Adhesive Strength of Pilot-Scale-Produced Water-Washed Cottonseed Meal in Comparison with a Synthetic Glue for Non-Structural Interior Application


  •  Zhongqi He    
  •  Fabio Chiozza    

Abstract

Water-washed cottonseed meal (WCSM) has been shown the potential to be used as renewable and environment- friendly adhesives in wood products industry. Recently, WCSM was produced from defatted meal in a pilot scale. In this study, we initially compare the adhesive strength of the pilot-produced WCSM with that of a synthetic glue Vinavil 2259 L. WCSM may be used as the conventional D1 wood adhesives for nonstructural interior application per European standard EN204/205. Non-structural D3 type adhesives is more widely used in protected outside. Under the testing conditions, WCSM possessed very high heat resistance according to European standard EN14257 (WATT 91)-adhesive strength after 1 hour at 80°C. However, the dry strength (EN204/205) and water resistance (specimen were put in water for 4 days and then pulled in the dynamometer) of WCSM were lower than those of the synthetic glue Vinavil 2259 L. Blending WCSM with Vinavil 2259 L improved the water resistance of WCSM, allowing the classification of the WCSM adhesive as D3. Further work will be focused on the increase of solid content of the final adhesive slurries and the improvement of their water resistance.



This work is licensed under a Creative Commons Attribution 4.0 License.
  • ISSN(Print): 1927-0585
  • ISSN(Online): 1927-0593
  • Started: 2012
  • Frequency: semiannual

Journal Metrics

The data was calculated based on Google Scholar Citations

Google-based Impact Factor (2021): 0.52
h-index (December 2021): 22
i10-index (December 2021): 74
h5-index (December 2021): N/A
h5-median (December 2021): N/A

Learn more

Contact