pathogens can grow in the environment as biofilms [9, 10]. They attach to inert surfaces and can be encased by extracellular polymeric substances (EPS) [9, 11, 12]. Biofilms on high touch surfaces are a known contributor to HAI infections [13]; they are estimated to account for 65 and 80% of microbial and chronic infections, respectively [14].

Environmental surfaces (e.g., food trolleys, hospital commodes, bed rails) [15] and mobile patient care equipment such as blood pressure cuffs [16] and intravenous poles [17] support the formation of biofilms by providing a platform for the attachment of planktonic bacterial cells [9, 18, 19]. On any surface, biofilms are generally not evenly distributed [20] and knowledge of the factors that influence the production of EPS by bacteria as S. aureus under low shear conditions is limited [21]. Once formed, biofilms are capable of growing on dry surfaces in healthcare facilities for protracted periods, surviving for as long as one year [22, 23]. The definition of a DSB is controversial [24, 25] as there is no clear definition or test method to differentiate varying degrees of dehydrated or dry biofilms. Dry surface biofilms (DSB) have been reported to persistently grow on contaminated environmental surfaces in healthcare facilities and can therefore play an important role in HAIs [24]. Although dehydrated, DSB can still be characterized by the presence of EPS [20, 26]. At maturity, bacterial cells in P. aeruginosa [27] and S. aureus [28] wet surface biofilms become motile, allowing for easy dispersal and re-attachment on other surfaces [9, 13, 18]. More recently, a 2018 study by Chowdhury et al. demonstrated that DSB of S. aureus can be dispersed to other surfaces even though they are dehydrated [24]. However, the dispersal rates for DSB are relatively lower compared to the dispersal of planktonic bacterial cells [24]. The use of antimicrobials to disinfect contaminated surfaces in healthcare facilities plays an important role in preventing HAIs [13, 29, 30]. Studies have shown that wet surface bacterial biofilms can be more tolerant to disinfectants than planktonic cells [31,32,33]. In an extensive review by Otter et al., mature wet surface biofilms were estimated to be on average 1000 times less susceptible to disinfectants than planktonic bacteria [34]. The tolerance to antimicrobial disinfectants has been principally associated with EPS, which can shield underlying cells from direct contact with antimicrobials [35, 36]. Compared to wet surface biofilms, dry surface bacterial biofilms can be more tolerant to disinfection procedures [26, 37]. However, while there is an official method for testing the bactericidal efficacy of disinfectants against wet surface biofilms [38], a comparable method for developing DSB for disinfectant efficacy testing in vitro has not been extensively developed. There are very limited studies that have developed a rapid in vitro DBS biofilm model and there is no clear standard for how many days or the conditions for a wet surface biofilm to dehydrate and become a DSB. Previous DSB development models include a dehydration step [20]. Following ASTM E-2197 [39], a two-hour drying time has been used to dehydrate wet surface biofilms for disinfectant efficacy testing [45]. A previously developed model required 12 days of repeated hydration and dehydration of bacterial cells to develop DSB [20]. The objective of this study was to develop an in vitro model of S. aureus and P. aeruginosa DSB for disinfectant efficacy testing. In this study, we investigated the effect of different drying times and temperatures on the development of DSB of S. aureus and P. aeruginosa. We hypothesized that we would achieve a minimum six log10 bacterial density on DSB per test coupon for disinfectant efficacy testing by subjecting wet surface biofilms to desiccation at near room temperatures. We also hypothesized that DSB of S. aureus and P. aeruginosa produced by the model in this study will be encased in EPS similar to those of wet surface biofilms to mimic associated disinfection challenges.

Methods

Bacteria strains used in this study

S. aureus ATTC-6538 and P. aeruginosa ATCC-15442 biofilms were developed on borosilicate glass coupons (1.27 ± 0.01 cm; Biosurface Tech, Inc.). These are standard strains for EPA disinfectant efficacy testing on wet surface biofilms and for disinfectant registration for use in healthcare facilities [40].

Development of DSB

Wet surface biofilms were established on coupons for 48 h following EPA MLB SOP MB-19-for growing biofilms using a CDC biofilm reactor [38]. Wet surface biofilms were grown in two phases (batch and continuous) as defined in the aforementioned protocol. For the batch phase, one mL of S. aureus or P. aeruginosa overnight culture were transferred into 500 mL tryptic soy broth (TSB; Becton, Dickinson and Company, Sparks, MD) batch culture medium (three TSB/L for S. aureus and 300 mg TSB/L for P. aeruginosa) in a CDC biofilm reactor (Biosurfaces Technologies, Inc., Bozeman, MT). The CDC biofilm reactor was mounted on a magnetic hot plate stirrer (Talbays, Thorofare, NJ) to initiate the growth of biofilms for 24 ± 2 h. The hot plate stirrer was set at a rotational speed of 60 ± 5 rpm at 36 ± 1 °C for S. aureus. The rotational speed and hot plate stirrer temperature for P. aeruginosa was 125 ± 5 rpm and 21 ± 2 °C, respectively, following EPA MLB SOP MB-19. The Continuous Stir Tank Reactor (CSTR) phase immediately followed the batch phase and involved a continuous flow of CSTR medium for 24 ± 2 h. A total of 500 mL or 50 mL of CSTR medium was added to 20 L of sterile distilled water in a carboy for S. aureus or P. aeruginosa respectively. This resulted in a final growth medium concentration of 1 g/L TSB for S. aureus and 100 mg/L TSB for P. aeruginosa. The 20 L CSTR growth medium in the carboys were preheated to 36 ± 1 °C S. aureus and maintained at 21 °C for P. aeruginosa before continuously pumping the medium through the CDC biofilm reactor for 24 ± 2 h. The CSTR growth medium was pumped (Cole-Palmer, Barrington, IL) at a rate of 30 ± 2 min residence time for S. aureus and P. aeruginosa.

Polypropylene rods holding coupons were rinsed in 25 ml phosphate buffered saline (PBS) for 30 s to remove planktonic bacteria cells following EPA MLB SOP MB-20 [40] before drying. Coupons with wet surface biofilms of S. aureus and P. aeruginosa were continuously dried in a standard laboratory incubator to develop DSB while still contained to the rod. The dry times for both S. aureus and P. aeruginosa coupons were 24 h, 48 h, 72 h, 96 h, and 120 h. Bacteria recovery from DSB was done within 120 h as the CDC recommends routine disinfection of healthcare surfaces at least daily or every other day (approximately 48 h) [41]. Drying temperatures were 25 °C and 30 °C for S. aureus to mimic near and elevated room temperatures and 16 °C and 21 °C as guided by preliminary studies conducted by our research group to establish dry surface P. aeruginosa biofilms. Incubators were disinfected with 70% ethanol prior to drying coupons. Incubator doors were also kept closed during drying.

Recovery of viable S. aureus and P. aeruginosa cells from DSB

Bacterial cells from DSB were recovered following a modified version of EPA MLB SOP MB-20 for testing the efficacy of disinfectants against bacterial biofilms [40]. At every dry temperature (25 °C and 30 °C for S. aureus; 16 °C and 21 °C for P. aeruginosa) and at each dry time (24–120 h), three coupons with DSB (technical replicates; N = 15 coupons per dry temperature and bacterial strain) were harvested from the rods in the incubator and transferred into three 50 mL sterile conical tubes (Corning Science, Mexico). Coupons were harvested successively at 24 h, 48 h, 72 h, 96 h and 120 h and processed to establish mean log10 bacterial densities per coupon. Three control coupons with wet surface biofilms were also processed to detect viable bacteria from biofilms before dehydration. A control coupon was also harvested before drying, at each dry time, and at each drying temperature for scanning electron microscopy (SEM) imaging.

Viable bacterial cells were recovered from coupons in 50 mL sterile conical tubes with four mL of PBS. After one min, 36 mL of neutralizing buffer (1 L H2O + 5.2 g Difco neutralizing buffer; Becton, Dickinson and Company Sparks, MD) was added. Bacterial biofilms were released from coupons into solution through alternate cycles of vortexing and sonication [40]. The contents of the 50 mL tubes were vigorously vortexed through three one-minute cycles alternated with sonication at 45 Khz (ultra-sonic water bath; Cole-Parmer Instrument Company, Chicago, IL). All coupons were subjected to four sonication cycles (one min, one min, one min, and two min) lasting a total of five min. Viable bacteria cells of S. aureus and P. aeruginosa from coupons were quantified after serial dilution with PBS, and ten mL aliquots vacuum-filtered onto sterile filter membranes (0.2 μm pore; Pall Corporation, Port Washington, NY) and incubated following EPA MLB SOP MB-20.Five biological replicates were conducted for each dry temperature. Each batch of three control coupons with wet surface biofilms and 15 technical replicates with DSB (N = 18 coupons) made up one biological replicate.

Scanning Electron microscopy

Coupons for SEM imaging were stored in an aldehyde fixative (2.5% glutaraldehyde + 0.1 M cacodylate buffer, Electron Microscopy Sciences; Hatfield, PA) at 4 °C before sample preparation for imaging. Bacteria cells on control coupons (wet surface biofilms) and DSB coupons were fixed for SEM imaging to confirm the presence of S. aureus and P. aeruginosa extracellular matrices typical of bacterial biofilms. Harvested coupons were placed in 24 well plates (Corning Science, Mexico) and fixed for SEM imaging following the step-wise sample fixation procedure used by the Life Sciences Core facility at Purdue University and as described by Murtey and Ramasamy [42] with modifications. Following glutaraldehyde fixation, each coupon was rinsed three times with one mL of distilled water. After, the third rinse, each coupon was fixed with one mL of 1% osmium tetroxide for a contact time of 30 min per coupon. Osmium tetroxide was removed and each coupon rinsed three times with one mL distilled water. Each sample was progressively fixed 50% ethanol, 75% ethanol, 95% ethanol and 100% ethanol, with each individual alcohol treatment lasting 10 min. Upon removal of the 100% ethanol, a 10 min 1:1 treatment with 100% ethanol and hexamethyldisilazane (HMDS) was used to transition coupons to a final fixation step with pure HMDS. The final fixation phase was completed with two HMDS treatments lasting 10 min each. Following fixation, air-dried samples were mounted on an SEM pin using carbon tape adhesive discs. Each pin-mounted sample was sputter coated for 60 s with platinum using a Cressington 208 HR sputter coater (Cressington Scientific Instruments, Watford England) set at 40 mA. Platinum sputter coated coupons were imaged using a FEI Nova Nano 200 SEM (Hillsboro, Oregon). The Everhart/Thornley Detector (ETD) were used for imaging and the Nova 200 SEM was set at a 5kv accelerating voltage, and a spot size of three. SEM imaging was done on three locations, approximately 12,740 μm2/coupon.

Statistical analysis

Mean bacterial log10 densities were calculated based on CFU counts from control and DSB coupons. Average bacterial log10 densities for each dry time and temperature were compared for significant statistical differences using the least squares method of Proc Glm to fit linear models (n = 70; α = 0.05). The interaction between each dry time and temperature were also analyzed using the same procedure. Significant differences between group means of bacterial log10 densities per dry time and temperature were compared pair-wise using Tukey adjustments SAS version 9.4 (SAS Institute, Cary, NC) for all statistical analysis. Multiple logistic regression analysis was used to determine the relationship between the EPS presence and mean log10 densities per coupon.

Results

S. aureus DSB sufficient for disinfectant efficacy testing were established after drying at 25 °C and 30 °C

For the purpose of this study, we defined DSB as “hydrated” bacterial biofilms that remained viable despite prolonged dehydration (24 h – 120 h) under low nutrient availability and were confirmed by SEM imaging to be encased by EPS. For both drying temperatures (25 °C or 30 °C), the overall S. aureus mean log10 density per coupon ranged from 6.64 ± 0.08 (coefficient of variation; CoV =1.20%) after 24 h of drying to 6.01 ± 0.38 (CoV = 6.32%) at a dry time of 120 h. Specifically, mean log10 densities of 6.69 ± 0.45 (CoV = 6.73%) and 6.58 ± 0.60 (CoV = 9.12%) S. aureus DSB were recovered per coupon after drying for 24 h at 25 °C and 30 °C, respectively. Statistically, the bacterial mean log10 densities per coupon after 24 h of drying were not significantly higher than those achieved after 48 h and 72 h dry times at 25 °C or 30 °C (Fig. 1a and b) (P ≥ 0.05). However, mean log10 densities after 24 h of drying were significantly higher than those achieved after 96 h and 120 h of drying (P < 0.05). Overall, there were no significant differences in the average log10 densities of DSB per coupon between different dry times (48 h, 72 h, 96 h, and 120 h) or temperatures (25 °C and 30 °C) in our method. (P ≥ 0.05).

Fig. 1
figure 1

Panel a Mean log10 densities of S. aureus ATTC-6538 dry surface biofilms developed at 25 °C for 24–120 h Panel b Mean log10 densities of S. aureus ATTC-6538 dry surface biofilms developed at 30 °C for 24–120 h Panel c Mean log10 densities of P. aeruginosa ATTC- 15442 dry surface biofilms established at 16 °C for 24–120 h Panel d Mean log10 densities of P. aeruginosa ATTC-15442 dry surface biofilms established at 21 °C for 24–120 h. Bars with the same letter or pairs of Tukey letters within each panel are not statistically different

Compared to control coupons with wet surface biofilms that had an average mean log10 density of 7.85 ± 0.08 per coupon, and regardless of the dry time and temperature, mean log10 densities of dry surface S. aureus biofilms per coupon were significantly lower (Fig. 1a and b) (P < 0.05). On average, the exposure of wet surface biofilms to dehydration resulted in a 1.56 ± 0.30 log10 reduction per coupon.

Higher log10 densities of DSB of P. aeruginosa were recovered at 16 °C compared to 21 °C

On average, statistically higher log10 densities of P. aeruginosa DSB were achieved after drying at 16 °C compared to 21 °C (P < 0.05; Fig. 1c and d). Mean log10 densities of DSB varied from 8.49 ± 0.55 (CoV = 6.48%) per coupon after drying at 24 h to 7.78 ± 0.72 (CoV = 9.25%) at 120 h when dried at 16 °C. However, when dried at 21 °C, the average P. aeruginosa log10 DSB density per coupon reduced to 7.37 ± 0.78 (CoV = 10.58%) at a dry time of 24 h and 6.30 ± 0.94 (CoV = 14.92%) after 120 h.

There were also statistically significant differences among dry surface P. aeruginosa biofilm mean log10 densities achieved after drying at 16 °C and 25 °C for 24 h, 48 h, 72 h, 96 h and 120 h, as well as for log10 densities achieved from wet surface biofilms on control coupons (P ≥ 0.05; Fig. 1c). When the dry temperature was set at 21 °C, no statistically higher mean log10 densities of DSB per coupon were achieved after 24 h of drying compared to 48 h, 72 h, 96 h and 120 h (P < 0.05; Fig. 1d).

EPS were visible in S. aureus and P. aeruginosa DSB

S. aureus DSB were evaluated for EPS as previously described by Ahmatroudi et al. [20] and Ledwoch et al. [15]. The same considerations were used for P. aeruginosa. For the purpose of this study, coupons with EPS were those that showed cocci of S. aureus or rod-shaped P. aeruginosa encased partially or completely within a matrix as viewed with SEM. Overall, 84% of coupons (42/50) with DSB of S. aureus had detectable EPS. Specifically, 92% (23/25) and 76% (19/25) of all coupons with S. aureus DSB developed at 25 °C and 30 °C, respectively, had visible EPS through SEM imaging (Figs. 2 and 3). DSB coupons without the EPS were those with bacterial cells present but without evidence of the encasing or cross-linking matrix typical of S. aureus or P. aeruginosa biofilms. EPS was identified in only 80% (32/40) of coupons harvested between 48 h and 120 h at 25 °C and 30 °C. At 25 °C EPS was identified in 100% (15/15) of S. aureus DSB dried for 24 h, 48 h and 72 h (Figs. 2).

Fig. 2
figure 2

Panel a Scanning electron microscope (SEM) image of wet surface biofilms of S. aureus before drying Panel b dry surface biofilms of S. aureus developed 24 h after drying at 25 °C Panel c dry surface biofilms of S. aureus developed 48 h after drying at 25 °C Panel d dry surface biofilms of S. aureus developed 72 h after drying at 25 °C Panel e dry surface biofilms of S. aureus developed 96 h after drying at 25 °C Panel f dry surface biofilms of S. aureus developed 120 h after drying at 25 °C. Magnification: 10,000X

Fig. 3
figure 3

Panel a Scanning electron microscope (SEM) image of wet surface biofilms of S. aureus before drying at 30 °C Panel b DBS of S. aureus developed 24 h after drying at 30 °C Panel c DBS of S. aureus developed 48 h after drying at 30 °C Panel d DBS of S. aureus developed 72 h after drying at 30 °C Panel e DBS of S. aureus developed 96 h after drying at 30 °C Panel f DSB of S. aureus developed 120 h after drying at 25 °C. Magnification: 10,000X

EPS was also present in P. aeruginosa DSB (Figs. 4 and 5). On average, 76% (19/25) of all coupons dried at 16 °C had characteristic EPS regardless of the dry time. All samples (25) had EPS when dried at 21 °C. There was a notable increase in EPS on P. aeruginosa DSB coupons with 48–120 h of drying at 16 °C, suggesting an increase in EPS production with prolonged dehydration.

Fig. 4
figure 4

Panel a Scanning electron microscope (SEM) image of wet surface biofilms of P. aeruginosa before drying at 16 °C Panel b DSB of P. aeruginosa 24 h after drying at 16 °C Panel c DSB of P. aeruginosa 48 h after drying at 16 °C Panel d DSB of P. aeruginosa 72 h after drying at 16 °C Panel e DSB of P. aeruginosa 96 h after drying at 16 °C Panel f DSB of P. aeruginosa 120 h after drying at 16 °C. Magnification: 10,000X

Fig. 5
figure 5

Panel a Scanning electron microscope (SEM) image of wet surface biofilms of P. aeruginosa before drying at 21 °C Panel b DSB of P. aeruginosa 24 h after drying at 21 °C Panel c DSB of P. aeruginosa 48 h after drying at 21 °C Panel d DSB of P. aeruginosa 72 h after drying at 21 °C Panel e DSB of P. aeruginosa 96 h after drying at 21 °C Panel f DSB of P. aeruginosa 120 h after drying at 21 °C. Magnification: 10,000X

Discussion

In this study, we developed a rapid in vitro model for establishing DSB of S. aureus and P. aeruginosa. We extensively tested wet surface biofilm dehydration endpoints and determined whether we could make a dehydrated biofilm with consistent counts above the six log10 required by the EPA to support wet surface biofilm disinfection claims on registered products [43]. Specifically, we tested different dry temperatures (25 °C and 30 °C for S. aureus, 16 °C and 21 °C for P. aeruginosa) and dehydration times 24 h, 48 h, 72 h, 96 h and 120 h. We found that overall, there were no statistically significant differences in the mean log10 densities of DSB per coupon when the drying temperature was 25 °C or 30 °C. For P. aeruginosa DSB developed on coupons, we found significant differences in mean log10 densities per coupon between drying temperatures of 16 °C or 21 °C. For S. aureus and P. aeruginosa, the average log10 density of DSB met and exceeded the US Environmental Protection Agency (EPA) minimum standard of six log10 [43] required for wet surface biofilm disinfection claims.

A minimum six log10 density of DSB for disinfectant efficacy testing achieved

While there is currently no standard for testing bactericidal efficacy of disinfectants against DSB [37], we elected to use the EPA’s minimum six log10 standard of wet surface biofilms as our model validation standard. A six log10 density of DSB was achieved for S. aureus and P. aeruginosa. Our findings are similar to those of Almatroudi et al. who established an average log10 density of 7.13 ± 0.04 of partially dehydrated dry surface S. aureus per coupon using a 12-day biofilm development model [20]. Chowdhurry et al. used the same 12-day model proposed by Almatroudi et al. [20] and achieved on average 6.32 ± 0.13 log10 CFU of S. aureus DSB per coupon [44]. The rapid method we developed for S. aureus had similar average log10 densities of DSB per coupon (6.69 ± 0.45 and 6.58 ± 0.60 per coupon) after a 24 h complete desiccation step at 25 °C or 30 °C, respectively. Further desiccation from 48 to 120 h did not result in a significant decline in mean log10 densities of DSB per coupon, suggesting the consistency of our rapid method and the persistence of DSB of S. aureus on environmental surfaces under adverse conditions. In a recent review by Onyango and Alreshidi, the authors reported that Staphylococci could be persistent in nutrient–deficient environments in healthcare settings and contribute significantly in the incidence of HAI [45]. The previously developed 12-day model for growing partially dehydrated DSB of S. aureus included repeated cycles of hydration and dehydration [20]. Our rapid model though somewhat similar, involved only one 48 h hydration cycle and one subsequent dehydration cycle. However, both studies achieved similar average log10 densities of DSB per coupon. Once formed, DSB may stay dehydrated and may only rehydrate when surface disinfection occurs [46]. The CDC recommends daily or three times per week (approximately every 48 h) surface disinfection episodes in healthcare facilities [41]. Considering this standard, the proposed rapid model is promising for testing the efficacy of disinfectants as antimicrobials can be tested in vitro to mimic DSB disinfection every 24 h or 48 h.

We achieved higher mean log10 densities after dehydrating wet surface biofilms of P. aeruginosa for 24 h compared to S. aureus.. However, there were no significant reductions in the mean long10 densities of P. aeruginosa DSB per coupon with prolonged drying from 48 to 120 h. This suggests rapid maturation of P. aeruginosa DSB during early drying stages. Meesilp and Mesil suggested that within a two-hour period, S. aureus and P. aeruginosa inoculated on stainless steel surfaces could develop into mature biofilms [47]. As expected, lower mean log10 densities were achieved on all dried coupons compared to controls. This finding is similar to those of Meesilp and Mesil who suggested that although mature, the average density of biofilms on stainless steel surfaces in vitro reduced after 24 h of growth [47]. While we did not attain mean log10 densities per coupons expected from wet biofilm preparation following standard EPA methods (8.0–9.5 log10 CFU/coupon for P. aeruginosa and 7.5–9.0 log10 CFU/coupon for S. aureus) [38], our rapid method consistently achieved the minimum six log10 biofilm density required for disinfectant efficacy claims against biofilms.

Mean log10 densities for DSB explained by EPS

Overall, we found a significant relationship between the mean log10 density of viable bacteria cells recovered from DSB of S. aureus and P. aeruginosa and the presence of EPS on sampled coupons. Specifically, we found that although relatively lower mean log10 CFU of DSB per coupon were recorded at near room temperatures (25 °C and 21 °C for S. aureus and P. aeruginosa, respectively), more DSB developed at these temperatures after 24 h, 48 h and 72 h of drying were encased within EPS. This possibly explains why it was more difficult to recover higher mean log10 CFU per coupon at these temperatures than at 16 °C and 30 °C. Previous authors reported that the EPS encases underlying bacterial cells, preventing direct contact with solutions such as disinfectants [9, 11, 12]. Similarly, in a study of multi-species DSB on surfaces collected from hospital wards, Ledwoch et al. found that S. aureus and Pseudomonas spp. were among the most prevalent pathogens on the studied surfaces, with SEM imaging confirming the presence of EPS clusters [15]. Almatroudi et al. also demonstrated that partially dehydrated DSB of S. aureus had multi-layered biofilm matrices similar to those on dry sterile supply boxes in a hospital [20]. These previous studies support our suggestion that at room temperature, S. aureus and Pseudomonas spp. biofilms are more likely to be encased within an EPS. Specifically, DSB survive drying through EPS production, and the expression of inherent resistance traits against environmental stress factors [48]. Under stressful conditions as starvation and dehydration, S. aureus and P. aeruginosa quickly recover in media as exposure to one form of stress may induce protection against other stress factors [49]. This has been linked to the bacterial adhesion phase in biofilm formation as adhesion induces the production of stress proteins [50, 51], which protect bacterial biofilms from adverse conditions as nutrient deprivation [52].

With regards to disinfectant efficacy testing against DSB, developing S. aureus and P. aeruginosa biofilms at near room temperatures could provide a more robust and challenging scenario for disinfectant efficacy testing and subsequent product registration with the EPA. Moreover, DSB are more tolerant to disinfection than wet surface biofilms [26, 37]. While our study successfully developed a rapid in vitro model for growing DSB, it is limited in that multi-species biofilms were not studied to better mimic the real-world use of disinfectants. We also recognize that our method involves a continuous fluid flow phase that may not be typical of the way DSB are formed on inanimate surfaces in healthcare facilities. The same could be argued for wet surface biofilms used in disinfection efficacy testing. In addition to the above stated limitations, we acknowledge that our EPS identification is limited to the areas of the coupons investigated by SEM, therefore false negatives are possible.

Conclusion

We found that mean log10 densities of DSB significant for disinfectant efficacy can be developed at near room temperatures. We also found that despite prolonged drying, the bacterial density of DSB per coupon does not significantly reduce over time. Further, DSB developed at near room temperatures are predominantly encased within EPS. It is therefore critical to patient safety for the EPA to establish an efficacy method for testing disinfectants against DSB as recent studies have called into question the validity of using planktonic testing methods to represent a real world environment, where bacteria are generally encased in a biofilm on surfaces [26, 30]. As with new model development efforts, there is more to be learned about the intricacies of the DSB cell state, including stress response mechanisms and level of cross-protection under the conditions used here.

Availability of data and materials

All quantitative data generated or analysed during this study are included in this published article.

Abbreviations

ATCC:

American type Culture collection

CDC:

Center for Disease Control

CFU:

Colony forming unit

EPA:

Environmental Protection Agency

EPS:

Extracellular polymeric substances

HAI:

Healthcare-associated infection

HMDS:

Hexamethyldisilazane

PBS:

Phosphate buffered saline

R2a:

Reasoner’s 2a

SEM:

Scanning electron microscope

TSA:

Tryptic soy agar

TSB:

Tryptic soy broth

ASTM:

American Society for Testing and Materials

References

  1. Center for Disease Control. Overview: healthcare-associated infections. CDC. 2018. https://health.gov/hcq/prevent-hai.asp. Accessed 3 Jan 2019.

  2. Madden GR, Weinstein RA, Sifri CD. Diagnostic stewardship for healthcare-associated infections: opportunities and challenges to safely reduce test use. J Infect Control Hosp Epidemiol. 2018;39:214–8.

    Article  Google Scholar 

  3. Magill SS, Edwards JR, Bamberg W, Beldavs ZG, Dumyati G, et al. Multistate point-prevalence survey of health care–associated infections. N Engl J Med. 2014;370:1198–208.

    Article  CAS  Google Scholar 

  4. Center for Disease Control. Healthcare-associated infection data 2018. CDC. 2018. https://www.cdc.gov/hai/data/index.html. Accessed 3 Aug 2019.

  5. Umscheid CA, Mitchell MD, Doshi JA, Agarwal R, Williams K, Brennan PJ. Estimating the proportion of healthcare-associated infections that are reasonably preventable and the related mortality and cost. Infect Control Hosp Epidemiol. 2011;32:101–14. https://0-doi-org.brum.beds.ac.uk/10.1086/657912.

    Article  PubMed  Google Scholar 

  6. Kahn KL, Battles JB. Taking national action to prevent and eliminate healthcare–associated infections. Med Care. 2014. https://0-doi-org.brum.beds.ac.uk/10.1097/MLR.0000000000000083.

  7. Sievert DM, Ricks P, Edwards JR, et al. National Healthcare Safety Network (NHSN) team and participating NHSN facilities antimicrobial-resistant pathogens associated with healthcare-associated infections: summary of data reported to the National Healthcare Safety Network at the Centers for Disease Control and Prevention 2009–2010. Infect Control Hosp Epidemiol. 2013;34:1–14.

    Article  Google Scholar 

  8. Weiner LM, Webb AK, Limbago B, et al. Antimicrobial-resistant pathogens associated with healthcare-associated infections: summary of data reported to the National Healthcare Safety Network at the Centers for Disease Control and Prevention, 2011–2014. Infect Control Hosp Epidemiol. 2016;37(11):1288–301.

    Article  Google Scholar 

  9. Hermandez-Jimenez E, del Rosa C, Toledano D, et al. Biofilm vs. planktonic bacteria mode of growth: which do human macrophages prefer? Biochem Biophys Res Commun. 2013;441:947–52.

    Article  Google Scholar 

  10. Olson ME, Ceri H, Morck DW, Buret AG, Read RR. Biofilm bacteria: formation and comparative susceptibility to antibiotics. Can J Vet Res. 2002;66:86–92.

    PubMed  PubMed Central  Google Scholar 

  11. Percival S, Cutting K, Thomas J, Williams D. An introduction to the world of microbiology and biofilmology. In: Percival S, Cutting K, editors. Microbiology of wounds. Boca Raton: CRC Press; 2010.

    Chapter  Google Scholar 

  12. Abdallah M, Khelissa O, Ibrahim A, Benoliel C, Heliot L, Dhulster P, Chihib NE. Impact of growth temperature and surface type on the resistance of Pseudomonas aeruginosa and Staphylococcus aureus biofilms to disinfectants. Int J Food Microbiol. 2015;214:38–47.

  13. Macia MD, Rojo-Molinero E, Oliver A. Antimicrobial susceptibility testing in biofilm-growing bacteria. Clin Microbiol Infect. 2014;20:981–90.

    Article  CAS  Google Scholar 

  14. Jamal M, Ahmad W, Andleeb S, Jalil F, Imran M, Nawaz MA, Hussain T, Ali M, Rafiq M, Kamil MA. Bacteria biofilms and associated infections. J Chin Med Assoc. 2017;81:7–11.

    Article  Google Scholar 

  15. Lewoch K, Dancer SJ, Otter JA, Kerr K, et al. Beware biofilm! Dry biofilms containing bacterial pathogens on multiple healthcare surfaces; a multi-center study. J Hosp Infect. 2018;100:47–56. https://0-doi-org.brum.beds.ac.uk/10.1016/j.jhin.2018.06.028.

    Article  Google Scholar 

  16. Gialluly DC, Morange V, Gialluly DE, Loulergue J, et al. Blood pressure cuff as a potential vector of pathogenic microorganisms: a prospective study in a teaching hospital. Infect Control Hosp Epidemiol. 2006;27:940–3.

    Article  Google Scholar 

  17. Obasi C, Allison A, Akinpelu W, Hammons R, et al. Contamination of equipment in emergency settings: an exploratory study with a targeted automated intervention. Ann Surg Innov and Res. 2009;3:8.

    Article  Google Scholar 

  18. Percival SL, Suleman L, Vuotto C, Donelli G. Healthcare-associated infections, medical devices and biofilms: risk, tolerance and control. J Med Microbiol. 2015;64:323–34.

    Article  Google Scholar 

  19. Johani K, Abualsaud D, Costa DM, Hu H, et al. Characterization of microbial community composition, antimicrobial resistance and biofilm on intensive care surfaces. J Infect Pub Health. 2018;11:418–24.

    Article  Google Scholar 

  20. Almatroudi A, Hu H, Deva A, Gosbell I, Jacombs A, et al. A new dry-surface biofilm model: an essential tool for efficacy testing of hospital surface decontamination procedures. J Microbiol Methods. 2015;117:171–6.

    Article  CAS  Google Scholar 

  21. Hou J, Veeregowda DH, Belt-Gritter B, Busscher HJ, Mei CH. Extracellular polymeric matrix production and relaxation under fluid shear and mechanical pressure in Staphylococcus aureus biofilms. Applied and Environ Microbiol. 2018. https://0-doi-org.brum.beds.ac.uk/10.1128/AEM.01516-17.

  22. Hu H, Johani K, Gosbell IB, Jacombs ASW, et al. Intensive care unit environmental surfaces are contaminated by multidrug-resistant bacteria in biofilms: combined results of conventional culture, pyrosequencing, scanning electron microscopy, and confocal laser microscopy. J of Hosp Infect. 2015;91:35–44. https://0-doi-org.brum.beds.ac.uk/10.1016/j.jhin.2015.05.016.

    Article  CAS  Google Scholar 

  23. Mitchell BG, Dancer SJ, Anderson M, Dehn E. Risk of organism acquisition from prior room occupants: a systematic review and meta-analysis. J Hosp Infect. 2015;91:211–7. https://0-doi-org.brum.beds.ac.uk/10.1016/j.jhin.2015.08.005.

    Article  CAS  PubMed  Google Scholar 

  24. Chowdhury D, Tahir S, Legge S, Hu H, Prvan T, et al. Transfer of dry surface biofilm in the healthcare environment: the role of healthcare workers’ hands as vehicles. J Hosp Infect. 2018;100:85–90.

    Article  Google Scholar 

  25. Buckinghan-Meyer K, Goeres DM, Hamilton MA. Comparative evaluation of biofilm disinfectant efficacy tests. J of Microbiol Methods. 2007;70:236–44.

    Article  Google Scholar 

  26. Ledwoch K, Said J, Norville P, Maillard JY. Artificial dry surface biofilm models for testing the efficacy of cleaning and disinfection. Lett Appl Microbiol. 2019;68:329–36. https://0-doi-org.brum.beds.ac.uk/10.1111/lam.13143.

    Article  CAS  PubMed  Google Scholar 

  27. Ma L, Conover M, Lu H, Parsek MR, Bayles K, Wozniak DJ. Assembly and development of the Pseudomonas aeruginosa biofilm matrix; 2009. https://0-doi-org.brum.beds.ac.uk/10.1371/journal.ppat.1000354.

    Book  Google Scholar 

  28. Moormeier DE, Bayles KW. Staphylococcus aureus biofilm: a complex developmental organism. Mol Microbiol. 2017;10:365–76.

    Article  Google Scholar 

  29. Donskey CJ. Does improving cleaning and disinfection reduce healthcare-associated infections? American J Infect Control. 2013;41:12–9.

    Article  Google Scholar 

  30. Almatroudi A, Gosbell IB, Hu H, Jensen O, et al. Staphylococcus aureus dry-surface biofilms are not killed by sodium hypochlorite: implications for infection control. J Hosp Infect. 2016;93:263–70. https://0-doi-org.brum.beds.ac.uk/10.1016/j.jhin.2016.03.020.

    Article  CAS  PubMed  Google Scholar 

  31. Sanchez-Vizuete P, Orgaz B, Aymerich S, et al. Pathogen protection against the action of disinfectants in multispecies biofilms. Front Microbiol. 2015. https://0-doi-org.brum.beds.ac.uk/10.3389/fmicb.2015.00705.

  32. Stewart SP. Antimicrobial tolerance in biofilms. Microbiol Spectr. 2015. https://0-doi-org.brum.beds.ac.uk/10.1128/microbiolspec.MB-0010-2014.

  33. Köse H, Yapar N. The comparison of various disinfectants’ efficacy on Staphylococcus aureus and Pseudomonas aeruginosa biofilm layers. Turkish J Me Sci. 2017;47:1287–94.

    Article  Google Scholar 

  34. Otter JA, Vickery K, Walker JT, et al. Surface-attached cells, biofilms and biocide susceptibility: implications for hospital cleaning and disinfection. J Hosp Infect. 2015;89:16–27. https://0-doi-org.brum.beds.ac.uk/10.1016/j.jhin.2014.09.008.

    Article  CAS  PubMed  Google Scholar 

  35. Chen X, Stewart PS. Chlorine penetration into artificial biofilm is limited by a reaction-diffusion interaction. Environ Sci Technol. 1996;30:2078–83.

    Article  CAS  Google Scholar 

  36. Donlan RM. Role of biofilms in antimicrobial resistance. ASAIO J. 2000;46:47–52.

    Article  Google Scholar 

  37. Almatroudi A, Tahir S, Hu H, et al. Staphylococcus aureus dry-surface biofilms are more resistant to heat treatment than traditional hydrated biofilms. J Hosp Infect. 2018;98:161–7.

    Article  CAS  Google Scholar 

  38. Environmental Protection Agency. EPA MLB SOP MB-19: growing a biofilm using the CDC biofilm reactor. EPA. 2017. https://www.epa.gov/sites/production/files/2017-07/documents/mb-19-may-2017.pdf. Accessed 4 Aug 2019.

  39. ASTM International. Standard quantitative disk carrier test method for determining bactericidal, virucidal, fungicidal, mycobactericidal, and sporicidal activities of chemicals: active standard ASTM E2197. ASTM Compass. 2018. https://compass.astm.org/EDIT/html_annot.cgi?E2197+17e1 Accessed 4 Feb 2020.

  40. Environmental Protection Agency. EPA MLB SOP MB-20: Single tube method for determining the efficacy of disinfectants against bacterial biofilm. EPA. 2017. https://www.epa.gov/sites/production/files/2017-07/documents/mb-20-may-2017.pdf. Accessed 4 Aug 2019.

  41. Center for Disease Control and Prevention. Disinfection and Sterilization. CDC. 2019. https://www.cdc.gov/infectioncontrol/guidelines/disinfection/index.html. Accessed 4 Aug 2019.

  42. Murtey DM, Ramasamy P. Sample preparations for scanning electron microscopy – life sciences; 2016. https://0-doi-org.brum.beds.ac.uk/10.5772/61720.

    Book  Google Scholar 

  43. Environmental Protection Agency. Methods and guidance for testing the efficacy of antimicrobial products against biofilms on hard, non-porous surfaces. EPA. 2017. https://www.epa.gov/pesticide-analytical-methods/methods-and-guidance-testing-efficacy-antimicrobial-products-against#efficacy-data. Accessed 31 Jul 2019.

  44. Chowdhury D, Rahman A, Hu H, Jensen SO, Deva AK, Vickery K. Effect of disinfectant formulation and organic soil on the efficacy of oxidizing disinfectants against biofilms. J Hosp Infect. 2018. https://0-doi-org.brum.beds.ac.uk/10.1016/j.jhin.2018.10.019.

  45. Onyango LA, Alreshidi MM. Adaptive metabolism in staphylococci: survival and persistence in environmental and clinical settings. J Pathogens. 2018. https://0-doi-org.brum.beds.ac.uk/10.1155/2018/1092632.

  46. Donlan RM. Biofilms: microbial life on surfaces. Emerg Infect Dis. 2002;8:881–90.

    Article  Google Scholar 

  47. Meesilp N, Mesil N. Effect of microbial sanitizers for reducing biofilm formation of Staphylococcus aureus and Pseudomonas aeruginosa on stainless steel by cultivation with UHT milk. Food Sci Biotech. 2018;28:289–96.

    Article  Google Scholar 

  48. Iibuchi R, Hara-Kudo Y, Hasegawa A, Kumagai S. Survival of Salmonella on a polypropylene surface under dry conditions in relation to biofilm-formation capability. J of Food Protec. 2010;73:1506–10.

    Article  Google Scholar 

  49. Magrex-Debar E, Lemoine J, Gelle MP. Evaluation of biohazards in dehydrated biofilms on foodstuff packaging. Int J of Food Microbiol. 2000;55:239–43.

    Article  Google Scholar 

  50. Marshall KC, Goodman AE. Effects of adhesion on microbial cell physiology. Colloids Surfaces B: Biointerfaces. 1994;2:1–8.

    Article  Google Scholar 

  51. O’Connor A, McClean S. The role of universal stress proteins in bacterial infections. Curr Med Chem. 2017;24:3970–9.

    Article  Google Scholar 

  52. Nystrom T, Olson RM, Kjellerberg S. Survival, stress resistance and alterations in protein expression in the marine Vibrio sp. strain S14 during starvation for different individual nutrients. Appl. Environ. Microbiol. 1992;58:55–65.

    CAS  Google Scholar 

Download references

Acknowledgements

Dr. Oliver is supported by the USDA National Institute of Food and Agriculture Hatch project 2016–67017-24459.

Funding

This work was supported by Diversey Inc., Charlotte, NC, USA.

Author information

Authors and Affiliations

Authors

Contributions

CAN and MV performed trials to develop the model, analysed and interpreted the data generated, and wrote the manuscript. XL provided industry experience, designed elements of the experimental protocol, and was a contributor in writing and editing the manuscript. PT also provided industry experience and was a contributor in writing and editing the manuscript. HFO served as the principle investigator for the study and was a contributor in writing and editing the manuscript. All authors read and approved the final manuscript.

Corresponding author

Correspondence to Haley F. Oliver.

Ethics declarations

Ethics approval and consent to participate

Not applicable.

Consent for publication

Not applicable.

Competing interests

HFO, CAN, MV, report grants from Diversey, Inc. during the conduct of the study. PT and XL reports grants from Diversey, Inc. during the conduct of the study; personal fees from Diversey, Inc., outside the submitted work.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Nkemngong, C.A., Voorn, M.G., Li, X. et al. A rapid model for developing dry surface biofilms of Staphylococcus aureus and Pseudomonas aeruginosa for in vitro disinfectant efficacy testing. Antimicrob Resist Infect Control 9, 134 (2020). https://0-doi-org.brum.beds.ac.uk/10.1186/s13756-020-00792-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s13756-020-00792-9

Keywords