Fatigue Behavior and Crack Mechanism of Metals and Alloys
Department of Chemical Engineering, Materials and Environment, Sapienza University of Rome, 00184 Rome, Italy
Metals 2023, 13(5), 899; https://0-doi-org.brum.beds.ac.uk/10.3390/met13050899
Submission received: 19 April 2023
/
Accepted: 19 April 2023
/
Published: 6 May 2023
(This article belongs to the Special Issue Fatigue Behavior and Crack Mechanism of Metals and Alloys)
Fatigue is one of the most critical problems in structural design, and this is true at different scale levels. The present Special Issue, Fatigue Behavior and Crack Mechanism of Metals and Alloys, aims to highlight this important topic, showing recent trends and developments. The Special Issue is dedicated to traditional and innovative materials, and the aim is to provide a full overview of the recent topics mentioned above. The SI contains 12 papers touching on different computational and experimental aspects [1,2,3,4,5,6,7,8,9,10,11,12].
The Guest Editor wants to thank all the authors and reviewers who dedicate time to this Special Issue.
Conflicts of Interest
The author declares no conflict of interest.
References
- Qian, D.; Ma, C.; Wang, F. The Effect of Flow Lines on the Mechanical Properties in Hot-Rolled Bearing Steel. Metals 2021, 11, 456. [Google Scholar] [CrossRef]
- Tsuchiya, S.; Takahashi, K. Improving Fatigue Limit and Rendering Defects Harmless through Laser Peening in Additive-Manufactured Maraging Steel. Metals 2022, 12, 49. [Google Scholar] [CrossRef]
- Ngeru, T.; Kurtulan, D.; Karkar, A.; Hanke, S. Mechanical Behaviour and Failure Mode of High Interstitially Alloyed Austenite under Combined Compression and Cyclic Torsion. Metals 2022, 12, 157. [Google Scholar] [CrossRef]
- Choi, J.; Choi, J.; Lee, K.; Hur, N.; Kim, N. Fatigue Life Prediction Methodology of Hot Work Tool Steel Dies for High-Pressure Die Casting Based on Thermal Stress Analysis. Metals 2022, 12, 1744. [Google Scholar] [CrossRef]
- Dharmadhikari, S.; Raut, R.; Bhattacharya, C.; Ray, A.; Basak, A. Assessment of Transfer Learning Capabilities for Fatigue Damage Classification and Detection in Aluminum Specimens with Different Notch Geometries. Metals 2022, 12, 1849. [Google Scholar] [CrossRef]
- Salahshouri, F.; Saebnoori, E.; Borghei, S.; Mossahebi-Mohammadi, M.; Bakhsheshi-Rad, H.; Berto, F. Plasma Electrolytic Oxidation (PEO) Coating on γ-TiAl Alloy: Investigation of Bioactivity and Corrosion Behavior in Simulated Body Fluid. Metals 2022, 12, 1866. [Google Scholar] [CrossRef]
- Ronchei, C. Fatigue Strength Estimation of Ductile Cast Irons Containing Solidification Defects. Metals 2023, 13, 83. [Google Scholar] [CrossRef]
- Narkevich, N.; Vlasov, I.; Volochaev, M.; Gomorova, Y.; Mironov, Y.; Panin, S.; Berto, F.; Maksimov, P.; Deryugin, E. Low-Temperature Deformation and Fracture of Cr-Mn-N Stainless Steel: Tensile and Impact Bending Tests. Metals 2023, 13, 95. [Google Scholar] [CrossRef]
- Romanova, V.; Emelianova, E.; Pisarev, M.; Zinovieva, O.; Balokhonov, R. Quantification of Mesoscale Deformation-Induced Surface Roughness in α-Titanium. Metals 2023, 13, 440. [Google Scholar] [CrossRef]
- Gatina, S.; Polyakova, V.; Modina, I.; Semenova, I. Fatigue Behavior and Fracture Features of Ti-15Mo Alloy in β-, (α + β)-, and Ultrafine-Grained Two-Phase States. Metals 2023, 13, 580. [Google Scholar] [CrossRef]
- Scorza, D. Fatigue Life Assessment of Metals under Multiaxial Asynchronous Loading by Means of the Refined Equivalent Deformation Criterion. Metals 2023, 13, 636. [Google Scholar] [CrossRef]
- Balokhonov, R.; Zemlianov, A.; Gatiyatullina, D.; Romanova, V. Computational Analysis of the Influence of Residual Stress on the Strength of Composites with Different Aluminum Matrices and Carbide Particles. Metals 2023, 13, 724. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
MDPI and ACS Style
Berto, F. Fatigue Behavior and Crack Mechanism of Metals and Alloys. Metals 2023, 13, 899. https://0-doi-org.brum.beds.ac.uk/10.3390/met13050899
AMA Style
Berto F. Fatigue Behavior and Crack Mechanism of Metals and Alloys. Metals. 2023; 13(5):899. https://0-doi-org.brum.beds.ac.uk/10.3390/met13050899
Chicago/Turabian StyleBerto, Filippo. 2023. "Fatigue Behavior and Crack Mechanism of Metals and Alloys" Metals 13, no. 5: 899. https://0-doi-org.brum.beds.ac.uk/10.3390/met13050899
Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.
