Experimental Analysis on the Ultrasound-based Mixing Technique Applied to Ultra-low Sulphur Diesel and Bio-oils
How to cite (IJASEIT) :
A. T. Hoang, Q. V. Tran, A. R. M. S. Al-Tawaha, V. V. Pham, and X. P. Nguyen, “Comparative analysis on performance and emission characteristics of an in-Vietnam popular 4-stroke motorcycle engine running on biogasoline and mineral gasoline,” Renew. Energy Focus, vol. 28, pp. 47-55, 2019.
F. Zhao et al., “Numerical study of soot particles from low temperature combustion of engine fueled with diesel fuel and unsaturation biodiesel fuels,” Appl. Energy, vol. 211, pp. 187-193, 2018.
A. T. Hoang, “Prediction of the density and viscosity of biodiesel and the influence of biodiesel properties on a diesel engine fuel supply system,” J. Mar. Eng. Technol., 2018.
V. D. Tran, A. T. Le, V. H. Dong, and A. T. Hoang, “Methods of operating the marine engines by ultra-low sulfur fuel to aiming to satisfy MARPOLAnnex VI,” Adv. Nat. Appl. Sci., vol. 11, no. 12, pp. 34-40, 2017.
R. El Geneidy, K. Otto, P. Ahtila, P. Kujala, K. Sillanpí¤í¤, and T. Mí¤ki-Jouppila, “Increasing energy efficiency in passenger ships by novel energy conservation measures,” J. Mar. Eng. Technol., vol. 17, no. 2, pp. 85-98, 2018.
A. T. Hoang, “Waste heat recovery from diesel engines based on Organic Rankine Cycle,” Appl. Energy, vol. 231, pp. 138-166, 2018.
A. T. Hoang and D. C. Nguyen, “Properties of DMF-fossil gasoline RON95 blends in the consideration as the alternative fuel,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 8, no. 6, pp. 2555-2560, 2018.
B.-H. Lin, B.-X. Shen, and J.-G. Zhao, “A study on the prediction model for the lubricity of hydrogenated ultra-low sulfur diesel fuel,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 33, no. 3, pp. 254-264, 2010.
A. T. Hoang and A. T. Le, “A review on deposit formation in the injector of diesel engines running on biodiesel,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 41, no. 5, pp. 584-599, 2019.
A. T. Hoang and V. V. Pham, “A review on fuels used for marine diesel engines,” J. Mech. Eng. Res. Dev., vol. 41, no. 4, pp. 22-32, 2018.
G.-G. Choi, S.-J. Oh, and J.-S. Kim, “Non-catalytic pyrolysis of scrap tires using a newly developed two-stage pyrolyzer for the production of a pyrolysis oil with a low sulfur content,” Appl. Energy, vol. 170, pp. 140-147, 2016.
J. Hwang, C. Bae, C. Patel, R. A. Agarwal, T. Gupta, and A. K. Agarwal, “Investigations on air-fuel mixing and flame characteristics of biodiesel fuels for diesel engine application,” Appl. Energy, vol. 206, pp. 1203-1213, 2017.
A. T. Hoang and V. V. Pham, “A study of emission characteristic, deposits, and lubrication oil degradation of a diesel engine running on preheated vegetable oil and diesel oil,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 41, no. 5, pp. 611-625, 2019.
T. V. G. Jinu Joseph John, Simon Kuhn, Leen Braeken, “Ultrasound assisted liquid-liquid extraction in microchannels—A direct contact method,” Chem. Eng. Process. Process Intensif., vol. 102, pp. 37-46, 2016.
K. Keynejad, M. Nikazar, and B. Dabir, “Diesel desulfurization using a ultrasound-assisted oxidative process,” Pet. Sci. Technol., vol. 36, no. 11, pp. 718-725, 2018.
A. T. Hoang and M. T. Pham, “Influences of heating temperatures on physical properties, spray characteristics of bio-oils and fuel supply system of a conventional diesel engine,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 8, no. 5, pp. 2231-2240, 2018.
L. Tang, H. Fan, J. Guo, W. Zeng, and X. Tao, “Investigation on the mechanism of coal desulfurization by ultrasonic with peroxyacetic acid,” Energy Sources, Part A Recover. Util. Environ. Eff., pp. 1-11, 2018.
V. Hessel, H. Lí¶we, and F. Schí¶nfeld, “Micromixers—a review on passive and active mixing principles,” Chem. Eng. Sci., vol. 60, no. 8-9, pp. 2479-2501, 2005.
H. Katou, R. Miyake, and T. Terayama, “Non-contact micro-liquid mixing method using ultrasound,” JSME Int. J. Ser. B Fluids Therm. Eng., vol. 48, no. 2, pp. 350-355, 2005.
S. Aljbour, T. Tagawa, and H. Yamada, “Ultrasound-assisted capillary microreactor for aqueous-organic multiphase reactions,” J. Ind. Eng. Chem., vol. 15, no. 6, pp. 829-834, 2009.
S. Hí¼bner et al., “Ultrasound and microstructures—a promising combination?,” ChemSusChem, vol. 5, no. 2, pp. 279-288, 2012.
D. F. Rivas, P. Cintas, and H. J. G. E. Gardeniers, “Merging microfluidics and sonochemistry: towards greener and more efficient micro-sono-reactors,” Chem. Commun., vol. 48, no. 89, pp. 10935-10947, 2012.
I. Korkut and M. Bayramoglu, “Various aspects of ultrasound assisted emulsion polymerization process,” Ultrason. Sonochem., vol. 21, no. 4, pp. 1592-1599, 2014.
M. Mostafaei, H. Javadikia, and L. Naderloo, “Modeling the effects of ultrasound power and reactor dimension on the biodiesel production yield: comparison of prediction abilities between response surface methodology (RSM) and adaptive neuro-fuzzy inference system (ANFIS),” Energy, vol. 115, pp. 626-636, 2016.
Q. Wu et al., “Ultrasound-assisted surfactant-enhanced emulsification microextraction for the determination of carbamate pesticides in water samples by high performance liquid chromatography,” J. Chromatogr. A, vol. 1217, no. 11, pp. 1773-1778, 2010.
A. Navickas, E. Puida, A. Bubulis, V. Jurenas, and A. Pauliukas, “Investigation of Oil - Water Ultrasound Emulsifier,” J. Vibroengineering, vol. 1, pp. 35-38, 2013.
H. Imazu and Y. Kojima, “Physical properties and combustion characteristics of emulsion fuels of water/diesel fuel and water/diesel fuel/vegetable oil prepared by ultrasonication,” J. Japan Pet. Inst., vol. 56, no. 1, pp. 52-57, 2013.
Cherng-Yuan Lin and Li-Wei Chen, “Comparison of fuel properties and emission characteristics of two- and three-phase emulsions prepared by ultrasonically vibrating and mechanically homogenizing emulsification methods,” Fuel, vol. 87, no. 10-11, pp. 2154-2161, 2008.
X. Z. and T. J. Yuping Li, Tiejun Wang, Wei Liang, Chuangzhi Wu, Longlong Ma, Qi Zhang, “Ultrasonic Preparation of Emulsions Derived from Aqueous Bio-oil Fraction and 0# Diesel and Combustion Characteristics in Diesel Generator,” Energy Fuels, vol. 24, no. 3, pp. 1987-1995, 2010.
R. N. and Y. M. C Stavarache, M Vinatoru, “Fatty acids methyl esters from vegetable oil by means of ultrasonic energy,” Ultrason. Sonochem., vol. 12, no. 5, pp. 367-375, 2005.
H. Hamidi et al., “The effect of ultrasonic waves on oil viscosity,” Pet. Sci. Technol., vol. 32, no. 19, pp. 2387-2395, 2014.
A. T. Hoang, “Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel,” Energy, 2019.
A. T. Hoang and A. T. Le, “Trilateral correlation of spray characteristics, combustion parameters, and deposit formation in the injector hole of a diesel engine running on preheated Jatropha oil and fossil diesel fuel,” Biofuel Res. J., 2019.
A. T. Hoang and V. V. Pham, “Impact of Jatropha Oil on Engine Performance, Emission Characteristics, Deposit Formation, and Lubricating Oil Degradation,” Combust. Sci. Technol., 2018.
S. Ushakov, H. Valland, J. B. Nielsen, and E. Hennie, “Effects of high sulphur content in marine fuels on particulate matter emission characteristics,” J. Mar. Eng. Technol., vol. 12, no. 3, pp. 30-39, 2013.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).