http://orcid.org/0000-0002-4650-0516
Figures
Abstract
Background
Crimean-Congo Haemorrhagic fever Virus (CCHFV) is a rapidly emerging vector-borne pathogen and the cause of a virulent haemorrhagic fever affecting large parts of Europe, Africa, the Middle East and Asia.
Methodology/principle findings
An isothermal recombinase polymerase amplification (RPA) assay was successfully developed for molecular detection of CCHFV. The assay showed rapid (under 10 minutes) detection of viral extracts/synthetic virus RNA of all 7 S-segment clades of CCHFV, with high target specificity. The assay was shown to tolerate the presence of inhibitors in crude preparations of mock field samples, indicating that this assay may be suitable for use in the field with minimal sample preparation. The CCHFV RPA was successfully used to screen and detect CCHFV positives from a panel of clinical samples from Tajikistan.
Conclusions/significance
The assay is a rapid, isothermal, simple-to-perform molecular diagnostic, which can be performed on a light, portable real-time detection device. It is ideally placed therefore for use as a field-diagnostic or in-low resource laboratories, for monitoring of CCHF outbreaks at the point-of-need, such as in remote rural regions in affected countries.
Author summary
The Crimean-Congo Haemorrhagic fever (CCHF) recombinase polymerase amplification assay is a new, rapid and portable diagnostic method. It has been developed for the detection of infection with CCHF virus (CCHFV), the cause of a deadly haemorrhagic disease in humans and an emerging global health threat. As a rapid diagnostic suitable for use on a portable and lightweight detection device, this has the potential to be used for fast-turnaround diagnosis at the point of need, providing timely results to clinicians at the bedside and preventing the spread of virus in the hospital setting. As a portable diagnostic it would also enable the diagnosis of CCHFV to be taken out of the laboratory during an outbreak, enabling testing in field laboratories or community clinics.
Citation: Bonney LC, Watson RJ, Afrough B, Mullojonova M, Dzhuraeva V, Tishkova F, et al. (2017) A recombinase polymerase amplification assay for rapid detection of Crimean-Congo Haemorrhagic fever Virus infection. PLoS Negl Trop Dis 11(10): e0006013. https://doi.org/10.1371/journal.pntd.0006013
Editor: Patricia V. Aguilar, University of Texas Medical Branch, UNITED STATES
Received: May 12, 2017; Accepted: October 4, 2017; Published: October 13, 2017
Copyright: © 2017 Bonney et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: All relevant data are within the paper and its Supporting Information files.
Funding: This work was supported by funding from the Cabinet Office UKBEP /Dstl—Diagnostic support to Tajikistan. The views expressed in this publication are those of the authors and do not necessarily represent the views of the funders. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
CCHFV is an RNA virus classified in the Orthonairovirus genus, of the family Nairoviridae, within the order Bunyavirales (International Committee on Taxonomy of Viruses 2016). It displays a high degree of sequence variability [1] with the S-segments of CCHF viruses being phylogenetically grouped into 7 clades (Europe 1, Europe 2, Africa 1, Africa 2, Africa 3, Asia 1 and Asia 2) [2][3][4].
CCHF is easily transmitted by close contact and causes a virulent haemorrhagic fever in humans for which there is no effective prophylaxis or treatment: in consequence it is classified by the Advisory Committee on Dangerous Pathogens (ACDP) as a Hazard Group 4 pathogen mandating maximum microbiological containment (containment level 4; CL4). CCHFV has been detected in large parts of the globe including Southern and Eastern Europe, Central Asia, Western China, the Middle East and most of Africa [1] [5] [6]. CCHF has been described as “one of the most rapidly emerging viral haemorrhagic fevers in Africa, Asia and Eastern Europe,” by the WHO, with case numbers increasing in many countries in recent years [7] [8] [9]. The case fatality for CCHF is typically between 5–50%, but has been documented as high as 73% [1] [10] [11]. Ticks of the genus Hyalomma function as vector as well as natural reservoir of CCHFV [12]. The Hyalomma tick feeds on various vertebrate hosts and as a consequence CCHFV is carried by wild animals and livestock [13] [14] and can be transmitted to humans both by tick bite and by contact with infected bodily fluids [1].
With outbreaks occurring in rural areas; commonly in low-resource regions with limited access to conventional laboratory facilities, there is an urgent need for a simple, fast, reliable and portable diagnostic test [8]. This would enable rapid diagnosis and public health management of suspect human cases, as well as surveillance of the virus in vertebrate and tick populations in isolated locations. CCHFV infection has a propensity for nosocomial transmission, especially during the early stages of disease when symptoms are poorly recognised and laboratory diagnosis is not commonly requested or performed. In these circumstances it can lead to outbreaks of highly pathogenic disease sustained by human-to-human transmission [8] [10] [12]. Rapid detection of positive cases could lead to more timely and appropriate support for patients, including their isolation to prevent transmission and the protection of health care providers by initiation of barrier nursing techniques. More convenient tools for CCHFV surveillance in the environment would also facilitate our understanding of the natural fluxes of virus in populations and help develop effective countermeasures and timely interventions [8].
There has been a recent proliferation of research into next-generation molecular diagnostics with improvements in performance relative to traditional PCR [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26]. Many of these adopt a single (isothermal) incubation temperature and a variety of non-thermal methods to separate duplex DNA, allowing amplification of a target region without the need for thermal cycling. Recombinase polymerase amplification (RPA) is a well-established isothermal molecular technique and compares favourably with other isothermal methods such as LAMP (Loop-mediated isothermal amplification), with a rapid turnaround time and simple set-up. It is performed at a single low temperature (37–42 degrees), using a recombinase enzyme to separate the DNA duplex and single-stranded DNA-binding proteins to stabilise the open complex [16], allowing amplification and detection with standard probe chemistries. As there is no thermal cycling, there is no time-constraint on the amplification as there is with PCR and amplification occurs continually. This makes the RPA method significantly faster, with amplification occurring within 3–5 minutes for high copy number samples [15] [16] [27].
The low RPA incubation temperature and high speed makes assay systems based on the RPA technology particularly amenable to field-use due to the low power requirements. This allows detection on simple portable devices, which can be small and lightweight [15] [16], including both miniaturised isothermal real-time detectors and fully automated rapid point-of care devices [15] [16]. RPA and other isothermal methods have shown high tolerance to inhibitors present in crude preparations of patient samples and arthropod vectors [28] [29] [30]. The elimination of laboratory intensive extraction procedures simplifies and speeds up the assay set-up and streamlines the automated point-of-care device, potentially making it lighter and cheaper to both purchase and run.
The aim of this work was to develop an RPA assay as an alternative to the existing RT-PCR methods [31] and provide a fast and fieldable diagnostic, which could be used to test for CCHFV with minimal sample preparation, allowing surveillance and public health management decisions in isolated regions. The RPA shows a high degree of flexibility, so it could also be used in a clinic setting or a traditional laboratory, providing very rapid turnaround of results (<20 minutes), with the potential for high-throughput in a 96-well plate format. The aims of the study were successfully achieved, with the development of a rapid RPA-based isothermal diagnostic capable of detecting all 7 S-segment phylogenetic clades of CCHF within 10 minutes.
Materials and methods
Ethics statement
Sera samples tested in this study were previously taken for the laboratory diagnosis of CCHFV and were classified as clinical specimens. No samples were collected specifically for this work, thus ethical approval for the study design was not required. Samples were anonymised within Tajikistan, so investigators were only supplied with sequentially numbered samples. Sera samples were collected and stored within the Tajik Research Institute of Preventive Medicine, Tajikistan. Samples for testing at Public Health England, UK were sent in accordance with national guidelines for both Tajikistan and the UK.
Primer and probe design
The CCHF RPA assay was designed using alignments of the S-segments of CCHF strains and examination for regions of genomic stability, together with an NCBI BLAST search to check for CCHF specificity. The aim was to find a region which would allow uniform detection of all of the 7 clades of CCHF, but would not detect any non-CCHF sequences. A series of primers and probes were designed within this region and a small selection of synthetic RNA fragments (approximately 1.7kb) were designed to enable primer-probe testing. The primer and probe sets were sequentially tested for detection of the synthetic templates. The lead primer and probe combination was taken forward for further validation.
Primer and probe preparation
Primers were prepared by Integrated DNA Technologies (IDT) and an RPA EXO probe was synthesised by ATD BIO; all as HPLC purified material. Primer and probe stocks were prepared at 100μM in a Tris-EDTA buffer and diluted to 10μM in molecular grade dH20. A primer mix was prepared to 5μM (of both forward and reverse primers) and both primer mix and probe stocks were frozen at -20°C in single use aliquots.
Synthetic CCHF S-segment RNA template preparation
Synthetic CCHF S-segment DNA fragments from a selection of Europe group 1 and 2 strains and Africa 1 and 3 strains were prepared by IDT (AY277672, position 1–1673, DQ211638, position 1–1659, DQ211643, position 1–1671, NC005302, position 1–1672 and U88411, position 1–1686) with the addition of T7 and SP6 promoters at the 5’ and 3’ ends respectively (see S1 Fig). RNA templates were prepared from the synthetic DNA using a T7 High Yield RNA synthesis kit (NEB). Approximately 1μg of DNA was added per reaction to a 0.2ml PCR tube with 2μl each of 100mM ATP, GTP, UTP and CTP, 2μl RNA polymerase mix, 2μl 10X reaction buffer and sufficient molecular grade dH20 to make the reaction up to 20μl. The reaction was incubated at 37 °C for two hours in a thermocycler. The RNA template was then DNase-treated to remove the original template contamination; 70μl nuclease free dH2O was added per tube with 10μl 10X DNase I buffer and 2μl RNase-free DNase I (NEB). The tubes were mixed and incubated for 15 mins at 37°C. The RNA was purified using a Qiagen RNeasy minikit and quantified using a Qubit broad range RNA kit (Thermo-Fisher Scientific).
Crude sample preparation
Crude samples included human serum male AB (Sigma H422-20ML), female Ixodes ricinus ticks (Charles River) and Surine standard -ve control urine (Sigma S-020-50ML). Sample preparation included aliquoting of the human male serum and urine standard into single use aliquots and storage at -20°C and fridge temperature respectively. The tick samples were prepared as tick pools (10 ticks) and frozen at -20 °C. The ticks were prepared by adding 300μl molecular grade water, transferring to Precellys-R tubes and homogenising using a Precellys tissue homogeniser (3X 20 seconds, with 30 second breaks). The homogenate was centrifuged for 5 minutes at 5900xg and the supernatant retained. A serial dilution of each of the neat samples was prepared by diluting in molecular grade water.
CCHF RPA on the Applied Biosystems 7500 platform
The CCHF RPA assay was performed in a 50μl volume using a TwistAmp Exo-RT kit (TwistDx Cambridge UK). A master mix was prepared, composed of the following/reaction; 4.2μl of a 5μM primer mix (forward and reverse primer), 0.6μl of the 10μM Exo-probe, 29.5μl rehydration buffer and sufficient distilled water to make the reaction up to 50μl after addition of all assay components. Where crude samples were used, 20 units (0.5μl) of an RNase inhibitor was also included (RNaseOUT 40U/μl Invitrogen). The master mix was distributed into the wells of a 96-well PCR plate. 1–5μl of template (together with 5μl crude sample if used) was added and the reaction mixture combined with the lyophilised enzyme pellet, before returning to the plate. The supplied magnesium acetate was diluted to 140mM with molecular grade dH20, 5μl was added to each well and the plate briefly centrifuged before running at 40 °C for 40 minutes on an Applied Biosystems 7500 real-time PCR system, with fluorescence detection every 60 seconds in the FAM channel. The threshold was set at 50,000 delta Rn.
CCHF RPA with an RT-RPA basic kit
The RT-RPA basic assay was performed in a 50μl volume using a TwistAmp Basic-RT kit (TwistDx Cambridge UK). A master mix was prepared, composed of the following/reaction; 4.2μl of 5μM primer mix (forward and reverse primer), 29.5μl rehydration buffer and sufficient distilled water to make the reaction up to 50μl after addition of all assay components. The master mix was distributed into 0.2ml PCR tube strips. 5μl of template was added and the reaction mixture combined with the lyophilised enzyme pellet, before returning to the wells. The supplied magnesium acetate was diluted to 140mM with molecular grade dH20 and 5μl was added to each well. The tube strip was then briefly centrifuged before incubating at 40 °C for 40 minutes on a thermocycler. The products of the RPA were purified using a Qiagen QIAquick PCR purification kit, then run on an Invitrogen 2% Agarose gel (E-Gel EX with Sybr Gold II) with an Invitrogen E gel 1Kb plus ladder.
CCHF RT-PCR on the Applied Biosystems 7500 platform
This method was adapted from the paper by Atkinson et al 2012 [31]. Briefly, the CCHF RT-PCR assay was performed in a 20μl volume using a Superscript III Platinum One-step quantitative RT-PCR kit (Invitrogen). For each reaction, a 15μl master mix was prepared containing 10μl of the supplied 2X reaction mix, 0.8μl of superscript III RT/Taq enzyme mix and final concentrations of each primer of 1.2μM and probe of 0.8μM. Where crude samples were used, 20 units (0.5μl) of an RNase inhibitor was also included (RNaseOUT 40U/μl Invitrogen) and sufficient molecular grade water was added for a final reaction volume of 20μl, once all assay components were included. The master mix was distributed into the wells of a 96-well PCR plate. 3–5μl of template (together with 5μl crude sample if used) was added and the plate briefly centrifuged before being run on an Applied Biosystems 7500 real-time PCR system. The PCR run parameters included a 10 minute RT step at 50 °C, followed by a 2 minute denaturation step at 95°C, an amplification stage composed of 45 cycles of denaturation: 95°C for 10 seconds, and annealing/extension at 60°C for 40 seconds, followed by a final extension at 40 °C for 20 seconds. Fluorescence was detected in the FAM channel, once each cycle during the amplification stage. The threshold was set at 250,000 delta Rn.
CCHF positive viral panel
A collection of CCHFV strains representing each of the following S-segment clades: Asia 1, Asia 2, Africa 2, Africa 3 and Europe 1 were cultured and viral RNA was extracted using a standard RNA extraction kit (QIAamp viral RNA kit). Synthetic whole S-segment viral RNA was used to represent Africa 1 and Europe 2 clades.
Negative viral panel
Viral RNA extracts covering Mammarenavirus, Marburgvirus, Henipavirus, Flavivirus, Alphavirus and the Orthohantavirus genera were donated by the Rare and Imported Pathogens Laboratory, PHE Porton from a collection of standard diagnostic assay positive controls. They are described as positive, with a Ct of approximately 30 in their respective real-time assays, or as having a clear and distinct band after electrophoresis of PCR products following a conventional block-based PCR. The Orthonairovirus samples Hazara and Issyk-Kul were supplied in-house by the National Collection of Pathogenic Viruses and the Virology and Pathogenesis group respectively and were confirmed positive using a block-based PCR.
Preparation of RNA extracts from field samples for testing on the RPA
Ticks identified as Hyalomma anatolicum were collected from the Gisar, Hissor, Kulob, Rumi, Jillikul and Hamadoni districts of Tajikistan and prepared as pools of 10 ticks by the Tajik Research Institute of Preventive Medicine, Dushanbe, Tajikistan. The ticks were added to 1ml Qiagen AVL buffer and were homogenised using a disposable plastic pestle and mortar, allowing 10 minutes post-homogenisation for inactivation. Sera samples were collected from suspected CCHF patients from the Rudaki, Nahiyeh Voseh, Bokhtar, Kologh, Nahiyey farkhor, Moominabad, Khatlon, Bolgevon, Tursonzadeh, Kabadian, Dangarah, Vosse and Kulob districts of Tajikistan by the Tajik Research Institute of Preventive Medicine, Dushanbe, Tajikistan. The sera samples were heat-inactivated for 30 minutes at 56°C and both the inactivated tick pool samples and sera were frozen at -80 for storage. The tick homogenate was centrifuged at 4000xg for 10 minutes to pellet the particulate matter. A 140μl volume of the neat sera samples and tick pool supernatant were extracted using a Qiagen QIAamp viral RNA mini kit, with elution into 80μl elution buffer. Note that most sera samples represent a single sera collection, taken on a single day from separate patients. Where samples are multiple sample collections, taken on separate days from a single patient, the sample number is followed by a letter (e.g. sample 4a, 4b, 4c) and a collection number is given.
Accession Numbers
Genbank accession numbers/ NCBI reference sequences for genes used in this study: Bagdad 12 (Genbank accession number AJ538196), Dubai 616 (Genbank accession number JN108025), DAK 8194 (Genbank accession number U88411), Semunya (Genbank accession number DQ076413), Congo 3010 (Genbank accession number DQ144418), SPU4/81(Genbank accession number DQ076416), IbAr10200 (NCBI reference sequence NC_005302), Kosovo Hoti (Genbank accession number DQ133507), ROS/T128044 (Genbank accession number AY277672), Drosdov (Genbank accession number DQ211643), AP92 (Genbank accession number DQ211638).
Results
Assay design
The CCHFV RPA assay was developed by making alignments of CCHF S-segment sequences and analysing them for stable regions to identify sequences that could be used as the basis for primer and probe design. The lead primer-probe set (see Fig 1A) is shown aligned to a selection of CCHFV strains representing the 7 S-segment clades of the virus (Africa 1, Africa 2, Africa 3, Asia 1, Asia 2, Europe 1 and Europe 2 (Fig 1B). The regions chosen for the RPA primer design were in the vicinity of the primer binding sites of our in-house CCHF PCR, which has shown good cross-clade detection [31]. Some single base mismatches within the primer and probe regions remained, but this was unavoidable due to the high intrinsic sequence variability of the CCHFV S-segment. We were confident that our RPA assay would show good amplification across the clades however, as there was significant overlap in the design region with the PCR and the RPA primers were generally well matched and long, thereby increasing resilience to minimal base-mismatches. The target region was also subjected to a BLAST (blast.ncbi.nlm.nih.gov) search to check for cross-reactivity with non-CCHFV sequences; no non-CCHFV sequences were identified, suggesting that the assay would be CCHFV-specific.
(a) Primer, probe and synthetic template DNA sequences. Table showing primer and probe sequences and information on the synthetic DNA templates which were used as transcription templates to create the RNA assay controls. Please see supplementary data for the full DNA sequences of the synthetic DNA templates. (b) Alignment of CCHF strains at the assay design region. Alignment of a selection of strains of CCHFV representing all 7 S-segment clades of CCHFV (Africa 1, Africa 2, Africa 3, Asia 1, Asia 2, Europe 1 and Europe 2), with inclusion of the RPA forward primer (CCHF RPA Fw), the reverse primer (CCHF RPA Rev) and the probe (CCHF RPA probe 1).
Detection limit
The detection limit of the CCHFV RPA assay was determined by testing with a serial dilution of a synthetic RNA S-Segment of the Europe 1 strain AY277672 from 5X106 template copies down to 50 copies (Fig 2). Rapid detection was observed, occurring within 5 minutes for the detection of 50X106 template copies, just over 10 minutes for the detection of 5X103 copies and 16 minutes for the detection of 500 copies. The detection limit was between 500 and 50 copies, with strong and rapid detection down to 500 copies, but with variable and sub-threshold detection at 50 copies. The probit analysis gave a predictive value for the limit of detection of this assay as 251 copies of target. The data showed a good correlation between copy number and time to positive, suggesting that this method is either quantitative or semi-quantitative.
Limit of detection of the CCHF RPA assay with a serial (1 in 10) dilution of synthetic RNA template of Europe I strain AY277672. The data is represented graphically as (a) Delta Rn against time (minutes), in the form of a table of time to positive (TTP value) vs target copy number and as TTP vs target copy number, with a regression line indicating data correlation (b). The data is also shown as a probit analysis performed using the statistical software Matlab for more accurate detection limit approximation (c), with application of a curve-fitting programme (a shape-preserving piecewise cubic interpolation). Note that the probit analysis uses a lower threshold (Delta Rn 18000) to enable the calculation. The values shown for all LOD data are the mean of 8 independent experiments, each of which was performed with three replicates.
Cross-clade detection of CCHFV
The CCHFV RPA was subsequently tested against a selection of strains representing all 7 extant clades of the viral S-segment. This included where possible cultured viral extract, and a selection of 5X105 copies/reaction synthetic whole S-segment RNA templates (See S1 Fig. for synthetic target sequence information). The target was successfully identified (Fig 3), across all 7 clades, with the same rapid detection noted earlier. The RPA time to positive (TTP) was less than 12 minutes for all viral extracts, with most detected between 5–10 minutes. Data from a CCHFV S-segment RT-PCR [31] is shown alongside, with the TTP values ranging from 39.6 to 54.6 minutes. The CCHFV RPA was also performed with a basic RT-RPA kit (no exo-probe) and synthetic CCHFV RNA templates. When analysed by gel electrophoresis with a DNA intercalating dye, the results showed a single band of the expected size of around 150bp, suggesting that only the target region is amplified (see S2 Fig).
Table showing detection of CCHF viral extracts and synthetic CCHF RNA templates by CCHF RPA assay, in the form of TTP (minutes) and number of replicates detected. The synthetic RNA templates were used at 5X105 copies/reaction and viral extracts were confirmed positive by CCHF RT-PCR. The RT-PCR TTP (minutes) are included in the table. Note that the RPA values shown are the mean of 3 independent experiments, performed with 2–3 replicates.
Negative panel testing
The specificity of the CCHFV RPA was tested against a panel of viral extracts, encompassing both phylogenetically related strains and species which cause a similar haemorrhagic aetiology in humans and may be tested as part of a differential diagnosis. These included viruses from the Mammarenavirus, Marburgvirus, Henipavirus, Orthonairovirus and Orthohantavirus genera (Fig 4). All produced negative results, backing up the hypothesised specificity which had been suggested from the bioinformatic information. Of particular note is the fact that the closely-related Orthonairoviruses Hazara and Issyk-Kul were negative.
Table showing the results of a CCHF RPA with a negative viral panel, consisting of a selection of strains from the Alphavirus, Mammarenavirus, Marburgvirus, Flavivirus, Orthohantavirus, Henipavirus and Orthonairovirus genera. Results represent 3 separate experiments, each performed with 3 replicates.
Effect of inhibitors in crude sample preparations
Isothermal molecular amplification methods such as RPA and LAMP are tolerant to crude samples, allowing detection in patient bodily fluids, arthropod preparations and other crude material with minimal processing and avoiding the need for extraction [28] [29] [32] [33] [34]. The inhibitory effect of interfering agents within a crude sample on the CCHFV RPA was studied by spiking a known quantity of synthetic CCHFV template into crude preparations of human serum, a homogenised tick pool and synthetic human urine. Fig 5A shows strong detection in the presence of each crude sample. There is however evidence of some inhibition at the higher crude sample dilutions, with higher TTP values, although the urine sample showed no observable inhibition at any concentration. Serum showed full detection of the 5X106 copies/reaction template at the 1-in-10 dilution and the tick preparation at the 1-in-100 dilution. This suggests the CCHFV RPA can tolerate the inhibitors present in crude samples with minimal sample preparation, when the copy number of target is high.
(a) Effect of crude sample dilution on detection in the RPA assay. RPA performed with 5X106 copies/ reaction of synthetic RNA template of Europe I strain AY277672 and a serial (1 in 10) dilution of crude preparations of human male serum, urine and tick pool homogenate. (b) Effect of crude material on assay sensitivity–limit of detection. RPA performed with a serial (1 in 10) dilution of synthetic RNA template of Europe I strain AY277672 and 1 in 10 diluted crude preparations of serum and urine, or 1 in 100 diluted crude preparations of tick pool homogenate. The RPA results are shown as TTP (minutes) and represent the mean of 3–4 independent experiments, each of which was performed with three replicates. RT-PCR data is also included for comparison, with the values shown representing the mean TTP (mins) of 2–3 separate experiments, each of which was performed with 2 replicates.
We next examined the limit of detection in minimally diluted crude samples. Fig 5B indicates that the urine and tick preparation had no effect on the assay limit of detection, with both showing full detection down to 500 copies and partial detection at 50 copies, with comparable TTP values to data using un-spiked purified RNA. Serum showed a minimal effect on the detection limit, with partial detection at 50 and 500 copies and higher TTP values, but with comparable TTP and 100% detection at 5000 copies. Overall however this work suggests that the inhibitory effect of diluted crude samples on the CCHFV RPA is minimal. All crude sample preparations except for the urine showed some inhibitory effect on the detection limit of the CCHFV RT-PCR, with approximately a 10-fold change for the tick and serum preparations.
Testing of 2013–2015 CCHF outbreak samples
CCHFV has caused seasonal outbreaks [35] of disease in Tajikistan since its discovery in the region over 40 years ago. The assay including a portable incubator and reader (Optigene Genie III) was taken to a collaborating laboratory in Dushanbe; the Tajik Institute for Preventive Medicine. This Ministry of Health institute undertakes diagnostic testing for a range of serious pathogens and is the National Centre for CCHF diagnosis; it has regular access to CCHF clinical samples and supports national disease reporting programmes. The CCHFV RPA was set up and used on a collection of extracted patient sera samples and environmental tick extracts obtained in relation to outbreaks of CCHF in 2013–2015 in Tajikistan, these field samples were tested alongside a standard RT-PCR assay [31] that had already been established. The field samples were then sent back to our UK-based laboratory for further testing. The CCHFV RPA (Fig 6) detected nearly all confirmed positives (88% of 8 positive tick samples and 100% of 13 positive sera samples), missing only one very late TTP weakly positive tick extract. The RPA also verified the negatives (100% of 8 negative tick samples and 91% of 11 independent (from separate patients) negative sera samples), with one exception (sample 16). It is possible this could be a false positive, however this was a sample which had previously been tested by ELISA and found to be IgM positive for CCHF, so it is likely that this is actually a positive sample. The majority of positive samples were detected in less than 20 minutes (4 samples were detected between 21 and 31 minutes).
CCHF RPA testing of a collection of field samples from the 2013–2015 CCHF outbreaks in Tajikistan. Sample types include extracted human sera and extracted tick pool homogenate. The RPA results are shown as TTP (minutes) and number of replicates detected. RT-PCR results are shown as TTP (minutes).
Discussion
A CCHFV RPA has been successfully developed and shown to rapidly detect all 7 CCHFV S-segment types, despite the presence of a small number of single mismatches within the primer and probe binding sites.
Data from a negative panel of closely related viruses including those that might be included as part of a differential diagnosis, illustrate the high specificity for CCHFV. The sensitivity of this assay was statistically estimated to be 251copies of RNA target, which compares well with other published RPA assays [20] [21] [23] [24]. While this sensitivity is lower than the published RT-PCR for CCHFV of 5–50 copies [31], it is still within the clinical detection range present in most acute CCHF patients, as demonstrated by its ability to pick-up all of the confirmed sera positives in the panel of samples from an outbreak in Tajikistan. The assay is also very rapid, providing clear results within 20 minutes (5 minutes for the detection of 50X106 template copies, 10 minutes for the detection of 5X103 copies and 16 minutes for the detection of 500 copies) and an average of 13.8 mins (range 6.8–30.7 mins) for the real clinical/field samples. The CCHFV RPA performed well with spiked crude samples with only a small level of dilution required to remove inhibitory effects. In addition the CCHF RPA strongly detected a clinical sample which had been missed by the PCR, suggesting that the RPA may be able to detect a wider cross-section of CCHF strains than the existing PCR. This is supported by our cross-template detection study, in which the RPA detected a strain Drosdov, which the PCR failed to pick up.
The CCHF RPA has demonstrated its potential for use both as a field/low resource laboratory diagnostic and traditional laboratory test. It is significantly faster than existing RT-PCR-based methods (maximum run time of 35 minutes, compared to 1 hour 10 minutes of the RT-PCR) enabling faster-turnaround and key information to physicians and health care workers, underlining its suitability as a point-of-need diagnostic in the community clinic, or the field. The fast turnaround would also be of benefit in a standard laboratory set-up enabling high-throughput testing. The potential of this diagnostic in low resource settings is highlighted by its validation in Tajikistan using a simple portable isothermal real-time detector. This mirrors published literature generated with the Genie III device [36] and underlines the benefits of an isothermal diagnostic over the traditional RT-PCR in low resource settings.
The applicability of the RPA and other isothermal molecular assays to crude unprocessed clinical samples is often highlighted [28] [29] [30] as a useful advantage. While we show that the current assay is amenable to such samples, further studies will be needed to fully evaluate the potential for use of this assay with crude clinical material, including careful consideration of the biosafety implications when handling this HG4 virus. This will involve testing the RPA with live virus preparations spiked into crude sample material in addition to un-extracted virus in real clinical samples, to confirm whether native virus can be detected. The primary consideration when working with infectious viral material will be to examine methods for disrupting the viral envelope to allow access to the viral nucleic acid and to inactivate the virus to render it safe to handle, whilst avoiding adding to the complexity of the process.
Supporting information
S1 Fig. Sequences of synthetic CCHF S-segment DNA fragments with SP6 and T7 promoters.
Shown are the DNA fragments (5’-3’ orientation) designed to be a template for in vitro transcription to create the synthetic RNA templates used to test the RPA. The fragments are composed of a section of the S-segment of CCHF (in black), a T7 promoter (in blue) and an SP6 promoter (in green), flanked by GC-rich tails. (a) AY277672 S-segment DNA fragment, (b) DQ211638 S-segment DNA fragment, (c) DQ211643 S-segment DNA fragment, (d) NC005302 S-segment DNA fragment, (e) U88411 S-segment DNA fragment.
https://doi.org/10.1371/journal.pntd.0006013.s001
(TIF)
S2 Fig. CCHF RPA basic DNA gel.
Gel showing the products of a basic RT-RPA, (following PCR clean-up) performed with synthetic RNA fragments from a selection of CCHF strains; AY277672, DQ211638, NC005302 and DQ211643.
https://doi.org/10.1371/journal.pntd.0006013.s002
(TIF)
Acknowledgments
The authors would like to acknowledge the Virology and Pathogenesis group, the National Collection of Pathogenic Viruses, the High Containment Microbiology group and the Rare and Imported Pathogens Laboratory at Public Health England for the supply of nucleic acid material and the Tajik Institute for Preventive Medicine in Dushanbe for supplying field samples and performing the preliminary RPA field testing.
References
- 1. Bente DA, Forrester NL, Watts DM, McAuley AJ, Whitehouse CA, Bray M. Crimean-Congo hemorrhagic fever: history, epidemiology, pathogenesis, clinical syndrome and genetic diversity. Antiviral Res. 2013; 100(1): p. 159–189. pmid:23906741
- 2. Atkinson B, Latham J, Chamberlain J, Logue C, O'Donoghue L, Osborne J et al. Sequencing and phylogenetic characterisation of a fatal Crimean–Congo haemorrhagic fever case imported into the United Kingdom, October 2012. Euro Surveill. 2012; 17(48): p. 20327. pmid:23218389
- 3. Morikawa S, Saijo M, Kurane I. Recent progress in molecular biology of Crimean-Congo hemorrhagic fever. Comp Immunol Microbiol Infect Dis. 2007; 30(5–6): p.375–389. pmid:17692916
- 4. Zehender G, Ebranati E, Shkjezi R, Papa A, Luzzago C, Gabanelli E et al. Bayesian phylogeography of Crimean-Congo hemorrhagic fever virus in Europe. PloS One. 2013; 8(11): e79663 pmid:24223988
- 5. Messina JP, Pigott DM, Golding N, Duda KA, Brownstein JS, Weiss DJ, et al. The global distribution of Crimean-Congo hemorrhagic fever. Trans R Soc Trop Med Hyg. 2015; 109(8): p. 503–513. pmid:26142451
- 6. Sherifi K, Cadar D, Muji S, Robaj A, Ahmeti S, Jakupi X, et al. Crimean-Congo Hemorrhagic Fever Virus Clades V and VI (Europe 1 and 2) in Ticks in Kosovo, 2012. PLoS Negl Trop Dis. 2014; 8(9): p. e3168. pmid:25255381
- 7. Messina JP, Pigott DM, Duda KA, Brownstein JS, Myers MF, George DB, et al. A global compendium of human Crimean-Congo haemorrhagic fever virus occurrence. Sci Data. 2015; 2: p. 150016. pmid:25977820
- 8. Al-Abri SS, Abaidani IA, Fazlalipour M, Mostafavi E, Leblebicioglu H, Pshenichnaya N, et al. Current status of Crimean-Congo haemorrhagic fever in the World Health Organization Eastern Mediterranean Region: issues, challenges, and future directions. Int J Infect Dis. 2017; 58: p. 82–89. pmid:28259724
- 9. Maltezou HC, Andonova L, Andraghetti R, Bouloy M, Ergonul O, Jongejan F, et al. Crimean-Congo hemorrhagic fever in europe: current situation calls for preparedness. Euro surveill. 2010; 15(10): p. 19504. pmid:20403306
- 10. Conger NG, Paolino KM, Osborn EC, Rusnak JM, Günther S, Pool J, et al. Health Care Response to CCHF in US Soldier and Nosocomial Transmission to Health Care Providers, Germany, 2009. Emerg Infect Dis. 2015; 21(1): p. 23–31. pmid:25529825
- 11. Ince Y, Yasa C, Metin M, Sonmez M, Meram E, Benkli B, et al. Crimean-Congo hemorrhagic fever infections reported by ProMED. Int J Infect Dis. 2014; 26: p. 44–46. pmid:24947424
- 12. Appannanavar SB, Mishra B. An Update on Crimean Congo Hemorrhagic Fever. J Glob Infect Dis. 2011; 3(3): p. 285–292. pmid:21887063
- 13. Spengler JR, Bergeron E, Rollin PE. Seroepidemiological Studies of Crimean-Congo Hemorrhagic Fever Virus in Domestic and Wild Animals. PLoS Negl Trop Dis. 2016; 10(1): p. e0004210. pmid:26741652
- 14. Spengler JR, Estrada-Peña A, Garrison AR, Schmaljohn C, Spiropoulou CF, Bergeron É, et al. A chronological review of experimental infection studies of the role of wild animals and livestock in the maintenance and transmission of Crimean-Congo hemorrhagic fever virus. Antiviral Res. 2016; 135: p. 31–47 pmid:27713073
- 15. Craw P, Balachandran W. Isothermal nucleic acid amplification technologies for point-of-care diagnostics: a critical review. Lab Chip. 2012; 12(14): p. 2469–2486. pmid:22592150
- 16. Yan L, Zhou J, Zheng Y, Gamson AS, Roembke BT, Nakayama S, et al. Isothermal amplified detection of DNA and RNA. Mol Biosyst. 2014; 10(5): p. 970–1003. pmid:24643211
- 17. Cao Z, Wang H, Wang L, Li L, Jin H, Xu C, et al. Visual Detection of West Nile Virus Using Reverse Transcription Loop-Mediated Isothermal Amplification Combined with a Vertical Flow Visualization Strip. Front Microbiol. 2016; 7: p. 554. pmid:27148234
- 18. Toley BJ, Covelli I, Belousov Y, Ramachandran S, Kline E, Scarr N, et al. Isothermal strand displacement amplification (iSDA): a rapid and sensitive method of nucleic acid amplification for point-of-care diagnosis. Analyst. 2015; 140(22): p. 7540–7549. pmid:26393240
- 19. Marciniak J, Kummel A, Esener S, Heller M, Messmer B. Coupled rolling circle amplification loop-mediated amplification for rapid detection of short DNA sequences. BioTechniques. 2008; 45(3): p. 275–280. pmid:18778251
- 20. Euler M, Wang Y, Otto P, Tomaso H, Escudero R, Anda P, et al. Recombinase polymerase amplification assay for rapid detection of Francisella tularensis. J Clin Microbiol. 2012; 50(7): p. 2234–2238. pmid:22518861
- 21. Euler M, Wang Y, Heidenreich D, Patel P, Strohmeier O, Hakenberg S, et al. Development of a panel of recombinase polymerase amplification assays for detection of biothreat agents. J Clin Microbiol. 2013; 51(4): p. 1110–1117. pmid:23345286
- 22. Abd El Wahed A, Patel P, Faye O, Thaloengsok S, Heidenreich D, Matangkasombut P, et al. Recombinase Polymerase Amplification Assay for Rapid Diagnostics of Dengue Infection. PLoS One. 2015; 10(6): p. e0129682. pmid:26075598
- 23. Teoh BT, Sam SS, Tan KK, Danlami MB, Shu MH, Johari J, et al. Early Detection of Dengue Virus by Use of Reverse Transcription-Recombinase Polymerase Amplification. J Clin Microbiol. 2015; 53(3): p. 830–837. pmid:25568438
- 24. Yang Y, Qin X, Wang G, Zhang Y, Shang Y, Zhang Z. Development of a fluorescent probe-based recombinase polymerase amplification assay for rapid detection of Orf virus. Virol J. 2015; 12: p. 206. pmid:26631157
- 25. Kersting S, Rausch V, Bier FF, von Nickisch-Rosenegk M. Rapid detection of Plasmodium falciparum with isothermal recombinase polymerase amplification and lateralflow analysis. Malar J. 2014; 13: p. 99. pmid:24629133
- 26. Rosser A, Rollinson D, Forrest M, Webster BL. Isothermal Recombinase Polymerase amplification (RPA) of Schistosoma haematobium DNA and oligochromatographic lateral flow detection. Parasit Vectors. 2015; 8: p. 446. pmid:26338510
- 27. Daher RK, Stewart G, Boissinot M, Bergeron MG. Recombinase Polymerase Amplification for Diagnostic Applications. Clin Chem. 2016; 62(7): p. 947–958. pmid:27160000
- 28. Mekuria TA, Zhang S, Eastwell KC. Rapid and sensitive detection of little cherry virus 2 using isothermal reverse transcription-recombinase polymerase amplification. J Virol Methods. 2014; 205: p. 24–30. pmid:24797461
- 29. Krõlov K, Frolova J, Tudoran O, Suhorutsenko J, Lehto T, Sibul H, et al. Sensitive and rapid detection of Chlamydia trachomatis by recombinase polymerase amplification directly from urine samples. J Mol Diagn. 2014; 16(1): p. 127–135. pmid:24331366
- 30. Rohrman B, Richards-Kortum R. Inhibition of recombinase polymerase amplification by background DNA: a lateral flow-based method for enriching target DNA. Anal Chem. 2015; 87(3): p. 1963–1967. pmid:25560368
- 31. Atkinson B, Chamberlain J, Logue CH, Cook N, Bruce C, Dowall SD et al. Development of a Real-Time RT-PCR Assay for the Detection of Crimean-Congo Hemorrhagic Fever Virus. Vector Borne Zoonotic Dis. 2012; 12(9): p. 786–793. pmid:22217175
- 32. Edwards T, Burke PA, Smalley HB, Gillies L, Hobbs G. Loop-Mediated Isothermal Amplification Test for Detection of Neisseria gonorrhoeae in Urine Samples and Tolerance of the Assay to the Presence of Urea. J Clin Microbiol. 2014; 52(6): p. 2163–2165. pmid:24622100
- 33. Kogovšek P, Hodgetts J, Hall J, Prezelj N, Nikolić P, Mehle N, et al. LAMP assay and rapid sample preparation method for on-site detection of flavescence dorée phytoplasma in grapevine. Plant Pathol. 2015; 64(2): p. 286–296. pmid:26146413
- 34. Hayashida K, Kajino K, Hachaambwa L, Namangala B, Sugimoto C. Direct Blood Dry LAMP: A Rapid, Stable, and Easy Diagnostic Tool for Human African Trypanosomiasis. PLoS Negl Trop Dis. 2015; 9(3): p. e0003578. pmid:25769046
- 35. Tishkova FH, Belobrova EA, Valikhodzhaeva M, Atkinson B, Hewson R, Mullojonova M. Crimean-Congo Hemorrhagic Fever in Tajikistan. Vector Borne Zoonotic Dis. 2012; 12(9): p. 722–726. pmid:22217164
- 36. Kurosaki Y, Magassouba N, Oloniniyi OK, Cherif MS, Sakabe S, Takada A, et al. Development and Evaluation of Reverse Transcription-Loop-Mediated Isothermal Amplification (RT-LAMP) Assay Coupled with a Portable Device for Rapid Diagnosis of Ebola Virus Disease in Guinea. PLOS Negl Trop Dis. 2016; 10(2): p. e0004472. pmid:26900929