Next Article in Journal
Tools for Remote Exploration: A Lithium (Li) Dedicated Spectral Library of the Fregeneda–Almendra Aplite–Pegmatite Field
Previous Article in Journal
KazNewsDataset: Single Country Overall Digital Mass Media Publication Corpus
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Data Descriptor

A High-Accuracy GNSS Dataset of Ground Truth Points Collected within Îles-de-Boucherville National Park, Quebec, Canada

Applied Remote Sensing Lab, Department of Geography, McGill University, Montreal, QC H3A-0B9, Canada
*
Author to whom correspondence should be addressed.
Submission received: 5 February 2021 / Revised: 12 March 2021 / Accepted: 12 March 2021 / Published: 14 March 2021
(This article belongs to the Section Spatial Data Science and Digital Earth)

Abstract

:
A new ground truth dataset generated with high-accuracy Global Navigation Satellite Systems (GNSS) positional data of the invasive reed Phragmites australis subsp. australis within Îles-de-Boucherville National Park (Quebec, Canada) is described. The park is one of five study sites for the Canadian Airborne Biodiversity Observatory (CABO) and has stands of invasive P. australis spread throughout the park. Previously, within the context of CABO, no ground truth data had been collected within the park consolidating the locations of P. australis. This dataset was collected to serve as training and validation data for CABO airborne hyperspectral imagery acquired in 2019 to assist with the detection and mapping of P. australis. The locations of the ground truth points were found to be accurate within one pixel of the hyperspectral imagery. Overall, 320 ground truth points were collected, representing 158 locations where P. australis was present and 162 locations where it was absent. Auxiliary data includes field photographs and digitized field notes that provide context for each point.
Dataset License: CC-BY 4.0

1. Summary

Phragmites australis subs. Australis (hereafter Phragmites) is considered one of the most aggressive invasive plant species in eastern North America. It can be found in all 49 of the mainland states in the United States, as well as throughout the southern portions of six Canadian provinces, in a variety of dry and wet soil habitats (both freshwater and brackish conditions) [1,2]. Phragmites is highly aggressive and is considered an indicator of ecosystem disturbance due to its tendency to grow in dense monotypic stands that prevent the growth of other surrounding vegetation, thereby greatly reducing plant biodiversity [3]. These dense monotypic stands can grow up to 3 m tall and have extensive networks of stolons and rhizomes that make removal of the plant difficult, especially once it has spread over a large extent. Phragmites is able to survive under a wide range of conditions, although it has demonstrated an affinity for wetlands, especially those that have been enriched with nitrogen from agricultural or other residential sources [4]. Management and eradication of Phragmites populations is a difficult and ongoing process. Most removal methods require extensive physical labor and field work, over vast areas. Physical methods of removal must be carried out with great caution to avoid accidental transfer of Phragmites or the stimulation of further growth [5,6]. Therefore, it is critical that land managers are able to locate stands of Phragmites while they are still relatively young and small in extent so that they can more easily be eradicated or prevented from spreading using sensible and appropriate methods.
As part of the Canadian Airborne Biodiversity Observatory, airborne hyperspectral imagery (HSI) was acquired with the Compact Airborne Spectrographic Imager-1500 (CASI-1500) over the entire extent of Îles-de-Boucherville National Park in 2019. One of the purposes of the imagery was to identify and map invasive Phragmites across the entire park. For this approach, a ground truth dataset is needed to both train target detection algorithms and assess their resulting accuracies. The airborne HSI is geo-corrected with a resampled pixel size of 2 m × 2 m. The reported positional accuracy of the HSI is an average error in easting and northing of 0.91 m and 0.67 m, respectively (Table 1). However, as described by [7], only 55.5% of the signal from a given pixel originates from materials within its spatial boundaries, while the remaining signal is from the materials within neighboring pixels. For the CASI-1500 HSI, the net point spread function (PSF) extends approximately 3 m in the along-track direction and 2 m in the cross-track direction. Based on the characteristics of the imagery, for this application, ground truth points with less than 2.25 m error in both northing and easting were required. The requirement for precision of the ground truth points had been set to less than one half standard deviation of the net PSF in the cross track (i.e., narrower) direction (16.5 cm). Therefore, ground truth data needed to be collected using a high-precision GNSS (Global Navigation Satellite Systems) instrument, in order to ensure that the points are geolocated correctly within the HSI.

2. Data Description

The dataset available for download is comprised of 320 ground truth data points, as well as digitized field notes and field photographs. The dataset is available as a comma separated value file (.csv) (Figure 1) and as an ESRI shapefile (.shp) with associated metadata. The field notes are available as an Excel workbook (.xlsx) (Figure 2). The field photographs are provided in Portable Network Graphics format (.png) (Figure 3). The ground truth points cover the extent of Îles-de-Boucherville National Park. The positions are reported in the NAD83-CSRS (epoch 2010.01.01) coordinate frame and ellipsoidal height for elevation (see Section 3.2). The user must apply a conversion of the GNSS ellipsoidal height to orthometric height (height above mean sea level) by applying a gravimetric geoid model. The Natural Resources Canada GPS-H tool [8] is recommended for applying the Canadian Geodetic Vertical Datum of 2013 (CGVD2013).
The ground truth dataset contains 15 fields for each of the 320 points collected, and these fields correspond to the fields within the shapefile’s attribute table. The field names and a brief description are given in Table 2. The accompanying field notes file contains auxiliary information about the points collected, and consists of 6 fields for each of the 320 points collected. The field names and a brief description are given in Table 3.

3. Methods

3.1. Study Area

Îles-de-Boucherville National Park is located in the Saint Lawrence River between the Island of Montreal and the municipality of Boucherville in Quebec, Canada (Figure 4). The park covers an area of approximately 8 km2 and consists of five main islands, the largest of which is Île Grosbois (244 ha) [9]. At the end of the 17th century, the first settlers arrived at the islands and began a history of intensive agricultural activity [10], which is still continued today on two of the islands (Île de la Commune and Île Grosbois). The park is characterized by a continental climate, and is relatively flat with an average elevation of 12 m above sea level. Îles-de-Boucherville National Park contains more than 450 plant species in terrestrial, aquatic, and semi-aquatic ecosystems [11]. The majority of the park is covered by young herbaceous and shrub vegetation following the abandonment of several agricultural fields when the area was designated as a protected area by the Quebec Ministry of Forests, Wildlife and Parks in 1984 [9]. Examples include Populus deltoids (eastern cottonwood), Solidago gigantea (giant goldenrod), Solidago altissima (late goldenrod), and Phalaris arundinacea (reed canary grass). Some scattered forested areas are present, with the only mature forest located on Île Grosbois, covering an area of 18 ha [9] and consisting of Fraxinus pennsylvanica (green ash), Tilia Americana (basswood), Acer saccharinum (silver maple), Ulmus americana (American elm), Carya cordiformis (bitternut hickory), and Quercus macrocarpa (bur oak) [11,12]. The invasive common reed Phragmites australis subsp. australis is found throughout the park, within river channels and on riverbanks, along hiking trails, and in agricultural ditches, as Phragmites readily colonizes disturbed ecosystems such as former agricultural fields and farmland [4]. Additionally, the largest stand of invasive Phragmites in the province of Quebec is located in the Courant Channel along the western edge of the park.

3.2. Ground Truth Data Collection

The dataset is comprised of 320 points collected over 6 days between September 5 and 17, 2019 (Figure 5). A Reach RS+ (EMLID, St. Petersburg, Russia) single-band real-time-kinematic (RTK)-capable GNSS receiver was used. It is capable of receiving signals from several satellite constellations, including GPS, GLONASS, Galileo, QZSS, and Beidou. The Reach RS+ was mounted to the top of a fully extended surveying monopole with an attached bubble level to ensure the system would remain stable during data collection. The antenna height was measured as 2.065 m, which includes the height of the surveying monopole (2 m) and the phase center offset, which is the given distance from the bottom of the system housing to the position of the antenna within the housing (0.065 m). The ground truth data points were collected following an established protocol for the unit [13] and utilized incoming corrections from a SmartNet North America (Norcross, GA, USA) base station, located in Longueuil, Quebec (Station QCLO), with a baseline distance that ranged up to 16 km (depending on where in the park collection was taking place at the time). Corrections were received via NTRIP (Networked Transport of Radio Technical Commission for Maritime Services (RCTM) via Internet Protocol) [14] on a RTCM3-iMAX (individualized master-auxiliary) mount point. The RCTM3-iMAX utilizes real reference base stations to send the network corrections, which provides traceability and consistency for incoming corrections received by the GNSS unit [15]. Both GPS and GLONASS constellations with an update rate of 5 Hz were used. The manufacturer reported approximate accuracy of the Reach RS+ with an NTRIP stream baseline of <10 km with a FIX position is 7 mm + 1 mm/km and 1 m for an NTRIP stream baseline <30 km for FLOAT positions [16]. The necessary wireless hotspot was creating using a Novatel Wireless MiFi-7000, and an iPhone Xs running the EMLID Reach application controlled the Reach RS+ rover. In order to respect the Société des établissements de plein air du Québec (SEPAQ) park management team’s request to limit the use of automobiles within the park so that park visitors would not be disturbed, a bicycle was used as the mode of transportation on the roads and trails, with the remainder of the sampling off-trail conducted on foot.
In addition to the ground truth points, detailed field notes were also collected for each sampling point. These field notes included a site photo of the measurement point (along with the appropriate photo ID number), whether invasive Phragmites was present or not, basic site characteristics such as the type(s) of vegetation present, and more detailed notes regarding the location or characteristics of the site. The data underwent quality assessment and any improperly collected points were removed from the dataset, such as duplicate points (due to operator error) or points that reported horizontal standard deviation of 0 m. Ultimately 320 points were retained: 158 points where Phragmites was present and 162 points where Phragmites was absent. The 320 points were distributed over as much of the accessible extent of the park as possible (Figure 5). In order to avoid a bias of points only collected near trails or other easily accessible areas (such as near beaches or parking lots), care was taken to go off-trail into harder-to-reach areas of the park in order to capture the natural variation and distribution of vegetation species. This off-trail sampling was done with permission from the SEPAQ park management team, and no sampling took place in any of the active restoration areas of the park (Figure 5).

3.3. Approximate Positional Accuracy

The Reach RS+ rover internally calculates the position of sample points relative to a continuously updating average position [17]. The deviation from the average position is reported by the unit both on-screen and in the output files as the root mean squared error (RMSE). The RMSE is a measure of the difference between values that are predicted and those that are observed. However, because there is no ‘observed’ known location to which the collected sample point locations are compared, the reported values are the standard deviation. In this dataset, the RMSE field names have been changed to SD to reflect what the values represent.
For this application, we report S D x , S D y , S D z , and the horizontal linear SD in the radial direction ( S D r ) from Equation (1) [18]. These are referred to incorrectly as RMSEx, RMSEy, RMSEz, and RMSEr in the original data files output by the unit.
S D r =   S D x 2 +   S D y 2 ,
The SD are reported in the ground truth dataset file, as well as the attribute table of the shapefile. An approximate horizontal (~ A C C r ) and vertical (~ A C C z ) accuracy were calculated from Equations (2) and (3).
~ A C C r = 1.7308   ×   ( A A r + δ r ) ,
~ A C C z = 1.9600   ×   ( A A z +   δ z ) ,
where 𝛿r is the uncertainty in the radial dimension ( S D r ) and 𝛿z is the uncertainty in the z dimension ( S D z ). Because the SD values represent precision, rather than accuracy compared to a known position, the manufacturer-stated approximate accuracy (AA) of 1 m for baselines < 30 km is adopted here. Equation (2) is modified from the National Standard for Spatial Data Accuracy (NSSDA) horizontal accuracy ( A C C r )   at the 95% confidence level [18]. However, because A C C r as described by [18] is calculated using the error compared to a known position, the NSSDA A C C r could not be determined for this dataset, and an approximate horizontal accuracy at the 95% confidence level is reported. Equation (3) is modified from the ASPRS Accuracy Standards for Digital Geospatial Data, which notes that the vertical error in vegetated terrain does not typically follow a normal distribution [18]. Because A C C z as described by [18] is calculated using the error compared to a known position, the ASPRS A C C z could not be determined for this dataset and an approximate vegetated vertical accuracy at the 95th percentile is reported. The same EMLID Reach RS+ unit with incoming corrections from SmartNet North America via NTRIP had been previously verified for accuracy using a Natural Resources Canada High Precision 3D Geodetic Network station (#95K0003) [19]. The positional accuracy was assessed to be <2.5 cm (x and y) and <3 cm (z) [20].
A brief summary of the average, minimum, maximum, and standard deviation of SD in each dimension, ~ A C C r , and ~ A C C z for all 320 points is given in Table 4. Table 5 and Table 6 contain the average, minimum, and maximum SD in each dimension, ~ A C C r , and ~ A C C z for the ground truth points with a solution status of FIX (143 points) or FLOAT (177 points), respectively. All 320 points had an ~ A C C r   < 2.25 m and a S D r < 16.5 cm, which meet the requirements of the project as determined by the characteristics of the HSI.
All ground truth points had an ~ A C C z ≥ 1 m, and 89.69% of all ground truth points had an ~ A C C z < 2 m. Thirty-three points (10.31%) had an   ~ A C C z ≥ 2 m, but no points had an ~ A C C z   > 3 m. This indicates the vertical data would not be suitable for geospatial mapping projects that require high vertical accuracy, but would be suitable for visualization and projects without high vertical accuracy requirements.
The empirical cumulative distribution functions (CDF) were determined for S D r and ~ A C C r for the full dataset, FLOAT data subset, and FIX data subset, as shown in Figure 6. Additionally, the corresponding frequency distribution histograms are shown within each corresponding CDF plot.

4. Conclusions

A new ground truth dataset containing detailed positional information regarding the presence of invasive Phragmites and other vegetation within Îles-de-Boucherville National Park is described. The dataset was collected using an established protocol and a high-accuracy GNSS system consisting of an EMLID Reach RS+ rover and incoming RTK corrections via internet using the SmartNet North America NTRIP service. The purpose of these data is to provide ground truth for the training and validation of Phragmites target detection using airborne HSI acquired over the extent of the park, in order to map the presence of Phragmites. The precision and approximate accuracy of the dataset were assessed, and were found to meet the requirements of the application (i.e., <16.5 cm for precision and <2.25 m for accuracy), as determined by the characteristics of the HSI (Figure 7). Auxiliary field notes are provided in order to give context to the measured points, and include brief descriptions of the site characteristics as well as corresponding field photographs for visual reference.

5. User Notes

Users should be sure to note the “Solution Status” field of the dataset, as solutions of “FLOAT” and “FIX” may have implications on the overall accuracy of the collected location. While both “FLOAT” and “FIX” solution statuses indicated that base corrections are included and positioning is relative to the determined base coordinates, “FLOAT” means that the integer ambiguity is not resolved, while “FIX” means that the integer ambiguity is resolved. Precision in float mode is typically at the sub-meter level, while precision in fix mode is at the centimeter level. Points collected in dense vegetation, such as standing in a developed Phragmites stand that could measure over 2 m in height, are likely to have lower accuracy. This can be attributed to the fact that such dense vegetation restricted the view of the sky, and therefore restricted the ability of the Reach RS+ to see and acquire sufficient satellites to produce lower errors. To improve the positional accuracy of the ground truth points, a multi-band receiver with incoming corrections over a shorter baseline is recommended. For the Reach RS+ specifically, a local base station (< 10 km baseline) in addition to the incoming NTRIP corrections would be required for higher accuracy.
Due to logistical constraints, it was not possible to remeasure the 320 points in order to recheck them for accuracy. Additionally, there are no previously established geodetic monuments within the park that could serve as a reference point. Because the Reach RS+ unit had been previously assessed for accuracy using a Natural Resources Canada High Precision 3D Geodetic Network station (see Section 3.3), the 320 points were collected in the field with confidence, and their approximate accuracy exceeds the requirements of the project under which they were acquired.
The field note information shown in Figure 2 is in a format that can be joined to the attribute table of the .shp file in a GIS. This would allow the user to have the attribute table contain a complete set of descriptions for each point. There is one missing field photograph for the point FID-265. However, a brief description of the immediate area was noted within the auxiliary field notes file.

Author Contributions

Conceptualization, M.K. and K.E.; methodology, M.K. and K.E.; formal analysis, K.E.; data curation, K.E.; writing—original draft preparation, K.E.; writing—review and editing, M.K. and K.E. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by a Natural Sciences and Engineering Research Council (NSERC) Discovery Frontiers grant that supported the Canadian Airborne Biodiversity Observatory (CABO). Additional funding was provided by the McGill Department of Geography Rathlyn Fellowship in Geography (to Elmer). The APC was funded by an NSERC Discovery Grant (to Kalacska).

Data Availability Statement

The dataset is available for download from http://0-doi-org.brum.beds.ac.uk/10.5281/zenodo.4504922 (accessed on 13 March 2021).

Acknowledgments

We would like to acknowledge the SÉPAQ team at Îles-de-Boucherville National Park, especially Nathalie Rivard, for their logistical support of the data collection campaign. Access to the Planet Scope imagery was provided by the Department of Geography, McGill University. We thank J. Pablo Arroyo-Mora for comments on the manuscript and Deep Inamdar for details about the HSI point spread functions.

Conflicts of Interest

The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript; or in the decision to publish the results.

References

  1. Chambers, R.M.; Meyerson, L.A.; Saltonstall, K. Expansion of Phragmites australis into tidal wetlands of North America. Aquat. Bot. 1999, 64, 261–273. [Google Scholar] [CrossRef]
  2. NOAA Great Lakes Environmental Research Laboratory. Great Lakes Aquatic Nonindigenous Species Information System: Phragmites australis australis (Cav.) Trin. ex Steud. Available online: https://nas.er.usgs.gov/queries/greatlakes/FactSheet.aspx?SpeciesID=2937 (accessed on 8 December 2018).
  3. Saltonstall, K. Cryptic invasion by a non-native genotype of the common reed, Phragmites australis, into North America. Proc. Natl. Acad. Sci. USA 2002, 99, 2445–2449. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  4. Belzile, F.; Labbé, J.; LeBlanc, M.-C.; Lavoie, C. Seeds contribute strongly to the spread of the invasive genotype of the common reed (Phragmites australis). Biol. Invasions 2010, 12, 2243–2250. [Google Scholar] [CrossRef]
  5. Saltonstall, K. Alien Plant Invaders of Natural Areas. Available online: http://www.nps.gov/plants/alien (accessed on 1 April 2019).
  6. Avers, B.; Fahlsing, R.; Kafcas, E.; Schafer, J.; Collin, T.; Esman, L.; Finnell, E.; Lounds, A.; Terry, R.; Hazelman, J. A Guide to the Control and Management of Invasive Phragmites; Michigan Department of Environmental Quality: Lansing, MI, USA, 2007. [Google Scholar]
  7. Inamdar, D.; Kalacska, M.; Leblanc, G.; Arroyo-Mora, J.P. Characterizing and Mitigating Sensor Generated Spatial Correlations in Airborne Hyperspectral Imaging Data. Remote Sens. 2020, 12, 641. [Google Scholar] [CrossRef] [Green Version]
  8. Natural Resources Canada’s Canadian Geodetic Survey (CGS). Geodtic Tools and Applications: GPS-H. Available online: https://www.nrcan.gc.ca/maps-tools-publications/maps/tools-applications/10925#gpsh (accessed on 13 February 2021).
  9. Laliberté, E.; Cogliastro, A.; Bouchard, A. Projet pilote de restauration de paysages forestiers au parc national des îles-de-Boucherville. Rapport Final Présenté à la Direction du Parc National des îles-de-Boucherville, Société des Établissements de Plein Air du Québec (SÉPAQ); Institut de recherche en biologie végétale: Montréal, QC, Canada, 2006. [Google Scholar]
  10. Giroux, L. Synthèse et cartographie du potentiel biophysique et humain du Parc des îlesde-Boucherville; Maîtrise en Sciences de l’environnemen: Montréal, QC, Canada, 1986. [Google Scholar]
  11. SOCIETE des Etablissements de Plein air du Québec. Parc National Des Îles-De-Boucherville: Portait of the park. Available online: https://www.sepaq.com/pq/bou/decouvrir/portrait.dot?language_id=1 (accessed on 17 October 2019).
  12. Ross, M. Étude sur L’évolution de Boisé Grosbois au Parc des Iles-De-Boucherville; Parcs de la Montérégie: Montérégie, Canada, 1990. [Google Scholar]
  13. Kalacska, M. Emlid GPS NTRIP Protocol; Protocols.io: Berkeley, CA, USA, 2018. [Google Scholar] [CrossRef]
  14. Weber, G.; Dettmering, D.; Gebhard, H.; Kalafus, R. Networked transport of RTCM via internet protocol (Ntrip)… IP-Streaming for Real-Time GNSS Applications. In Proceedings of Proceedings of the 18th International Technical Meeting of the Satellite Division of the Institute of Navigation (ION GNSS 2005), Long Beach, CA, USA, 13–16 September 2005; pp. 2243–2247. [Google Scholar]
  15. Leica Geosystems. White Paper: Take it to the MAX! An Introduction to the Philosophy and Technology behind Leica Geosystems’ SpiderNET Revolutionary Network RTK Software and Algorithms; Leica Geosystems AG, Nune: Heerbrugg, Switzerland, 2005. [Google Scholar]
  16. EMLID. Reach RS/RS+ docs: Placing the Base. Available online: https://docs.emlid.com/reachrs/common/tutorials/placing-the-base/ (accessed on 13 February 2021).
  17. Fedorov, E.; RMS? [Discussion Post]. EMLID Community Forum, April 14 2018. Available online: https://community.emlid.com/t/rms/6340/5 (accessed on 25 February 2021).
  18. American Society for Photogrammetry and Remote Sensing (ASPRS). ASPRS Positional Accuracy Standards for Digital GEospactial Data (2014); ASPRS: Bethesda, MD, USA, 2015; pp. A1–A26. [Google Scholar]
  19. Natural Resources Canada. Station Report: 95K0003. Available online: https://webapp.geod.nrcan.gc.ca/geod/data-donnees/station/report-rapport.php?id=95K0003 (accessed on 13 February 2021).
  20. Kalacska, M.; Lucanus, O.; Arroyo-Mora, J.P.; Laliberté, É.; Elmer, K.; Leblanc, G.; Groves, A. Accuracy of 3d landscape reconstruction without ground control points using different uas platforms. Drones 2020, 4, 13. [Google Scholar] [CrossRef] [Green Version]
Figure 1. A subset of the 320 ground truth data points listed in the .csv file. The fields contain the FID, longitude, latitude, elevation, the date and time of the beginning/end of collection, the rover’s solution status, and antenna height above the ground. Additionally, there are fields for the calculated precision (i.e., standard deviation, SD) in the x, y, and z dimensions, as well as the radial standard deviation (SD_r). The approximate horizontal and vertical accuracy at the 95% confidence level is also reported. Antenna height, SD, and approximate accuracy at the 95% confidence level are reported in meters.
Figure 1. A subset of the 320 ground truth data points listed in the .csv file. The fields contain the FID, longitude, latitude, elevation, the date and time of the beginning/end of collection, the rover’s solution status, and antenna height above the ground. Additionally, there are fields for the calculated precision (i.e., standard deviation, SD) in the x, y, and z dimensions, as well as the radial standard deviation (SD_r). The approximate horizontal and vertical accuracy at the 95% confidence level is also reported. Antenna height, SD, and approximate accuracy at the 95% confidence level are reported in meters.
Data 06 00032 g001
Figure 2. A subset of the digitized field notes for the ground truth dataset. For each point collected, there is auxiliary information detailing the survey date, FID, presence/absence of Phragmites, the site characteristics, the corresponding field photograph ID, and any other notes. The full set of digitized field notes is available for download.
Figure 2. A subset of the digitized field notes for the ground truth dataset. For each point collected, there is auxiliary information detailing the survey date, FID, presence/absence of Phragmites, the site characteristics, the corresponding field photograph ID, and any other notes. The full set of digitized field notes is available for download.
Data 06 00032 g002
Figure 3. A subset of the field photographs taken for each measured location. Each photograph has an identifier that corresponds to a specific point’s FID, as well as in the accompanying metadata containing location and copyright information. The full set of photos are available for download.
Figure 3. A subset of the field photographs taken for each measured location. Each photograph has an identifier that corresponds to a specific point’s FID, as well as in the accompanying metadata containing location and copyright information. The full set of photos are available for download.
Data 06 00032 g003
Figure 4. (A) The location of Îles-de-Boucherville National Park (red circle) within the Canadian province of Quebec. Projection: Lambert Conformal Conic Projection, NAD83 (EPSG:102002)). (B) The five major islands that make up the extent of the park, shown in the St. Lawrence River near the Island of Montreal. Basemap is a PlanetScope Dove, image acquired on September 5, 2019. Projection: NAD83(CSRS)v7, EPSG:8254.
Figure 4. (A) The location of Îles-de-Boucherville National Park (red circle) within the Canadian province of Quebec. Projection: Lambert Conformal Conic Projection, NAD83 (EPSG:102002)). (B) The five major islands that make up the extent of the park, shown in the St. Lawrence River near the Island of Montreal. Basemap is a PlanetScope Dove, image acquired on September 5, 2019. Projection: NAD83(CSRS)v7, EPSG:8254.
Data 06 00032 g004
Figure 5. Map of Îles-de-Boucherville National Park showing the 320 ground truth points. Red points indicate no Phragmites was present at the measured location, and green points indicate that Phragmites was present at the measured location. Areas where sampling was restricted due to active restoration efforts (purple) or private land (red) are also shown. Basemap is a PlanetScope Dove, image acquired on 5 September 2019. Projection: NAD83(CSRS)v7, EPSG:8254.
Figure 5. Map of Îles-de-Boucherville National Park showing the 320 ground truth points. Red points indicate no Phragmites was present at the measured location, and green points indicate that Phragmites was present at the measured location. Areas where sampling was restricted due to active restoration efforts (purple) or private land (red) are also shown. Basemap is a PlanetScope Dove, image acquired on 5 September 2019. Projection: NAD83(CSRS)v7, EPSG:8254.
Data 06 00032 g005
Figure 6. The empirical cumulative distribution functions for different subsets of the data. Subsets (A) and (B) are the S D r and ~ A C C r , respectively, for the full dataset of 320 points. Subsets (C) and (D) are the S D r and ~ A C C r , respectively, for the subset of 177 points where the solution status was FLOAT. Subsets (E) and (F) are the S D r and ~ A C C r , respectively, for the subset of 143 points where the solution status was FIX. Each plot also illustrates the frequency distribution histogram for the associated metric.
Figure 6. The empirical cumulative distribution functions for different subsets of the data. Subsets (A) and (B) are the S D r and ~ A C C r , respectively, for the full dataset of 320 points. Subsets (C) and (D) are the S D r and ~ A C C r , respectively, for the subset of 177 points where the solution status was FLOAT. Subsets (E) and (F) are the S D r and ~ A C C r , respectively, for the subset of 143 points where the solution status was FIX. Each plot also illustrates the frequency distribution histogram for the associated metric.
Data 06 00032 g006
Figure 7. (A) A mosaic of the four CASI-1500 flight lines acquired over Îles-de-Boucherville National Park on July 8, 2019 (Projection: NAD83(CSRS)v7, EPSG:8254). The HSI are displayed as a true color RGB composite: 650 nm/548 nm/442 nm. The red rectangle shows the location of subset (B), which illustrates the appearance of Phragmites stands in the HSI (red arrows) and the location, as an example, of one of the ground truth points (FID 201) collected within a Phragmites stand. (C) shows a closeup of the HSI with individual pixels visible, and a 2.25 m buffer drawn around FID 201 to demonstrate that all pixels within the buffer are part of the Phragmites stand. (D) shows the corresponding field photograph for FID 201 to give context to the measured location.
Figure 7. (A) A mosaic of the four CASI-1500 flight lines acquired over Îles-de-Boucherville National Park on July 8, 2019 (Projection: NAD83(CSRS)v7, EPSG:8254). The HSI are displayed as a true color RGB composite: 650 nm/548 nm/442 nm. The red rectangle shows the location of subset (B), which illustrates the appearance of Phragmites stands in the HSI (red arrows) and the location, as an example, of one of the ground truth points (FID 201) collected within a Phragmites stand. (C) shows a closeup of the HSI with individual pixels visible, and a 2.25 m buffer drawn around FID 201 to demonstrate that all pixels within the buffer are part of the Phragmites stand. (D) shows the corresponding field photograph for FID 201 to give context to the measured location.
Data 06 00032 g007
Table 1. The reported mean and standard deviation in positional accuracy of the CASI-1500 HSI acquired over Îles-de-Boucherville National Park in 2019.
Table 1. The reported mean and standard deviation in positional accuracy of the CASI-1500 HSI acquired over Îles-de-Boucherville National Park in 2019.
EastingNorthing
Mean error (m)0.910.67
Standard deviation (m)±0.98±0.56
Table 2. A list and descriptions of the fields in the ground truth dataset.
Table 2. A list and descriptions of the fields in the ground truth dataset.
Field NameDescription
FIDThe point’s numerical identifier (ObjectID of the ESRI shapefile)
longitudeThe measured longitude of the point
latitudeThe measured latitude of the point
elevationThe measured elevation of the point (ellipsoidal height)
collection_startThe date and time that collection of the point began
collection_endThe date and time that collection of the point ended
solution_statusThe solution status at the time the point was collected
antenna_heightThe height of the antenna above the ground (m)
sample_countThe number of measurements that were used in the calculation of the position
SD_r *The radial standard deviation (m)
SD_x *The standard deviation in the x dimension (m)
SD_y *The standard deviation in the y dimension (m)
SD_z *The standard deviation in the z dimension (m)
ACC_rThe approximate horizontal accuracy at the 95% confidence level (m)
ACC_zThe approximate vertical accuracy at the 95% confidence level (m)
* See Section 3.3 for a discussion on the SD fields as reported by the Reach RS+ unit.
Table 3. A list and descriptions of the fields in the auxiliary field notes file.
Table 3. A list and descriptions of the fields in the auxiliary field notes file.
Field NameDescription
GPS Survey DateThe date that the points were collected
FIDThe point’s numerical identifier (ObjectID of the ESRI shapefile)
Phrag? (Y/N)“Y” for “yes” or “N” for “no”, representing whether Phragmites was present at the specified point
Site CharacteristicsA brief description of the immediate area surrounding the measured point
Photo IDThe identifier for the corresponding field photograph
Other notesAny other notes/comments regarding the measured point, surrounding area, or other characteristics
Table 4. The average, minimum, maximum, and standard deviation of the precision and the approximate A C C r and A C C z   calculated for the entire set of 320 points, reported in centimeters.
Table 4. The average, minimum, maximum, and standard deviation of the precision and the approximate A C C r and A C C z   calculated for the entire set of 320 points, reported in centimeters.
MetricAverageStandard DeviationMinimumMaximum
S D r 0.800.680.129.21
S D x 0.530.590.018.44
S D y 0.530.430.043.69
~ A C C r 174.461.17173.28189.02
~ A C C z 198.094.47196.13268.48
Table 5. The average, minimum, maximum, and standard deviation of the precision and the approximate A C C r and A C C z   calculated for the subset of 143 points with a solution status as FIX, reported in centimeters.
Table 5. The average, minimum, maximum, and standard deviation of the precision and the approximate A C C r and A C C z   calculated for the subset of 143 points with a solution status as FIX, reported in centimeters.
MetricAverageStandard DeviationMinimumMaximum
S D r 0.540.790.139.21
S D x 0.370.720.068.44
S D y 0.360.360.043.69
~ A C C r 174.021.37173.31189.02
~ A C C z 197.436.24196.27268.48
Table 6. The average, minimum, maximum, and standard deviation of the precision and the approximate A C C r and A C C z   calculated for the subset of 177 points with a solution status as FLOAT, reported in centimeters.
Table 6. The average, minimum, maximum, and standard deviation of the precision and the approximate A C C r and A C C z   calculated for the subset of 177 points with a solution status as FLOAT, reported in centimeters.
MetricAverageStandard DeviationMinimumMaximum
S D r 1.010.480.122.84
S D x 0.660.400.011.85
S D y 0.670.440.092.74
~ A C C r 174.820.82173.28177.99
~ A C C z 198.632.02196.13206.76
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Elmer, K.; Kalacska, M. A High-Accuracy GNSS Dataset of Ground Truth Points Collected within Îles-de-Boucherville National Park, Quebec, Canada. Data 2021, 6, 32. https://0-doi-org.brum.beds.ac.uk/10.3390/data6030032

AMA Style

Elmer K, Kalacska M. A High-Accuracy GNSS Dataset of Ground Truth Points Collected within Îles-de-Boucherville National Park, Quebec, Canada. Data. 2021; 6(3):32. https://0-doi-org.brum.beds.ac.uk/10.3390/data6030032

Chicago/Turabian Style

Elmer, Kathryn, and Margaret Kalacska. 2021. "A High-Accuracy GNSS Dataset of Ground Truth Points Collected within Îles-de-Boucherville National Park, Quebec, Canada" Data 6, no. 3: 32. https://0-doi-org.brum.beds.ac.uk/10.3390/data6030032

Article Metrics

Back to TopTop