Next Article in Journal
On Training Neural Network Decoders of Rate Compatible Polar Codes via Transfer Learning
Next Article in Special Issue
Investigation of Forced Convection Enhancement and Entropy Generation of Nanofluid Flow through a Corrugated Minichannel Filled with a Porous Media
Previous Article in Journal
Using the Information Provided by Forbidden Ordinal Patterns in Permutation Entropy to Reinforce Time Series Discrimination Capabilities
Previous Article in Special Issue
Radiative MHD Nanofluid Flow over a Moving Thin Needle with Entropy Generation in a Porous Medium with Dust Particles and Hall Current
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Aspects of Chemical Entropy Generation in Flow of Casson Nanofluid between Radiative Stretching Disks

1
Department of Mathematics, The Islamia University of Bahawalpur, Bahawalpur 63100, Pakistan
2
Department of Mathematics, The Government Sadiq College Women University, Bahawalpur 63100, Pakistan
3
Industrial Engineering Department, The University of Jordan, Amman 11942, Jordan
4
Department of Mathematics, COMSATS University Islamabad, Sahiwal 57000, Pakistan
5
Institute of Research and Development, Duy Tan University, Da Nang 550000, Vietnam
6
Faculty of Medicine, Duy Tan University, Da Nang 550000, Vietnam
7
Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City 758307, Vietnam
8
Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City 758307, Vietnam
*
Author to whom correspondence should be addressed.
Submission received: 22 March 2020 / Revised: 19 April 2020 / Accepted: 20 April 2020 / Published: 25 April 2020
(This article belongs to the Special Issue Thermal Radiation and Entropy Analysis)

Abstract

:
The appropriate utilization of entropy generation may provoke dipping losses in the available energy of nanofluid flow. The effects of chemical entropy generation in axisymmetric flow of Casson nanofluid between radiative stretching disks in the presence of thermal radiation, chemical reaction, and heat absorption/generation features have been mathematically modeled and simulated via interaction of slip boundary conditions. Shooting method has been employed to numerically solve dimensionless form of the governing equations, including expressions referring to entropy generation. The impacts of the physical parameters on fluid velocity components, temperature and concentration profiles, and entropy generation number are presented. Simulation results revealed that axial component of velocity decreases with variation of Casson fluid parameter. A declining variation in Bejan number was noticed with increment of Casson fluid constant. Moreover, a progressive variation in Bejan number resulted due to the impact of Prandtl number and stretching ratio constant.

1. Introduction

Engineering systems’ efficiency decreases in the presence of irreversibilities. Heat transfer and fluid flow are irreversible processes and their irreversibility may be articulated in terms of entropy generation. Since rotating disks associated with non-Newtonian fluid flow and heat transfer have many important applications, such as in liquid-metal pumping, rotor-stator systems, oil recovery, hydraulic presses, centrifugal machinery, various electronic disks, shrouded-disk rotation, rotating motors, boilers, and plastic films and artificial fibers, they have received increasing attention over the last decade.
Gorder et al. [1] studied viscous fluid flow between stretching disks. Soid et al. [2] numerically analyzed the heat transfer characteristics induced by shrinking and stretching disks under the influence of magnetic field. Yin et al. [3] focused on the flow of nanofluid in rotating disks which radially stretched with uniform stretching rate. Another numerical investigation regarding nanofluid fluid configured by rotating disks was conducted by Sheikholeslami et al. [4]. Hashmi et al. [5] developed a mathematical model for Oldroyd-B confined by isothermal stretching disks, additionally featuring mixed convection and chemical reaction consequences. The radiative thermal analysis of Oldroyd-B fluid induced by two stretchable disks was securitized by Khan et al. [6]. Khan et al. [7] performed analytical computations for Maxwell fluid flow between stretching disks in the presence of a chemical reaction.
Heating and/or cooling processes are encountered in almost every industrial system. Traditional heat transfer fluids have low thermal conductivity that seize their performance and put constraints on not only system compactness but also operational limits. The phenomenal thermal conductivity of nanofluids inherited from high thermal conductivity of tiny sized metallic particles suspended in the base fluid (such as water, oil, ethanol, and glycol), referred to as nanoparticles, drives their aggressive spread in industrial applications. The fundamental work on nanofluid was reported experimentally by Choi [8]. To analyze the slip mechanism of nanofluid, Buongiorno [9] introduced a mathematical model involving thermophoresis and Brownian motion effects. Ghadikolaei et al. [10] examined the Joule heating and nonlinear thermal radiation prospective in Casson nanofluid induced by stretched geometry. Khan and Shehzad [11] determined the thermophoretic aspects of nanofluid in third grade nano-material using a convergent technique. Alwatban et al. [12] interpreted the role of Wu’s slip in Eyring Powell nanofluid with additional impact of activation energy. A flow model regarding bioconvection of Oldroyd-B nanoliquid in existence of activation energy generated by stretched cylinder was suggested by Tlili and co-workers [13]. Waqas et al. [14] reported some biofuels application associated with the flow of nanoparticles in presence of gyrotactic microorganisms. They used a second grade viscoelastic nanofluid model where the numerical solution had been calculated via built-in bvp4c algorithm. A nanofluid study of third grade fluid flow with the impact of thermal radiation, viscous dissipation, and slip consequences was explored by Abdelmalek et al. [15]. Eid et al. [16] carried out electromagnetic features in blood flow carbon nanotubes in a porous circular cylinder. The rheological features of Cassonnanofluid in presence of activation energy has been analyzed by Shah et al. [17]. Eid [18] investigated the flow of Siskonanofluid induced by a convectively heated surface. The thermal aspects of MnFe2O4nanoparticles immersed in non-Newtonian fluid were suggested by Shaw et al. [19]. Sheremet et al. [20] utilized the significance of nanoparticles in cavity where corner and top walls are assumed to be heated. In another useful contribution, Sheremet and Pop [21] implemented the famous LTNE and Buongiorno’s models while examining the local heater size and position effects configured a porous cavity. The entropy generation and thermal aspects of TiO2 nanoparticles for flow of micropolar in a porous medium were examined numerically by Zaib et al. [22]. Sheikholeslami et al. [23] studied the significance of nanoparticles for convective flow in porous chambers additionally impacted with thermal radiation and magnetic force. Another investigation based on utilization of nano-materials in a baffled U-shaped enclosure was numerically simulated by Ma et al. [24]. The impact of Lorentz force in porous annulus in presence of CuO-H2O nanofluid was investigated by Sheikholeslamiet al. [25]. Bondarenko et al. [26] reported thermal features of Al2O3/H2O nano-material in a cavity with a feature of heat-generating element. Selimefendigil et al. [27] analyzed the pulsating flow of ferrofluid with appliance of mixed convection features. Some further investigation deals with applications of nano-materials, which can be seen in references [28,29,30,31].
The thermodynamic optimization of various thermal engineering processes has improvement of the sustainability and efficiency of emerging technologies in recent decades. Various thermal extrusion systems and heat transportation mechanisms are designed based on the laws of thermodynamics. According to the first law of thermodynamics, energy can be transformed within different systems or mediums instead of being lost. However, this law fails to justify the irreversibilities (entropy generation). On the other hand, the second thermodynamics law itemizes the collection and available energy consumption and reduces the energy loss, and subsequently improves the fundamental thermal efficiency of the heat transportation system. Abolbashari et al. [32] examined the entropy generation aspects in unsteady nanofluid flow coffered by a moving surface. Kumar et al. [33] evaluated the effects of entropy generation for the flow of viscoelastic nano-material under the influence of transient convective dissipation. Another numerical investigation for determination of entropy generation for nanofluid has been explored by Rana et al. [34]. Aghakhani et al. [35] worked on the thermal aspects for natural convective flow alumina/water nanoparticles in presence of entropy generation features. Seyyedi et al. [36] examined the magnetic field and entropy generation impact to examine the heat transfer analysis in L-shaped enclosures. Salimi et al. [37] incorporated the features of entropy generation and heat sink for 3D jet flow under the assumptions of local thermal non-equilibrium constraints. The flow of chemically reactive non-Newtonian liquid due to stretched surface in presence of entropy generation phenomenon was recently considered by Khan et al. [38]. Mustafa [39] investigated slip effects in nanofluid flow induced by a rotating disk. Arikoglu et al. [40] investigated the entropy generation features in slip flow of viscous fluid due to rotating disk.
Recently, special interest has developed towards the flow of nanoparticles because of their diverse industrial and commercial applications, like energy generation, improvement of the thermal extrusion phenomenon, development of manufacturing processes, etc. In addition to this, the consumption of available energy and reduced energy loss is another novel aspect useful in various engineering applications and other industries to improve the thermal efficiency of systems. The utilization of entropy generation enables the minimization of available energy loss of performance systems. Keeping such motivations in mind, the present investigation presents the effects of entropy generation in flow of Casson nanofluid induced by stretching disks.
After carefully examining the above cited work, we note that entropy generation features in thermally developed flow of Casson nanofluid induced by two porous stretching disks have not been reported yet. Therefore, the current analysis aims to fill this gap. Additionally, the interesting features of magnetic field, heat absorption/generation and chemical reaction are also incorporated. The present research is an extension of that of Arikoglu et al. [40]. It integrated the Casson nanofluid model. Also, the novel features of thermal radiation, heat source/sink, and chemical reaction are incorporated. The analysis has been performed over porous stretching disks in contrast to simple stretching disks, which addresses modern engineering applications in the fields of material engineering, biomedical separation devices, petroleum engineering, distillation towers, jet engines, and atmospheric flows. The governing equations for current flow situations are constituted and tackled by employing the famous numerical shooting technique. Different flow parameters are graphically impacted with relevant physical significant.

2. Mathematical Analysis

In order to model the equations for flow analysis, we consider a steady two-dimensional axisymmetric flow of an incompressible, electrically conducting Casson nanofluid between two stretchable disks. The magnetic field effects with magnetic field strength B 0 are applied vertically to the surface shown in Figure 1. Here ( u ,   v ,   w ) and ( r ,     θ ,     z ) are assumed to be velocity components and cylindrical coordinates. The flow is described in cylindrical coordinates ( r ,   θ ,     z ) where z is chosen as the perpendicular axis. The lower disk is static at the plane z = 0 . The governing equations for current flow problem are [1,5,6,7];
u r + u r + w z = 0 ,
u u r + w u z = 1 ρ p r + ν ( 1 + β β ) ( 2 u r 2 + 1 r u r u r 2 + 2 u z 2 ) σ B 0 2 ρ u ν u k ,
u w r + w w z = 1 ρ p z + ν ( 1 + β β ) ( 2 w r 2 + 1 r w r + 2 w z 2 ) ,
u T r + w T z = α ( 2 T r 2 + 1 r T r + 2 T z 2 ) + τ [ D B ( C r T r + C z T z ) + D T T m { ( T r ) 2 + ( T r ) 2 } ] 1 ρ c p q r z + Q 0 ρ c p ( T T 1 ) ,
u C r + w C z = D B ( 2 C r 2 + 1 r C r + 2 C z 2 ) + D T T m ( 2 T r 2 + 1 r T r + 2 T z 2 ) k 0 ( C C 1 ) ,
For Equations ( 1 ) ( 5 ) , the slip boundary conditions are developed as:
u = a r + b 1 u z ,                 w = 0 ,                 P = a μ B r 2 4 d 2 ,                 a t     z = 0 ,
u = c r b 2 u z ,                 w = 0 ,                 p = 0 ,                                 a t   z = d ,
T = T 0 ,                 a t         z = 0 ,                 T = T 1 ,                 a t   z = d ,
C = C 1 , a t         z = 0 , C = C 2 , a t       z = d .
where µ isthe dynamic viscosity, ρ denotes density, β is the parameter of Casson fluid, p is the pressure, σ is the electrical conductivity, B 0 is the magnetic field strength, k is the permeability of porous medium, T is the temperature, C is the concentration, α is the thermal diffusivity, c p reflects the specific heat at constant pressure, Q 0 is the heat generation parameter, D T is the thermophoretic diffusion coefficient, D B is the Brownian diffusion coefficient, τ is the ratio of heat capacity, k 0 is the reaction constant, T m is the mean temperature, while N b is the Brownian motion coefficient. In view of Rossel and approximation, the radiative heat flux ( q r ) is written as:
q r = 4 3 σ * k * T 4 z ,
where k * is the coefficient of Rossel and mean absorption, σ * is the constant of Stefan–Boltzmann. By expanding T 4 about free stream temperature T 0 as follows:
T 4 = T 0 3 + 4 T 0 3 ( T T 0 ) + 6 ( T T 0 2 ) + ,
For further analysis, the temperature gradient within the flow is assumed to be small and subsequently the higher order terms can be ignored i.e.,
T 4 = 4 T 0 3 ( T T 0 ) ,
By using Equation ( 9 ) in Equation ( 7 ) , we have
q r = 16 3 σ * k * T 3 T z .
Now let us introduce similarity transforms as follows [5,6,7]:
u = a r H ( η ) , w = a d H ( η ) , η = z d ,
P = a μ ( P ( η ) + β r 2 4 d 2 ) , θ ( η ) = T T 0 T 1 T 0 , ( η ) = C C 0 C 1 C 0 .
By using similarity transforms in Equations ( 1 )   to   ( 5 ) , the following transformed governing equations are obtained
( 1 + β β ) H R e ( H 2 + H H ) R e ( M + S ) H = 0 ,
( 1 + 4 3 R d ) θ R e P r H θ + P r λ θ + N b P r θ = 0 ,
P r L e R e H + N t N b θ P r L e R e K 1 = 0 ,
P = ( 1 + β β ) H R e H H ,
H ( 0 ) = 0 ,   H ( 1 ) = 0 ,   P ( 0 ) = 0 ,
H ( 0 ) = 2 + λ 1 H ( 0 ) ,         H ( 1 ) = 2 λ 2 H ( 1 ) ,
θ ( 0 ) = 0 ,         θ ( 1 ) = 1 , ( 0 ) = 0 ,                         ( 1 ) = 1 ,
where the dimensionless parameters are defined as
λ = Q d 2 ν , R d = K K * 4 σ * T 3 , P r = ν α   , L e = α D B , M = σ B 0 2 ρ a , R e = a d 2 ν ,
N b = τ D B ( C 2 C 1 ν ) ,   N t = τ D T T m ( T 2 T 1 ν ) ,   λ 1 = b 1 d ,   λ 2 = b 2 d ,   S = ν k a ,   K 1 = k 0 a .
In the above expression, γ is stretching ratio, λ is heat source parameter, R d is thermal radiation parameter, R e is Reynolds number, P r is Prandtl number, L e is the Lewis number, M is parameter of magnetic, N b is parameter of Brownian motion, D B is Brownian diffusion parameter, N t is thermophoretic parameter, λ 1 and λ 2 are slip lengths, S is porosity parameter, and D T is thermophoresis diffusion coefficient.

3. Entropy Generation Equation

The expressions for local entropy generation volumetric rate for Casson nanofluid are given by
S G = K T 0 2 [ T ] 2 + μ T 0 ( 1 + β β ) Φ + μ c 1 ( C z ) 2 + μ c 1 ( T z ) ( C z ) + σ B 0 2 T 0 u 2 + μ K T 0 u 2 ,
where μ and K are the viscosity and thermal conductivity, T 0 is the reference temperature, and Φ is the viscous dissipation. In Equation ( 17 ) , the term Φ can be written as:
Φ = 2 [ ( u r ) 2 + u 2 r 2 + ( w z ) 2 ] + 1 r 2 ( w θ ) 2 + ( u z ) 2 + 1 r 2 ( w θ ) 2 .
Using Equation   ( 18 ) in Equation   ( 17 ) yields
S G = K T 0 2 ( T Z ) 2 + μ T 0 ( 1 + β β ) { 2 [ ( u r ) 2 + u 2 r 2 + ( w z ) 2 ] + 1 r 2 ( w θ ) 2 + ( u z ) 2 + 1 r 2 ( w θ ) 2 } + μ C 1 ( C z ) 2 + μ C 1 ( T z ) ( C z ) + σ B 0 2 T 0 u 2 + μ K T 0 u 2 ,
The characteristics entropy generation is defined as
S G 0 = k ( T 1 T 0 ) d 2 T 0 ,
After inserting Equation   ( 11 ) into Equation   ( 17 ) , the following equation for entropy generation number will be obtained
N G = α θ 2 + B r { ( 1 + β β ) ( 3 δ 2 H 2 + H 2 ) 1 4 R e ( M + S ) H 2 } + λ 3 ϵ α 2 2 + λ 4 ϵ θ ,
where
B r = P r E c ,     E c = a 2 r 2 C p ( T 1 T 0 ) , ϵ = C 2 C 1 C 1 , λ 3 = μ c 1 k , λ 4 = μ T 0 k , δ = r d .
In the above expression, B r is the Brinkman number and E c is the Eckert number. The Bejan number B e is another alternative irreversibility distribution parameter. This is the ratio between entropy generations due to heat transfer to the total entropy generations. In a dimensionless form, Bejan number is given as follows:
B e = E n t r o p y   g e n e r a t i o n   d u e   t o   h e a t   t r a n s f e r   T o t a l   e n t r o p y   g e n e r a t i o n ,
B e = α θ 2 α θ 2 + B r { ( 1 + β β ) ( 3 δ 2 H 2 + H 2 ) 1 4 R e ( M + S ) H 2 } .

4. Results and Discussion

The system of Equations (12)–(14), along with boundary conditions, Equation (16), has been solved numerically by employing the shooting method. The results are validated by comparing present numerical values with those generated by Mustafa [39], and presented in Table 1. A convincible accuracy of results has been found between both studies. In this section, physical explanation of flow parameters, like the stretching ratio γ, Reynold number, Reynold number R e , Prandtl number P r , magnetic parameter M , thermophoretic parameter N t , thermal radiation parameter R d , Lewis number L e , and Brownian motion parameter N b , is presented graphically. Each parameter is varied while other parameters are kept constant, i.e., M = 1 ,   β = 0.1 ,   γ = 0.3 , S = 0.5 , N t = 0.5 , λ = 0.5 , L e = 1.5 ,   N b = 0.7 ,   K 1 = 0.3 , and P r = 0.5 .
Figure 2, Figure 3, Figure 4, Figure 5, Figure 6 and Figure 7 show the influence of porosity parameter, magnetic parameter, and Casson fluid constant on axial velocity component H ( η ) and radial velocity component H ( η ) . In Figure 2 and Figure 3, velocity profiles increase for rising values of porosity parameter S . The physical justification of such an increasing trend may be attributed to the involvement of the permeability of the porous medium. Figure 4 shows that the axial velocity component is a growing function of magnetic parameter M . It is seen that the thickness of thermal boundary layer surges with the implementation of magnetic field. Figure 5 shows that radial velocity component is decreasing function of magnetic parameter due to stretching disks. Physically, a change in magnetic number is associated with the Lorentz force, which is of resistive nature and subsequently decreases the nanoparticles’ velocity. Figure 6 and Figure 7 show that increment of Casson fluid parameter β leads to a progressive velocity distribution. The physical aspect of such trend is due to involvement of yield stress which is associated with Casson fluid parameter β . The graphical explanations presented in Figure 8 and Figure 9 reveal that the axial and radial velocity component increases by varying stretching ratio γ .
Figure 10, Figure 11, Figure 12 and Figure 13 show the influence of Prandtl number P r , thermophoretic parameter N t , and heat source/sink parameter λ on temperature profiles θ ( η ) . Figure 10 shows a declining temperature distribution θ for apparent values of Prandtl number P r . Such a decline in temperature profile due to peak values of Prandtl number is due toa weaker thermal diffusivity. Therefore, proper values of Prandtl number play a frequent role in controlling the heating and cooling processes. Figure 11 depicts the consequence of thermophoretic parameter N t on θ . The thermophoresis phenomenon has a significant contribution in many industries. The thermophoresis is a migration process of heated fluid particles towards the cold region, due to which the temperature increases. From Figure 12, an increasing temperature profile is resulted for heat source parameter ( λ > 0 ) . However, for heat sink case ( λ < 0 ) , opposite observations are obtained. Physically, an improved temperature due to heat source is associated with addition of heat to the system. However, for the heat sink case, heat is removed from the system which reduces the temperature.
Figure 14, Figure 15, Figure 16 and Figure 17 predict the influence of the Lewis number L e , thermophoretic parameter N t , Brownian motion parameter N b , and reaction parameter K 1 on concentration profiles ϕ ( η ) . Figure 14 and Figure 15 show that concentration profiles increase with the increase in L e and N t . Physically, the Lewis number is associated with the mass diffusion coefficient. The higher variation in Lewis number corresponds to low mass diffusion which declines the concentration of nanoparticles. Figure 16 and Figure 17 show decreasing behavior of concentration profile by increasing the value of Brownian motion parameter N b and chemical reaction parameter K 1 .The Brownian constant N b occupies a reverse relation with dimensionless concentration Equation (14), which means that the maximum values assigned to N b retarded the concentration distribution.Figure 18 and Figure 19 aim to report the influence of Casson fluid parameter β and stretching ratio constant γ on entropy generation number N G . Figure 18 revealed that an improved total entropy generation distribution is examined when Casson fluid parameters get maximum values. Figure 19 examined that entropy generation rates decrease the function of stretching ratio constant γ .
Figure 20is sketched to observe the impact of Prandtl number P r   on entropy generation number N G . The curve of entropy generation distribution N G attained a maximum level due to maximum values of P r . The significance of Casson fluid parameter β , stretching ratio γ , and Prandtl number P r on Bejan number B e are investigated in Figure 21, Figure 22 and Figure 23. Figure 21 shows that Bejan number B e decreases with β . Figure 22 and Figure 23 elucidate that the Bejan number B e increases with stretching ratio constant γ and P r . The Bejan number is a very important dimensionless number in the entropy generation which reflects the ratio between entropy generations associated with heat transfer to total entropy generation. Usually, the Bejan number reveals numerical values between 0 and 1.In the case that the Bejan number assigns a value close to 1, it means that entropy generation associated with heat transfer is more dominant. To increase the cooling system in the flow of conducting liquids, the Prandtl number can be utilized appropriately.

5. Concluding Remarks

  • It is noted that the porosity parameter, Casson fluid, and stretching ratio parameter upsurge the radial velocity component.
  • The radial component of velocities is increased due to the variation of the porosity parameter and Casson fluid parameter, while the impact of magnetic parameter is reverse.
  • Temperature profiles increase for thermophoretic and heat source parameters.
  • A declining nanoparticles temperature results from the Prandtl number and heat sink parameter.
  • Concentration profile shows increasing behavior for the Lewis number and thermophoretic parameter.
  • Increasing values of the stretching ratio and Prandtl number increase the Bejan number, while reverse behavior is observed for the Casson fluid parameter.
  • The observations from current analysis can be useful in thermal energy exchange processes, cooling processes, energy consumptions, thermodynamics applications, aircrafts, thermal extrusion systems etc.

Author Contributions

For research articles, N.K. formulated the flow problem, I.R. computed the analytical solution, M.S.H. performed the literature survey, S.A.M. helps in revision, S.U.K. analyzed the results, Z.A. improved the English language and I.T. help in drafting and confirming the simulations and results. All authors have read and agreed to the published version of the manuscript

Funding

This research received no external funding.

Acknowledgments

Authors are grateful to reviewers and editor for nice suggestions.

Conflicts of Interest

The authors declare no conflict of interest.

Nomenclature

B 0 magnetic field strength β Casson fluid parameter
µ , dynamic viscosity p pressure
ρ density σ electrical conductivity
k permeability of porous medium T temperature
α thermal diffusivity c p specific heat
Q 0 heat generation parameter D T thermophoretic diffusion coefficient
D B Brownian diffusion coefficient τ ratio of heat capacity
k 0 reaction constant T m mean temperature
N b Brownian motion parameter k * coefficient of Rosseland mean absorption
σ * constant of Stefan-Boltzmann γ is stretching ratio
λ heat source parameter R d thermal radiation parameter
R e Reynolds number P r Prandtl number
L e Lewis number. M parameter of magnetic
N b Brownian motion parameter D B Brownian diffusion parameter
N t thermophoretic parameter ( λ 1 , λ 2 ) slip lengths
S porosity parameter D T thermophoresis diffusion coefficient
K are thermal conductivity, T 0 reference temperature
Φ viscous dissipation

References

  1. Van Gorder, R.A.; Sweet, E.; Vajravelu, K. Analytical solutions of a coupled nonlinear system arising in a flow between stretching disks. Appl. Math. Comput. 2010, 216, 1513–1523. [Google Scholar] [CrossRef]
  2. Soid, S.K.; Ishak, A.; Pop, I. MHD flow and heat transfer over a radially stretching/shrinking disk. Chin. J. Phys. 2018, 56, 58–66. [Google Scholar] [CrossRef]
  3. Yin, C.; Zheng, L.; Zhang, C.; Zhang, X. Flow and heat transfer of nanofluids over a rotating disk with uniform stretching rate in the radial direction. Propuls. Power Res. 2017, 6, 25–30. [Google Scholar] [CrossRef]
  4. Sheikholeslami, M.; Hatami, M.; Ganji, D.D. Nanofluid flowand heat transfer due to rotating disk. J. Mol. Liq. 2014, 190, 112–120. [Google Scholar] [CrossRef]
  5. Hashmi, M.; Khan, N.; Khan, S.U.; Rashidi, M.M. A mathematical model for mixed convective flow of chemically reactive Oldroyd-B fluid between isothermal stretching disks. Results Phys. 2017, 7, 3016–3023. [Google Scholar] [CrossRef]
  6. Khan, N.; Mahmood, T. Thermophoresis particle deposition and internal heat generation on MHD flow of an Oldroyd-B nanofluid between radiative stretching disks. J. Mol. Liq. 2016, 216, 571–582. [Google Scholar] [CrossRef]
  7. Khan, N.; Hashmi, M.S.; Khan, S.U.; Syed, W.A. Study of polymeric liquid between stretching disks with chemical reaction. J. Braz. Soc. Mech. Sci. Eng. 2018, 40, 102. [Google Scholar] [CrossRef]
  8. Choi, S.U.S. Enhancing thermal conductivity of fluids with nanoparticles. ASME Pub. Fed. 1995, 231, 99–106. [Google Scholar]
  9. Buongiorno, J. Convective Transport in Nanofluids. J. Heat Transf. 2006, 128, 240–250. [Google Scholar] [CrossRef]
  10. Ghadikolaei, S.; Ganji, D.D.; Ganji, D.; Jafari, B. Nonlinear thermal radiation effect on magneto Casson nanofluid flow with Joule heating effect over an inclined porous stretching sheet. Case Stud. Therm. Eng. 2018, 12, 176–187. [Google Scholar] [CrossRef]
  11. Khan, S.U.; Shehzad, S.A. Brownian movement and thermophoretic aspects in third grade nanofluid over oscillatory moving sheet. Phys. Scr. 2019, 94, 095202. [Google Scholar] [CrossRef]
  12. Alwatban, A.; Khan, S.U.; Waqas, H.; Tlili, I. Interaction of Wu’s Slip Features in Bioconvection of Eyring Powell Nanoparticles with Activation Energy. Process 2019, 7, 859. [Google Scholar] [CrossRef] [Green Version]
  13. Tlili, I.; Waqas, H.; Almaneea, A.; Khan, S.U.; Imran, M. Activation Energy and Second Order Slip in Bioconvection of Oldroyd-B Nanofluid over a Stretching Cylinder: A Proposed Mathematical Model. Process 2019, 7, 914. [Google Scholar] [CrossRef] [Green Version]
  14. Waqas, H.; Khan, S.U.; Tlili, I.; Awais, M.; Shadloo, M.S. Significance of Bioconvective and Thermally Dissipation Flow of Viscoelastic Nanoparticles with Activation Energy Features: Novel Biofuels Significance. Symmetry 2020, 12, 214. [Google Scholar] [CrossRef] [Green Version]
  15. Abdelmalek, Z.; Khan, S.U.; Waqas, H.; A Nabwey, H.; Tlili, I. Utilization of Second Order Slip, Activation Energy and Viscous Dissipation Consequences in Thermally Developed Flow of Third Grade Nanofluid with Gyrotactic Microorganisms. Symmetry 2020, 12, 309. [Google Scholar] [CrossRef] [Green Version]
  16. Eid, M.R.; Al-Hossainy, A.F.; Zoromba, M.S. FEM for Blood-Based SWCNTs Flow through a Circular Cylinder in a Porous Medium with Electromagnetic Radiation. Commun. Theor. Phys. 2019, 71, 1425. [Google Scholar] [CrossRef]
  17. Shah, Z.; Kumam, P.; Deebani, W. Radiative MHD Casson Nanofluid Flow with Activation energy and chemical reaction over past nonlinearly stretching surface through Entropy generation. Sci. Rep. 2020, 10, 4402–4414. [Google Scholar] [CrossRef] [Green Version]
  18. Eid, M.R. Effects of NP Shapes on Non-Newtonian Bio-Nanofluid Flow in Suction/Blowing Process with Convective Condition: Sisko Model. J. Non-Equilib. Thermodyn. 2020, 45, 97–108. [Google Scholar] [CrossRef]
  19. Shaw, S.; Dogonchi, A.S.; Nayak, M.K.; Makinde, O.D. Impact of Entropy Generation and Nonlinear Thermal Radiation on Darcy–Forchheimer Flow of MnFe2O4-Casson/Water Nanofluid due to a Rotating Disk: Application to Brain Dynamics. Arab. J. Sci. Eng. 2020, 1–20. [Google Scholar] [CrossRef]
  20. Sheremet, M.A.; Pop, I.; Öztop, H.F.; Abu-Hamdeh, N. Natural convective heat transfer and nanofluid flow in a cavity with top wavy wall and corner heater. J. Hydrodyn. 2016, 28, 873–885. [Google Scholar] [CrossRef]
  21. Mikhail, A.S.; Ioan, P. Effect of local heater size and position on natural convection in a tilted nanofluid porous cavity using LTNE and Buongiorno’s models. J. Mol. Liq. 2018, 266, 19–28. [Google Scholar]
  22. Zaib, A.; Haq, R.U.; Sheikholeslami, M.; Chamkha, A.J.; Rashidi, M.M. Impact of non-darcy medium on mixed convective flow towards a plate containing micropolar water-based tio2 nanomaterial with entropy generation. J. Porous Media 2020, 23, 11–26. [Google Scholar] [CrossRef]
  23. Sheikholeslami, M.; Sheremet, M.A.; Shafee, A.; Tlili, I. Simulation of nanoliquid thermogravitational convection within a porous chamber imposing magnetic and radiation impacts. Phys. A Stat. Mech. Appl. 2020, 124058. [Google Scholar] [CrossRef]
  24. Ma, Y.; Mohebbi, R.; Rashidi, M.M.; Yang, Z.; Sheremet, M.A. Numerical study of MHD nanofluid natural convection in a baffled U-shaped enclosure. Int. J. Heat Mass Transf. 2019, 130, 123–134. [Google Scholar] [CrossRef]
  25. Sheikholeslami, M.; Öztop, H.F.; Abu-Hamdeh, N.H.; Li, Z. Nanoparticle transportation of CuO-H2O nanofluid in a porous semi annulus due to Lorentz forces. Int. J. Numer. Methods Heat Fluid Flow 2019, 29, 294–308. [Google Scholar] [CrossRef]
  26. Darya, S.B.; Mikhail, A.S.; Hakan, F.O.; Mohamed, E.A. Natural convection of Al2O3/H2O nanofluid in a cavity with a heat-generating element. Heatline visualization. Int. J. Heat Mass Transf. 2019, 130, 564–574. [Google Scholar]
  27. Selimefendigil, F.; Öztop, H.F.; Chamkha, A.J. Mixed Convection of Pulsating Ferrofluid Flow Over a Backward-Facing Step. Iran. J. Sci. Technol. Trans. Mech. Eng. 2018, 43, 593–612. [Google Scholar] [CrossRef]
  28. Mehryan, S.; Vaezi, M.; Sheremet, M.; Ghalambaz, M. Melting heat transfer of power-law non-Newtonian phase change nano-enhanced n-octadecane-mesoporous silica (MPSiO2). Int. J. Heat Mass Transf. 2020, 151, 119385. [Google Scholar] [CrossRef]
  29. Öztop, H.F.; Abu-Nada, E.; Varol, Y.; Chamkha, A. Natural convection in wavy enclosures with volumetric heat sources. Int. J. Therm. Sci. 2011, 50, 502–514. [Google Scholar] [CrossRef]
  30. Selimefendigil, F.; Öztop, H.F.; Chamkha, A.J. Fluid–structure-magnetic field interaction in a nanofluid filled lid-driven cavity with flexible side wall. Eur. J. Mech. B/Fluids 2017, 61, 77–85. [Google Scholar] [CrossRef]
  31. Selimefendigil, F.; Öztop, H.F.; Chamkha, A.J. MHD mixed convection in a nanofluid filled vertical lid-driven cavity having a flexible fin attached to its upper wall. J. Therm. Anal. Calorim. 2019, 135, 325–340. [Google Scholar] [CrossRef]
  32. Abolbashari, M.H.; Freidoonimehr, N.; Nazari, F.; Rashidi, M.M. Entropy analysis for an unsteady MHD flow past a stretching permeable surface in nano-fluid. Powder Technol. 2014, 267, 256–267. [Google Scholar] [CrossRef]
  33. Kumar, M.; Reddy, G.J.; Kiran, G.R.; Aslam, M.A.M.; Beg, O.A. Computation of entropy generation in dissipative transient natural convective viscoelastic flow. Heat Transf. -Asian Res. 2019, 48, 1067–1092. [Google Scholar] [CrossRef]
  34. Shukla, N.; Rana, P.; Bég, O.A. Unsteady MHD Non-Newtonian Heat Transfer Nanofluids with Entropy Generation Analysis. Nonlinear Eng. 2019, 8, 630–644. [Google Scholar] [CrossRef]
  35. Saeed, A.; Ahmad, H.P.; Masoud, A.; Mohsen, S.; Josua, M. Natural convective heat transfer and entropy generation of alumina/water nanofluid in a tilted enclosure with an elliptic constant temperature: Applying magnetic field and radiation effects. Int. J. Mech. Sci. 2020, 174, 105470. [Google Scholar]
  36. Seyyedi, S.M.; Dogonchi, A.; Hashemi-Tilehnoee, M.; Waqas, M.; Ganji, D. Entropy generation and economic analyses in a nanofluid filled L-shaped enclosure subjected to an oriented magnetic field. Appl. Therm. Eng. 2020, 168, 114789. [Google Scholar] [CrossRef]
  37. Mohammad, R.S.; Mohammad, T.-R.; Rostamzadeh, H. Heat transfer and entropy generation analysis in a three-dimensional impinging jet porous heat sink under local thermal non-equilibrium condition. Int. J. Therm. Sci. 2020, 153, 106348. [Google Scholar]
  38. Khan, M.; Shahid, A.; El Shafey, M.; Salahuddin, T.; Khan, F. Predicting entropy generation in flow of non-Newtonian flow due to a stretching sheet with chemically reactive species. Comput. Methods Programs Biomed. 2020, 187, 105246. [Google Scholar] [CrossRef]
  39. Mustafa, M. MHD nanofluid flow over a rotating disk with partial slip effects: Buongiorno model. Int. J. Heat Mass Transf. 2017, 108, 1910–1916. [Google Scholar] [CrossRef]
  40. Arikoglu, A.; Ozkol, I.; Kömürgöz, G. Effect of slip on entropy generation in a single rotating disk in MHD flow. Appl. Energy 2008, 85, 1225–1236. [Google Scholar] [CrossRef]
Figure 1. Schematic diagram and coordinate system.
Figure 1. Schematic diagram and coordinate system.
Entropy 22 00495 g001
Figure 2. Impact of S on H ( η ) .
Figure 2. Impact of S on H ( η ) .
Entropy 22 00495 g002
Figure 3. Impact of S on H ( η ) .
Figure 3. Impact of S on H ( η ) .
Entropy 22 00495 g003
Figure 4. Impact of M on H ( η ) .
Figure 4. Impact of M on H ( η ) .
Entropy 22 00495 g004
Figure 5. Impact of M on H ( η ) .
Figure 5. Impact of M on H ( η ) .
Entropy 22 00495 g005
Figure 6. Impact of β on H ( η ) .
Figure 6. Impact of β on H ( η ) .
Entropy 22 00495 g006
Figure 7. Impact of β on H ( η ) .
Figure 7. Impact of β on H ( η ) .
Entropy 22 00495 g007
Figure 8. Impact of γ on H ( η ) .
Figure 8. Impact of γ on H ( η ) .
Entropy 22 00495 g008
Figure 9. Impact of γ on H ( η ) .
Figure 9. Impact of γ on H ( η ) .
Entropy 22 00495 g009
Figure 10. Impact of P r on θ ( η ) .
Figure 10. Impact of P r on θ ( η ) .
Entropy 22 00495 g010
Figure 11. Impact of N t on θ ( η ) .
Figure 11. Impact of N t on θ ( η ) .
Entropy 22 00495 g011
Figure 12. Variation in θ ( η ) for heat source case.
Figure 12. Variation in θ ( η ) for heat source case.
Entropy 22 00495 g012
Figure 13. Variation in θ ( η ) for heat sink case.
Figure 13. Variation in θ ( η ) for heat sink case.
Entropy 22 00495 g013
Figure 14. Impact of L e on ϕ ( η ) .
Figure 14. Impact of L e on ϕ ( η ) .
Entropy 22 00495 g014
Figure 15. Impact of N t on ϕ ( η ) .
Figure 15. Impact of N t on ϕ ( η ) .
Entropy 22 00495 g015
Figure 16. Impact of N b on ϕ ( η ) .
Figure 16. Impact of N b on ϕ ( η ) .
Entropy 22 00495 g016
Figure 17. Impact of K 1 on ϕ ( η ) .
Figure 17. Impact of K 1 on ϕ ( η ) .
Entropy 22 00495 g017
Figure 18. Impact of β on N G .
Figure 18. Impact of β on N G .
Entropy 22 00495 g018
Figure 19. Impact of γ on N G .
Figure 19. Impact of γ on N G .
Entropy 22 00495 g019
Figure 20. Impact of P r on N G .
Figure 20. Impact of P r on N G .
Entropy 22 00495 g020
Figure 21. Impact of β on   B e .
Figure 21. Impact of β on   B e .
Entropy 22 00495 g021
Figure 22. Impact of γ on   B e .
Figure 22. Impact of γ on   B e .
Entropy 22 00495 g022
Figure 23. Impact of P r on   B e .
Figure 23. Impact of P r on   B e .
Entropy 22 00495 g023
Table 1. Validation of results with Mustafa [39] when β .
Table 1. Validation of results with Mustafa [39] when β .
Parameter f ( 0 )
M Mustafa [39]Present results
0.00.2595340.259538
0.50.1911760.191181

Share and Cite

MDPI and ACS Style

Khan, N.; Riaz, I.; Hashmi, M.S.; Musmar, S.A.; Khan, S.U.; Abdelmalek, Z.; Tlili, I. Aspects of Chemical Entropy Generation in Flow of Casson Nanofluid between Radiative Stretching Disks. Entropy 2020, 22, 495. https://0-doi-org.brum.beds.ac.uk/10.3390/e22050495

AMA Style

Khan N, Riaz I, Hashmi MS, Musmar SA, Khan SU, Abdelmalek Z, Tlili I. Aspects of Chemical Entropy Generation in Flow of Casson Nanofluid between Radiative Stretching Disks. Entropy. 2020; 22(5):495. https://0-doi-org.brum.beds.ac.uk/10.3390/e22050495

Chicago/Turabian Style

Khan, Nargis, Iram Riaz, Muhammad Sadiq Hashmi, Saed A. Musmar, Sami Ullah Khan, Zahra Abdelmalek, and Iskander Tlili. 2020. "Aspects of Chemical Entropy Generation in Flow of Casson Nanofluid between Radiative Stretching Disks" Entropy 22, no. 5: 495. https://0-doi-org.brum.beds.ac.uk/10.3390/e22050495

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop