[1]
J. Zang, R. Yang, Y. Hu, G. Ding, Y. Xu, J. Niu, Dynamic characteristics research of a Steel/CFRP drive shaft, Adv. Mech. Eng. 2013(2013) Article ID 609309 9 pages.
DOI: 10.1155/2013/609309
Google Scholar
[2]
P. Woizeschke, V. Wottschel, Recent developments for laser beam joining of CFRP-aluminum structures, Procedia Mater. Sci. 2(2013) 250-258.
DOI: 10.1016/j.mspro.2013.02.031
Google Scholar
[3]
M. Ueda, S. Miyake, H. Hasegawa and Y. Hirano, Instantaneous mechanical fastening of quasi-isotropic CFRP laminates by a self-piercing rivet, Compos. Struct. 94(2012) 3388-3393.
DOI: 10.1016/j.compstruct.2012.04.027
Google Scholar
[4]
R.W. Messler, Trends in key joining technologies for the twenty-first century, Assembly Autom. 20(2000) 118-128.
DOI: 10.1108/01445150010321733
Google Scholar
[5]
J. Varis, Economics of clinched joint compared to riveted joint and example of applying calculations to a volume product, J. Mater. Proces. Technol. 172(2006) 130-138.
DOI: 10.1016/j.jmatprotec.2005.09.009
Google Scholar
[6]
C.J. Lee, J.Y. Kim, S.K. Lee, D.C. Ko, B.M. Kim, Design of Mechanical Clinching Tools for Joining of Aluminum Alloy Sheets, Mater. Design 31(2010) 1854-1861.
DOI: 10.1016/j.matdes.2009.10.064
Google Scholar
[7]
M. Oudjene, L. Ben-Ayed, On the parametrical study of clinch joining of metallic sheets using the Taguchi method, Eng. Struct. 30(2008) 1782-1788.
DOI: 10.1016/j.engstruct.2007.10.017
Google Scholar
[8]
Y. Abe, A. Matsuda, T. Kato, K. Mori, Plastic Joining of Aluminium Alloy and High Strength Steel Sheets by Mechanical Clinching, Steel Res. Int. 79(2008) 649-656.
Google Scholar
[9]
F. Lambiase, A.D. Ilio, Optimization of the clinching tools by means of integrated FE-modeling and artificial intelligence techniques, Procedia CIRP 12(2013) 163-168.
DOI: 10.1016/j.procir.2013.09.029
Google Scholar
[10]
C.J. Lee, J.Y. Kim, S.K. Lee, D.C. Ko, B.M. Kim, Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets, Int. J. Mech. Sci. 24(2010) 123-126.
DOI: 10.1007/s12206-009-1118-5
Google Scholar
[11]
ASTM D3171, Standard Test Methods for Constituent Content of Composite Materials, ASTM International, American Society for Testing and Materials(2006).
Google Scholar
[12]
ASTM D792, Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement, American Society for Testing and Materials(2000).
Google Scholar
[13]
ASTM-D3039, Standard test method for tensile properties of polymer matrix composite materials, American Society for Testing and Materials(2008).
Google Scholar
[14]
N.S. Ahn, C.J. Lee, J.M. Lee, D.C. Ko, S.B. Lee, B.M. Kim, Joining of high-strength steel and Al6061 sheet using hole clinching process, Trans. Kor. Soc. Mech. Eng. A 36(2012) 691-698.
DOI: 10.3795/ksme-a.2012.36.6.691
Google Scholar
