[1]
Z. Krstic, V.D. Krstic, Silicon nitride: the engineering material of the future, J. Mater. Sci. 47 (2012) 535-552.
DOI: 10.1007/s10853-011-5942-5
Google Scholar
[2]
J. Deckers, J. Vleugels, J.P. Kruth, Additive manufacturing of ceramics: A review. J. Ceram. Sci. Technol. 5 (2014) 245-260.
Google Scholar
[3]
N. Travitzky, A. Bonet, B. Dermeik, T. Fey, I. Filbert-Demut, L. Schlier, T. Schlordt, P. Greil, Additive manufacturing of ceramic-based materials, Adv. Eng. Mater. 16 (2014) 729-754.
DOI: 10.1002/adem.201400097
Google Scholar
[4]
S.J. Rodrigues, R.P. Chartoff, D.A. Klosterman, M. Agarwala, N. Hecht, Solid freeform fabrication of functional silicon nitride ceramics by laminated object manufacturing, Proceedings of the SFF Symposium, Texas, 2000, on https: /sffsymposium. engr. utexas. edu/Manuscripts/2000/ 2000-01-Rodrigues. pdf.
Google Scholar
[5]
S. Liu, F. Ye, L. Liu, Q. Liu, Feasibility of preparing of silicon nitride ceramics components by aqueous tape casting in combination with laminated object manufacturing, Mater. Des. 66 (2015) 331-335.
DOI: 10.1016/j.matdes.2014.10.079
Google Scholar
[6]
H. -C. Liu, S. Lee, S. Kang, C.F. Edwards, F.B. Prinz, RP of Si3N4 burner arrays via assembly mould SDM, Rapid Prototyping J. 10 (2004) 239-246.
DOI: 10.1108/13552540410551360
Google Scholar
[7]
S. Iyer, J. McIntosh, A. Bandyopadhyay, N. Langrana, A. Safari, S.C. Danforth, R.B. Clancy, C. Gasdaska, P.J. Whalen, Microstructural characterization and mechanical properties of Si3N4 formed by fused deposition of ceramics, Int. J. Appl. Ceram. Technol. 5 (2008).
DOI: 10.1111/j.1744-7402.2008.02193.x
Google Scholar
[8]
B. Cappi, E. Özkol, J. Ebert, R. Telle, Direct inkjet printing of Si3N4: characterization of ink, green bodies and microstructure, J. Europ. Ceram. Soc. 28 (2008) 2625-2628.
DOI: 10.1016/j.jeurceramsoc.2008.03.004
Google Scholar
[9]
B. Cappi, J. Ebert, R. Telle, Rheological properties of aqueous Si3N4 and MoSi2 suspensions tailor-made for direct inkjet printing, J. Amer. Ceram. Soc. 94 (2011) 111-116.
DOI: 10.1111/j.1551-2916.2010.04052.x
Google Scholar
[10]
W. Duan, X. Yin, F. Cao, Y. Jia, Y. Xie, P. Greil, N. Travitzky, Absorption properties of twinned SiC nanowires reinforced Si3N4 composites fabricated by 3D-printing, Mater. Lett. 159 (2015) 257-260.
DOI: 10.1016/j.matlet.2015.06.106
Google Scholar
[11]
X. Li, L. Zhang, X. Yin, Microstructure and mechanical properties of three porous Si3N4 ceramics fabricated by different techniques, Mater. Sci. Eng. A. 549 (2012) 43-49.
DOI: 10.1016/j.msea.2012.03.114
Google Scholar
[12]
X. Li, L. Zhang, X. Yin, Effect of chemical vapor infiltration of Si3N4 on the mechanical and dielectric properties of porous Si3N4 ceramic fabricated by a technique combining 3-D printing and pressureless sintering, Scr. Mater. 67 (2012).
DOI: 10.1016/j.scriptamat.2012.05.030
Google Scholar
[13]
L. Rabinskiy, A. Ripetsky, S. Sitnikov, Y. Solyaev, R. Kahramanov, Fabrication of porous silicon nitride ceramics using binder jetting technology, IOP Conf. Series: Mater. Sci. Eng. 140 (2016) 012023.
DOI: 10.1088/1757-899x/140/1/012023
Google Scholar
[14]
L.N. Rabinskiy, A.V. Ripetsky, V.A. Pogodin, S.A. Sitnikov, Y.O. Solyaev, Study of Porous Ceramic Based on Silicon Nitride Prepared Using Three-Dimensional Printing Technology, Refract. Ind. Ceram. 57 (2017) 600-604.
DOI: 10.1007/s11148-017-0030-2
Google Scholar
[15]
I. Gibson, D.W. Rosen, B. Stucker, Additive manufacturing technologies: 3D-printing, rapid prototyping, and direct digital manufacturing, Springer, New York, (2013).
DOI: 10.1007/978-1-4939-2113-3
Google Scholar
[16]
N. Guo, M. C Leu, Additive manufacturing: Technology, applications and research needs, Front. Mech. Eng. 8 (2013) 215-243.
DOI: 10.1007/s11465-013-0248-8
Google Scholar
[17]
Z.C. Eckel, C. Zhou, J.H. Martin, A.J. Jacobsen, W.B. Carter, Additive manufacturing of polymer-derived ceramics. Science. 351 (2016) 3-7.
DOI: 10.1126/science.aad2688
Google Scholar
[18]
Y. Bai, G. Wagner, C.B. Williams, Effect of Bimodal Powder Mixture on Powder Packing Density and Sintered Density in Binder Jetting of Metals, 2015 Annual International Solid Freeform Fabrication Symposium, 62, 2015, pp.758-771.
Google Scholar
[19]
S. Shrestha, G. Manogharan, Optimization of Binder Jetting Using Taguchi Method, JOM. 69 (2017) 491-497.
DOI: 10.1007/s11837-016-2231-4
Google Scholar
[20]
H. Chen, H. Chen, Y.F. Zhao, Y.F. Zhao, Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process, Rapid Prototyping J. 22 (2016) 527-538.
DOI: 10.1108/rpj-11-2014-0149
Google Scholar
[21]
J.A. Gonzalez, J. Mireles, Y. Lin, R.B. Wicker, Characterization of ceramic components fabricated using binder jetting additive manufacturing technology, Ceram. Int. 42 (2016) 10559-10564.
DOI: 10.1016/j.ceramint.2016.03.079
Google Scholar
[22]
Open source 3DP 3D printer Plan B on http: /ytec3d. com/plan-b.
Google Scholar
[23]
Z. -Z. Yi, Z. -P. Xie, J. -T. Ma, Y. Huang, Y. -B. Cheng, Study on gelcasting of silicon nitride-bonded silicon carbide refractories, Mater. Lett. 56 (2002) 895-900.
DOI: 10.1016/s0167-577x(02)00633-x
Google Scholar
[24]
J. Yu, H. Wang, H. Zeng, J. Zhang, Effect of monomer content on physical properties of silicon nitride ceramic green body prepared by gelcasting, Ceram. Int. 35 (2009) 1039-1044.
DOI: 10.1016/j.ceramint.2008.04.021
Google Scholar