Next Article in Journal
The Effect of Flue Gas Recirculation on CO, PM and NOx Emissions in Pellet Stove Combustion
Next Article in Special Issue
Study on the Evolution Pattern of the Aromatics of Lignin during Hydrothermal Carbonization
Previous Article in Journal
Barriers to the Expansion of Sugarcane Bioelectricity in Brazilian Energy Transition
Previous Article in Special Issue
Thermal Energy and Exhaust Emissions of a Gasifier Stove Feeding Pine and Hemp Pellets
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Energies
Volume 16
Issue 2
10.3390/en16020949
energies-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Advancements in Giant Reed (Arundo donax L.) Biomass Pre-Treatments for Biogas Production: A Review

by
Ciro Vasmara
1,
Stefania Galletti
2,*,
Stefano Cianchetta
2 and
Enrico Ceotto
1
1
CREA—Council for Agricultural Research and Economics, Research Centre for Animal Production and Aquaculture, Via Beccastecca 345, 41018 S. Cesario sul Panaro, Italy
2
CREA—Council for Agricultural Research and Economics, Research Centre for Agriculture and Environment, Via di Corticella 133, 40128 Bologna, Italy
*
Author to whom correspondence should be addressed.
Energies 2023, 16(2), 949; https://0-doi-org.brum.beds.ac.uk/10.3390/en16020949
Submission received: 5 December 2022 / Revised: 29 December 2022 / Accepted: 10 January 2023 / Published: 14 January 2023
(This article belongs to the Special Issue Biomass Energy Fuels)
Browse Figures
Versions Notes

Abstract

:
Giant reed is a non-food, tall, rhizomatous, spontaneous perennial grass that is widely diffused in warm-temperate environments under different pedo-climatic conditions. In such environments, it is considered one of the most promising energy crops in terms of economic and environmental sustainability, as it can also be cultivated on marginal lands. Owing to its complex and recalcitrant structure due to the lignin content, the use of giant reed as a feedstock for biogas production is limited. Thus, pre-treatment is necessary to improve the methane yield. The objective of this review was to critically present the possible pre-treatment methods to allow the giant reed to be transformed in biogas. Among the studied pre-treatments (i.e., hydrothermal, chemical, and biological), alkaline pre-treatments demonstrated better effectiveness in improving the methane yield. A further opportunity is represented by hybrid pre-treatments (i.e., chemical and enzymatic) to make giant reed biomass suitable for bio-hydrogen production. So far, the studies have been carried out at a laboratory scale; a future challenge to research is to scale up the pre-treatment process to a pilot scale.

1. Introduction

Energy production from biomass can mitigate global warming and foster energy security by displacing the consumption of fossil fuels. Renewable energy carriers in the form of biogas (i.e., biomethane and bio-hydrogen) can be produced from locally available biomass, such as livestock effluents, food waste, dedicated energy crops, agriculture, and forest residues, using microbial processes, notably anaerobic digestion (AD), dark fermentation (DF), or photo-fermentation (PF).
Biogas can be used directly as a source of heat and electricity or upgraded to obtain higher-purity fuel-grade gas that is suitable for transportation or directly injected into the natural gas grid and used by various industries [1,2,3]. Compared with other renewable energy production systems, such as those based on solar and wind energy, biogas production has the advantage of being largely independent of daily or seasonal fluctuations of the sources; moreover, biomethane and bio-hydrogen can be stored using existing facilities [2,4,5,6]. Following biogas production, the residual digestate can be mechanically separated and used as a fertilizer or soil improver [7] if chemical and biological standards are fulfilled.
The utilization of lignocellulosic biomass, which is composed of cellulose, hemicellulose, and lignin, provides the opportunity to convert a substantial amount of renewable resources into fungible energy commodities, such as methane or hydrogen. In fact, if properly converted, the amount of lignocellulosic biomass produced annually theoretically exceeds the existing global energy requirement [8].
The biogas from lignocellulosic biomass is produced mostly from holocellulose, consisting of cellulose and hemicellulose, which are the most abundant biopolymers on Earth [9,10]. Among lignocellulosic species, giant reed (Arundo donax L.) increasingly attracted attention as an energy crop [11]. Giant reed is a non-food, tall, rhizomatous, spontaneous perennial grass [12] that is widely diffused in warm-temperate environments under different pedo-climatic conditions. In such environments, it is considered one of the most promising energy crops [13] in terms of economic and environmental sustainability, as it can also be cultivated on marginal lands (i.e., wetlands, riparian slopes, polluted areas) that are poorly or totally unsuited to annual row crops, avoiding competition with food production or land use change [14,15,16]. As a matter of fact, giant reed can thrive in many soils, ranging from loose sands and gravel soils to heavy clay, and tolerates both high salinity and extended periods of drought [12]. Moreover, it requires low agronomic input in terms of fertilizers, tillage, pesticides, and irrigation water [11]. In particular, it uses nitrogen very efficiently, which is seasonally translocated from the above to the below plant organs and vice versa. Furthermore, giant reed cultivation can provide different ecosystem services. In fact, it provides substantial soil carbon sequestration and can efficiently remove residual soil nitrate across the soil profile [17,18]. However, some authors highlighted that due to its invasiveness, giant reed introduction in fragile ecosystems should be avoided [19].
The biomass yield of multi-annual giant reed plantations can reach an average of 30.3 Mg ha−1 y−1 on a dry weight basis in the Mediterranean environment based on numerous reports [20,21,22,23]. However, the yield is strongly influenced by the climate, water, and nutrient availability, yielding an average of 18.05 Mg ha−1 y−1 in a less favorable continental climate (Hungary) without fertilization or irrigation [20] and reaching up to 64.3 Mg ha−1 y−1 when properly supplied with nutrients and under highly favorable conditions (northern Italy) [24]. The highest ever giant reed yield (i.e., 125 Mg DM ha−1) was achieved in Australia in subsurface flow, gravel-based constructed wetlands supplied by aquaculture wastewater [25]. Giant reed has high investment but low maintenance costs [26], with the price of propagules derived from the rhizomes being one of the most expensive direct costs besides the harvest and transportation [19]. However, stands can be easily established by shoot-cutting propagation when properly managed [14]. Micro-propagated plants also offer the potential for reducing the cost of crop establishment.
Despite the high biomass productivity of giant reed, its use as feedstock for biogas production is limited by its complex and recalcitrant structure, which is typical of lignocellulosic biomass [6]. This implies a low methane yield; therefore, pre-treatment is necessary to improve the conversion of such lignocellulosic biomass into biogas [3].
The main objective of this review was to critically discuss the possible pre-treatment methods to make the giant reed biomass prone to be transformed into biogas. First, the fiber composition of the giant reed biomass is reviewed; then, the anaerobic processes to produce methane (i.e., AD) or bio-hydrogen (i.e., DF and PF) are described. Then, the different pre-treatment methods proposed in the scientific literature to improve biogas production from giant reed are reviewed. Some of the most promising methods not yet tested on giant reed are reported as well.

2. Compositional Features of Giant Reed Biomass

According to studies conducted in Italy, the cellulose content of giant reed ranged between 32.1 and 46.5%; the hemicellulose content fluctuated between 20.5 and 29%; whereas the lignin content exhibited larger variability, varying between 9.6 and 25.9% (Table 1). Studies conducted in the USA reported cellulose content for giant reed ranged between 27.7 and 41.5% and the hemicellulose content varied between 13.9 and 20.5%, whereas the lignin variability fluctuated between 16 and 23.9%. The values of the compositional traits of giant reed reported for other countries (China, Portugal, and Thailand) fall within the ranges listed for the two aforementioned countries (Table 1).
Indeed, the discrepancies in the values are mostly attributable to the analytical method for the fiber fractions characterization (i.e., van Soest or NREL). In fact, when the total of the three individual components (i.e., cellulose, hemicellulose, and lignin) is considered, the differences are less pronounced and most of the values are within the range of 70.3–82.7%.
Cellulose is a polymer that is constituted by long chains of cellobiose (two glucose molecules; Figure 1 [45]) bonded by van der Waals and hydrogen bonds to form microfibrils [46]. Cellulose is commonly found in both crystalline and amorphous forms [47]. The higher the crystallinity, the tougher it is to break it down into cellobiose or glucose units. Thus, the biomass complexity is increased, making it more recalcitrant to biodegradation.
Hemicellulose is formed by various polymers of pentoses and hexoses with a predominance (up to 90%) of xylan-based compounds [48,49]. Both cellulose and hemicellulose (holocellulose) can be degraded during the AD process.
Lignin is an aromatic polymer formed by three phenylpropane-based units. Its molecular structure is inherently highly resistant to microbial attack and oxidative stress; its high hydrophobicity also lowers its biodegradability [48]. Lignin is typically bonded to cellulose, isolating the latter from microbial activity [50], resulting in a low biogas yield.
Aiming to increase the biogas yield, lignocellulosic biomass must be pre-treated to increase the holocellulose accessibility to the microbial attack. Pre-treatment is also mandatory to obtain a sugar-rich substrate suitable for DF [29]. Various pre-treatment strategies were proposed to modify the recalcitrant structure of lignocellulosic biomass and enhance its digestibility for bio-methanogenesis [6,51] or bio-hydrogenesis [52].

3. Anaerobic Digestion Process for Methane Production

The anaerobic digestion process converts organic matter into methane-rich biogas. Anaerobic digestion can be divided into four steps: hydrolysis, acidogenesis, acetogenesis, and methanogenesis [53] (Figure 2).
During the hydrolysis step, the macromolecules are broken down into smaller compounds characterized by higher solubility (i.e., amino acids, fatty acids, monosaccharides, etc.). These molecules are converted into volatile fatty acids (VFAs), alcohols, methylamines, H2, and CO2 in the acidogenic step. Subsequently, these compounds are converted into acetic acid, H2, and CO2 during the acetogenic step. The products of the former step are converted into CH4 and CO2 in the methanogenesis step. During both the acidogenic and acetogenic steps, H2 is produced as a by-product, whereas CH4 is produced only in the methanogenesis step (Figure 2). The large variety of by-products generated during the first three steps of AD is due to the activity of several bacterial groups belonging to the facultative or obligate anaerobes [54,55]. In contrast, methanogenesis is normally operated by only two groups of methanogens: acetoclastic and hydrogenotrophic [53]. However, it is known that Methanosarcina sp. is able to directly convert methanol into CH4 [56].

4. Fermentation Processes for Bio-Hydrogen Production

Photo-fermentation and dark fermentation processes convert organic matter into hydrogen-rich biogas. Bio-hydrogen can be produced from various organic substrates. Bio-hydrogen is a clean energy carrier that can be widely used in industrial processes and transportation, as well as converted into electricity through fuel cells [29,52,57]. Due to the complex structure of the lignocellulosic biomass, a pre-treatment of the feedstock is essential for efficient bio-hydrogen production [52]. Simple sugars generated from the disruption of the biomass are the ideal substrate for H2-producing bacteria [52]. Biological hydrolysis using cellulase, α-amylase, β-glucosidase, and endo-xylanase is a prerequisite for H2 fermentation [29,52,58].
The major processes studied for bio-hydrogen production are PF and DF (Figure 3).

4.1. Photo-Fermentation

Photo-fermentation is a light-dependent anoxic process where photosynthetic bacteria convert the organic matter into H2 and CO2 [57,59,60]. Purple nonsulfur bacteria (Chlorobium, Chromatium, Halobacterium, Rhodobacter, Rhodopseudomonas, and Rhodospirillum) are the most studied due to the higher H2 rate production in comparison with green and purple sulfur bacteria [59,61,62].
These bacteria can degrade fructose and glucose into organic acids (namely, acetic acid) that are used as electron donors to produce H2 and CO2 via the metabolic pathway (1) [59,60]:
CH3COOH + 2H2O = 4H2 + 2CO2
This is a non-spontaneous reaction that requires an external energy source consisting of light. Photo-fermentation is catalyzed by the nitrogenase enzyme, which, in conditions of nitrogen deficiency, allows for the formation of H2 from protons by consuming Adenosine triphosphate (ATP) instead of forming NH3 [57,62,63,64]. Indeed, this kind of PF is energetically costly from a metabolic standpoint since the electrons donated by the acetic acid are transported by the ferredoxin to nitrogenase using ATP, which is added to the ATP consumed for the H2 production, as previously described [59,62,63,64].
This results in a slow bacterial growth rate, which, in turn, causes a low volumetric H2 production [60,65]. Moreover, the light conversion efficiency is low, and the light intensity affects H2 production [60,62,63]. The highest efficiency conversion (up to 10%) was obtained with low light intensity and low H2 production rates [60]. In addition, large areas and water (or very diluted substrates) are required for such a bio-hydrogen-producing process [57,66].

4.2. Dark Fermentation

Dark fermentation is a light-independent bio-hydrogen production process. Carbohydrates (namely, simple sugars) are the most important substrate for DF [58,62,63,67,68]. This process is performed by Enterobacter and Clostridium genera, which convert the organic matter into H2, CO2, organic acids, and alcohols, with pyruvate as the key intermediate by-product (Figure 3) [57,63,67,69]. These genera have two diverse hydrogenases (i.e., [NiFe] hyd3 and [FeFe]; Figure 4). [FeFe] hydrogenase, which is typical of Clostridia, is the most H2-productive (Figure 4b) [62,70].
Dark fermentation can be carried out in both thermophilic and mesophilic conditions. Although the H2 yield is higher in thermophilic conditions than in mesophilic conditions, the volumetric productivity is reversed [71].
Typically, DF performed using Clostridia follows two main metabolic pathways (2) and (3), described below, which can occur simultaneously [29,67,72]:
C6H12O6 + 2H2O = 2CH3COOH + 2CO2 + 4H2
C6H12O6 = CH3CH2CH2COOH + 2CO2 + 2H2
The by-products of DF are acetic and butyric acid. Indeed, DF is a part of the AD process (Figure 5), and it can be separated from the methanogenesis step in a two-stage system that increases the energetic output since the by-products of DF can be used to feed the methanogenesis reactor (Figure 5) [29,52].
In DF, the H2 rate and volumetric production are higher than in PF [59,62,67]. Yet, smaller reactors are required in DF in comparison with PF [73].

5. Pre-Treatments

The pre-treatments have the specific purpose to divide the holocellulose (in particular, cellulose) from the lignin [74]. This is convenient because lignin, due to its chemical properties, protects the cellulose from microbial degradation (Figure 6).
The types of pre-treatments reported in the literature for giant reed biomass are mechanical, hydrothermal, chemical, and biological; in some cases, they are combined. Table 2 shows the effects of the different pre-treatments on methane production in AD.

5.1. Mechanical Pre-Treatments

Mechanical pre-treatments reduce the particle size and therefore increase the surface area of the biomass exposed to microbial attack. Moreover, the overall porosity of the substrate is increased while the crystallinity is reduced [75,76,77]. The size reduction causes a decrease in the viscosity of the substrate, resulting in a reduction in floating layers, which can cause operational problems [75]. Mechanical pre-treatments are chopping, grinding, hammer-milling, knife-milling, and roll-milling [77,78]. Grinding and milling are the most studied [6]. The major advantage of mechanical pre-treatments is that they do not cause the release of inhibitory compounds [76]. Nevertheless, they do not remove and detach the lignin from the cellulose [78] because their effect is merely a reduction in particle size. Although mechanical pre-treatments are well known to improve biogas yield, they have the disadvantage of being energy-intensive [3,6,75,76,78].
The literature on giant reed mechanical treatments is still limited (Table 2). Dell’Omo et al. [33] applied a two-stage milling system to giant reed biomass. Working in mesophilic batch test these authors reported a +137% methane yield compared with untreated biomass. Nevertheless, it must be considered that the baseline value of untreated giant reed (i.e., 90 mL CH4 g−1 VS from a 20 mm size) is quite low compared with the range of values reported by other authors (i.e., 165–217 mL CH4 g−1 VS from a 12–13 mm size) from untreated giant reed in mesophilic batch conditions [38,39,41]. Hence, the reported yield gain might be overestimated. Yet, according to Dell’Omo et al. [33], mechanical pretreatment can be regarded as energy-demanding because it consumed 19% of the energy that was subsequently produced.

5.2. Hydrothermal Pre-Treatments

Hydrothermal pre-treatments can be performed at different combinations of temperature, pressure, humidity, and time. These processes not only use water to primarily solubilize hemicellulose and disrupt the lignin-carbohydrate matrix but can also avoid or cut the use of external mineral acid catalysts; therefore, they do not require particular corrosion-resistant equipment and there is a reduction in hazardous pollutants. The most studied pre-treatments on giant reed are liquid hot water and steam explosion.

5.2.1. Liquid Hot Water Pre-Treatment

Liquid hot water (LHW) pre-treatment is based on variations in temperature, pressure, and time [75]. The temperature adopted is between 50–260 °C [75,76], combined with pressure up to 9 bar for 15–120 min [75]. The aim of LHW pre-treatment is to modify the biomass structure, increasing the solubility in water [76]. In fact, water and heat break down the bonds between crystalline cellulose and the other fiber fractions [75,77], while hemicellulose is depolymerized and degraded into volatile fatty acids (VFAs) and monosaccharides [77]. Thus, the microbial conversion of biomass into biogas is enhanced.
Indeed, the imposed conditions of high temperature and pressure determine the auto-ionization of water that generates hydronium ions, which, in turn, deconstruct the lignocellulosic biomass [78]. The major advantage of LHW pre-treatment is that no use of chemical compounds or particular corrosion-resistant equipment is required [76]. On the other hand, the high temperature generates furans derived from hemicellulose decomposition, which can inhibit anaerobic microbial activities [3,6,79]. The longer the pre-treatment time, the higher the concentration of inhibitory compounds. [80]. Moreover, for these pre-treatments, water and energy requirements are still high [3].
Some authors reported methane yield increases of 23% [34] and 31% [42] in both thermophilic and mesophilic conditions. Owing to the high temperature used (i.e., 180–190 °C for 10 min), such pre-treatments substantially increased the methane yield. Nevertheless, the pre-treatment consumed more energy than the one produced [42].
However, with hot water at a lower temperature (121 °C for 20 min), a negligible increase in methane yield (+3%) was reported [28]. Thus, LHW pre-treatment for giant reed biomass is only effective at about 180 °C.

5.2.2. Steam Explosion Pre-Treatments

Steam explosion is a particular hydrothermal pre-treatment. During the process, biomass is exposed to hot steam for a few minutes, followed by a rapid decompression, which results in an explosion of the biomass with the breakage of the structure of the fiber [3,6,76,78,80] due to the auto-hydrolysis of the acetyl group of hemicellulose [78]. The pre-treatment is carried out at 160–270 °C for 5–15 min at up to 50 bar [3,6,76,77,78]. Therefore, the steam explosion is considered energy-intensive [81,82]. Unfortunately, due to high temperature and pressure conditions, microbial inhibitory compounds (i.e., phenols and furfurals) are generated during biomass degradation [77]. Steam explosion pre-treatment was used on giant reed for bio-hydrogen production [83,84,85]. However, this pre-treatment has not yet been tested on giant reed biomass for biomethane production.

5.3. Chemical Pre-Treatments

Chemical pre-treatments are a family of diverse pre-treating agents. The most studied chemical agents to pre-treat lignocellulosic biomass are acids, alkali, ozone, hydrogen peroxide, organic solvents (organosolv), hydrotropes, ionic liquids, and deep eutectic solvents; many of these agents are yet to be tested on giant reed for biogas production.

5.3.1. Acid Pre-Treatment

Acid pre-treatment preferentially solubilizes the hemicellulose by breaking down the van der Waals, hydrogen, and covalent bonds [6,77]. At a higher integration scale, the hemicellulose solubilization generates pores facilitating the bacterial attack on biomass [77,78]. In addition, a small fraction of lignin is removed [3]. However, it was hypothesized that lignin could precipitate on the cellulose surface, resulting in a block of the biodegradation process of the substrate [86].
Acid pre-treatment can be performed using various inorganic (i.e., H2SO4, H3PO4, HCl, HNO3) or organic (acetic, formic, oxalic, succinic) acids [3,77,78]. At relatively low temperatures (<100 °C), a high acid concentration is required (30–70% v/v), whereas, at higher temperatures (120–210 °C), diluted acids (0.2–2.5% v/v) can be used [3,76,78]. Diluted acids are more monetarily convenient. Nevertheless, in both cases, there are risks of equipment corrosion and hazards for the people involved due to the utilization of more or less concentrated acid and high temperature [6,48,76]. During the acid pre-treatment, pentoses derived from the hemicellulose decomposition are degraded to inhibitor compounds, such as furfural and hydroxymethyl furfurals (HMFs) [77,78,80].
Acid pre-treatment was tested on giant reed, where 2% w/w H2SO4 was used at 150–180 °C; no methane yield increase was obtained [34]. Indeed, 49–100% inhibition was observed in thermophilic conditions (Table 2).

5.3.2. Alkali Pre-Treatment

Alkali pre-treatment is highly effective in de-lignifying biomass [6,59,61]. During the alkali pre-treatment process, the biomass is decomposed and solubilized by the OH− ions. Proteins lose their original three-dimensional shape and the lipids are saponified such that the cellular polymeric structure is destroyed and the intracellular material is released, improving the degradability of the biomass [75].
The solvation separates the hemicellulose from the lignin by removing various uronic acids and acetate structures (acetyl group) [77]. Lignin is solubilized via saponification and disruption of the hydrogen, ester, aryl-ether, and C-C bonds, resulting in the modifications of the lignin side chains and deviations in the aromatic rings [3,75,76,77,78,86,87]. Cellulose is only marginally affected by the alkali pre-treatment [28]. From the lignin depolymerization, several compounds are generated: phenols, syringaldehyde, and vanillin, which were reported to inhibit or block the AD process [77,79]. The most common alkali used are CaO, Ca(OH)2, KOH, NaOH, Na2CO3, and urea [3,75,77,80], typically at room temperature and pressure for at least 24 h, even if higher temperatures can be adopted to reduce the pre-treatment duration.
The major disadvantages of the alkali pre-treatment are the relatively long pre-treatment time, which requires a reactor of adequate size [77]. Moreover, during this kind of pre-treatment, alkali is converted into salts, which are embedded into biomass, and therefore, they cannot be recovered [88]. Thus, the choice of the base used for pre-treatment is crucial because Na+ presence in the biomass can hamper microbial activity during the AD process; methanogens, in particular, are highly sensitive to Na+ [3,6,77]. Moreover, Na is environmentally harmful because its disposal causes soil degradation [76,77]. Although KOH is about threefold more monetarily expensive compared with NaOH, it is less toxic for microbial activity [3,88]. In addition, KOH can improve the CH4 yield similarly to NaOH at a fourfold lower concentration [89].
Nevertheless, NaOH treatment is the most studied pre-treatment for giant reed biomass (Table 2). In mesophilic batch conditions, a methane yield increase of 21% was reported using 0.15 N NaOH for 24 h at 25 °C [35], whereas increases of 61 and 63% were reported using 20 g L−1 NaOH for 24 h at 24–25 °C in mesophilic batch conditions [38,42]. In contrast, a methane yield increase of 34% was obtained by pre-treating giant reed biomass with 20 g L−1 Ca(OH)2 for 24 h at 25 °C [38]. Recently, KOH was used at 121 °C for 20 min, obtaining a 21% methane yield increase in mesophilic batch conditions [28].
Typically, chemical pre-treatments cause partial biomass solubilization. The compounds generated during these pre-treatments are concentrated in the liquid phase and they could inhibit the subsequent biotechnological processes (i.e., enzymatic hydrolysis, bio-methanogenesis, and bio-hydrogenesis).
Therefore, it is common practice to apply a detoxifying washing step to the pre-treated biomass [28,29]. Unfortunately, this practice generates a waste stream (liquid fraction) that is potentially harmful to the environment. The recovery of the compounds from such a liquid fraction would be useful from both environmental and economic standpoints [3,41,78,90]. For giant reed, the recycling of the black liquor generated during the alkali pre-treatment was proposed. Jiang et al. [38] recycled the NaOH used in five successive pre-treatment batches. However, the first batch (without recycling) reached the highest CH4 yield, while the subsequent batches progressively decreased. More recently, the black liquor derived from NaOH pre-treatment was recycled in DF without particular inhibitory phenomena [29]. Antifungal properties of the liquid fraction derived from KOH pre-treatment can be exploited in horticulture [91]. As an alternative to recycling, the washing step can be avoided, contributing to the organic load of the AD reactor. In fact, no differences were detected in CH4 yield between washed and unwashed biomass after KOH pre-treatment [28]. These authors reported that due to the biomass loss after the washing step, the actual CH4 production per unit of initial biomass did not differ from that of untreated giant reed. Thus, the presence of black liquor in the reactor contributed to the overall CH4 production. In this case, the digestate can be used since K is a macro-nutrient for crop nutrition.

5.3.3. Ozonolysis

Ozone (O3) is highly reactive with compounds containing conjugated double bonds, such as lignin [76]. The ozonolysis mechanism is twofold: the direct oxidization by O3 and the indirect reaction of the hydroxyl radicals [75]. In particular, the aromatic structural units of lignin are oxidized, generating keto-acids and aldehydes [77]. Thus, such pre-treatment is highly selective for lignin. In fact, ozonolysis partially affects hemicellulose, whereas cellulose remains intact [78]. Ozonolysis is considered an eco-friendly technology since no chemicals are required [75,77]. Currently, ozonolysis pre-treatment has not yet been tested on giant reed biomass for biogas production.

5.3.4. Hydrogen Peroxide (H2O2) Pre-Treatment

Hydrogen peroxide detaches the lignin reacting with soluble fragments [78]: the lignin is oxidized, breaking down the aromatic nuclei, resulting in electrophilic substitutions, dislocation of side chains, and cleavage of alkyl aryl ether bonds [3,88]. The oxidization of lignin into aromatic compounds could inhibit AD [78]. Moreover, an excess of H2O2 concentration could lead to an abundant generation of hydroxyl ions (OH−) [6], which may inhibit the AD process following the pre-treatment [46]. This pre-treatment is poorly selective and part of the hemicellulose and cellulose are also lost [6]. Hydrogen peroxide pre-treatment is carried out at a temperature of 100–300 °C [6,76]; hence, it should be considered an energy-consuming process. Hydrogen peroxide can be combined with ferrous iron, giving rise to the Fenton process. Ferrous iron reacts with H2O2 at pH 2–3, generating HO∙ radicals that attack the organic matter [75]. No references are available in the literature for hydrogen peroxide pre-treatment on giant reed biomass for biogas production.

5.3.5. Organosolv Pre-Treatment

Organosolv pre-treatment is carried out using some organic solvents (glycerol, ethylene, ethyl glycol, methanol, ethanol, acetone, acetic acid, and peracetic acid), at temperatures of 150–195 °C for 30–90 min [3,6,76,77,78]. Organosolv is effective at lignin and hemicellulose removing via cleavage of α-O-aryl, β-O-aryl bonds, and 4-O-methylglucuronic acid ester bonds [78]. Organic solvents can be combined with acid as a catalyst. However, the acid addition can lead to the generation of furfurals [76,77], which can inhibit the AD process. Until now, organosolv pre-treatment has not yet been tested on giant reed biomass for biogas production.

5.3.6. Hydrotropic Pre-Treatment

Hydrotropes are amphiphilic salts characterized by the presence of both hydrophilic and hydrophobic functional groups [78,92,93]. Thanks to their molecular structure, the presence of aromatic anions, and the nature of the functional groups, they mediate the solubilization of hydrophobic compounds [78], notably lignin. The more utilized pre-treating agents are sodium benzoate, sodium cymene sulphonate, sodium naphthalenesulfonate, sodium phenolsulfonate, sodium salicylate, sodium toluenesulfonate, and sodium xylenesulfonate [78]. These compounds are non-toxic and potentially recyclable; thus, their use is considered environmentally friendly [78]. Currently, no studies have been reported on hydrotropic pre-treatment of giant reed biomass for biogas production.

5.3.7. Ionic Liquid Pre-Treatment

Ionic liquids (ILs) are used in emerging pre-treatment processes [75,77]. Ionic liquids are a combination of large organic cations and small organic anions; thus, they can be bio-based salts [77,78]. Cholinium amino acids, cholinium taurate, N-methyl morpholine-N-oxide monohydrate, 3-methyl-N-butylpyridinium chloride, and imidazole-based compounds (1-allyl-3-methylimidazolium chloride, 1-butyl-3-methylimidazolium chloride, 1-ethyl-3-methylimidazolium acetate, and 3-methyl-1-octylimidazolium hexafluorophosphate) are mainly used [78,90,94,95]. Typically, ILs have a low melting point (below 100 °C), are not volatile, non-flammable, thermally stable, and have a low vapor pressure [75,78]. Ionic liquids alter the biomass structure, disrupting the hydrogen bonds, degrading the non-covalent interactions between cellulose, hemicellulose, and lignin [96,97], and increasing the active surface area of biomass for microbial activity [75]. However, during the pre-treatment process, ILs become viscous, hampering the process [98]. Although bio-based, ILs are scarcely biodegradable and are undesirable for biotechnological processes; due to their high solubility and low volatility, they are persistent and toxic in the environment [77,78,95,99]. In particular, the imidazole-based compounds cause an inflammatory response in the gut of fish and have a neurotoxic effect on rats [99,100,101]. Therefore, they need to be recovered, even if the process is difficult and energy-intensive [78,95]. Ionic liquid pre-treatment was used on giant reed for bio-hydrogen production [102,103], whereas studies about biomethane production are still lacking.

5.3.8. Deep Eutectic Solvents

Deep eutectic solvents (DESs) are an emerging class of green compounds that are suitable as a pre-treatment method [104]. Deep eutectic solvents are similar to ILs but are non-toxic, inexpensive, biodegradable, and easy to prepare [99,104,105]. Deep eutectic solvents are a mixture of hydrogen bond donor (HBD) and hydrogen bond acceptor (HBA) compounds [78,99]. This combination abnormally lowers the melting point at the “eutectic” point, even at room temperature [99]. Typical DES mixtures are composed of naturally derived compounds, such as quaternary ammonium salts, amides, amino acids, carboxylic acids, and polyalcohols [78,104]. Deep eutectic solvents have solvation properties that enhance the solubilization of lignin polymers without affecting cellulose [106,107]. However, DESs were only recently used in pre-treating lignocellulosic biomass for biotechnological processes [104,107], but specific studies on giant reed are still missing.

5.4. Biological Pre-Treatment

Biological pre-treatments are based on bacteria (hydrolysis and ensilage), fungi, and selected commercial enzymes. Obviously, all the biological pre-treatments exploit the activities of the enzymes. The biological pre-treatment is considered environmentally friendly due to the utilization of unharmful biological compounds or organisms, and it does not release inhibitory by-products [3,75,76,77,108].

5.4.1. Ensilage

Ensilage is a traditional method of biomass storage that recently was proposed as a pre-treatment method [6]. Ensilage facilitates the conversion of structural carbohydrates (holocellulose) into lactic and acetic acids and ethanol [6]. Nevertheless, the bacteria involved in the ensilage are not able to degrade the lignin [6]. The formation of lactic and acetic acids, as well as ethanol, can improve both the kinetics and the quality of the biogas thanks to the biochemistry that implies the methanogenesis of these acids [109]. This effect of lactic acid has also been observed in ensiled giant reed [110]. Methane yield increases of 18 and 14% in batch mesophilic conditions were reported by applying ensilage as a pre-treatment of the giant reed biomass [39,40].

5.4.2. Fungal Pre-Treatment

Some wood-decay fungi can be utilized for biomass pre-treatment. They can be divided into white-, brown-, and soft-rot fungi, depending on the type of decay they cause [3,75,76,77]. These fungi secrete several types of enzymes, notably laccase, lignin peroxidase, manganese peroxidase, aryl alcohol oxidase, glyoxal oxidase, copper oxidase, pectinase, and cellulase [76,78,111] (Figure 7). Soft-rot fungi belong to Ascomycota. They produce cellulase and are not efficient in de-lignifying biomass. White- and brown-rot fungi belong to Basidiomycota. While white-rot fungi secrete ligninolytic extracellular oxidative enzymes, brown-rot fungi do not. Indeed, brown-rot fungi are characterized by the ability to degrade holocellulose and less extensive demethylation of lignin. Thus, only white-rot fungi are efficient in lignin degradation [50,112,113]. Fungal pre-treatment is economic, has low energy and water demands, and generates low or no inhibitor amounts for the subsequent biotechnological processes [77,78]. Nevertheless, a large pre-treatment area and a long time are necessary for such pre-treatment [75,77,78].
Data reported for fungal pre-treatment of giant reed with white-rot fungi are conflicting. In mesophilic batch conditions, Liu et al. [39] reported a −7.6% methane yield in comparison with untreated giant reed using Ceriporiopsis subvermispora. Similarly, in mesophilic batch conditions, Irpex lacteus showed a −27% methane yield in comparison to the untreated giant reed [31]. In contrast, in the same batch conditions, Pleurotus ostereatus increased the methane yield by 34% [31]. It is important to highlight that the methane yield reported in the latter study for both the untreated and the fungal pre-treatment was very low (98 mL and 131 mL CH4 g−1 VS, respectively) in comparison to the values reported in the literature for untreated giant reed in mesophilic batch conditions (144–234 mL CH4 g−1 VS) [24,28,35,38,39,40,114,115]. The time adopted in these fungal pre-treatments was relatively short (30 days) [31,39]; in addition, it is necessary to test further fungal strains to find the most effective in pre-treating the giant reed biomass.

5.4.3. Enzymatic Pre-Treatment for Anaerobic Digestion

The enzymatic pre-treatment consists of the direct addition of commercially available cellulase, α-amylase, β-glucosidase, and endo-xylanase, as well as marginal laccase, laccase peroxidase, and manganese peroxidase [45,111]. These enzymes break down the polymeric structure of both cellulose and hemicellulose into cellobiose, glucose, arabinose, and xylose (Figure 8).
The major advantage of enzymatic pre-treatment is the selective action on the depolymerization of holocellulose without any sugar loss [3], whereas the large quantities of enzymes, the shelf-life, the costs, and the low reusability are the major issues for the enzymatic pre-treatment [75,78]. Nevertheless, enzymatic pre-treatment is seldom used in the AD process since it only marginally affects methanogenesis [3] without significant differences between active or heat-inactivated enzymes added to wheat straw [116]. Because the enzymatic pre-treatment decomposes the holocellulose into simple sugars (hexoses and pentoses), it is more suitable for bio-hydrogen production. Moreover, the hydrogen production stage in DF can be considered a bacterial pre-treatment for methanogenesis. In fact, during DF, by-products such as VFAs, ethanol, and lactic acids are produced by the same bacteria that are involved in the AD process [72,117,118,119]. The DF by-products have a higher biomethanation potential than holocellulose itself [109,120].

5.4.4. Enzymatic and Hybrid Pre-Treatments for Dark and Photo-Fermentation

Both PF and DF were studied for H2 production from giant reed biomass (Table 3). Before the H2 production, enzymatic hydrolysis is mandatory; in some cases, one or two pre-treatments were combined with the enzymatic hydrolysis in a hybrid system (Table 3).
On average, DF showed a higher H2 yield in comparison to PF (217 vs. 86 mL H2 g−1 VS; Table 3).
Direct enzymatic pre-treatment could be enough to obtain adequate H2 yield from giant reed biomass both in DF and PF (Table 3). Nevertheless, a hybrid system should allow for an increase in the sugar yield from the biomass and, in turn, the H2 yield [52,123]. For example, in PF, hybrid NaOH + enzymatic pre-treatment increased the H2 yield by 69% in comparison to enzyme pre-treatment alone [41], whereas when applying a hybrid [Bmim]HSO4 + enzymatic pre-treatment, the H2 yield was 36% higher than using only direct enzyme addition [102].
On the other hand, in a hybrid system, a detoxification step is usually performed before the enzymatic hydrolysis and DF to remove possible inhibitors, such as furfurals and phenols, that are released in the liquid phase due to the pre-treatment [52,58,79]. Such a detoxification step generates liquid waste that has to be managed. In DF, a high inhibitory effect was reported for the furfurals released after the steam explosion used for the giant reed pre-treatment [83,84,85]. Indeed, the H2 yield from the giant reed directly enzymatically hydrolyzed was 18% higher in comparison to steam-exploded giant reed followed by enzymatic hydrolysis (Table 3) [85]. A low concentration of furfurals and 5-HMF (0.2 g L−1) can improve PF, whereas a higher concentration has a detrimental effect [124]. Vasmara and colleagues [29] reported that the adjustment of the pH recycling the black liquor derived from NaOH pre-treatment did not inhibit DF, despite its high polyphenol concentration.
This is hardly a surprise because it is widely known that in suitable conditions, the phenolic compounds are degraded into benzoate or caproate by Clostridia [125,126]. The latter compounds can be transformed in CH4 during the AD process [79]. An improvement in the fermentation process can be helpful to enhance H2 yield, both in DF and PF. For instance, in DF the initial pH of 8.7 enhanced the H2 yield by 36% compared to the unadjusted initial pH (5.3) [29]. In PF, the addition of glycerol (15 g L−1) allowed for an H2 yield improvement of almost fourfold [121]. The highest H2 yield in DF (363 mL H2 g−1 VS) was obtained with a pre-treated inoculum adapted after three sequential batch fermentations on giant reed hydrolyzate [85]. In PF, the highest H2 yield (126 mL H2 g−1 VS) was obtained with a light-intensity perturbation from 3000 to 6000 lux [122].

6. Concluding Remarks, Challenges, and Recommendations

This review highlights that alkali pre-treatment is the most effective at improving the anaerobic degradation process of giant reed biomass among the diverse methods studied.
Considering that all studies reported in the literature were carried out in laboratory batch mode, a scale-up of the processes is strongly needed in view of the practical applications. This would also allow for a better evaluation of energy efficiency, as well as economic and environmental issues.
Several kinds of pre-treatment still have to be explored for giant reed to improve biogas production. In particular, biological pre-treatment based on fungi (notably white-rot fungi) can be regarded as one of the most promising and merits further scrutiny. Several advantages and disadvantages can be identified for such a pre-treatment, as follows:
Advantages: (i) it is monetarily inexpensive; (ii) little energy and water are required; (iii) no waste is generated; (iv) little, if any, inhibitors for subsequent processes are generated.
Disadvantages: (i) large areas for pre-treatment are needed and (ii) long pre-treatment times are required (several weeks).
These issues of large areas and long pre-treatment times are not unbeatable. On the one hand, large storage areas are needed anyway in the biogas plants and the timespan for a typical AD process of lignocellulosic biomass is on the order of 60–90 days; hence, there is no urgency to have freshly pre-treated material.
An interesting challenge for the valorization of giant reed biomass is the implementation of a two-stage AD process. In this process, DF (producing H2) is separated from methanogenesis. Thus, H2 can be valorized as fuel gas, whereas the by-products (VFAs, ethanol) of DF can be exploited in the subsequent methanogenesis stage, enhancing the CH4 yield.
Similarly, DF can be coupled with PF to increase the overall H2 production. In fact, the bacteria involved in the PF process produce H2 from acetic acid generated in the DF process, whereas the other by-products of DF can be exploited in a bio-refinery process.
Another challenge is coupling the pre-treatment of giant reed biomass and co-digestion with animal waste. This is a promising way to enhance CH4 production while keeping the reactor volume constant.

Funding

This research was funded by the Italian Ministry of Agricultural, Food and Forestry Policies (MiPAAF) under the AGROENER project (D.D. n. 26329, 1 April 2016), http://agroener.crea.gov.it.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Scarlat, N.; Dallemand, J.F.; Fahl, F. Biogas: Developments and perspectives in Europe. Renew. Energy 2018, 129, 457–472. [Google Scholar] [CrossRef]
  2. Gray, N.; McDonagh, S.; O’Shea, R.; Smyth, B.; Murphy, J.D. Decarbonising ships, planes and trucks: An analysis of suitable low-carbon fuels for the maritime, aviation and haulage sectors. Adv. Appl. Energy 2021, 1, 100008. [Google Scholar] [CrossRef]
  3. Khan, M.U.; Usman, M.; Ashraf, M.A.; Dutta, N.; Luo, G.; Zhang, S. A review of recent advancements in pretreatment techniques of lignocellulosic materials for biogas production: Opportunities and limitations. Chem. Eng. J. Adv. 2022, 10, 100263. [Google Scholar] [CrossRef]
  4. Beig, A.R.; Muyeen, S.M. Wind energy. In Electric Renewable Energy Systems; Rashid, M.H., Ed.; Academic Press: Cambridge, MA, USA; Elsevier: Amsterdam, The Netherlands, 2016; pp. 60–77. [Google Scholar] [CrossRef]
  5. Deolalkar, S.P. Solar Power. In Designing Green Cement Plants; Deolalkar, S.P., Ed.; Butterworth-Heinemann: Oxford, UK; Elsevier: Amsterdam, The Netherlands, 2016; pp. 251–258. [Google Scholar] [CrossRef]
  6. Abraham, A.; Mathew, A.K.; Park, H.; Choi, O.; Sindhu, R.; Parameswaran, B.; Pandey, A.; Park, J.H.; Sang, B.I. Pretreatment Strategies for Enhanced Biogas Production from Lignocellulosic Biomass. Bioresour. Technol. 2020, 301, 122725. [Google Scholar] [CrossRef] [PubMed]
  7. Koszel, M.; Lorencowicz, E. Agricultural Use of Biogas Digestate as a Replacement Fertilizers. Agric. Agric. Sci. Procedia 2015, 7, 119–124. [Google Scholar] [CrossRef] [Green Version]
  8. Guo, M.; Song, W.; Buhain, J. Bioenergy and biofuels: History, status, and perspective. Renew. Sust. Energ. Rev. 2015, 42, 712–725. [Google Scholar] [CrossRef]
  9. Kögel-Knabner, I.; Amelung, W. Dynamics, chemistry, and preservation of organic matter in soils. In Treatise on Geochemistry, 2nd ed.; Holland, H.D., Turekian, K.K., Eds.; Elsevier: Amsterdam, The Netherlands, 2014; pp. 157–215. [Google Scholar] [CrossRef]
  10. Jones, D.; Ormondroyd, G.O.; Curling, S.F.; Popescu, C.M.; Popescu, M.C. Chemical compositions of natural fibres. In Advanced High Strength Natural Fibre Composites in Construction; Fan, M., Fu, F., Eds.; Woodhead Publishing: Sawston, UK, 2017; pp. 23–58. [Google Scholar] [CrossRef]
  11. Scordia, D.; Cosentino, S.L. Perennial Energy Grasses: Resilient Crops in a Changing European Agriculture. Agriculture 2019, 9, 169. [Google Scholar] [CrossRef] [Green Version]
  12. Lewandowski, I.; Scurlock, J.M.; Lindvall, E.; Christou, M. The development and current status of perennial rhizomatous grasses as energy crops in the US and Europe. Biomass Bioenergy 2003, 25, 335–361. [Google Scholar] [CrossRef]
  13. Fike, J.H.; Parrish, D.J.; Fike, W.B. Sustainable cellulosic grass crop production. In Biofuel Crop Sustainability, 1st ed.; Singh, B.P., Ed.; John Wiley & Sons: Chichester, UK, 2013; pp. 109–164. [Google Scholar] [CrossRef]
  14. Ceotto, E.; Di Candilo, M. Shoot Cuttings Propagation of Giant Reed (Arundo donax L.) in Water and Moist Soil: The Path Forward? Biomass Bioenergy 2010, 34, 1614–1623. [Google Scholar] [CrossRef]
  15. Cappelli, G.A.; Ginaldi, F.; Fanchini, D.; Corinzia, S.A.; Cosentino, S.L.; Ceotto, E. Model-Based Assessment of Giant Reed (Arundo donax L.) Energy Yield in the Form of Diverse Biofuels in Marginal Areas of Italy. Land 2021, 10, 548. [Google Scholar] [CrossRef]
  16. Webster, R.J.; Driever, S.M.; Kromdijk, J.; McGrath, J.; Leakey, A.D.B.; Siebke, K.; Demetriades-Shah, T.; Bonnage, S.; Peloe, T.; Lawson, T.; et al. High C3 photosynthetic capacity and high intrinsic water use efficiency underlies the high productivity of the bioenergy grass Arundo donax. Sci. Rep. 2016, 6, 20694. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  17. Nocentini, A.; Monti, A. Land-use change from poplar to switchgrass and giant reed increases soil organic carbon. Agron. Sustain. Dev. 2017, 37, 23. [Google Scholar] [CrossRef] [Green Version]
  18. Ceotto, E.; Marchetti, R.; Castelli, F. Residual soil nitrate as affected by giant reed cultivation and cattle slurry fertilisation. Ital. J. Agron. 2018, 18, 317–323. [Google Scholar] [CrossRef]
  19. Pilu, R.; Bucci, A.; Badone, F.C.; Landoni, M. Giant reed (Arundo donax L.): A weed plant or a promising energy crop? Afr. J. Biotechnol. 2012, 11, 9163–9174. Available online: https://academicjournals.org/journal/AJB/article-full-text-pdf/1ED654039385 (accessed on 2 December 2022).
  20. Antal, G. Giant reed (Arundo donax L.) from ornamental plant to dedicated bioenergy species: Review of economic prospects of biomass production and utilization. Int. J. Hortic. Sci. 2018, 24, 39–46. [Google Scholar] [CrossRef] [Green Version]
  21. Angelini, L.G.; Ceccarini, L.; Nassi o Di Nasso, N.; Bonari, E. Comparison of Arundo donax L. and Miscanthus x Giganteus in a Long-Term Field Experiment in Central Italy: Analysis of Productive Characteristics and Energy Balance. Biomass Bioenergy 2009, 33, 635–643. [Google Scholar] [CrossRef]
  22. Cosentino, S.L.; Copani, V.; D’Agosta, G.M.; Sanzone, E.; Mantineo, M. First Results on Evaluation of Arundo donax L. Clones Collected in Southern Italy. Ind. Crops Prod. 2006, 23, 212–222. [Google Scholar] [CrossRef]
  23. Nassi o Di Nasso, N.; Roncucci, N.; Bonari, E. Seasonal Dynamics of Aboveground and Belowground Biomass and Nutrient Accumulation and Remobilization in Giant Reed (Arundo donax L.): A Three-Year Study on Marginal Land. Bioenergy Res. 2013, 6, 725–736. [Google Scholar] [CrossRef]
  24. Ceotto, E.; Vasmara, C.; Marchetti, R.; Cianchetta, S.; Galletti, S. Biomass and methane yield of giant reed (Arundo donax L.) as affected by single and double annual harvest. GCB Bioenergy 2021, 13, 393–407. [Google Scholar] [CrossRef]
  25. Idris, S.M.; Jones, P.L.; Salzman, S.A.; Croatto, G.; Allinson, G. Evaluation of the Giant Reed (Arundo donax) in Horizontal Subsurface Flow Wetlands for the Treatment of Recirculating Aquaculture System Effluent. Environ. Sci. Pollut. Res. 2012, 19, 1159–1170. [Google Scholar] [CrossRef]
  26. Jámbor, A.; Török, Á. The Economics of Arundo donax—A Systematic Literature Review. Sustainability 2019, 11, 4225. [Google Scholar] [CrossRef] [Green Version]
  27. Jiang, D.; Zhang, X.; Jing, Y.; Zhang, T.; Shui, X.; Yang, J.; Lu, C.; Chen, Z.; Lei, T.; Zhang, Q. Towards High Light Conversion Efficiency from Photo-Fermentative Hydrogen Production of Arundo Donax, L. By Light–Dark Duration Alternation Strategy. Bioresour. Technol. 2022, 344, 126302. [Google Scholar] [CrossRef] [PubMed]
  28. Vasmara, C.; Cianchetta, S.; Marchetti, R.; Ceotto, E.; Galletti, S. Potassium Hydroxyde Pre-TreatmentEnhance sMethane Yield from Giant Reed (Arundo donax L.). Energies 2021, 14, 630. [Google Scholar] [CrossRef]
  29. Vasmara, C.; Cianchetta, S.; Marchetti, R.; Ceotto, E.; Galletti, S. Hydrogen Production from Enzymatic Hydrolysates of Alkali Pre-Treated Giant Reed (Arundo donax L.). Energies 2022, 15, 4876. [Google Scholar] [CrossRef]
  30. Cianchetta, S.; Polidori, N.; Vasmara, C.; Ceotto, E.; Marchetti, R.; Galletti, S. Single cell oil production from hydrolysates of alkali pre-treated giant reed: High biomass-to-lipid yields with selected yeasts. Ind. Crops Prod. 2022, 178, 114596. [Google Scholar] [CrossRef]
  31. Piccitto, A.; Scordia, D.; Corinzia, S.A.; Cosentino, S.L.; Testa, G. Advanced Biomethane Production from Biologically Pretreated Giant Reed under Different Harvest Times. Agronomy 2022, 12, 712. [Google Scholar] [CrossRef]
  32. Cosentino, S.L.; Sanzone, E.; Bellomia, L.; Sortino, O.; Belligno, A. Chemical composition and energetic value of perennial lignocellulosic species (Miscanthus x giganteus and Arundo donax L.) grown in Mediterranean region. Proceeding of the 15th European Biomass Conference & Exhibition, Berlin, Germany, 7–11 May 2007; pp. 820–823. [Google Scholar]
  33. Dell’Omo, P.P.; Spena, V.A. Mechanical Pretreatment of Lignocellulosic Biomass to Improve Biogas Production: Comparison of Results for Giant Reed and Wheat Straw. Energy 2020, 203, 117798. [Google Scholar] [CrossRef]
  34. Di Girolamo, G.; Grigatti, M.; Barbanti, L.; Angelidaki, I. Effects of Hydrothermal Pre-Treatments on Giant Reed (Arundo donax) Methane Yield. Bioresour. Technol. 2013, 147, 152–159. [Google Scholar] [CrossRef] [PubMed]
  35. Di Girolamo, G.; Bertin, L.; Capecchi, L.; Ciavatta, C.; Barbanti, L. Mild Alkaline Pre-Treatments Loosen Fibre Structure Enhancing Methane Production from Biomass Crops and Residues. Biomass Bioenergy 2014, 71, 318–329. [Google Scholar] [CrossRef]
  36. Shatalov, A.A.; Pereira, H. High-Grade Sulfur-Free Cellulose Fibers by Pre-Hydrolysis and Ethanol-Alkali Delignification of Giant Reed (Arundo donax L.) Stems. Ind. Crops Prod. 2013, 43, 623–630. [Google Scholar] [CrossRef]
  37. Komolwanich, T.; Tatijarern, P.; Prasertwasu, S.; Khumsupan, D.; Chaisuwan, T.; Luengnaruemitchai, A.; Wongkasemjit, S. Comparative Potentiality of Kans Grass (Saccharum spontaneum) and Giant Reed (Arundo donax) as Lignocellulosic Feedstocks for the Release of Monomeric Sugars by Microwave/Chemical Pretreatment. Cellulose 2014, 21, 1327–1340. [Google Scholar] [CrossRef]
  38. Jiang, D.; Ge, X.; Zhang, Q.; Zhou, X.; Chen, Z.; Keener, H.; Li, Y. Comparison of Sodium Hydroxide and Calcium Hydroxide Pretreatments of Giant Reed for Enhanced Enzymatic Digestibility and Methane Production. Bioresour. Technol. 2017, 244, 1150–1157. [Google Scholar] [CrossRef] [PubMed]
  39. Liu, S.; Xu, F.; Ge, X.; Li, Y. Comparison between Ensilage and Fungal Pretreatment for Storage of Giant Reed and Subsequent Methane Production. Bioresour. Technol. 2016, 209, 246–253. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  40. Liu, S.; Ge, X.; Liew, L.N.; Liu, Z.; Li, Y. Effect of Urea Addition on Giant Reed Ensilage and Subsequent Methane Production by Anaerobic Digestion. Bioresour. Technol. 2015, 192, 682–688. [Google Scholar] [CrossRef] [Green Version]
  41. Jiang, D.; Ge, X.; Zhang, Q.; Li, Y. Comparison of Liquid Hot Water and Alkaline Pretreatments of Giant Reed for Improved Enzymatic Digestibility and Biogas Energy Production. Bioresour. Technol. 2016, 216, 60–68. [Google Scholar] [CrossRef] [Green Version]
  42. Jiang, D.; Ge, X.; Zhang, T.; Chen, Z.; Zhang, Z.; He, C.; Zhang, Q.; Li, Y. Effect of Alkaline Pretreatment on Photo-Fermentative Hydrogen Production from Giant Reed: Comparison of NaOH and Ca(OH)2. Bioresour. Technol. 2020, 304, 123001. [Google Scholar] [CrossRef]
  43. Van Soest, P.J.; Robertson, J.B.; Lewis, B.A. Methods for dietary fiber, neutral-detergent fiber and non-starch polysaccharides in relation to animal nutrition. J. Dairy Sci. 1991, 74, 3583–3597. [Google Scholar] [CrossRef]
  44. Sluiter, J.B.; Sluiter, A.D. Summative Mass Closure: Laboratory Analytical Procedure (LAP) Review and Integration: Feedstocks. NREL/TP-510-48087. Golden, CO: 2010, National Renewable Energy Laboratory. Available online: http://www.nrel.gov/biomass/analytical_procedures.html (accessed on 20 December 2022).
  45. Tišma, M.; Bucic-Kojic, A.; Planinic, M. Bio-Based Products from Lignocellulosic Waste Biomass: A State of the Art. Chem. Biochem. Eng. Q. 2021, 35, 139–156. [Google Scholar] [CrossRef]
  46. Song, Z.; Yang, G.; Guo, Y.; Zhang, T. Comparison of two chemical pretreatments of rice straw for biogas production by anaerobic digestion. Bioresources 2012, 7, 3223–3236. Available online: https://bioresources.cnr.ncsu.edu/wp-content/uploads/2016/06/BioRes_07_3_3223_Song_Comparative_Pretreat_Straw_Digestion_2830.pdf (accessed on 20 December 2022).
  47. Haque, S.; Singh, R.; Pal, D.B.; Harakeh, S.; Alghanmi, M.; Teklemariam, A.D.; Abujamel, T.S.; Srivastava, N.; Gupta, V.K. Recent Update on Anaerobic Digestion of Paddy Straw for Biogas Production: Advancement, Limitation and Recommendations. Environ. Res. 2022, 215, 114292. [Google Scholar] [CrossRef]
  48. Achinas, S.; Achinas, V.; Euverink, G.J.W. A technological overview of biogas production from biowaste. Engineering 2017, 3, 299–307. [Google Scholar] [CrossRef]
  49. Kovačić, Đ.; Kralik, D.; Rupcic, S.; Jovicic, D.; Spajić, R.; Tišma, M. Soybean straw, corn stover and sunflower stalk as possible substrates for biogas production in Croatia: A review. Chem. Biochem. Eng. Q. 2017, 31, 187–198. [Google Scholar] [CrossRef]
  50. Wagner, A.O.; Lackner, N.; Mutschlechner, M.; Prem, E.M.; Markt, R.; Illmer, P. Biological pretreatment strategies for second-generation lignocellulosic resources to enhance biogas production. Energies 2018, 11, 1797. [Google Scholar] [CrossRef] [Green Version]
  51. Monlau, F.; Barakat, A.; Trably, E.; Dumas, C.; Steyer, J.P.; Carrère, H. Lignocellulosic Materials into Biohydrogen and Biomethane: Impact of Structural Features and Pretreatment. Crit. Rev. Environ. Sci. Technol. 2013, 43, 260–322. [Google Scholar] [CrossRef]
  52. Singh, H.; Tomar, S.; Qureshi, K.A.; Jaremko, M.; Rai, P.K. Recent Advances in Biomass Pretreatment Technologies for Biohydrogen Production. Energies 2022, 15, 999. [Google Scholar] [CrossRef]
  53. Neshat, S.A.; Mohammadi, M.; Najafpour, G.D.; Lahijani, P. Anaerobic Co-Digestion of Animal Manures and Lignocellulosic Residues as a Potent Approach for Sustainable Biogas Production. Renew. Sustain. Energy Rev. 2017, 79, 308–322. [Google Scholar] [CrossRef]
  54. Sun, L.; Pope, P.B.; Eijsink, V.G.H.; Schnürer, A. Characterization of Microbial Community Structure during Continuous Anaerobic Digestion of Straw and Cow Manure. Microb. Biotechnol. 2015, 8, 815–827. [Google Scholar] [CrossRef] [PubMed]
  55. Tsapekos, P.; Kougias, P.G.; Treu, L.; Campanaro, S.; Angelidaki, I. Process Performance and Comparative Metagenomic Analysis during Co-Digestion of Manure and Lignocellulosic Biomass for Biogas Production. Appl. Energy 2017, 185, 126–135. [Google Scholar] [CrossRef]
  56. Buan, N.; Kulkarni, G.; Metcalf, W. Genetic Methods for Methanosarcina Species. In Methods Enzymology; Rosenzweig, A.C., Ragsdale, S.W., Eds.; Academic Press: Cambridge, MA, USA; Elsevier: Amsterdam, The Netherlands, 2011; Volume 449, pp. 23–42. [Google Scholar] [CrossRef]
  57. Saha, R.; Bhattacharya, D.; Mukhopadhyay, M. Enhanced Production of Biohydrogen from Lignocellulosic Feedstocks Using Microorganisms: A Comprehensive Review. Energy Convers. Manag. X 2022, 13, 100153. [Google Scholar] [CrossRef]
  58. Bhatia, S.K.; Jagtap, S.S.; Bedekar, A.A.; Bhatia, R.K.; Rajendran, K.; Pugazhendhi, A.; Rao, C.V.; Atabani, A.E.; Kumar, G.; Yang, Y.H. Renewable Biohydrogen Production from Lignocellulosic Biomass Using Fermentation and Integration of Systems with Other Energy Generation Technologies. Sci. Total Environ. 2021, 765, 144429. [Google Scholar] [CrossRef]
  59. Singh, N.; Sarma, S. Biological Routes of Hydrogen Production: A Critical Assessment. In Handbook of Biofuels; Sahay, S., Ed.; Academic Press: Cambridge, MA, USA; Elsevier: Amsterdam, The Netherlands, 2022; pp. 419–434. [Google Scholar] [CrossRef]
  60. Dalena, F.; Senatore, A.; Tursi, A.; Basile, A. Bioenergy Production from Second- and Third-Generation Feedstocks. In Bioenergy Systems for the Future: Prospects for Biofuels and Biohydrogen; Dalena, F., Basile, A., Rossi, C., Eds.; Woodhead Publishing: Sawston, UK, 2017; pp. 559–599. [Google Scholar] [CrossRef]
  61. Chozhavendhan, S.; Rajamehala, M.; Karthigadevi, G.; Praveenkumar, R.; Bharathiraja, B. A Review on Feedstock, Pretreatment Methods, Influencing Factors, Production and Purification Processes of Bio-Hydrogen Production. Case Stud. Chem. Environ. Eng. 2020, 2, 100038. [Google Scholar] [CrossRef]
  62. Cheonh, P.Y.Y.; Kansedo, J.; Lau, J.S.Y.; Tan, Y.H. Renewable Biomass Wastes for Biohydrogen Production. In Comprehensive Renewable Energy, 2nd ed.; Letcher, T.M., Ed.; Elsevier: Amsterdam, The Netherlands, 2022; pp. 273–298. [Google Scholar] [CrossRef]
  63. Bharathiraja, B.; Sudharsanaa, T.; Bharghavi, A.; Jayamuthunagai, J.; Praveenkumar, R. Biohydrogen and Biogas—An Overview on Feedstocks and Enhancement Process. Fuel 2016, 185, 810–828. [Google Scholar] [CrossRef]
  64. Sağır, E.; Hallenbeck, P.C. Photofermentative Hydrogen Production. In Biohydrogen, 2nd ed.; Pandey, A., Mohan, S.V., Chang, J.-S., Hallenbeck, P.C., Larroche, C., Eds.; Elsevier: Amsterdam, The Netherlands, 2019; pp. 141–157. [Google Scholar] [CrossRef]
  65. Zhang, Q.; Zhang, Z. Biological Hydrogen Production From Renewable Resources by Photofermentation. In Advances in Bioenergy; Li, Y., Ge, X., Eds.; Elsevier: Amsterdam, The Netherlands, 2018; Volume 3, pp. 137–160. [Google Scholar] [CrossRef]
  66. Veeravalli, S.S.; Shanmugam, S.R.; Ray, S.; Lalman, J.A.; Biswas, N. Biohydrogen Production From Renewable Resources. In Advanced Bioprocessing for Alternative Fuels, Biobased Chemicals, and Bioproducts: Technologies and Approaches for Scale-Up and Commercialization; Hosseini, M., Ed.; Woodhead Publishing: Sawston, UK, 2019; pp. 289–312. [Google Scholar] [CrossRef]
  67. Koutra, E.; Tsafrakidou, P.; Sakarika, M.; Kornaros, M. Microalgal Biorefinery. In Microalgae Cultivation for Biofuels Production; Yousuf, A., Ed.; Academic Press: Cambridge, MA, USA; Elsevier: Amsterdam, The Netherlands, 2020; pp. 163–185. [Google Scholar] [CrossRef]
  68. Kamran, M. Bioenergy. In Renewable Energy Conversion Systems; Kamran, M., Fazal, M.R., Eds.; Academic Press: Cambridge, MA, USA; Elsevier: Amsterdam, The Netherlands, 2021; pp. 243–264. [Google Scholar] [CrossRef]
  69. Ferreira, A.; Gouveia, L. Microalgal Biorefineries. In Handbook of Microalgae-Based Processes and Products: Fundamentals and Advances in Energy, Food, Feed, Fertilizer, and Bioactive Compounds; Jacob-Lopes, E., Manzoni Maroneze, M., Queiroz, M.I., Queiroz Zepka, L., Eds.; Academic Press: Cambridge, MA, USA; Elsevier: Amsterdam, The Netherlands, 2020; pp. 771–798. [Google Scholar]
  70. Vasmara, C. Biohydrogen Production from Cheese Factory Waste. Ph.D. Dissertation, Alma Mater Studiorum University of Bologna, Bologna, Italy, 2018. [Google Scholar] [CrossRef]
  71. Chou, C.J.; Jenney, F.E.; Adams, M.W.W.; Kelly, R.M. Hydrogenesis in Hyperthermophilic Microorganisms: Implications for Biofuels. Metab. Eng. 2008, 10, 394–404. [Google Scholar] [CrossRef] [PubMed]
  72. Vasmara, C.; Marchetti, R. Initial pH influences in-batch hydrogen production from scotta permeate. Int. J. Hydrog. Energy 2017, 42, 14400–14408. [Google Scholar] [CrossRef]
  73. Sarangi, P.K.; Nanda, S. Biohydrogen production through dark fermentation. Chem. Eng. Technol. 2020, 43, 601–612. [Google Scholar] [CrossRef]
  74. Karuppiah, T.; Azariah, V.E. Biomass Pretreatment for Enhancement of Biogas Production. In Anaerobic Digestion; Banu, J.R., Ed.; IntechOpen: London, UK, 2019; pp. 1–22. [Google Scholar] [CrossRef] [Green Version]
  75. Atelge, M.R.; Atabani, A.E.; Banu, J.R.; Krisa, D.; Kaya, M.; Eskicioglu, C.; Kumar, G.; Lee, C.; Yildiz, Y.; Unalan, S.; et al. A Critical Review of Pretreatment Technologies to Enhance Anaerobic Digestion and Energy Recovery. Fuel 2020, 270, 117494. [Google Scholar] [CrossRef]
  76. Hernández-Beltrán, J.U.; Hernández-De Lira, I.O.; Cruz-Santos, M.M.; Saucedo-Luevanos, A.; Hernández-Terán, F.; Balagurusamy, N. Insight into Pretreatment Methods of Lignocellulosic Biomass to Increase Biogas Yield: Current State, Challenges, and Opportunities. Appl. Sci. 2019, 9, 3721. [Google Scholar] [CrossRef] [Green Version]
  77. Mohammad Rahmani, A.; Gahlot, P.; Moustakas, K.; Kazmi, A.A.; Shekhar Prasad Ojha, C.; Tyagi, V.K. Pretreatment Methods to Enhance Solubilization and Anaerobic Biodegradability of Lignocellulosic Biomass (Wheat Straw): Progress and Challenges. Fuel 2022, 319, 123726. [Google Scholar] [CrossRef]
  78. Kumar, B.; Bhardwaj, N.; Agrawal, K.; Chaturvedi, V.; Verma, P. Current Perspective on Pretreatment Technologies Using Lignocellulosic Biomass: An Emerging Biorefinery Concept. Fuel Process. Technol. 2020, 199, 106244. [Google Scholar] [CrossRef]
  79. Monlau, F.; Sambusiti, C.; Barakat, A.; Quéméneur, M.; Trably, E.; Steyer, J.P.; Carrère, H. Do furanic and phenolic compounds of lignocellulosic and algae biomass hydrolyzate inhibit anaerobic mixed cultures? A comprehensive review. Biotechnol. Adv. 2014, 2, 934–951. [Google Scholar] [CrossRef]
  80. Paul, S.; Dutta, A. Challenges and Opportunities of Lignocellulosic Biomass for Anaerobic Digestion. Resour. Conserv. Recycl. 2018, 130, 164–174. [Google Scholar] [CrossRef]
  81. da Costa Lopes, A.M.; João, K.G.; Rubik, D.F.; Bogel-Łukasik, E.; Duarte, L.C.; Andreaus, J.; Bogel-Łukasik, R. Pre-Treatment of Lignocellulosic Biomass Using Ionic Liquids: Wheat Straw Fractionation. Bioresour. Technol. 2013, 142, 198–208. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  82. Satlewal, A.; Agrawal, R.; Bhagia, S.; Sangoro, J.; Ragauskas, A.J. Natural Deep Eutectic Solvents for Lignocellulosic Biomass Pretreatment: Recent Developments, Challenges and Novel Opportunities. Biotechnol. Adv. 2018, 36, 2032–2050. [Google Scholar] [CrossRef] [PubMed]
  83. Toscano, G.; Zuccaro, G.; Ausiello, A.; Micoli, L.; Turco, M.; Pirozzi, D. Production of Hydrogen from Giant Reed by Dark Fermentation. Chem. Eng. Trans. 2014, 37, 331–336. [Google Scholar] [CrossRef]
  84. Ausiello, A.; Micoli, L.; Pirozzi, D.; Toscano, G.; Turco, M. Biohydrogen Production by Dark Fermentation of Arundo Donax for Feeding Fuel Cells. Chem. Eng. Trans. 2015, 43, 385–390. [Google Scholar] [CrossRef]
  85. Ausiello, A.; Micoli, L.; Turco, M.; Toscano, G.; Florio, C.; Pirozzi, D. Biohydrogen Production by Dark Fermentation of Arundo donax Using a New Methodology for Selection of H2-Producing Bacteria. Int. J. Hydrog. Energy 2017, 42, 30599–30612. [Google Scholar] [CrossRef]
  86. Singh, J.; Suhag, M.; Dhaka, A. Augmented Digestion of Lignocellulose by Steam Explosion, Acid and Alkaline Pretreatment Methods: A Review. Carbohydr. Polym. 2015, 117, 624–631. [Google Scholar] [CrossRef]
  87. Carlsson, M.; Lagerkvist, A.; Morgan-Sagastume, F. The Effects of Substrate Pre-Treatment on Anaerobic Digestion Systems: A Review. Waste Manag. 2012, 32, 1634–1650. [Google Scholar] [CrossRef] [PubMed]
  88. Appels, L.; Baeyens, J.; Degrève, J.; Dewil, R. Principles and Potential of the Anaerobic Digestion of Waste-Activated Sludge. Prog. Energy Combust. Sci. 2008, 34, 755–781. [Google Scholar] [CrossRef]
  89. Moset, V.; Xavier, C.A.N.; Feng, L.; Wahid, R.; Møller, H.B. Combined low thermal alkali addition and mechanical pre-treatment to improve biogas yield from wheat straw. J. Clean. Prod. 2018, 172, 1391–1398. [Google Scholar] [CrossRef]
  90. Paudel, S.R.; Banjara, S.P.; Choi, O.K.; Park, K.Y.; Kim, Y.M.; Lee, J.W. Pretreatment of Agricultural Biomass for Anaerobic Digestion: Current State and Challenges. Bioresour. Technol. 2017, 245, 1194–1205. [Google Scholar] [CrossRef] [PubMed]
  91. Galletti, S.; Cianchetta, S.; Righini, H.; Roberti, R. A Lignin-Rich Extract of Giant Reed (Arundo donax L.) as a Possible Tool to Manage Soilborne Pathogens in Horticulture: A Preliminary Study on a Model Pathosystem. Horticulturae 2022, 8, 589. [Google Scholar] [CrossRef]
  92. Mou, H.; Fardim, P.; Wu, S. A Novel Green Biomass Fractionation Technology: Hydrotropic Pretreatment. In Biomass Fractionation Technologies for a Lignocellulosic Feedstock Based Biorefinery; Mussatto, S.I., Ed.; Elsevier: Amsterdam, The Netherlands, 2016; pp. 281–313. [Google Scholar] [CrossRef]
  93. Devendra, L.P.; Kiran Kumar, M.; Pandey, A. Evaluation of Hydrotropic Pretreatment on Lignocellulosic Biomass. Bioresour. Technol. 2016, 213, 350–358. [Google Scholar] [CrossRef] [PubMed]
  94. Ren, H.; Zong, M.H.; Wu, H.; Li, N. Efficient pretreatment of wheat straw using novel renewable cholinium ionic liquids to improve enzymatic saccharification. Ind. Eng. Chem. Res. 2016, 55, 1788–1795. [Google Scholar] [CrossRef]
  95. Cao, X.; Li, H.; Liu, L.; Dong, W.; Zhao, W.; Zang, L. Imidazolium Ionic Liquids as Potential Persistent Pollutants Promote the Conversion of Waste Activated Sludge to Volatile Fatty Acids in Anaerobic Fermentation without Promoting Hydrogen Production. J. Clean. Prod. 2022, 373, 133972. [Google Scholar] [CrossRef]
  96. Alvira, P.; Tomás-Pejó, E.; Ballesteros, M.; Negro, M.J. Pretreatment Technologies for an Efficient Bioethanol Production Process Based on Enzymatic Hydrolysis: A Review. Bioresour. Technol. 2010, 101, 4851–4861. [Google Scholar] [CrossRef] [PubMed]
  97. Agbor, V.B.; Cicek, N.; Sparling, R.; Berlin, A.; Levin, D.B. Biomass Pretreatment: Fundamentals toward Application. Biotechnol. Adv. 2011, 29, 675–685. [Google Scholar] [CrossRef]
  98. Ninomiya, K.; Kamide, K.; Takahashi, K.; Shimizu, N. Enhanced Enzymatic Saccharification of Kenaf Powder after Ultrasonic Pretreatment in Ionic Liquids at Room Temperature. Bioresour. Technol. 2012, 103, 259–265. [Google Scholar] [CrossRef]
  99. Hansen, B.B.; Spittle, S.; Chen, B.; Poe, D.; Zhang, Y.; Klein, J.M.; Horton, A.; Adhikari, L.; Zelovich, T.; Doherty, B.W.; et al. Deep Eutectic Solvents: A Review of Fundamentals and Applications. Chem. Rev. 2021, 121, 1232–1285. [Google Scholar] [CrossRef]
  100. Chang, X.; Liu, P.; Feng, J.; Su, X.; Huang, M.; Chen, Y.; Zhang, J.; Li, B. Impact of Chronic Exposure to the Ionic Liquid ([C8mim][PF6]) on Intestinal Physical Barrier, Immunological Barrier and Gut Microbiota in Common Carp (Cyprinus carpio L.). Environ. Res. 2020, 189, 109919. [Google Scholar] [CrossRef]
  101. Su, X.; Li, W.; Li, Z.; Liu, K.; Song, M.; Shao, M.; Lv, L.; Chang, X. Chronic Developmental Exposure to Low-Dose ([C8mim][PF6]) Induces Neurotoxicity and Behavioural Abnormalities in Rats. Ecotoxicol. Environ. Saf. 2021, 225, 112806. [Google Scholar] [CrossRef] [PubMed]
  102. Chen, Z.; Jiang, D.; Zhang, T.; Lei, T.; Zhang, H.; Yang, J.; Shui, X.; Li, F.; Zhang, Y.; Zhang, Q. Comparison of Three Ionic Liquids Pretreatment of Arundo donax L. For Enhanced Photo-Fermentative Hydrogen Production. Bioresour. Technol. 2022, 343, 126088. [Google Scholar] [CrossRef] [PubMed]
  103. Zhang, Q.; Shui, X.; Kumar Awasthi, M.; Zhang, T.; Yang, J.; Zhang, H.; Chen, Z.; Zou, C.; Jiang, D. 1-Butyl-3-Methylimidazolium Acetate Pretreatment of Giant Reed Triggering Yield Improvement of Biohydrogen Production via Photo-Fermentation. Bioresour. Technol. 2022, 364, 128068. [Google Scholar] [CrossRef] [PubMed]
  104. Panić, M.; Andlar, M.; Tišma, M.; Rezić, T.; Šibalić, D.; Cvjetko Bubalo, M.; Radojčić Redovniković, I. Natural Deep Eutectic Solvent as a Unique Solvent for Valorisation of Orange Peel Waste by the Integrated Biorefinery Approach. Waste Manage. 2021, 120, 340–350. [Google Scholar] [CrossRef] [PubMed]
  105. Pandey, A.; Dhingra, D.; Pandey, S. Hydrogen bond donor/acceptor cosolvent-modified choline chloride-based deep eutectic solvents. J. Phys. Chem. B 2017, 121, 4202–4212. [Google Scholar] [CrossRef]
  106. Vigier, K.D.O.; Chatel, G.; Jerome, F. Contribution of deep eutectic solvents for biomass processing: Opportunities, challenges, and limitations. Chem. Cat. Chem. 2015, 7, 1250–1260. [Google Scholar] [CrossRef]
  107. Xu, G.C.; Ding, J.C.; Han, R.Z.; Dong, J.J.; Ni, Y. Enhancing Cellulose Accessibility of Corn Stover by Deep Eutectic Solvent Pretreatment for Butanol Fermentation. Bioresour. Technol. 2016, 203, 364–369. [Google Scholar] [CrossRef] [PubMed]
  108. Shrestha, S.; Fonoll, X.; Khanal, S.K.; Raskin, L. Biological Strategies for Enhanced Hydrolysis of Lignocellulosic Biomass during Anaerobic Digestion: Current Status and Future Perspectives. Bioresour. Technol. 2017, 245, 1245–1257. [Google Scholar] [CrossRef] [PubMed]
  109. Vasmara, C.; Marchetti, R.; Carminati, D. Wastewater from the production of lactic acid bacteria as feedstock in anaerobic digestion. Energy 2021, 229, 120740. [Google Scholar] [CrossRef]
  110. da Borso, F.; di Marzo, C.; Zuliani, F.; Danuso, F.; Baldini, M. Harvest Time and Ensilage Suitability of Giant Reed and Miscanthus for Bio-Methane Production and Characterization of Digestate for Agronomic Use. Agron. Res. 2018, 16, 22–40. [Google Scholar] [CrossRef]
  111. Kumar, A.; Chandra, R. Ligninolytic Enzymes and Its Mechanisms for Degradation of Lignocellulosic Waste in Environment. Heliyon 2020, 6, e03170. [Google Scholar] [CrossRef] [PubMed]
  112. Abdel-Hamid, A.M.; Solbiati, J.O.; Cann, I.K.O. Insights into Lignin Degradation and Its Potential Industrial Applications. In Advances in Applied Microbiology; Sariaslani, S., Gadd, G.M., Eds.; Academic Press: Cambridge, MA, USA; Elsevier: Amsterdam, The Netherlands, 2013; pp. 1–28. [Google Scholar] [CrossRef]
  113. Langer, G.J.; Bußkamp, J.; Terhonen, E.; Blumenstein, K. Fungi Inhabiting Woody Tree Tissues. In Forest Microbiology: Volume 1: Tree Microbiome: Phyllosphere, Endosphere and Rhizosphere; Asiegbu, F.O., Ed.; Elsevier Science & Technology: San Diego, CA, USA, 2021; pp. 175–205. [Google Scholar] [CrossRef]
  114. Yang, L.; Li, Y. Anaerobic Digestion of Giant Reed for Methane Production. Bioresour. Technol. 2014, 171, 233–239. [Google Scholar] [CrossRef] [PubMed]
  115. Shilpi, S.; Lamb, D.; Bolan, N.; Seshadri, B.; Choppala, G.; Naidu, R. Waste to Watt: Anaerobic Digestion of Wastewater Irrigated Biomass for Energy and Fertiliser Production. J. Environ. Manage. 2019, 239, 73–83. [Google Scholar] [CrossRef] [PubMed]
  116. Vasmara, C.; Cianchetta, S.; Marchetti, R.; Galletti, S. Biogas Production from Wheat Straw Pre-Treated with Hydrolytic Enzymes or Sodium Hydroxide. Environ. Eng. Manage. J. 2017, 16, 1827–1835. [Google Scholar] [CrossRef]
  117. Borja, R. Biogas Production. In Comprehensive Biotechnology, 2nd ed.; Moo-Young, M., Ed.; Academic Press: Cambridge, MA, USA; Elsevier: Amsterdam, The Netherlands, 2011; Volume 2, pp. 785–798. [Google Scholar] [CrossRef]
  118. Vasmara, C.; Pindo, M.; Micheletti, D.; Marchetti, R. Initial pH influences microbial communities composition in dark fermentation of scotta permeate. Int. J. Hydrogen Energy 2018, 43, 8707–8717. [Google Scholar] [CrossRef]
  119. Kamusoko, R.; Jingura, R.M.; Chikwambi, Z.; Parawira, W. Biogas: Microbiological Research to Enhance Efficiency and Regulation. In Handbook of Biofuels; Sahay, S., Ed.; Academic Press: Cambridge, MA, USA; Elsevier: Amsterdam, The Netherlands, 2022; pp. 485–497. [Google Scholar] [CrossRef]
  120. Li, W.; Khalid, H.; Zhu, Z.; Zhang, R.; Liu, G.; Chen, C.; Thorin, E. Methane Production through Anaerobic Digestion: Participation and Digestion Characteristics of Cellulose, Hemicellulose and Lignin. Appl. Energy 2018, 226, 1219–1228. [Google Scholar] [CrossRef]
  121. Jiang, D.; Zhang, X.; Ge, X.; Yue, T.; Zhang, T.; Zhang, Y.; Zhang, Z.; He, C.; Lu, C.; Zhang, Q. Insights into Correlation between Hydrogen Yield Improvement and Glycerol Addition in Photo-Fermentation of Arundo donax L. Bioresour. Technol. 2021, 321, 124467. [Google Scholar] [CrossRef] [PubMed]
  122. Shui, X.; Jiang, D.; Zhang, H.; Zhang, X.; Yang, J.; Lei, T.; Chen, Z.; Zhang, Q. Effect of Light Perturbation on the Photo-Fermentative Hydrogen Production of Biomass from Giant Reed. J. Clean. Prod. 2022, 351, 131481. [Google Scholar] [CrossRef]
  123. Ren, N.-Q.; Zhao, L.; Chen, C.; Guo, W.-Q.; Cao, G.-L. A review on bioconversion of lignocellulosic biomass to H2: Key challenges and new insights. Bioresour. Technol. 2016, 215, 92–99. [Google Scholar] [CrossRef]
  124. Yang, J.; Jiang, D.; Shui, X.; Lei, T.; Zhang, H.; Zhang, Z.; Zhang, X.; Zhu, S.; Zhang, Q. Effect of 5-HMF and Furfural Additives on Bio-Hydrogen Production by Photo-Fermentation from Giant Reed. Bioresour Technol 2022, 347, 126743. [Google Scholar] [CrossRef]
  125. Fang, H.H.P.; Liu, Y.; Ke, S.Z.; Zhang, T. Anaerobic Degradation of Phenol in Wastewater at Ambient Temperature. Water Sci. Technol. 2004, 49, 95–102. [Google Scholar] [CrossRef] [PubMed]
  126. Fang, H.H.P.; Liang, D.W.; Zhang, T.; Liu, Y. Anaerobic Treatment of Phenol in Wastewater under Thermophilic Condition. Water Res. 2006, 40, 427–434. [Google Scholar] [CrossRef] [PubMed]
Energies 16 00949 g001 550
Figure 1. Lignocellulosic biomass structure (modified from [45], published under CCBY 4.0 license).
Figure 1. Lignocellulosic biomass structure (modified from [45], published under CCBY 4.0 license).
Energies 16 00949 g001
Energies 16 00949 g002 550
Figure 2. The anaerobic digestion process.
Figure 2. The anaerobic digestion process.
Energies 16 00949 g002
Energies 16 00949 g003 550
Figure 3. Photo-fermentation and dark fermentation processes (reproduced from [57], published under CCBY 4.0 license).
Figure 3. Photo-fermentation and dark fermentation processes (reproduced from [57], published under CCBY 4.0 license).
Energies 16 00949 g003
Energies 16 00949 g004 550
Figure 4. Metabolic pathways of Enterobacter spp. (a) and Clostridium spp. (b) in dark fermentation. ATP: adenosine triphosphate; NAD(H): nicotinamide adenine dinucleotide; ldhA: lactate dehydrogenase; pfl: pyruvate formate lyase; fdh: formate dehydrogenase; mdh: malate dehydrogenase; adhE: aldehyde–alcohol dehydrogenase; ackA: acetate kinase; fum: fumarate; frd: fumarate reductase; FADH2: flavin adenine dinucleotide; Fd: ferredoxin; ADP: adenosine diphosphate.
Figure 4. Metabolic pathways of Enterobacter spp. (a) and Clostridium spp. (b) in dark fermentation. ATP: adenosine triphosphate; NAD(H): nicotinamide adenine dinucleotide; ldhA: lactate dehydrogenase; pfl: pyruvate formate lyase; fdh: formate dehydrogenase; mdh: malate dehydrogenase; adhE: aldehyde–alcohol dehydrogenase; ackA: acetate kinase; fum: fumarate; frd: fumarate reductase; FADH2: flavin adenine dinucleotide; Fd: ferredoxin; ADP: adenosine diphosphate.
Energies 16 00949 g004
Energies 16 00949 g005 550
Figure 5. Dark fermentation integrated within the anaerobic digestion process.
Figure 5. Dark fermentation integrated within the anaerobic digestion process.
Energies 16 00949 g005
Energies 16 00949 g006 550
Figure 6. Pre-treatment effect on the lignocellulose structure.
Figure 6. Pre-treatment effect on the lignocellulose structure.
Energies 16 00949 g006
Energies 16 00949 g007 550
Figure 7. Biochemical activity of laccase (a), lignin peroxidase (b), and manganese peroxidase (c) (reproduced from [45], published under CCBY 4.0 license).
Figure 7. Biochemical activity of laccase (a), lignin peroxidase (b), and manganese peroxidase (c) (reproduced from [45], published under CCBY 4.0 license).
Energies 16 00949 g007
Energies 16 00949 g008 550
Figure 8. Enzymatic hydrolysis mechanism on cellulose (a) and hemicellulose (b) (reproduced from [45], published under CCBY 4.0 license).
Figure 8. Enzymatic hydrolysis mechanism on cellulose (a) and hemicellulose (b) (reproduced from [45], published under CCBY 4.0 license).
Energies 16 00949 g008
Table
Table 1. Fiber composition of giant reed biomass.
Table 1. Fiber composition of giant reed biomass.
Harvesting TimeCountryCellulose (%TS)Hemicellulose (%TS)Lignin (%TS)References
n.a.China33.730.110.1[27]
January 2017Italy43.123.611.4 a[28]
January 2017Italy39.123.111.7 a[29]
January 2017Italy41.222.510.9 a[30]
February 2021Italy36.929.010.4 a[31]
March 2006Italy33.428.914.0 a[32]
July 2016Italy46.523.312.3 a[33]
September 2016Italy40.922.910.9 a[24]
September2020Italy35.929.19.6 a[31]
October 2010Italy32.923.325.9 b[34]
October 2010Italy32.120.522.9 b[35]
October 2017Italy39.525.410.2 a[24]
October 2018Italy43.523.310.4 a[24]
n.a.Portugal33.920.324[36]
n.a.Thailand39.124.419.2 b[37]
August 2016USA34.917.420.1 b[38]
August 2016USA31.016.116.0 b[39]
October 2014USA27.715.616.7 b[40]
October 2014USA29.015.416.4 b[41]
November 2015USA32.513.923.9 b[42]
November 2016USA28.814.416.9 b[39]
December 2014USA41.520.518.4 b[40]
December 2016USA30.315.317.8 b[39]
TS: total solids; n.a.: not available; a van Soest method [43]; b National Renewable Energy Laboratory method (NREL) [44].
Table
Table 2. Effects of different pre-treatments of giant reed biomass on methane yield in batch systems.
Table 2. Effects of different pre-treatments of giant reed biomass on methane yield in batch systems.
Type of Pre-TreatmentPre-Treatment Agents and ConditionsDigestion
Temperature (°C)		Methane Yield
(mL CH4 g−1 VS)		Maximum Methane
Increase a		References
MechanicalTwo stage milling38213137%[33]
HydrothermalSteam cooking (150–180 °C, 10–20 min)5333723%[34]
HydrothermalLiquid hot water (170–230 °C, 5–15 min)3728431%[42]
HydrothermalAutoclaving (121 °C, 20 min)351983%[28]
ChemicalNaOH (0.05–0.15 N), 25 °C, 24 h3524321%[35]
ChemicalNaOH (1–20 g L−1), 25 °C, 24 h3735463%[42]
ChemicalNaOH (20 g L−1), 25 °C, 24 h3735361%[38]
ChemicalCa(OH)2 (1–20% g−1 TS), 25 °C, 24 h 3728534%[38]
ChemicalKOH (13.5% g−1 VS), 121 °C, 20 min3523221%[28]
ChemicalH2SO4 (2% w/w), 150–180 °C, 10–20 min53n.a.−49%[34]
BiologicalEnsilage, 25 °C, 90 d3717318%[40]
BiologicalEnsilage, 25 °C, 60 d3718814%[39]
BiologicalCeriporiopsis subvermisporab, 28 °C, 30 d37153−7.6%[39]
BiologicalIrpex lacteusb, 26 °C, 30 d3877−27%[31]
BiologicalPleurotus ostreatusb, 26 °C, 30 d3813134%[31]
a Compared with the untreated control; b fungal agent.
Table
Table 3. Hydrogen production from giant reed biomass after hybrid or enzymatic pre-treatment.
Table 3. Hydrogen production from giant reed biomass after hybrid or enzymatic pre-treatment.
Pre-Treatment Method1st Pre-TreatmentEnzymatic Pre-TreatmentFermentation SystemTemperature
(°C)		H2 Yield
(mL g−1 VS)		References
Hybrid (SE + Enz.)Steam explosion, 210 °C, 6 minCellulase 15 FPU g−1, cellobiase 30 U g−1, 50 °C, 72 hDF3543[83]
Hybrid (SE + Enz.)Steam explosion, 210 °C, 6 minCellulase 15 FPU g−1, cellobiase 30 U g−1, 50 °C, 72 hDF38161[84]
Hybrid (SE + Enz.)Steam explosion, 210 °C, 6 minCellulase 15 FPU g−1, cellobiase 30 U g−1, 50 °C, 72 hDF38307[85]
Hybrid (alkali + Enz.)NaOH, 1–20 g L−1 24 °C, 24 hCellic CTec2 20 FPU g−1
d.a.r.		PF30101 a[41]
Hybrid (alkali + Enz.)Ca(OH)2, 1–20 g L−1 24 °C, 24 hCellic CTec2 20 FPU g−1
d.a.r.		PF3080 a[41]
Hybrid (alkali + Enz.)NaOH, 12 g L−1 121 °C, 20 minCellic CTec2 25 FPU g−1
50 °C, 144 h		DF35237[29]
Hybrid (ILs + Enz.)[Bmim]BF4, 2–16 g L−1, 80 °C, 3 hCellic CTec2 20 FPU g−1
d.a.r.		PF3097 a[102]
Hybrid (ILs + Enz.)[Bmim]HSO4, 2–16 g L−1, 80 °C, 3 hCellic CTec2 20 FPU g−1
d.a.r.		PF30108 a[102]
Hybrid (ILs + Enz.)[Amim]Cl, 2–16 g L−1, 80 °C, 3 hCellic CTec2 20 FPU g−1
d.a.r.		PF30100 a[102]
Hybrid (ILs + Enz.)[Bmim]acetate, 6 g L−1, 70 °C, 4 hCellulase 20 FPU g−1
d.a.r.		PF3069 a[103]
Enzymaticn.a.Cellic CTec2 20 FPU g−1
d.a.r.		PF3082 a[102]
Enzymaticn.a.Cellic CTec2 20 FPU g−1
d.a.r.		PF3059 a[41]
Enzymaticn.a.Cellulase 20 FPU g−1
d.a.r.		PF3081 a[121]
Enzymaticn.a.Cellulase 20 FPU g−1
d.a.r.		PF30126 a[122]
Enzymaticn.a.Cellulase 20 FPU g−1
d.a.r.		PF3046 a[103]
Enzymaticn.a.Cellulase 15 FPU g−1, cellobiase 30 U g−1, 50 °C, 72 hDF38189[84]
Enzymaticn.a.Cellulase 15 FPU g−1, cellobiase 30 U g−1, 50 °C, 72 hDF38363[85]
a Calculated; DF: dark fermentation; PF: photo-fermentation; d.a.r.: direct addition of the enzymes in the fermentation reactor; Enz.: enzymatic; SE: steam explosion; ILs: ionic liquids; n.a.: not applicable.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Vasmara, C.; Galletti, S.; Cianchetta, S.; Ceotto, E. Advancements in Giant Reed (Arundo donax L.) Biomass Pre-Treatments for Biogas Production: A Review. Energies 2023, 16, 949. https://0-doi-org.brum.beds.ac.uk/10.3390/en16020949

AMA Style

Vasmara C, Galletti S, Cianchetta S, Ceotto E. Advancements in Giant Reed (Arundo donax L.) Biomass Pre-Treatments for Biogas Production: A Review. Energies. 2023; 16(2):949. https://0-doi-org.brum.beds.ac.uk/10.3390/en16020949

Chicago/Turabian Style

Vasmara, Ciro, Stefania Galletti, Stefano Cianchetta, and Enrico Ceotto. 2023. "Advancements in Giant Reed (Arundo donax L.) Biomass Pre-Treatments for Biogas Production: A Review" Energies 16, no. 2: 949. https://0-doi-org.brum.beds.ac.uk/10.3390/en16020949

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop