Next Article in Journal
Model Predictive Control of COVID-19 Pandemic with Social Isolation and Vaccination Policies in Thailand
Next Article in Special Issue
Brain Tumor Classification Using Dense Efficient-Net
Previous Article in Journal / Special Issue
On the Composition of Overlap and Grouping Functions
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Basic Core Fuzzy Logics and Algebraic Routley–Meyer-Style Semantics

Department of Philosophy & Institute of Critical Thinking and Writing, Colleges of Humanities & Social Science Blvd., Jeonbuk National University, Rm 417, Jeonju 54896, Korea
Submission received: 21 September 2021 / Revised: 16 October 2021 / Accepted: 21 October 2021 / Published: 25 October 2021

Abstract

:
Recently, algebraic Routley–Meyer-style semantics was introduced for basic substructural logics. This paper extends it to fuzzy logics. First, we recall the basic substructural core fuzzy logic MIAL (Mianorm logic) and its axiomatic extensions, together with their algebraic semantics. Next, we introduce two kinds of ternary relational semantics, called here linear Urquhart-style and Fine-style Routley–Meyer semantics, for them as algebraic Routley–Meyer-style semantics.

1. Introduction

The author [1] recently introduced algebraic Routley–Meyer-style (ARM for simplicity) semantics for basic substructural logics. Here, the term ARM semantics means semantics with operations interpreting ternary relations, the frames of which have the same structures as algebraic semantics. This paper extends it to fuzzy logics. To this end, we first recall some historical facts associated with Routley–Meyer semantics.
Using binary accessibility relations, Kripke [2,3,4] first established relational semantics, the so-called Kripke Semantics, for modal and intuitionistic logics. Since then, many semantics have been introduced as its generalizations. In particular, Urquhart provided operational semantics, called Urquhart semantics in [1]; for relevant implication see [5,6,7]. From an operational semantic point of view, this semantics is interesting since instead of binary relations for accessibility it has groupoid operations. More precisely, it provides the valuation of implication using the binary operation ∘ such that
(→∘U)
a A B if and only if (iff) for any b X , b A implies a b B ,
instead of using the binary relation R such that
(→RK)
a A B iff for any b X , a R b and b A imply b B .
Urquhart semantics has the following additional valuations for extensional conjunction and disjunction: For sentences A , B ,
(∧)
a A B iff a A and a B ; and
(∨)
a A B iff a A or a B .
As is well known, these three valuation conditions do not work together for substructural logics in general. As Urquhart himself mentioned in [7,8], while sentences such as (a) ( ( A ( B C ) ) ( B C ) ) ( A C ) are valid in their semantics, the distributive substructural logic R of relevance does not prove such sentences. Because of this negative fact, Routley–Meyer [9,10,11] instead introduced the so-called Routley–Meyer semantics for implication as a ternary relational semantics (see [12]).
Please note that Urquhart [7] provided the binary operational valuation for implication ( U ), whereas Fine [13] did the following ternary relational valuation for implication.
(→∘F)
a A B iff for all b , c X , a b c and b A imply c B .
Although these two valuations are not free from the above negative fact, they have been extensively used in substructural logics: Using ( U ), many logicians such as Do s ˇ en and Ono have introduced similar semantics for modal and substructural logics [14,15,16]; with the title “Kripke-style semantics”, Montagna–Ono [17], Montagna–Sacchetti [18], and Yang [19,20] introduced similar semantics for substructural fuzzy logics. Using ( F ), logicians such as Ono–Komori [21], Ishihara [22], and Kamide [23] have introduced analogous semantics for some (modal) substructural logics (For more detailed introduction of these semantics, see [1]).
The starting point for the current work is the observation that, as the author [1] mentioned, using ternary relation R a b c , the valuations ( U ) and ( F ) can be rephrased as:
(→RU)
a A B iff for all b , c X , if R a b c (:= a b = c (df U )) and b A , then c B , (We take c in place of a b in a b B because a b = c . This was introduced by Dunn in [24]) and
(→RF)
a A B iff for all b , c X , if R a b c (:= a b c (df F )) and b A , then c B , (As Do s ˇ en [15] and Dunn [25,26] already mentioned, Fine [13] interpreted R a b c as a b c . Although Urquhart [7] did not consider to reinterpret ( U ) using ternary relation, Bimbó and Dunn [27] and Restall [12] introduced such reformulation.), respectively.
In particular, using ( R U ) and ( R F ), the author first introduced ARM semantics for basic substructural logics in general. Then, since fuzzy logics are also substructural logics and further prove sentences such as (a), one can ask the following.
 Q:
Could one establish ARM semantics, i.e., operational and ternary relational semantics equivalent to algebraic semantics, for basic substructural fuzzy logics, using the clauses (∧), (∨), and either ( R U ) or ( R F ) together?
As a positive answer to this question, we introduce such semantics with the conditions (∧), (∨) and the corresponding implication conditions for basic (core) fuzzy logics. (A logic L is called fuzzy if it is complete on linearly ordered models, and core fuzzy if it is fuzzy on [ 0 , 1 ] (see [28,29])). This will verify that the clauses (∧), (∨), and either ( R U ) or ( R F ) work together for basic substructural fuzzy logics.
The more detailed other reasons to study this are as follows: The first and most important reason is that while algebraic Kripke-style (briefly AK) semantics (The term AK semantics means semantics with operations in place of binary accessibility relations, the frames of which have the same structures as algebraic semantics.) for substructural fuzzy logics have been introduced extensively (see, e.g., [17,18,19,20,30,31,32]), ARM semantics for such logics have not. Only, the author [33,34] introduced such semantics for MTL (Monoidal t-norm logic) and its involutive extension IMTL. In particular, the author [1] introduced ARM semantics for substructural logics in general, whereas he did not for substructural fuzzy logics. This is the direct specific reason to consider ARM semantics for fuzzy logics in general.
The following are more reasons related to ARM semantics itself, some of which are mentioned in [1]. First, “the definitions (df U ) and (df F ) provide more intuitive ways to understand or interpret the ternary relation R. Please note that using the ternary relation R in R x y z itself we cannot say how to understand or interpret R, whereas we can say it using x y = z and x y z ”. Second, this semantics provides a direct way to understand equivalence relations between algebraic and relational semantics. “An n-ary operation is an n+1-ary relation, but not always conversely. If one shows its converse, one can state an equivalence between the operation and the relation”. Associated with this, most well-known method to consider this equivalence is to use `canonical extensions’ investigated with the titles such as `representation’ and `duality’ (see [35,36,37,38,39,40,41]). However, the way to use (df U ) and (df F ) is different from it and more direct in the sense that the way defines ternary relations by virtue of binary operations and (in)equations. The third is the fact that ARM semantics uses forcing relations. It means that this semantics is a study still in the tradition of relational semantic research. The last but not least one is that ARM semantics is a common area between algebraic semantics and ternary relational semantics. Since algebraic semantics and ARM semantics are both based on the same algebraic structures, this last semantics gives a chance to study similarities and differences between algebraic semantics and relational semantics.
We organize the paper as follows. In Section 2, we first recall some basic (core) fuzzy logics, together with their algebraic semantics. In Section 3, we introduce ARM semantics for them. More precisely, we introduce ARM semantics with ( R U ) in Section 3.1 and that with ( R F ) in Sectio Section 3.2. In Section 4, we consider advantages and limitations of these two semantics as ARM semantics.
We finally note that, as in [1], our ARM semantics in Section 3.1 and Section 3.2 provides frames as some reducts of their corresponding algebras and defines ternary relations using binary operations and (in)equations. However, unlike the semantics in [1], this semantics is provided based on linear theories. More precisely, it is an ARM semantics with linearly ordered models. In this sense, this semantics is a novel one to connect n-nary operations and n+1-nary relations. By ARM semantics, we henceforth mean this kind of ARM semantics.

2. Algebraic Semantics for Basic Core Fuzzy Logics

Here we recall the most basic substructural core fuzzy logic MIAL and its axiomatic extensions (extensions for short) and their algebraic semantics (See [42] for more detailed introduction of these logics and semantics). The language for these logics is provided over a countable propositional language with Fm (a set of formulas) built from VAR (a set of propositional variables), propositional constants t, f, F , T , and connectives →, ⇝, ∧, ∨, &. We further define A B and A t as ( A B ) ( B A ) and A t , respectively.
The variables are denoted by lowercase Latin letters p , q , r , and the formulas by uppercase ones A , B , C . Theories as sets of formulas are denoted by uppercase Greek letters Γ , Δ , . Please note that variables are also formulas. We provide a consequence relation, denoted by ⊢, on axiom systems.
Definition 1
([43,44]). MIAL consists of the axioms and rules below:
( A B ) A , ( A B ) B (∧-elimination, ∧-E);
( ( A B ) ( A C ) ) ( A ( B C ) ) (∧-introduction, ∧-I);
A ( A B ) , B ( A B ) (∨-introduction, ∨-I);
( ( A C ) ( B C ) ) ( ( A B ) C ) (∨-elimination, ∨-E);
F A (ex falsum quodlibet, EF);
( t A ) A (push and pop, PP);
A ( B ( B & A ) ) (&-adjunction, &-Adj);
A ( B ( A & B ) ) (&-adjunction, &-Adj );
( A t & B t ) ( A B ) ( & );
( B & ( A & ( A ( B C ) ) ) ) C (residuation, Res );
( ( A & ( A ( B C ) ) ) & B ) C (residuation, Res );
( ( A ( A & ( A B ) ) ) & ( B C ) ) ( A C ) (transitivity, T );
( ( A ( ( A B ) & A ) ) & ( B C ) ) ( A C ) (transitivity, T );
( A B ) t ( ( C & D ) ( C & ( D & ( B A ) t ) ) ) (prelinearity, PL α C , D );
( A B ) t ( ( C & D ) ( ( C & ( B A ) t ) & D ) ) (prelinearity, PL α C , D );
( A B ) t ( ( C ( D ( ( D & C ) & ( B A ) t ) ) ) (prelinearity, PL β C , D );
( A B ) t ( ( C ( D ( ( C & D ) & ( B A ) t ) ) ) (prelinearity, PL β C , D );
A B , A B (modus ponens, mp);
A A t (adj U );
A ( C & D ) ( C & ( D & A ) ) (α);
A ( C & D ) ( ( C & A ) & D ) ( α );
A C ( D ( ( D & C ) & A ) ) (β);
A C ( D ( ( C & D ) & A ) ) ( β ).
A logic is called an extension of a logic L if it is obtained from L by adding further axioms.
Definition 2.
The following are basic structural axioms:
(exchange, e) A & B B & A ;
(expansion, p) ( A & A ) A ;
(contraction, c) A ( A & A ) ;
(left weakening, i) A ( B A ) ;
(right weakening, o) f A ;
(associativity, a) A & ( B & C ) ( A & B ) & C .
MIAL S , S { e , p , c , i , o , a } , is a substructural (core) fuzzy logic extendingMIAL .
Example 1.
The following well-known core fuzzy logics are extensions ofMIAL .
 (1)
Micanorm logicMICALisMIALe.
 (2)
Uninorm logicULisMIALea.
 (3)
Monoidal t-norm logicMTLisMIALeai.
By L s, we denote the set of substructural fuzzy logics introduced in Definition 2, i.e., L s = { MIAL S : S { e , p , c , i , o , a } } .
A theory of L L s ( L -theory for short) is a set Γ of formulas such that Γ L A entails A Γ . Since Γ , the set of theorems of L is a subset of all L -theories. We define a proof in an L -theory Γ as a sequence of formulas, the elements of which are either axioms of L , members of Γ , or derived from its precedent elements using rules of L . For each pair of formulas A , B and a theory Γ , if Γ A B or Γ B A , we call Γ a linear theory.
Definition 3.
Abounded, pointed residuated lattice-ordered groupoid with unit ( b p r l u -groupoid for simplicity) is an algebra A = ( A , ⊥, ⊤, 0, 1, ∖, /, , , ) such that: ( A , , 1 ) is a unital groupoid; ( A , ⊥, ⊤, ∧, ) is a bounded lattice; 0 is an arbitrary element in A; for all a , b , c A , a b c iff a c / b iff b a c (residuation).
Please note that the notations `∧’ and `∨’ are used both as propositional connectives and as algebraic operators.
Definition 4
( a l g e b r a s ). Let a 1 be a 1 . A b p r l u -groupoid is aMIAL-algebra if it satisfies the following prelinearity properties: for all a , b , c , d A ,
(PL α C , D A ) 1 ( a b ) 1 ( ( c d ) ( c ( d ( b a ) 1 ) ) ) ;
(PL α C , D A ) 1 ( a b ) 1 ( ( c d ) ( ( c ( b a ) 1 ) d ) ) ;
(PL β C , D A ) 1 ( a b ) 1 ( ( c ( d ( ( d c ) ( b a ) 1 ) ) ) ;
(PL β C , D A ) 1 ( a b ) 1 ( ( c ( ( ( d c ) ( b a ) 1 ) / d ) ) .
The following are the (in)equations corresponding to the structural axioms above: for all a , b , c A ,
( e A ) a b b a ;
( p A ) a a a ;
( c A ) a a a ;
( i A ) a 1 ;
( o A ) 0 a ;
( a A ) a ( b c ) = ( a b ) c .
Thus, for any S { e A , p A , c A , i A , o A , a A } , MIAL S -algebras are defined with S. We call all these algebras L -algebras and linearly ordered L -algebras L -chains.
Given an L -algebra A , an A -valuation is defined as a map v : F m A such that v ( # ( A 1 , , A n ) ) = # A ( v ( A 1 , , A n ) ) , where #∈ {F, T, f, t, →, ⇝, ∧, ∨, &} and # A ∈ {⊥, ⊤, 0, 1, ∖, /, ∧, ∨, ∘}. A formula A is said to be an A -tautology if for each A -valuation v, 1 v ( A ) . An A -valuation v is said to be an A -model of an L -theory Γ if 1 v ( A ) for all A Γ . By Mod(Γ, A ), we denote the class of all A -models of Γ . Over a class L of L -algebras, a formula A is called a semantic consequence of Γ , denoted by Γ L A , if M o d ( Γ { A } , A ) = M o d ( Γ , A ) for all A L . If A is a semantic consequence of Γ with respect to regarding { A } whenever A is provable in Γ on L , A is called an L -algebra. By MOD( L ) and MOD ( L ), we denote the set of such algebras and the set of linearly ordered ones, respectively, and write Γ L A and Γ L A instead of Γ M O D ( L ) A and Γ M O D ( L ) A , respectively.
Theorem 1
( C o m p l e t e n e s s ). For a theory Γ over L L s and a formula A, Γ L A iff Γ L A iff Γ L A .
Proof. 
As a corollary of Theorem 3.1.8 in [45], we obtain the claim. □
An L -algebra is said to be standard if it has the real interval [ 0 , 1 ] as its carrier set.
Theorem 2
([42]). Let ε be a unit element in [ 0 , 1 ] .
 (i)
For L L T = { MIAL T : T { e , p , c , i , o } } , Γ L A iff for each standard L -algebra and for each valuation v, ε v ( B ) for all B Γ implies ε v ( A ) .
 (ii)
For L L U such that { i , a } U { e , p , c , i , o , a } , Γ L A iff for each standard L -algebra and for each valuation v, ε v ( B ) for all B Γ implies ε v ( A ) .
Example 2.
For L { MIAL a , MIAL a c , MIAL a p , MIAL a o , MIAL a c o , MIAL c p o , MIAL a c p o }, L is not standard complete since (A) 1 ( z y ) ( ( x y ) ( 1 / ( z a ) ) ) or (B) x y 1 iff y x 1 holds in standard L -algebras but not in general in linearly ordered L -algebras (see [42,46]).

3. ARM Semantics

In this section, we deal with the ARM semantics for fuzzy extensions of the basic substructural logics introduced in [1]. As in [1], we introduce two kinds of ARM semantics: one is the semantics with the definition (df U ) and linearly ordered models, called here linear Urquhart-style Routley–Meyer semantics (briefly U-RM semantics), and the other is the semantics with the definition (df F ) below and linearly ordered models, called here linear Fine-style Routley–Meyer semantics (briefly F-RM semantics). Please note that unlike the semantics in [1], these two semantics are provided using linear theories in place of closed theories. However, these semantics still have the same structures as algebraic semantics and so are ARM semantics.

3.1. U-RM Semantics

Here we consider U-RM semantics for L e q = { MIAL e q : e q { e , o , a } } . We first define several Routley–Meyer (RM for short) frames.
Definition 5.
 (i)
(RM frames [1]) AnRM frameis a structure F = ( F , 1 , R ) such that 1 is a special element in F and R F 3 . We call the elements of F nodes.
 (ii)
(Linear RM frames) Alinear RM (briefly, RM ) frameis an RM frame F = ( F , 1 , , R ) , where ( F , ) is a linearly order set.
 (iii)
((Residuated) Urquhart operational RM frames) AnUrquhart operationalRM (briefly, U-RM ) frame is an RM frame F = ( F , 1 , , , R ) , where ∘ is a groupoid operation satisfying (df U ) a b = c := R a b c . A U-RM frame is calledresiduatedif for any a , b F , the sets { c : a c b } and { c : c a b } have suprema.
 (iv)
(Bounded, pointed U-RM frames) AU-RM frameis said to bepointedif it further has an arbitrary element 0, andboundedif it further has top and bottom elements ⊤ and ⊥.
 (v)
(U-RM MIAL frames) AU-RM MIAL frameis a bounded pointed residuated U-RM frame, where ∘ is left-continuous and conjunctive and R satisfies the postulates below: for any a F ,
 p1.
R 1 a a
 p2.
R a 1 a .
 (vi)
(U-RM L e q frames) Consider the definitions and postulates below: for any a , b , c , d F ,
 df1.
R 2 a ( b c ) d : = ( x ) ( R a x d R b c x )
 df2.
R 2 a b c d : = ( x ) ( R a b x R x c d )
 pe.
R a b c implies R b a c .
 po.
R 10 a iff R 1 a , where ⊥ is the bottom element in F.
 pa.
R 2 a b c d iff R 2 a ( b c ) d .
For any e q { p e , p o , p a } ,U-RM MIAL e q framesare defined, along with their corresponding postulates. We call all these framesU-RM L e q frames(briefly U- L e q frames).
Remark 1.
Definition 1 has some interesting facts to note.
 (1)
([1]) The definition of an RM frame in ( i ) is the same as that of a frame structure forR + (the positiveR), which eliminates all the definitions and postulates for the ternary relation R introduced in [8].
 (2)
The definitions in ( i i ) and ( i i i ) are a fuzzy specification of partially ordered RM frames and (residuated) Urquhart operational RM frames introduced in [1]. (Please note that if ≤ is a partial ordering in place of a linear ordering in ( i i ) and ( i i i ) , the definitions in ( i i ) and ( i i i ) form partially ordered RM frames and (residuated) Urquhart operational RM frames introduced in [1].)
 (3)
([1]) The postulates p 1 and p 2 in ( v ) are for a unit element since we have that 1 a = a = a 1 using (df U ).
 (4)
([1]) The indices of the postulates in ( v i ) denote their corresponding axioms. For example, the postulate p e is for the exchange axiom e. In particular, (df U ) assures that the postulates satisfy the equational forms of their corresponding algebraic properties. For instance, using the postulate p o and (df U ), we have that 0 = 1 0 = 1 = , i.e., 0 = .
A valuation on a bounded pointed residuated U-RM frame is a forcing relation ⊩ between the nodes and the propositional variables, propositional constants, and formulas satisfying the below conditions. For each propositional variable p,
(AHC)
b a and a p imply b p ;
(min)
p ,
for the propositional constants f , t , and F,
(0)
a f iff a 0 ;
(1)
a t iff a 1 ;
(⊥)
a F iff a = , and
for formulas A , B ,
(→)
a A B iff for all b , c F , R b a c and b A imply c B ;
(⇝)
a A B iff for all b , c F , R a b c and b A imply c B ;
(∧)
a A B iff a A and a B ;
(∨)
a A B iff a A or a B ;
(&)
a A & B iff there exist b , c F such that b A , c B , and a b c .
A valuation on a U- L e q frame is a valuation further satisfying that (max) for every propositional variable p, { a : a p } has a maximum.
Definition 6
( U- L e q model). An U- L e q model is a pair ( F , ) , where F is a U- L e q frame and ⊩ is a valuation on F . This model is said to be complete if F is a complete frame and ⊩ is a valuation on F .
Definition 7.
For a U- L e q model ( F , ) , a node a of F and a formula A, a is said toforce Aif a A . A is said to betruein ( F , ) if 1 A , andvalidin the frame F if A is true in ( F , ) for any valuation ⊩ on F . For a class UL of U- L e q frames and for a theory Γ, by Γ UL A , we mean that A is valid in F UL whenever B is valid in it for all B Γ . This A is called asemantic consequenceof Γ on UL .
Now we consider soundness and completeness of L e q .
Lemma 1
(Hereditary Lemma).
 (i)
Let F be a residuated U- R M frame. For any formula A and for any nodes a , b F , if a A and b a , then b A .
 (ii)
Let ⊩ be a forcing relation on a U- L e q frame and A be a formula. Then the set { a F : a A } has a maximum.
Proof. 
It is easy to prove ( i ) . For the proof of ( i i ) , see Proposition 3.3 in [30] and Lemma 2.11 in [18]. □
Lemma 2.
1 A B iff for any a F , a A implies a B .
Proof. (⇒) See Lemma 3 in [1]. (⇐) Suppose R a 1 b and a A and that a A implies a B . We prove b B . Using the suppositions and (df U ), we obtain that a B and a = a 1 = b ; therefore, b B . □
Theorem 3
(Soundness).For a linear theory Γ over L L e q , a formula A, and a class UL of all U- L e q frames, Γ L A only if Γ UL A .
Proof. 
For the system MIAL, we consider the axiom ( E F ) as an example. For ( E F ) , by Lemma 2, we assume that a F and show that a A . This result directly follows from the supposition and the condition (⊥). The other axioms and rules for MIAL can be proved similarly.
For the other systems, we need to consider the other structural axioms, i.e., S { e , o , a } .
(e): Suppose that a A & B . We have to prove that a B & A . By the supposition and the condition (&), there are b , c F such that b A , a b c , and c B . Then, p e and (df U ) ensure that b c = c b and so a c b . Hence, we obtain a B & A by (&).
(o): Suppose that a f . We have to prove a A . Please note that MIAL o proves F f . Then, since p o and (df U ) assure that 0 = , we can obtain that a A using (⊥) and ( E F ) .
(a): Suppose a A & ( B & C ) . We have to prove a ( A & B ) & C . By the supposition, the condition (&), and (df U ), there are b , c F so that b A , a b c , and c B & C ; therefore, for some d , e , we have that d B , c d e , and e C . Then, b c b ( d e ) and so b c ( b d ) e since p a , df1, df2, and (df U ) assure that b ( d e ) = ( b d ) e . Since b d b d and a ( b d ) e , we may take some x so that a x e and x b d . Hence, by the condition (&), we obtain x A & B ; therefore, a ( A & B ) & C . The proof for the other direction is analogous. □
The following shows a connection between postulates for U- L e q frames and algebraic (in)equations for the structural axioms of L L e q .
Proposition 1.
The postulates for U- L e q frames introduced in Definition 1 as p e , p o , and p a are reducible to algebraic (in)equations e A , o A , and a A , respectively.
Proof. 
We show that p e q , e q { e , o , a } , is reducible to e q A .
(e): Using p e and (df U ), we obtain that for arbitrary a , b , c F , c = a b implies c = b a ; therefore, a b b a , i.e., e A , since a b = b a .
(o): Using p o and (df U ), we obtain that a = 1 0 = 0 iff a = 1 = for any a F and so 0 a , i.e., 0 A , since 0 = .
(a): Using p a , df1, df2, and (df U ), we obtain that for arbitrary a , b , c , d F , there is x such that x = a b and d = x c and thus d = ( a b ) c iff x = b c and d = a x for some x and so d = a ( b c ) ; therefore, ( a b ) c = a ( b c ) , i.e., a A . □
Corollary 1.
Every U- L e q , e q { o , e } , frame is embeddable into a complete U- L e q frame.
Proof. 
This corollary directly follows from Theorem 2 and Proposition 1. □
The next proposition connects algebraic semantics and U-RM semantics for L L e q .
Proposition 2.
 (i)
The { , , 1 , 0 , , } reduct of an L -chain A is a U- L e q frame, which is complete iff A is complete.
 (ii)
Let F = ( F , , , 1 , 0 , , ) be a U- L e q frame. Then, the structure A = (F, ⊤, ⊥, 1 , 0 , m i n , m a x , ∖, /, ∘) is an L -algebra (where m i n and m a x are meant on ≤).
 (iii)
If F is the { , , 1 , 0 , , } reduct of an L -chain A and v is a valuation in A , then ( F , ) is a U- L e q model and for any formula A and for any a A , it holds that a A iff a v ( A ) .
 (iv)
Let ( F , ) be a U- L e q model and A be the L -algebra defined as in ( i i ) . Define for every propositional variable p, v ( p ) = m a x { a F : a p } . Then, for every formula A, v ( A ) = m a x { a F : a A } .
Proof. 
Here we consider ( i i i ) because the proof for ( i ) and ( i i ) is easy and ( i v ) follows almost directly from ( i i i ) and Lemma 1 ( i i ) . We consider the induction steps, where A = B C and A = B C . For the induction step of A = B & C , see Proposition 3.9 in [33]. The proof for the other cases is easy.
Suppose A = B C . By the condition (→), a B C iff for any b , c F , R b a c and b B entail c C , hence by the induction hypothesis, iff for any b , c F , b a = c and b v ( B ) entail c v ( C ) and so iff v ( B ) a v ( C ) ; therefore, iff a v ( B ) v ( C ) = v ( B C ) by residuation. The proof for the case A = B C is analogous. □
Theorem 4
( C o m p l e t e n e s s ). Let Γ be a linear theory on L L e q , A a formula, and UL a class of all U- L e q frames.
 (i)
Γ L A iff Γ UL A .
 (ii)
Let L L e q , eq′ = { e , o } , and UL c a class of all complete U- L e q frames. Then, Γ L A iff Γ UL c A
Proof. 
( i ) follows from Proposition 2 and Theorems 1 and 3 and ( i i ) from Proposition 2 and Theorems 2 ( i ) and 3. □
Example 3.
Among the examples introduced in Example 1, the systemsMICALandULhave U-RM semantics butMTLdoes not since the postulates e , a are equationally definable by (df U ) but the postulate i is not. Therefore, we can say the following.
 (1)
Micanorm logicMICALhas a U-RM semantics.
 (2)
Uninorm logicULhas a U-RM semantics.
 (3)
Monoidal t-norm logicMTLdoes not have a U-RM semantics.
Please note that one is capable of defining the ternary relation R using (df U ) and the forcing relation ⊩ using ≤. This means that for L L e q , U-RM semantics can be considered in the context of algebraic semantics and vice versa.
As in [1], using the definition (df U ) and the valuation conditions (→) and (⇝), we can show the following derived conditions of a valuation.
Proposition 3
([1]).
 (1)
For any b F , b A implies b a B iff for any b , c F , R b a c and b A imply c B .
 (2)
For any b F , b A implies a b B iff for any b , c F , R a b c and b A imply c B .
Proposition 3 ensures that, as far as we accept (df U ), the conditions of a valuation are reducible to those of AK semantics for L e q . Thus, U-RM semantics for L e q can be reduced to the AK semantics for L e q with the definition (df U ). Therefore, this semantics can be called ARM semantics reducible to AK semantics.

3.2. F-RM Semantics

Here we consider F-RM semantics for L s. We first define some further RM frames.
Definition 8.
 (i)
(Operational RM frame [1]) An operational RM frameis a structure F = ( F , 1 , , , R ) , where ( F , 1 , R ) is an RM frame, ( F , 1 , ) is a groupoid with unit, and R satisfies the postulates below: for all a , b , c F ,
 ps.
R 1 a b and R 1 b a imply a = b ;
 pt.
R 1 a b and R 1 b c imply R 1 a c ;
 p.
a b iff R 1 b a .
 (ii)
((Residuated) Fine operational RM frame) Linear RM frames are defined as in Definition 5 ( i i ) . AFine operationalRM frame (F-RM frame for short) is an operational RM frame, where ∘ satisfies (df F ) a b c := R a b c (Notice that ≤ in (df F ) is considered order reversely. Please compare it with ≤ in (df F ).) and R satisfies the postulate below: for all a , b F ,
 p0.
R 1 a b or R 1 b a .
Residuated F-RM frames are defined as in Definition 5 ( i i i ) .
 (iii)
(Bounded, pointed F-RM MIAL frames) Bounded, pointed F-RM frames are defined as in Definition 5 ( i v ) . AnF-RM MIAL frameis a bounded pointed residuated F-RM frame, where ∘ is conjunctive and left-continuous.
 (iv)
(F- L frames) Consider the definitions and postulates df1, df2, p e , p o , p a and the below additional postulates: for all a , b , c , d F ,
 pp.
R a a b implies R 1 a b .
 pc.
R a a a
 pi.
R a b c implies R 1 b c .
For any S { p e , p p , p c , p i , p o , p a } ,F-RM MIAL S framesare defined, along with their corresponding postulates. We call all these framesF- L frames.
Remark 2.
 (1)
One is capable of showing that (F, ≤) is a linearly ordered set, using (df F ), identity a a , p s , p t , and p 0 in F-RM frames and so these frames are linearly ordered.
 (2)
([1]) The indices of the postulates in ( i v ) denote their corresponding axioms. For example, the postulate p p is for the expansion axiom p. Moreover, (df F ) assures that those postulates satisfy their corresponding algebraic properties.
The conditions for a valuation on an F- L frame are the same as in Section 3.1 except for the following:
(&R)
a A & B iff there exist b , c F so that R b c a , b A and c B .
We can prove Proposition 3 and the condition (&) using (df F ). Moreover, we can further show the following additional derived condition.
Proposition 4.
a v ( A ) v ( B ) iff there exist b , c F such that R c b a , b v ( A ) and c v ( B ) .
Proof. (⇒) Assume that a v ( A ) v ( B ) . We take b , c satisfying that b = v ( A ) and c = v ( B ) . Then, using (df F ), we can obtain that R c b a , b v ( A ) , and c v ( B ) . (⇐) Suppose that R c b a , b v ( A ) and c v ( B ) . Then, using (df F ), we obtain a b c , b v ( A ) , and c v ( B ) ; therefore, a v ( A ) v ( B ) . □
Notice that Lemmas 1 and 2 also hold for F- L frames and models.
Theorem 5 (Soundness)For a linear theory Γ over L L s, a formula A, and a class FL of all F- L frames, Γ L A only if Γ FL A .
Proof. 
We need to consider the structural axioms c , p , i . For c, we assume that a A and show that a A & A . By the supposition, p c , and (&), we obtain that a A & A . The proof for the other ones p , i is analogous. □
Now, we recall a connection between postulates for F- L frames and algebraic (in)equations for the structural axioms of L L s.
Proposition 5
([1]). The postulates for F- L frames introduced in Definition 1 are reducible to algebraic (in)equations for the structural axioms of L introduced in Definition 4.
The next proposition connects F-RM semantics and algebraic semantics for L s.
Proposition 6.
 (i)
The { , , 1 , 0 , , } reduct of an L -chain A is an F- L frame, which is complete iff A is complete.
 (ii)
Let F = ( F , , , 1 , 0 , , ) be an F- L frame. Then, the structure A = (F, ⊤, ⊥, 1 , 0 , m a x , m i n , ∘, ∖, /) is an L -algebra.
 (iii)
If F is the { , , 1 , 0 , , } reduct of an L -chain A and v is a valuation in A , then ( F , ) is an F- L model and for all formulas A and for all a A , we obtain that a A iff a v ( A ) .
 (iv)
Let ( F , ) be an F- L model and A be the L -algebra defined as in ( i i ) . Define for every propositional variable p, v ( p ) = m a x { a F : a p } . Then, for every formula A, v ( A ) = m a x { a F : a A } .
Proof. 
As above, we prove ( i i i ) . We consider the induction steps, where A = B & C , A = B C and A = B C , since the other cases can be easily proved.
Suppose A = B & C . The condition ( & R ) assures that a B & C iff there are b , c F so that b B , c C , and R b c a , hence by the induction hypothesis and (df F ), iff there are b , c F such that b v ( B ) , c v ( C ) , and a b c . It then holds true that a b c v ( B ) v ( C ) = v ( B & C ) . Conversely, suppose a v ( B ) v ( C ) = v ( B & C ) and take b = v ( B ) and c = v ( C ) . Then we can obtain b B , c C and a b c ; hence, a B & C by ( & R ) and (df F ).
Suppose A = B C . The condition (→) assures that a B C iff for all b , c F , R b a c and b B entail c C , hence by the induction hypothesis and (df F ), iff for all b , c F , c b a and b v ( B ) entail c v ( C ) . Then, we obtain a v ( B ) v ( C ) = v ( B C ) since c b a v ( B ) a v ( C ) . Suppose conversely that a v ( B ) v ( C ) = v ( B C ) . Then we have that v ( B ) a v ( C ) and so c v ( C ) for c b a and b v ( B ) . This ensures that R b a c and b B entail c C ; hence, a B C by (→).
The proof of the case A = B C is analogous to the case A = B C . □
Theorem 6
( C o m p l e t e n e s s ). Let Γ be a linear theory over L L s, A a formula, and FL a class of all F- L frames.
 (i)
Γ L A iff Γ FL A .
 (ii)
Let L be a member of L S = { MIAL S : S { e , p , c , i , o } } or L S such that { i , a } S { e , p , c , i , o , a } , and FL c a class of all complete F- L frames. Then, Γ L A iff Γ FL c A .
Proof. ( i ) follows from Proposition 6 and Theorems 1 and 5 and ( i i ) from Proposition 6 and Theorems 2 and 5. □
Example 4.
All the systems introduced in Example 1 have F-RM semantics since the postulates e , a , i are inequationally definable by (df F ). However, the non-fuzzy systemR + (the positiveR) does not have such semantics since, while F-RM semantics validates sentences such as ( a ) in Section 1, R + does not proves such sentences. Therefore, we can say the following.
 (1)
Micanorm logicMICALhas an F-RM semantics.
 (2)
Uninorm logicULhas an F-RM semantics.
 (3)
Monoidal t-norm logicMTLhas an F-RM semantics.
 (4)
The positive relevance logicR + does not have an F-RM semantics.
As above, one is capable of defining the ternary relation R using (df F ) and the forcing relation ⊩ using ≤. This means that for L L s, F-RM semantics can be considered in the context of algebraic semantics and vice versa.

4. Advantages and Limitations of ARM Semantics

4.1. Advantages and Limitations: General

Here we consider the advantages and limitations of U-RM and F-RM semantics as ARM semantics in general. The most important advantage of these semantics is that the clauses (∧), (∨), and either ( R U ) or ( R F ) can be used together. Please note that these clauses are not working together on distributive substructural logic systems in general, whereas they are still working on linearly ordered related substructural systems (see Examples 3 and 4). This means that these semantics use the standard clauses (∧), (∨), and so are more powerful than such semantics introduced in [1] in a pragmatic sense. Because most people working for semantics of a formal system would be familiar with these standard clauses and thus U-RM and F-RM semantics would be easier to understand to them. (Please note that in fuzzy logic prime theories are interchangeable with linear theories (see, e.g., [29]) and so the clause (∨) can be used in ARM semantics. Note also that the ARM semantics in [1] uses closed theories in place of linear theories.)
ARM semantics is also very powerful in a philosophical sense that one may understand concretely the connections between nodes to force a formula. For instance, the inequation ( e A ) shows that any pair of nodes a , b must be exchangeable in order to force the formula ( A & B ) ( B & A ) in the logic MIAL e (= MICAL). Hence, one can say that the basic feature of the postulate p e is the commutativity property. Please note that it is not easy for us to understand that the postulate p e has the commutativity feature if we do not interpret it using the definition (df U ) (or (df F )). The definition (df U ) says that the ternary relation R for accessibility is replaced by the operator ∘ and equality = and similarly for the definition (df F ). Using these definitions, one can achieve an intuitive understanding of the meaning of p e .
As is well known, Routley–Meyer semantics for relevance logics need not require structures equivalent to algebraic semantics for those logics. For example, the Routley–Meyer semantics for R introduced by Dunn [8] has the ternary relation R indefinable by (df U ) and (df F ) and the postulates for this semantics cannot be interpreted by those definitions (see [1,8]). Thus, related to accessibility, we may introduce two different approaches to Routley–Meyer-style semantics: One is Routley–Meyer-style semantics based on accessibility relations themselves and the other is that instead based on accessibility operations. The Routley–Meyer semantics for R above is a representative example of the former sort and the ARM semantics for the substructural fuzzy logics here is a representative example of the latter sort. Therefore, ARM semantics as a representative of the latter sort is very useful to deal with substructural fuzzy logics.
However, on the other side of the same coin, ARM semantics has clear limitations. First, it does not have its own semantics distinguished from algebraic semantics in that frames for the ARM semantics have the same structures as algebraic semantics. In this sense, ARM semantics is not very interesting in terms of the novelty of semantics. Second, it is not applicable to Routley–Meyer frames not having such algebraic structures. Thirdly, it is not applicable to non-fuzzy substructural logics in general. These three are the limitations of U-RM and F-RM semantics as ARM semantics in general.

4.2. Advantages and Limitations: Specific

Here we deal with comparative advantages and limitations between U-RM and F-RM semantics. We first introduce advantages of each semantics. First, consider U-RM semantics. As mentioned in Section 3.1, Position 3 implies that this semantics can be regarded as ARM semantics reducible to AK semantics. This shows that U-RM semantics is related to both Kripke-style semantics and algebraic semantics. More precisely, U-RM semantics belongs to a common area of algebraic, Kripke-style, and Routley–Meyer-style semantics. This is the most important logical advantage of U-RM semantics in that it provides a chance to investigate similarities and differences between the three sorts of semantics. U-RM frames have the postulates p 1 , p 2 , whereas F-RM frames do not. This means that U-RM frames have relational conditions for a unit element but F-RM frames do not. This is another advantage of U-RM semantics in a technical point of view for relational semantics when it is compared to F-RM semantics.
Next, consider F-RM semantics. Proposition 6 assures that if one accepts (df F ), one is capable of providing ARM semantics being equivalent to algebraic semantics for L s. This implies that F-RM semantics can cover all the systems introduced in Definition 2. This is the most important logical advantage of F-RM semantics in that this semantics as one sort of ARM semantics is as powerful as algebraic semantics. Please note that, as is shown in Section 3.2, substructural (core) fuzzy logics being algebraically complete are also complete regarding this sort of semantics and vice versa. F-RM frames have the postulates p s , p t , p , p 0 , whereas U-RM frames do not. This means that F-RM frames have relational conditions for the linear ordering of ≤ but U-RM frames do not. Moreover, it has the relational clause ( & R ) defined using the ternary relation R for a valuation of the intensional conjunction &. These provide a technical advantage of F-RM semantics for relational semantics when it is compared to U-RM semantics.
We next introduce limitations of each semantics. Like the face and back of a coin, the advantages of U-RM provide limits of F-RM semantics, and the advantages of F-RM give limitations of U-RM semantics. We state this. For the limitations of U-RM semantics, first consider the following example.
Example 5.
As in [1], (df U ) does not work for the postulates p p , p c , and p i introduced in Section 3.2. To verify this, apply (df U ) to p c , p p , and p i . Then, we obtain the following:
 p′c.
a a = a .
 p′p.
b = a a implies b = 1 a .
 p′i.
c = a b implies c = 1 b .
Since p c implies p p and vice versa, the postulates p c and p p are the same; therefore, the MIAL c -RM (MIAL p -RM resp) frame validates the axiom p (c resp), which is not provable in MIAL c (MIAL p resp). Similarly, the postulate p i implies that b = a b and thus the MIAL i -RM frame validates formulas such as φ ( ψ & φ ) , which is not provable inMIAL i .
This example shows that as semantics for basic (core) fuzzy logics U-RM semantics is less powerful than F-RM semantics in a logical point of view. Moreover, using the ternary relation R, one cannot provide the postulates for the above linear ordering and the clause ( & R ). These two are the limitations of U-RM semantics compared to F-RM semantics.
For the limitations of F-RM semantics, first consider the following example, which can be easily verified.
Example 6.
Using the definition (df F ) and the valuation conditions (→) and (⇝), one can prove the following.
 (i)
For any b F , b A implies b a B only if for any b , c F , R b a c and b A imply c B .
 (ii)
For any b F , b A implies a b B only if for any b , c F , R a b c and b A imply c B .
However, one cannot prove the reverse direction of each ( i ) and ( i i ) and so cannot do Proposition 3.
This example shows that F-RM semantics is not reducible to AK semantics. Therefore, such semantics can be called ARM semantics irreducible to AK semantics for L s. It implies that F-RM semantics is not helpful to study a common area between Kripke-style semantics and Routley–Meyer-style semantics. Hence, F-RM semantics is less powerful than U-RM semantics in a logical research of common areas between different sorts of semantics. Moreover, using the ternary relation R, one cannot provide the postulates for the unit element. These two are the limitations of F-RM semantics compared to U-RM semantics.
As a summary we note the following facts. First, U-RM semantics covers all the (core) fuzzy systems with equationally definable substructural axioms, whereas F-RM semantics those systems with inequationally definable substructural axioms. Second, in these two sorts of ARM semantics, (df U ) and (df F ) provide ways to interpret the ternary relation R using binary operation ∘ and (in)equation. Third, these two semantics are not applicable to Routley–Meyer-style semantics irreducible to algebraic one. For instance, while the RM semantics for R introduced in [8] requires the postulate R a a a for the rule ( m p ) , U-RM and F-RM semantics cannot have a = a a (by (df U )) and a a a (by (df F )), respectively, as semantic postulates for MIAL.

5. Discussion and Conclusions

We investigated ARM semantics for substructural (core) fuzzy logics based on mianorms. More precisely, we provided U-RM and F-RM semantics as two sorts of ARM semantics for them. We in particular deal with advantages and limitations of these semantics.
We note that U-RM and F-RM semantics provide frames as some reducts of their corresponding algebras and so are ARM semantics for fuzzy extensions of substructural logics. Especially, those semantics define ternary relations using binary operations and (in)equations like the semantics for substructural logics in [1]. However, unlike these semantics, they are provided based on linear theories and conditions for linear ordering, and so work for linearly ordered models. As mentioned in Section 1, ARM semantics as a relational semantics for substructural fuzzy logics in general is a novel one to connect n-nary operations and n+1-nary relations.
The author [47] introduced implicational tonoid fuzzy logics as fuzzy extensions of implicational tonoid logics, the class of logics satisfying transitivity, reflexivity, tonicity, and modus ponens introduced by the author and Dunn [48]. Please note that all the logic systems introduced in Definition 2 can be regarded as such fuzzy logics because they also satisfy the conditions for an implicational tonoid logic and are complete over linearly ordered models. Hence, this investigation can be thought of as an introduction of ARM semantics for concrete implicational tonoid fuzzy logics.
However, any more exact connection between semantics for implicational tonoid fuzzy logics and those for substructural (core) fuzzy logics is not studied here. For instance, while the former logics do not introduce any concrete connectives, the substructural (core) fuzzy logics do. For these logics, the connectives ∨ and ∧ need to be interpreted by j o i n and m e e t as lattice operators and need their corresponding relational consideration. Thus, in the context of implicational tonoid fuzzy logics, these things have to be dealt with. Furthermore, while non-operational RM semantics can be established for substructural logics, e.g., the system R (see [8]), such semantics for the fuzzy logics is not considered either. The author has a plan to study these two in the future, i.e., leave these for another day. By these two works, we can fill gaps between abstract logic (implicational tonoid fuzzy logics) and concrete logic (substructural (core) fuzzy logics) and between algebraic and non-algebraic Routley–Meyer-style semantics.
It is well known that lattices can be defined as ordered sets and as algebraic structures. To show the equivalence between the first relational definition of a lattice and its second algebraic definition, one has to have some definitions such as ( b ) x y iff j o i n ( x , y ) = y iff m e e t ( x , y ) = x . Similarly, we can consider the algebraic and ARM semantics and the definitions (df U ) and (df F ) regarding substructural (core) fuzzy logics. Associated with this, the author [49] studied basic logico-algebraic properties of micanorms characterizing the logic MICAL such as (left-)continuity, residuated implications, conjunctive and disjunctive micanorms, idempotent, nilpotent, and divisor micanorms, and so on. This implies that such theoretic applications of micanorms can be considered in the context of U-RM and F-RM frames. Namely, one can treat such properties as applications of U-RM and F-RM frames. More exact treatment of such applications is an another problem to solve in the future.

Funding

This work was supported by the Ministry of Education of the Republic of Korea and the National Research Foundation of Korea (NRF-2019S1A5A2A01034874).

Data Availability Statement

The author does not have any data supporting.

Conflicts of Interest

The author declares no conflict of interest.

References

  1. Yang, E. Algebraic relational semantics for basic substructural logics. Log. Anal. 2020, 252, 415–441. [Google Scholar]
  2. Kripke, S. Semantic analysis of modal logic I: Normal modal propositional calculi. Z. Math. Logik Grund. Math. 1963, 9, 67–96. [Google Scholar] [CrossRef]
  3. Kripke, S. Semantic analysis of intuitionistic logic I. In Formal Systems and Recursive Functions; Crossley, J., Dummett, M., Eds.; North-Holland Publ. Co.: Amsterdam, The Nederland, 1965; pp. 92–129. [Google Scholar]
  4. Kripke, S. Semantic analysis of modal logic II. In The Theory of Models; Addison., J., Henkin, L., Tarski, A., Eds.; North-Holland Publ. Co.: Amsterdam, The Nederland, 1965; pp. 206–220. [Google Scholar]
  5. Urquhart, A. The completeness of weak implication. Theoria 1972, 37, 274–282. [Google Scholar] [CrossRef]
  6. Urquhart, A. A general theory of implication. J. Symb. Log. 1972, 37, 443. [Google Scholar]
  7. Urquhart, A. Semantics for relevant logics. J. Symb. Log. 1972, 37, 159–169. [Google Scholar] [CrossRef]
  8. Dunn, J.M. Relevance logic and entailment. In Handbook of Philosophical Logic; Gabbay, D., Guenthner, F., Eds.; Reidel Publ. Co.: Dordrecht, The Nederland, 1986; Volume III, pp. 117–224. [Google Scholar]
  9. Routley, R.; Meyer, R.K. The semantics of entailment (II). J. Phil. Log. 1972, 1, 53–73. [Google Scholar] [CrossRef]
  10. Routley, R.; Meyer, R.K. The semantics of entailment (III). J. Phil. Log. 1972, 1, 192–208. [Google Scholar] [CrossRef]
  11. Routley, R.; Meyer, R.K. The semantics of entailment (I). In Truth, Syntax, and Modality; Lebranc, H., Ed.; North-Holland: Amsterdam, The Nederland, 1973; pp. 199–243. [Google Scholar]
  12. Restall, G. An Introduction to Substructural Logics; Routledge: London, UK, 2000. [Google Scholar]
  13. Fine, K. Models for entailment. J. Phil. Log. 1974, 3, 347–372. [Google Scholar] [CrossRef]
  14. Došen, K. Sequent systems and groupoid models I. Stud. Log. 1988, 47, 353–385. [Google Scholar]
  15. Došen, K. Sequent systems and groupoid models II. Stud. Log. 1989, 48, 41–65. [Google Scholar]
  16. Ono, H. Completions of algebras and completeness of modal and substructural logics. In Advances in Modal Logic; Balbiani, P., Ed.; College Publications: London, UK, 2003; Volume 4, pp. 335–353. [Google Scholar]
  17. Montagna, F.; Ono, H. Kripke Semantics, undecidability and standard completeness for Esteva and Godo’s Logic MTL∀. Stud. Log. 2002, 71, 227–245. [Google Scholar] [CrossRef]
  18. Montagna, F.; Sacchetti, L. Kripke-style semantics for many-valued logics. Math. Log. Quart. 2003, 49, 629–641. [Google Scholar] [CrossRef]
  19. Yang, E. Kripke-style semantics for UL. Korean J. Log. 2012, 15, 1–15. [Google Scholar]
  20. Yang, E. Algebraic Kripke-style semantics for substructural fuzzy logics. Korean J. Log. 2016, 19, 295–322. [Google Scholar]
  21. Ono, H.; Komori, Y. Logics without the contraction rule. J. Symb. Log. 1985, 50, 169–201. [Google Scholar] [CrossRef]
  22. Ishihara, H. A canonical construction for substructural logics. J. UCS. 2000, 6, 155–168. [Google Scholar]
  23. Kamide, N. Kripke Semantics for modal substructural logics. J. Logic Lang. Inform. 2002, 11, 453–470. [Google Scholar] [CrossRef]
  24. Dunn, J.M. Logics as Tools, or Humans as Rational Tool Making Animals. Jeonbuk National University: Jeonju, Korea, 2018. [Google Scholar]
  25. Dunn, J.M. Ternary relational semantics and beyond: Programs as data and programs as instructions. Log. Stud. 2001, 7, 1–20. [Google Scholar]
  26. Dunn, J.M. The relevance of relevance to relevance logic. In ICLA 2015: Logic and Its Applications; Banerjee., M., Krishna, S.N., Eds.; Springer: Berlin, Germany, 2015; pp. 11–29. [Google Scholar]
  27. Bimbó, K.; Dunn, J.M. The emergence of set-theoretic semantics for relevance logics around 1970. J. Appl. Log. 2017, 4, 557–589. [Google Scholar]
  28. Bĕhounek, L.; Cintula, P. Fuzzy logics as the logics of chains. Fuzzy Sets Syst. 2006, 157, 604–610. [Google Scholar]
  29. Cintula, P. Weakly Implicative (Fuzzy) Logics I: Basic properties. Arch. Math. Log. 2006, 45, 673–704. [Google Scholar] [CrossRef]
  30. Diaconescu, D. Kripke-style semantics for non-commutative monoidal t-norm logic. J. Mult.-Valued Log. Soft Comput. 2010, 16, 247–263. [Google Scholar]
  31. Diaconescu, D.; Georgescu, G. On the forcing semantics for monoidal t-norm-based logic. J. UCS 2007, 13, 1550–1572. [Google Scholar]
  32. Yang, E. Algebraic Kripke-style semantics for an extension of HpsUL, CnHpsUL*. Korean J. Log. 2016, 19, 107–126. [Google Scholar]
  33. Yang, E. Algebraic Routley–Meyer-style semantics for the fuzzy logic MTL. Korean J. Log. 2018, 21, 353–371. [Google Scholar]
  34. Yang, E. Algebraic Routley–Meyer-style semantics for the involutive monoidal t-norm logic IMTL. Korean J. Log. 2020, 23, 177–195. [Google Scholar]
  35. Allwein, G.; Dunn, J.M. Kripke models for linear logics. J. Symb. Log. 1993, 58, 514–545. [Google Scholar] [CrossRef]
  36. Bimbó, K.; Dunn, J.M. Generalized Galois Logics; CSLI: Stanford, CA, USA, 2008. [Google Scholar]
  37. Chernilovskaya, A.; Gehrke, M.; van Rooijen, L. Generalized Kripke Semantics for Lambek-Grishin calculus. Log. J. IGPL 2012, 20, 1110–1132. [Google Scholar] [CrossRef]
  38. Dunn, J.M. Partial gaggles applied to logics with restricted structural rules. In Substructural Logics; Schroeder-Heister, P., Dosšen, K., Eds.; Clarendon: Oxford, UK, 1993; pp. 63–108. [Google Scholar]
  39. Dunn, J.M.; Gehrke, M.; Palmigiano, A. Canonical extensions and relational completeness of some structural logics. J. Symb. Log. 2005, 70, 713–740. [Google Scholar] [CrossRef]
  40. Gehrke, M. Generalized Kripke Semantics. Stud. Log. 2006, 84, 241–275. [Google Scholar] [CrossRef]
  41. Hartonas, C.; Dunn, J.M. Stone Duality for Lattices. Alg. Univ. 1997, 37, 391–401. [Google Scholar] [CrossRef]
  42. Yang, E. Basic substructural core fuzzy logics and their extensions: Mianorm-based logics. Fuzzy Sets Syst. 2016, 301, 1–18. [Google Scholar] [CrossRef]
  43. Cintula, P.; Horčík, R.; Noguera, C. Non-associative substructural logics and their semilinear extensions: Axiomatization and completeness properties. Rev. Symb. Log. 2013, 6, 394–423. [Google Scholar] [CrossRef] [Green Version]
  44. Cintula, P.; Horčík, R.; Noguera, C. The quest for the basic fuzzy logic. In Petr Hájek on Mathematical Fuzzy Logic; Montagna, F., Ed.; Springer: Dordrecht, The Nederland, 2015; pp. 245–290. [Google Scholar]
  45. Cintula, P.; Noguera, C. A general framework for mathematical fuzzy logic. In Handbook of Mathematical Fuzzy Logic; Cintula, P., Hájek, P., Noguera, C., Eds.; College Publications: London, UK, 2011; Volume 1, pp. 103–207. [Google Scholar]
  46. Horčík, R. Algebraic semantics: Semilinear FL-algebras. In Handbook of Mathematical Fuzzy Logic; Cintula, P., Hájek, P., Noguera, C., Eds.; College Publications: London, UK, 2011; Volume 1, pp. 283–353. [Google Scholar]
  47. Yang, E. Implicational Tonoid Fuzzy Logics. In Frontiers in Artificial Intelligence and Applications: Fuzzy Systems and Data Mining IV; Tallo´n-Ballesteros, A.J., Li, K., Eds.; IOS Press: Amsterdam, The Nederland, 2018; Volume 309, pp. 223–230. [Google Scholar]
  48. Yang, E.; Dunn, J.M. Implicational tonoid logics: Algebraic and relational semantics. Log. Universalis 2021. [Google Scholar] [CrossRef]
  49. Yang, E. Micanorm aggregation operators: Basic logico-algebraic properties. Soft Comput. 2021, 25, 13167–13180. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Yang, E. Basic Core Fuzzy Logics and Algebraic Routley–Meyer-Style Semantics. Axioms 2021, 10, 273. https://0-doi-org.brum.beds.ac.uk/10.3390/axioms10040273

AMA Style

Yang E. Basic Core Fuzzy Logics and Algebraic Routley–Meyer-Style Semantics. Axioms. 2021; 10(4):273. https://0-doi-org.brum.beds.ac.uk/10.3390/axioms10040273

Chicago/Turabian Style

Yang, Eunsuk. 2021. "Basic Core Fuzzy Logics and Algebraic Routley–Meyer-Style Semantics" Axioms 10, no. 4: 273. https://0-doi-org.brum.beds.ac.uk/10.3390/axioms10040273

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop