Next Article in Journal / Special Issue
Measuring the Change Towards More Sustainable Mobility: MUV Impact Evaluation Approach
Previous Article in Journal
Trends in Occurrences of Systems Engineering Topics in Literature
Previous Article in Special Issue
Sustainability Assessment of Asset Management Decisions for Wastewater Infrastructure Systems—Development of a System Dynamic Model
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Addressing the Sustainability Issue in Smart Cities: A Comprehensive Model for Evaluating the Impacts of Electric Vehicle Diffusion

LINKS Foundation, Via Pier Carlo Boggio, 61, 10138 Torino, Italy
*
Author to whom correspondence should be addressed.
Submission received: 7 May 2019 / Revised: 7 June 2019 / Accepted: 10 June 2019 / Published: 15 June 2019

Abstract

:
The present paper proposes a model for evaluating environmental, social, and economic impacts exerted by the diffusion of electric vehicles (EVs), which is a phenomenon that can significantly affect the achievement of some of the objectives set by the Sustainable Development Agenda. The impact evaluation is carried out through the System Dynamics methodology, combined with scenario analysis. Considering the Piedmont region (Italy) as a case study, the model forecasts the impacts of EV diffusion using a simulation timeframe of 12 years and leveraging eight EV diffusion scenarios. According to the model, an increase in the number of EVs results in less air pollution and, therefore, minor public health expenditure. These cost savings can be turned into incentives for purchasing new EVs, which make the fleet increasingly greener as part of a self-reinforcing loop. Despite the fact that the model could be improved through additional research on some variables’ definitions, this ex ante evaluation tool represents a valuable instrument for policy-makers. In fact, it provides a comprehensive picture of EV diffusion in view of the triple sustainability principles: System Dynamics, in particular, allows singling out causal relationships among variables, thus anticipating possible effects of planned policy actions.

1. Introduction

In the last decade, policy-makers had to deal with global challenges posed by unprecedented demographic and social issues, climate change, and the consequences of the recent economic crisis [1]. In this context, the sustainability paradigm has become a leitmotiv for shaping a wide range of policies that regard, among others, mobility and transportation, production and consumption systems, and the environment at large. Acknowledging the importance of this topic, the United Nations promoted the 2030 Agenda for Sustainable Development [2], adopted by world leaders in September 2015. The agenda aims to provide guidelines and set concrete objectives in order to end all forms of poverty, fight inequalities, and tackle climate change. More specifically, themes covered by the agenda meet relevant needs in terms of social (e.g., hungry, health and well-being, education), economic (e.g., work and economic growth, industry, responsible production), and environmental (e.g., water, energy, land use, climate change) issues, in line with the triple sustainability approach [3]. According to the agenda, these elements are deeply intertwined and are fundamental for promoting the well-being of individuals and societies.
Drawing on these considerations, the present paper casts a light on a phenomenon that can significantly affect the achievement of some of the Sustainable Development Goals [4] defined by the Agenda, namely the diffusion of electric vehicles (EVs) in modern cities. As a matter of fact, sustainable mobility is crucial for achieving the 2030 Agenda for Sustainable Development and its Sustainable Development Goals. In this regard, the report published by the Sustainable Mobility for All initiative [5] proposes an assessment of the transport sector and its contribution to a sustainable future. It identifies green mobility as one of the four key attributes that will characterize the future mobility system.
In more detail, by adopting a comprehensive and systemic approach, this article aims at evaluating the impacts exerted by the partial substitution of the conventional vehicle fleet with electric vehicles. Impacts under the lens have to do with the environment and climate change (Sustainable Development Goal 13), population health and well-being (Sustainable Development Goal 3), and the development of smart cities (Sustainable Development Goal 11). This last topic is of utmost importance and has been examined by many authors in recent years. Even if there is not a unique and universally accepted definition for the term “smart city” [6,7] there is a large consensus on the need to consider not only the technological dimension of the phenomenon, but also other social, cultural, economic, environmental, and governance factors [8,9]. In this regard, themes related to mobility are certainly relevant.
Since traffic emissions significantly contribute to air quality [10], policy-makers are aware of the need to encourage actions that boost alternative mobility solutions [11,12]. Initiatives in this vein are, for instance, the promotion of the public transport system, the diffusion of car/ride sharing, and the allocation of incentives to stimulate the adoption of green vehicles. The latter is certainly one of the most impactful types of initiatives, as demonstrated by countries in which it is already a well-established practice (e.g., Norway [13]). Moreover, policy-makers need to understand the extent to which their planned actions could be effective and capable of unleashing benefits for the entire community.
Grounding on these considerations, this study makes reference to the two typologies of electric vehicles currently available: (a) battery electric vehicles (BEVs), which run exclusively on electricity via on-board batteries that are charged by plugging them into a charging station, and (b) plug-in hybrid electric vehicles (PHEVs), which have both an electric motor and an internal combustion engine (ICE) but the primary energy source is the electric motor, whose batteries can be charged by plugging in. The remainder of the vehicle fleet analyzed consists of conventional vehicles, including gasoline-fueled, diesel-fueled, and conventional hybrid vehicles.
The main objective of the present study is to show the social, economic, and environmental benefits that can be achieved by (partially) replacing the conventional urban vehicle fleet with electric cars and to understand what the variables that significantly influence the achievement of such benefits are. Moreover, the study points out the relevance of using a scenario-based, ex ante evaluation tool for improving decision-making processes.
In order to accomplish these objectives, in this paper EVs impacts are evaluated by focusing on the environmental, social, and economic dimensions, thus following the triple sustainability approach and in line with priorities set by the Sustainable Development Agenda.
The present article considers the Italian region Piedmont as case study. Piedmont is a region in the North of Italy that has to tackle with relevant issues related to air pollution. According to the last report of the environmental association Legambiente [14] some of Piedmont’s provincial capitals (Torino, Alessandria, and Cuneo) fall within the main polluted cities in Italy. On its side, the regional government is evaluating and putting in place several actions aimed at reducing air pollutants’ emissions, focused on sustainable mobility options [15].
Considering this regional background EVs impacts are evaluated through a scenario-based, ex ante approach that leverages System Dynamics (SD) simulation [16]. Such an approach has been selected as it allows the analysis of a complex system by considering the causal and dynamic relationships existing among the defined variables. The reference time horizon chosen for the simulation is 12 years: it starts in 2018 and ends in 2030, in line with the timeline of the Sustainable Development Agenda.
Concluding these introductory comments, the paper is structured as follows: Section 2 focuses on materials and methods with the aim to justify the choice of SD methodology for analyzing EVs’ impacts. Furthermore, it describes the model and the portfolio of chosen scenarios. Section 3 illustrates the main outputs of the simulation and, finally, Section 4 critically discusses the work carried out, highlights concluding remarks, and provides suggestions for future research.

2. Materials and Methods

2.1. Methodology

In the recent past, many scholars ventured into research on road traffic implications and studied the effects of pollutant emissions on the environment and on human health. This topic is of utmost importance for policy-makers that need to define effective strategies to prevent further damage to the whole society. Along this strand of research, the examination of alternative mobility strategies has become a crucial topic for the scientific community.
EVs’ impacts have been investigated through two main methodologies: Life Cycle Assessment (LCA) and Scenario Analysis.
The first methodology (LCA) [17] has been adopted primarily for studying environmental impacts in terms of greenhouse gas emissions and energy consumption [18]. These kinds of LCA models, however, rarely account for socioeconomic effects and, due to this reason, may not be sufficient to fully assess the long-term sustainability of alternative vehicles’ diffusion.
On the other hand, scenario analysis [19] can be combined with diffusion modelling and/or simulation techniques (e.g., System Dynamics, Agent-based modelling) in order to shed light on the causal relationships existing among the several variables that are part of a complex system.
The System Dynamic approach [16] has been considered the most suitable technique to accomplish the objectives of the present study. In fact, it allows to analyze in a systemic way all the variables determining EVs diffusion as well as their interdependences and causal relationships [20]. Worth of note is that SD has already been used in other studies on EV impacts, even if many of them are centered on very specific aspects as they consider case-by-case one of the triple sustainability principles as predominant over the others [21,22,23,24]. The present study, instead, aims to leverage the SD method to further elaborate EVs impacts analysis by putting together the social, environmental and economic dimensions. An approach in this vein intends to provide a contribution to limited research available in this regard [25,26] while reflecting the systemic approach envisaged by the 2030 Agenda for Sustainable Development.
Figure 1 shows how the SD approach, coupled with scenario analysis, has been applied in this article. Firstly, the SD Causal Loop and Stock and Flows diagrams have been created: drawing on an extensive review of pertinent research literature, variables involved in the model and their relationships have been identified and, afterwards, they have been quantitatively defined using available data collected on transportation/mobility websites and specialized reports. Moreover, the review of existing studies on EVs future trends inspired the characterization of eight EV diffusion scenarios. Finally, the SD simulation outputs have been used as basis for estimating EVs’ impacts adopting the counterfactual approach (i.e., comparison of each scenario’s results with a reference scenario).

2.2. The Model

The present paper is framed around the System Dynamics model built to evaluate the impacts exerted by the introduction of electric vehicles in the current vehicle fleet. The model has been conceived in order to improve the achievements of a previous research work discussed by the authors in [26]. In more detail, following the triple sustainability approach [3], the model factors in:
  • the environmental sphere in terms of reduction of greenhouse gases (GHG) and pollutant emissions;
  • the social dimension in terms of impacts on the health of people residing in the area (minor health costs). Authors assume that improved environmental and health conditions can be associated to a better quality of life, in accordance with the OECG Better Life Index [27]; and
  • the economic sphere in terms of reduction of public health costs and distribution of these public cost savings as incentives for the purchase of new BEVs.
Figure 2 visualizes a simplified version of the model, emphasizing the triple sustainability dimensions and the main feedback loop that involves:
  • The number of operating vehicles;
  • The total amount of pollutants with negative effects on health (i.e., PM2.5, NMVOC, NOx, and SO2);
  • The total public health costs associated to such pollutants; and
  • The related savings for public health that can be turned into incentives for the purchase of new BEVs (i.e., ‘BEV extra’).
The complete version of the model—which comprises about seventy variables (Figure A1)—and the related table of variables (Table A1) is shown in Appendix A.
The model refers to a generic BEV and a generic PHEV considering average data of the five best-selling electric vehicles in Italy in 2018 according to European Alternative Fuels Observatory [28]. Selected models are reported in Table 1.
Hereafter a brief description of the model is provided.
Firstly, the model allows to determine the total number of operating EVs in the region (‘TOT EV’) as the sum of circulating BEVs and PHEVs:
TOT EV = TOT PHEV + TOT BEV.
‘TOT EV’ depends on a fixed component (‘TOT EV (estim)’) defined on the basis of existing trends in literature [29] and on a model-dependent component (‘BEV extra’), that represents the supplementary set of BEVs that can be introduced in the vehicle fleet as consequence of the distribution of the Public Health Monetary Savings:
TOT EV = TOT EV (estim) + BEV extra
TOT EV (estim) = TOT PHEV + TOT BEV (estim)
Secondly, for each typology of vehicle (BEV, PHEV, and Conventional) it is possible to calculate the total emissions generated by the main air pollutants. The authors selected CO2, PM2.5, NOX, NMVOC, and SO2 as the main elements that significantly contribute to the traffic road pollution. This choice has its roots in scientific evidence and model-specific constraints in terms of data availability and variable definitions.
In this regard, it is worth reminding that, unlike PHEVs and conventional vehicles, BEVs don’t emit pollutants while travelling, thus being responsible only for the emission of CO2 in the energy production process:
CO2 emissions BEV = Amount energy required to travel × Factor emission CO2 production
where ‘Factor emission CO2 production’ depends on the national energy production mix. Note that the use of renewable sources for the national energy production would significantly improve this value.
CO2 emissions significantly contribute to global warming and climate change [11,30] while their impact on human health is not taken into account by the model as epidemiological studies usually do not consider this GHG. Other pollutants, for their part, are considered for both their environmental impact and their indirect social and economic impacts in view of the existing research in this field [31,32,33,34,35].
Health costs of air pollution are evaluated in several studies by connecting pollutant concentration to hospital admissions and, consequently, to their costs [32,33]. Along these lines, the proposed SD model estimates the total amount of pollutant emissions. It is worth noting that there is no evidence in the existing literature of a linear relationship between the total emissions and their concentration [34]. Due to this reason, the model refers to the outputs of the HEATCO project [35], which defines a unit cost (€/t) for each pollutant generated by road transport (PM2.5, NOX, NMVOC, and SO2). The study links the total emissions of circulating vehicles to healthcare costs in terms of reduction of life expectancy (YOLL: years of life lost), and to a number of other health costs in addition to damage to buildings and crops. The total cost of emissions is calculated by multiplying, for each pollutant, its related cost factor.
Finally, after having computed the sanitary costs for pollutant emissions, it became possible to estimate for each year the related cost savings. This was done by comparing the cost per annum with the value obtained for the previous year. As per the logic underlying the SD model, these savings are converted into incentives for facilitating the purchase of new BEVs (i.e., ‘BEV extra’). Specifically, the number of ‘BEV extra’ is defined as the minimum between ‘BEV extra potential’ and ‘BEV extra theoretical’, where:
  • ‘BEV extra potential’ is the ratio between ‘Public Health Monetary Savings’ and the incentive (‘incentives’ = ‘incentives rate’ × ’average price BEV’). It represents the potential number of BEVs that could benefit from the distribution of the public health monetary savings, according to the model.
  • ‘BEV extra theoretical’ is the theoretical number of new BEVs that could be introduced in the market corresponding to a specific ‘incentives rate’. This value has been modelled on the basis of the ICCT white paper [36] and is obtained considering the relationship between the BEV market share and the incentives rate in some European countries. This represents the number of BEVs that customers are willing to buy, given a specific incentive.
Note that the model relies on the choice of an optimal value for the ‘incentives rate’ that will be discussed at the beginning of Section 3.
The main assumptions underlying the modelling of the complex system herein illustrated are listed below:
  • the trend of the total vehicle fleet operating (‘TOT vehicles’) follows the estimates by PWC [37], which forecasts that in Europe the car inventory will decrease by 25% by 2030. Moreover, the same report predicts that, despite this decrease in the total circulating fleet, new vehicle sales (‘TOT new vehicles’) will visibly increase (in Europe by 34%). The report forecasts a renewal of the vehicle fleet in the next 10 years characterized by an increasing presence of low emission vehicles, coupled with the diffusion of autonomous and shared autonomous vehicles (a similar vision is pointed out also by McKinsey and Company [38]);
  • The number of electric vehicles operating over time (‘TOT EV’) depends on well-established trends defined in the literature [29] already reflecting some significant factors (e.g., the total cost of ownership, complementary assets, range anxiety) that, consequently, are not taken into consideration within the model;
  • the incentive mechanism depends on the theoretical relationship between incentives and new BEV market share [36] and it is assumed to be constant over time. It has to be said that this is a pessimistic assumption, as projections show an increasing trend of electric vehicle sales [37] over time;
  • the average purchase price of BEVs decreases over time according to the hypotheses formulated by Bloomberg New Energy Finance [39] and Deloitte [40];
  • the average purchase price of PHEVs is not considered in the model because incentives introduced for the purchase, converted from monetary savings in public health, stimulate only the adoption of new BEVs that don’t contribute to pollutants with negative effects on health;
  • healthcare savings (‘Public Health Monetary Savings’) are entirely converted into incentives for BEV purchase (‘BEV extra’) with the idea of fostering the adoption of green vehicles that don’t produce pollutants with negative effect on human health and, hence, don’t determine additional healthcare costs; and
  • NOx, NMVOC, SO2, and PM2.5 are assumed to be the main pollutants causing detrimental effects on human health [31,35]. CO2 is one of the main components of GHGs and is considered for its environmental impact [11,30] but its effects on human health are not taken into account due to the paucity of relevant studies in this regard.

2.3. Scenarios

As previously explained the total number of operating EVs in the model (‘TOT EV’) depends on a fixed component (‘TOT EV (estim)’) defined on the basis of existing trends in the literature and on a model-dependent component (‘BEV extra’).
Specifically, grounding on the analysis of previous studies and data on EVs in Europe [29,41], eight simulation scenarios have been defined. They can be used for evaluating the impacts of EV uptake using a counterfactual approach: simulation results obtained through the simulation of each scenario until 2030 can be compared with a reference scenario in order to quantify the impacts of a specific policy action.
In the model, the eight EVs diffusion scenarios are used as input data for ‘TOT BEV (estim)’ and ‘TOT PHEV’ variables and have been shaped by combining the following two dimensions:
  • EV Trend: The number of circulating electric cars (‘TOT EV (estim)’) is deduced from the pertinent literature [29]. In more detail, four trends were selected: they follow the study published by the Italian Sustainable Development Foundation [29], which identifies four possible trends for electric vehicle diffusion, ranging from a pessimistic trend (i.e., 10% of new car sales in 2030 are EVs) to an extreme optimistic diffusion (i.e., EV market share equal to 80% in 2030). Figure 3 briefly summarizes the trends considered by the SD model: their operationalization was performed by adapting Italian data used by the Italian Sustainable Development research to the Piedmont case [41].
  • Market split of BEVs and PHEVs: Two levels of distribution of EV fleet have been hypothesized:
(a) the total presence of BEVs in 2030 vehicle fleet (i.e., 100% BEVs and 0% PHEVs):
TOT EV (estim) = TOT BEV (estim)
This split is coherent with the current distribution of BEVs and PHEVs in the car fleet (i.e., 239 BEVs and seven PHEVs operating in Piedmont in 2017, according to ACI data [41]) and in line with some estimates provided by electric mobility experts [42].
(b) an equal split of BEVs and PHEVs in the vehicle fleet (i.e., 50% of electric vehicles operating in Piedmont in 2030 are BEVs and 50% are PHEVs):
TOT BEV (estim) = TOT PHEV= 50% × TOT EV (estim)
This assumption is a pessimistic hypothesis, since data and estimates [42,43] show the prevalence of BEVs in the market.
Table 2 proposes a summary of the resulting scenarios (S1–S8).
For carrying out the counterfactual analysis, the authors chose S1 as the reference scenario, which is based on a ‘pessimistic’ trend and a market split of BEVs/PHEVs that reflects, as much as possible, the current one in the target area.

3. Results

The model has been built and verified by means of Vensim software (Harvard, MA, USA) [44]. Whilst the chosen time horizon is 12 years (until 2030), the simulation time step equals one year.
Before delving into the details with the analysis of the simulation results, it is fundamental to illustrate the criteria that has been followed for the choice of the value for the ‘incentives rate’ in the model. The choice was made for improving the results obtained in the first version of the model (discussed by the authors in [26]), which was based on the assumption that all the healthcare savings were converted in new BEVs (full ‘incentives rate’ = 100% ‘Average price BEV’). Following the assumption of the previous model, in fact, the number of ‘BEV extra’ stemming from a full ‘incentives rate’ constitutes a lower bound for the variable. In order to overcome this issue, in this paper the optimal ‘incentives rate’ is proposed.
The optimal value of the ‘incentives rate’ can be identified by monitoring how the ‘BEV extra’ variable changes considering decreasing ‘incentives rate’ (from 100%). The variable reaches a peak in correspondence of an optimal ‘incentives rate’ value, and then it drops. Figure 4 exemplifies this trend for the S1 scenario as an example of sensitivity analysis conducted on this key parameter. Similar trends have been identified for all the scenarios.
The optimal value of the ‘incentives rate’ represents the trade-off value of the ‘incentives rate’ that maximizes the cumulative ‘BEV extra potential’ at 2030. In other words, it is the highest value of the ‘incentives rate’ for which ‘BEV extra’ = ‘BEV extra potential’ in 2030. Table 3 summarizes the optimal ‘incentives rates’ considered for the eight scenarios.
In synthesis, the selection of the optimal ‘incentives rate’ allows to obtain better results in terms of additional BEVs introduced in the vehicles fleet, public health monetary savings, and a higher reduction of pollutants. Grounding on the choice of the optimal value of the ‘incentives rate’, in the following part of the chapter the main simulation results are illustrated by taking into consideration the three dimensions of the triple sustainability approach, namely environmental, social, and economic.
Table 4 explains how electric vehicles are going to (partially) replace the conventional fleet in the hypothesized scenarios. The percentage of circulating EVs in Piedmont (‘TOT EV’)—currently close to 0—is ripe to reach significantly higher values in 2030: the pessimistic scenarios (S1–S2) forecast the achievement of the target of 3.06% EVs in 2030, while, for the extreme ones (S7–S8), EVs can represent almost a quarter of the total vehicle fleet in 2030.
When it comes to environmental impacts, simulation results show decreasing trends for the emissions of all the pollutants considered. In this regard, Figure 5 proposes, as example, the trend of CO2 emissions (‘CO2 Emission Total’) in the eight scenarios. In the best case (S7) the difference between CO2 emissions at the beginning of the simulation (2018) and at the end of the simulation (2030) is 1 Mt, while in the worst case (S2) it is 0.85 Mt.
Figure 6 illustrates that also the costs associated to pollutants with negative effects on human health (‘TOT pollutants costs’) are going to decrease following a similar trend, thus contributing to a better quality of life (social impacts). The related public costs savings that can be turned in incentives for the purchase of new BEVs are 136 M€ in the best case (S7) and 85 M€ in the worst case (S2) (economic impacts).
Finally, the next two tables report the main results of the simulation in absolute values (Table 5) and compared to the reference scenario chosen for conducting the counterfactual analysis (S1) (Table 6).
Taking S1 as reference, results show that the most encouraging scenario is the extreme one having a 100% BEV market split (S7). Conversely, the most unpromising is the pessimistic one with 50% BEVs–50% PHEVs (S2). Moreover, for all the EV trends hypothesized, the scenarios corresponding to a full adoption of BEVs (100% BEVs) yield better results (Table 7). This outcome is ascribed to the different contribution provided by PHEVs and BEVs to pollutant emissions: BEVs, in fact, are only responsible of CO2 emissions in the energy production process, while they do not emit other pollutants when travelling.
By taking advantage of the proposed approach, policy-makers become able to explore the effects of different mobility strategies through a what-if analysis. By doing this, they have at their fingertips foreseen impacts of the different scenarios in terms of environmental, social, and economic benefits. As an example, if compared to the reference scenario S1, S7 determines a minor amount of air pollutants with negative effects on human health (−2.91 Mt in 2030). This will, in turn, reduce costs incurred for the public health, thus resulting into higher monetary savings (42.6 M€ in total, approximately 3.5 M€ per annum).

4. Discussion

The present study intends to advance and systematize how the impacts of EV uptake are evaluated in a regional context. To this end, an SD model has been designed following the triple sustainability principles. To estimate the total amount of pollutants as well as related costs, authors have established eight different EV diffusion scenarios. The rationale underlying the model is that an increase in the number of electric vehicles (‘TOT EVs’) determines less air pollutants (CO2, NOx, NMVOC, SO2, PM2.5) (environmental impact) and fewer costs incurred for public health (‘TOT pollutant costs’), thus contributing to a better quality of life (social impact). Governments, thus, have the opportunity to turn these cost savings (‘Public Health Monetary Savings’) into incentives for purchasing new BEVs (‘BEV extra’), which, in turn, make the fleet increasingly greener as part of a self-reinforcing loop (economic impact). The optimal value of the incentive can be fine-tuned in view of (a) resource constraints (i.e., public health monetary savings), and (b) the theoretical number of BEVs that customers are willing to buy, given a specific incentive, defined according to ICCT white paper [36]. Generalizing the results obtained through the simulation, in the present case this value fluctuates around 30% of BEVs price: not only seems this value reasonable, but also in accordance with existing policies on EVs incentives [36].
Drawing on the results of this study, a number of strategic suggestions for forward-looking policy-makers can be distilled. Firstly, the model recognizes the importance of analyzing, in a comprehensive and harmonized way, the environmental, social, and economic dimensions of electric mobility strategies: this systemic approach allows understanding of all the many side effects of these policies on the society. Secondly, through the SD ex ante evaluation policy-makers can identify relevant variables that influence EV diffusion and single out the causal relationships between them, thus anticipating possible effects of planned policy actions. Moreover, a simulation model similar to the one presented beforehand can be used as a daily working tool by policy-makers responsible for drafting the Sustainable Urban Mobility Plan of a smart city. Their planning could definitely benefit from understanding and quantifying the foreseen impacts, which are heavily dependent on multiple, deeply intertwined factors. Furthermore, this study provides useful suggestions to policy-makers on how to optimally define fiscal incentives on EV purchases in their regions.
Finally, the footprint of urban mobility on our planet is a topical theme, which has a strategic alignment with the 2030 Agenda for Sustainable Development. Along these lines, the paper is centered on some of the core aspects of the 2030 Agenda for Sustainable Development and adopts the same multidimensional approach, acknowledging the importance of zooming in on the interrelation among social, environmental, and economic factors.
In the conclusive remarks, it is crucial to also discuss some of the limitations that characterize the presented work, as they may represent an interesting starting point for future research. For example, the incentive mechanism has been modelled by studying the theoretical relationship between incentives and the new BEV market share [36], and it is assumed to be constant over time. As projections show an upward trend in sales of electric vehicles [37], this assumption might be reviewed in future works. Furthermore, additional research should be undertaken on the relationship between the total amount of pollutant emissions and their related costs in order to build the model on more updated data and, to the extent possible, consider a wider range of pollutants.

Author Contributions

Conceptualization: E.P., M.O. and B.C.; formal analysis: E.P.; investigation: E.P.; methodology: E.P., M.O. and B.C.; project administration: E.P.; supervision: E.P.; validation: E.P., M.O. and B.C.; visualization: E.P.; writing—original draft: E.P.; writing—review and editing: E.P., M.O., and B.C.

Funding

This research received no external funding.

Conflicts of Interest

The authors declare no conflict of interest.

Appendix A

Figure A1. Complete SD model.
Figure A1. Complete SD model.
Systems 07 00029 g0a1
Table A1. All variables involved in the SD model.
Table A1. All variables involved in the SD model.
VariableFormulaUnitSource 1
Amount Energy Required to travelEnergy Consumption per km × Total km travelled BEVkWh
Average km travelled12,487km[45]
Average price BEVFrom 34,320 (2018) to 22,880 € (2030)Estimated from [39]
BEV extramin (BEV extra potential, BEV extra theoretical)vehicles
BEV extra potentialPublic Health Monetary Savings/incentivesvehicles
BEV extra theoreticalmarket share theoretical × TOT NEW vehiclesvehicles
CO2 Emission Conventional VehiclesFactor Emission CO2 Conventional Vehicles × Total km travelled Conventional Vehicleg
CO2 Emission delayedDELAY FIXED (CO2 Emission Total, 1 CO2 Emission Initial Value)g
CO2 Emission BEVAmount Energy Required to travel × Factor Emission CO2 Energy Productiong
CO2 Emission Initial ValueINITIAL (CO2 Emission Total)g
CO2 Emission PHEVTotal km travelled PHEV × Factor Emission CO2 PHEVg
CO2 Emission Total(CO2 Emission Conventional Vehicles + CO2 Emission BEV + CO2 Emission PHEV) × Conversion Factort
CO2 saved each yearCO2 Emission delayed-CO2 Emission Totalg
CO2 Saved Total INTEG (CO2 saved each year, 0)t
TOT Conventional Vehicles TOT vehicles—TOT PHEV—TOT BEV vehicles
Conversion Factor1/(1 × 106)
Emission Amount NMVOC Conventional VehiclesTotal km travelled Conventional Vehicles × NMVOC Emission Rate Conventionalg
Emission Amount NMVOC PHEVTotal km travelled PHEV × NMVOC Emission Rate PHEVg
Emission Amount NOX Conventional VehiclesTotal km travelled Conventional Vehicles × NOX Emission Rate Conventionalg
Emission Amount NOX PHEVTotal km travelled PHEV × NOX Emission Rate PHEVg
Emission Amount PM2.5 Conventional VehiclesTotal km travelled Conventional Vehicles × PM2.5 Emission Rate Conventionalg
Emission Amount PM2.5 PHEVTotal km travelled PHEV × PM2.5 Emission Rate PHEVg
Emission Amount SO2 Conventional VehiclesTotal km travelled Conventional Vehicles × SO2 Emission Rate Conventionalg
Emission Amount SO2 PHEVTotal km travelled PHEV × SO2 Emission Rate PHEVg
Energy Consumption per km0.157kWh/kmEstimated from [28]
Factor Emission CO2 Conventional Vehicles113.7g/km[46]
Factor Emission CO2 Energy Production397g/kWh[47]
Factor Emission CO2 PHEV92g/km[48]
gram tonn conversion factor10−6
incentivesincentives rate × Average price BEV
Incentives on Purchase PriceINTEG (+Public Health Monetary Savings, 0)
incentives rateSee Table 3
market share theoreticalIF THEN ELSE (incentives rate <0.4, 0.0225 × incentives rate, 0.3769 × incentives rate – 0.1418) Elaboration from [36]
NMVOC cost/ton1,600€/t[35]
NMVOC Emission Rate Conventional0.24g/km[49]
NMVOC Emission Rate PHEV0.11g/km[49]
NOX cost/ton3,200€/t[35]
NOX Emission Rate Conventional0.37g/km[49]
NOX Emission Rate PHEV0.029g/km[49]
PM2.5 Emission Rate Conventional0.024g/km[49]
PM2.5 Emission Rate PHEV0.012g/km[49]
PM2.5 cost/ton390,000€/t[35]
pollutants costs initial valueINITIAL (TOT pollutants costs)
Public Health Monetary SavingsTOT pollutants costs delayed – TOT pollutants costs
SO2 cost/ton3,500€/t[35]
SO2 Emission Rate Conventional0.00071g/km[49]
SO2 Emission Rate PHEV0.00044g/km[49]
TOT BEV TOT BEV (estim) + BEV extravehicles
TOT BEV (estim)Input data (for eight scenarios)vehiclesEstimated from [29]
Tot Emission NMVOC gramEmission Amount NMVOC Conventional Vehicles + Emission Amount NMVOC PHEVg
TOT Emission NMVOC tonTot Emission NMVOC gram × gram tonn conversion factort
Tot Emission NOX gramEmission Amount NOX Conventional Vehicles + Emission Amount NOX PHEVg
TOT Emission NOX tonTot Emission NOX gram × gram tonn conversion factort
Tot Emission PM2.5 gramEmission Amount PM2.5 Conventional Vehicles + Emission Amount PM2.5 PHEVg
TOT Emission PM2 5 tonTot Emission PM2 5 gram × gram tonn conversion factort
Tot Emission SO2 gramEmission Amount SO2 Conventional Vehicles + Emission Amount SO2 PHEVg
TOT Emission SO2 tonTot Emission SO2 gram × gram tonn conversion factort
TOT NEW vehiclesFrom 276,693 (2018) to 370,369 € (2030)vehiclesEstimated from [37]
TOT NMVOC costsTOT Emission NMVOC ton × “NMVOC cost/ton”
TOT NOX costs TOT Emission NOX ton × “NOX cost/ton”
TOT PHEV Input data (for eight scenarios)vehiclesEstimated from [29]
TOT PM2.5 costsTOT Emission PM2.5 ton × “PM2.5 cost/ton”
TOT pollutants costsTOT NMVOC costs + TOT NOX costs + TOT PM2.5 costs + TOT SO2 costs
TOT pollutants costs delayedDELAY FIXED (TOT pollutants costs,1,pollutants costs initial value)
TOT SO2 costsTOT Emission SO2 ton × “SO2 cost/ton”
TOT vehiclesFrom 2,329,173 (2018) to 1,746,880 € (2030)vehiclesEstimated from [37]
Total km travelled BEVBEV Operating × Average km travelledkm
Total km travelled Conventional VehiclesConventional Vehicles Operating × Average km travelledkm
Total km travelled PHEVPHEV Operating × Average km travelledkm
1 Sources are provided for constant/data variables.

References

  1. World Economic Forum. Available online: https://www.weforum.org/agenda/2016/01/what-are-the-10-biggest-global-challenges/ (accessed on 7 June 2019).
  2. Sustainable Development Agenda. Available online: https://sustainabledevelopment.un.org/post2015/transformingourworld (accessed on 7 June 2019).
  3. Elkington, J. Cannibals with Forks: The Triple Bottom Line of Twenty-First Century Business; Capostone: Oxford, UK, 1997. [Google Scholar]
  4. Sustainable Development Goals. Available online: https://www.un.org/sustainabledevelopment/sustainable-development-goals/ (accessed on 7 June 2019).
  5. Sustainable Mobility for All. Global Mobility Report. 2017. Available online: https://www.sum4all.org/publications/global-mobility-report-2017 (accessed on 7 June 2019).
  6. Albino, V.; Berardi, U.; Dangelico, R.M. Smart cities: Definitions, dimensions, performance, and initiatives. J. Urban Technol. 2015, 22, 3–21. [Google Scholar] [CrossRef]
  7. Chourabi, H.; Nam, T.; Walker, S.; Gil-Garcia, J.R.; Mellouli, S.; Nahon, K.; Pardo, T.A.; Scholl, H.J. Understanding smart cities: An integrative framework. In Proceedings of the 2012 45th Hawaii International Conference on System Science (HICSS), Maui, HI, USA, 4–7 January 2012. [Google Scholar]
  8. Caragliu, A.; Del Bo, C.; Nijkamp, P. Smart Cities in Europe. J. Urban Technol. 2011, 18, 65–82. [Google Scholar] [CrossRef]
  9. Allam, Z.; Newman, P. Redefining the smart city: Culture, metabolism & governance. Smart Cities 2018, 1, 4–25. [Google Scholar] [CrossRef]
  10. Colvile, R.N.; Hutchinson, E.J.; Mindell, J.S.; Warren, R.F. The transport sector as a source of air pollution. Atmos. Environ. 2011, 35, 1537–1565. [Google Scholar] [CrossRef]
  11. United Nations Environment Programme. Action on Air Quality. 2015. Available online: https://www.unenvironment.org/resources/assessment/actions-air-quality (accessed on 7 June 2019).
  12. McKinsey & Company. An Integrated Perspective of the Future of Mobility. 2016. Available online: https://www.mckinsey.com/business-functions/sustainability/our-insights/an-integrated-perspective-on-the-future-of-mobility (accessed on 7 June 2019).
  13. World Economic Forum. Available online: https://www.weforum.org/agenda/2018/09/electric-vehicles-are-half-the-market-in-norway/ (accessed on 7 June 2019).
  14. Legambiente. Mal’Aria di Città. 2019. Available online: https://www.legambiente.it/malaria-di-citta/ (accessed on 7 June 2019).
  15. Regione Piemonte. Piano Regionale per la Qualità dell’Aria. 2019. Available online: https://www.regione.piemonte.it/web/temi/ambiente-territorio/ambiente/aria/piano-regionale-qualita-dellaria-prqa (accessed on 7 June 2019).
  16. Sterman, J. Business Dynamics—System Thinking and Modeling for a Complex World; Irwin McGraw Hill: Boston, MA, USA, 2000. [Google Scholar]
  17. Klöppfer, W. Life Cycle Assessment: From the beginning to the current state. Environ. Sci. Pollut. Res. 1997, 4, 223–228. [Google Scholar] [CrossRef] [PubMed]
  18. Massagie, M.; Boureima, F.S.; Cossemans, T.; Macharis, C.; Mierlo, J.V. A Range-Based Vehicle Life Cycle Assessment Incorporating Variability in the Environmental Assessment of Different Vehicle Technologies and Fuels. Energies 2014, 7, 1467–1482. [Google Scholar] [CrossRef]
  19. Kosow, H.; Gaßner, R. Methods of Future and Scenario Analysis—Overview, Assessment, and Selection Criteria; German Development Institute (DIE) Studies: Bonn, Germany, 2008. [Google Scholar]
  20. Shepherd, S.P. A review of system dynamics models applied in transportation. Transp. B Transp. Dyn. 2014, 2, 83–105. [Google Scholar] [CrossRef] [Green Version]
  21. Cagliano, A.C.; Carlin, A.; Mangano, G.; Zenezini, G. System dynamics modelling for electric and hybrid commercial vehicles adoption. In Proceedings of the 6th International Conference on Theoretical and Applied Mechanics (TAM ’15), Salerno, Italy, 27–29 June 2015. [Google Scholar]
  22. Garcia, I.; Miguel, L. Is the electric vehicle an attractive option for customers? Energies 2012, 5, 71–91. [Google Scholar] [CrossRef]
  23. Gorbea, C.E.; Lindemann, U.; de Weck, O.L. System Dynamics Modeling of New Vehicle Architecture Adoption, Impacting Society through Engineering Design. In Proceedings of the 18th International Conference on Engineering Design (ICED 11), Lyngby/Copenhagen, Denmark, 15–18 August 2011. [Google Scholar]
  24. Yang, W.; Zhou, H.; Liu, J.; Dai, S.; Ma, Z.; Liu, Y. Market evolution modeling for electric vehicles based on system dynamics and multi-agents. In Proceedings of the International Symposium on Smart Electric Distribution Systems and Technologies (EDST), Vienna, Austria, 8–11 September 2015. [Google Scholar]
  25. Onat, N.C.; Kucukvar, M.; Tatari, O.; Egilmez, G. Integration of system dynamics approach toward deepening and broadening the life cycle sustainability assessment framework: A case for electric vehicles. Int. J. Life Cycle Assess. 2016, 21, 1009–1034. [Google Scholar] [CrossRef]
  26. Caroleo, B.; Pautasso, E.; Osella, M.; Palumbo, E.; Ferro, E. Assessing the impacts of electric vehicles uptake: A System Dynamics approach. In Proceedings of the 41st Annual Computer Software and Applications Conference (COMPSAC), Turin, Italy, 4–8 July 2017. [Google Scholar]
  27. OECD Better Life Index. Available online: http://www.oecdbetterlifeindex.org (accessed on 7 June 2019).
  28. EAFO. Available online: https://www.eafo.eu/vehicles-and-fleet/m1 (accessed on 7 June 2019).
  29. Fondazione per lo Sviluppo Sostenibile (Sustainable Development Foundation). La riduzione della CO2 nel settore trasporti. 2013. Available online: http://www.fondazionesvilupposostenibile.org/wp-content/uploads/dlm_uploads/fileManager/Documenti/CO2%20Trasporti/Rapporto_di_sintesi.pdf (accessed on 7 June 2019).
  30. EPA. Available online: https://www.epa.gov/ghgemissions/overview-greenhouse-gases (accessed on 7 June 2019).
  31. WHO. Available online: https://www.who.int/airpollution/ambient/health-impacts/en/ (accessed on 7 June 2019).
  32. Bellini, P.; Baccini, M.; Biggeri, A.; Terracini, B. The meta-analysis of the Italian studies on short-term effects of air pollution (MISA): Old and new issues on the interpretation of the statistical evidences. Environmetrics 2007, 18, 219–229. [Google Scholar] [CrossRef]
  33. Perez, L.; Grize, L.; Infanger, D.; Künzli, N.; Sommer, H.; Alt, G.; Schindler, C. Associations of daily levels of PM10 and NO2 with emergency hospital admissions and mortality in Switzerland: Trends and missed prevention potential over the last decade. Environ. Res. 2015, 140, 554–561. [Google Scholar] [CrossRef] [PubMed]
  34. Kim, K.H.; Shon, Z.H. Long-term changes in PM10 levels in urban air in relation with air quality control efforts. Atmos. Environ. 2011, 45, 3309–3317. [Google Scholar] [CrossRef]
  35. HEATCO Project. Proposal for Harmonized Guideline. Deliverable 5. 2006, Germany. Deliverable 5. Germany, 2006. Available online: https://trimis.ec.europa.eu/sites/default/files/project/documents/20130122_113653_88902_HEATCO_D5_summary.pdf (accessed on 7 June 2019).
  36. Mock, P.; Yang, Z. Driving Electrification—A Global Comparison of Fiscal Incentive Policy for Electric Vehicles; White Paper; ICCT: Washington, DC, USA, 2014. [Google Scholar]
  37. PWC. Five Trends Transforming the Automotive Industry. 2018. Available online: https://www.pwc.at/de/publikationen/branchen-und-wirtschaftsstudien/eascy-five-trends-transforming-the-automotive-industry_2018.pdf (accessed on 7 June 2019).
  38. McKinsey&Company. Automotive Revolution—Perspective towards 2030. 2016. Available online: https://www.mckinsey.com/~/media/mckinsey/industries/high%20tech/our%20insights/disruptive%20trends%20that%20will%20transform%20the%20auto%20industry/auto%202030%20report%20jan%202016.ashx (accessed on 7 June 2019).
  39. BloombergNEF. Available online: https://about.bnef.com/blog/electric-cars-reach-price-parity-2025/ (accessed on 7 June 2019).
  40. Deloitte. New Markets. New Entrants. New Challenges. Battery Electric Vehicles. 2019. Available online: https://www2.deloitte.com/content/dam/Deloitte/uk/Documents/manufacturing/deloitte-uk-battery-electric-vehicles.pdf (accessed on 7 June 2019).
  41. ACI, Annuario Statistico. 2018. Available online: http://www.aci.it/laci/studi-e-ricerche/dati-e-statistiche/annuario-statistico/annuario-statistico-2018.html (accessed on 7 June 2019).
  42. RAC Foundation. Powering Ahead: The Future of Low-Carbon Cars and Fuels. 2013. Available online: https://www.racfoundation.org/assets/rac_foundation/content/downloadables/powering_ahead-kay_et_al-apr2013.pdf (accessed on 7 June 2019).
  43. Cars Sales Statistics. Available online: https://www.best-selling-cars.com/electric/latest-europe-electric-and-plug-in-hybrid-car-sales-per-eu-and-efta-country/ (accessed on 7 June 2019).
  44. Ventana Systems, Inc—Vensim (Harvard, MA, USA). Available online: http://vensim.com/ (accessed on 7 June 2019).
  45. UNIPOLSAI. Available online: http://www.unipolsai.com/sites/corporate/files/press_related_documents/pre_unipolsai_2015_10_20_unipolsai_presentati-i-risultati-dell-osservatorio.pdf (accessed on 7 June 2019).
  46. EEA. Available online: https://www.eea.europa.eu/highlights/no-improvements-on-average-co2 (accessed on 7 June 2019).
  47. GSE. Valore del fattore emissivo relativo all’energia elettrica fornita ai veicoli stradali a trazione elettrica. 2018. Available online: https://www.gse.it/documenti_site/Documenti%20GSE/Servizi%20per%20te/EMISSIONI%20DI%20CO2%20NEI%20TRASPORTI/Valore%20FE%20GHG%20energia%20elettrica%20fornita%20ai%20veicoli%20stradali%20elettrici.pdf (accessed on 7 June 2019).
  48. Danielis, R. Le emissioni di CO2 delle auto elettriche e delle auto con motore a combustione interna. Un confronto per l’Italia tramite l’analisi del ciclo di vita; No 17_1, Working Papers; SIET Società Italiana di Economia dei Trasporti e della Logistica: Parma, Italy, 2017. [Google Scholar]
  49. SINAnet. Available online: http://www.sinanet.isprambiente.it/ (accessed on 7 June 2019).
Figure 1. Research methodology.
Figure 1. Research methodology.
Systems 07 00029 g001
Figure 2. Simplified view of the model: causal relationships involving electric vehicles (EVs) uptake.
Figure 2. Simplified view of the model: causal relationships involving electric vehicles (EVs) uptake.
Systems 07 00029 g002
Figure 3. The four EV trends (‘TOT EV (estim)’) in Piedmont. Authors’ elaboration from [29,41].
Figure 3. The four EV trends (‘TOT EV (estim)’) in Piedmont. Authors’ elaboration from [29,41].
Systems 07 00029 g003
Figure 4. Number of ‘BEV extra’ in S1 scenario according to different incentive rates.
Figure 4. Number of ‘BEV extra’ in S1 scenario according to different incentive rates.
Systems 07 00029 g004
Figure 5. CO2 emissions in each year of the simulation for the eight scenarios.
Figure 5. CO2 emissions in each year of the simulation for the eight scenarios.
Systems 07 00029 g005
Figure 6. Pollution-related health costs in each year of the simulation for the eight scenarios.
Figure 6. Pollution-related health costs in each year of the simulation for the eight scenarios.
Systems 07 00029 g006
Table 1. Five best-selling EVs in Italy in 2018.
Table 1. Five best-selling EVs in Italy in 2018.
BEVPHEV
Nissan LeafBMW 225xe Active Tourer
Renault ZoeMini Countryman PHEV
Smart For two EDMercedes GLC350e
Tesla Model SBMW i3 Rex
Citroen C0Volkswagen Golf GTE
Selection from EAFO [28].
Table 2. Scenarios at a glance.
Table 2. Scenarios at a glance.
ScenarioEV Trend‘TOT EV (Estim)’ 1Market Split (%)
In 2018 In 2030‘TOT BEV (Estim)’TOT PHEV
S1 (reference)Pessimistic44649,112
(2.8% of tot vehicles)
1000
S25050
S3Moderate446145.077
(8.3% of tot vehicles)
1000
S45050
S5Optimistic446254.267
(14.6% of tot vehicles)
1000
S65050
S7Extreme446415,323
(23.8% of tot vehicles)
1000
S85050
1 Authors elaboration from [29,41].
Table 3. Optimal ‘incentives rate’ considered for the eight scenarios.
Table 3. Optimal ‘incentives rate’ considered for the eight scenarios.
ScenarioOptimal ‘Incentives Rate’
S126%
S225.9%
S327.9%
S427.3%
S529.9%
S628.9%
S732.7%
S831.4%
Table 4. Percentage of EVs operating in the total vehicle fleet (‘TOT EV’).
Table 4. Percentage of EVs operating in the total vehicle fleet (‘TOT EV’).
Scenario2018202020252030
S1–S2Pessimistic0.02%0.15%1.00%3.06%
S3–S4Moderate0.02%0.35%2.71%8.57%
S5–S6Optimistic0.02%0.58%4.65%14.84%
S7–S8Extreme0.02%0.91%7.53%24.08%
Table 5. Main results cumulated to 2030 (absolute values).
Table 5. Main results cumulated to 2030 (absolute values).
Scenario# BEV ExtraPublic Health Monetary Savings Cumulative (M€)CO2 Saved Cumulative (Mt)
S1215973.60.858
S2212972.30.850
S3231884.770.918
S4226280.940.893
S5248797.470.985
S6239690.770.941
S72712116.21.084
S82583105.31.012
Table 6. Main results cumulated to 2030 (counterfactual analysis with reference to S1).
Table 6. Main results cumulated to 2030 (counterfactual analysis with reference to S1).
Scenario# BEV ExtraPublic Health Monetary Savings Cumulative (M€)CO2 Saved Cumulative (Mt)
S2 vs. S1−30−1.3−0.008
S3 vs. S115911.170.060
S4 vs. S11037.340.035
S5 vs. S132823.870.127
S6 vs. S123717.170.083
S7 vs. S155342.60.226
S8 vs. S142431.70.154
Table 7. Percentage increase of the simulation results in the 100% BEVs scenarios with respect to the fifty-fifty ones (50% BEVs). The table refers to counterfactual results presented in Table 6.
Table 7. Percentage increase of the simulation results in the 100% BEVs scenarios with respect to the fifty-fifty ones (50% BEVs). The table refers to counterfactual results presented in Table 6.
Scenario# BEV ExtraPublic Health Monetary Savings Cumulative (M€)CO2 Saved Cumulative (Mt)
Moderate (S3 vs. S4)+35%+34%+42%
Optimistic (S5 vs. S6)+28%+28%+35%
Extreme (S7 vs. S8)+23%+26%+32%

Share and Cite

MDPI and ACS Style

Pautasso, E.; Osella, M.; Caroleo, B. Addressing the Sustainability Issue in Smart Cities: A Comprehensive Model for Evaluating the Impacts of Electric Vehicle Diffusion. Systems 2019, 7, 29. https://0-doi-org.brum.beds.ac.uk/10.3390/systems7020029

AMA Style

Pautasso E, Osella M, Caroleo B. Addressing the Sustainability Issue in Smart Cities: A Comprehensive Model for Evaluating the Impacts of Electric Vehicle Diffusion. Systems. 2019; 7(2):29. https://0-doi-org.brum.beds.ac.uk/10.3390/systems7020029

Chicago/Turabian Style

Pautasso, Elisa, Michele Osella, and Brunella Caroleo. 2019. "Addressing the Sustainability Issue in Smart Cities: A Comprehensive Model for Evaluating the Impacts of Electric Vehicle Diffusion" Systems 7, no. 2: 29. https://0-doi-org.brum.beds.ac.uk/10.3390/systems7020029

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop