Next Article in Journal
Microalgae Biomass as a Potential Feedstock for the Carboxylate Platform
Next Article in Special Issue
Heparinoid Complex-Based Heparin-Binding Cytokines and Cell Delivery Carriers
Previous Article in Journal
Radiation Induced One-Electron Oxidation of 2-Thiouracil in Aqueous Solutions
Previous Article in Special Issue
Crude Heparin Preparations Unveil the Presence of Structurally Diverse Oversulfated Contaminants
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Molecules
Volume 24
Issue 23
10.3390/molecules24234403
molecules-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Heparanase as an Additional Tool for Detecting Structural Peculiarities of Heparin Oligosaccharides

by
Anna Alekseeva
1,*,†,
Elena Urso
2,*,†,
Giulia Mazzini
1,‡ and
Annamaria Naggi
1,2
1
Centro Alta Tecnologia Istituto di Ricerche Chimiche e Biochimiche G. Ronzoni Srl, via G. Colombo 81, 20133 Milan, Italy
2
Istituto di Ricerche Chimiche e Biochimiche G. Ronzoni, via G. Colombo 81, 20133 Milan, Italy
*
Authors to whom correspondence should be addressed.
†
Authors contributed equally to this work.
‡
Present address: IRCCS Policlinico San Matteo, viale Golgi 19, 27100 Pavia, Italy; [email protected] (G.M.)
Molecules 2019, 24(23), 4403; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules24234403
Submission received: 13 November 2019 / Revised: 29 November 2019 / Accepted: 30 November 2019 / Published: 2 December 2019
(This article belongs to the Special Issue Emerging Frontiers in Glycosaminoglycans and Mimetics)
Browse Figures
Versions Notes

Abstract

:
Due to the biological properties of heparin and low-molecular-weight heparin (LMWH), continuous advances in elucidation of their microheterogeneous structure and discovery of novel structural peculiarities are crucial. Effective strategies for monitoring manufacturing processes and assessment of more restrictive specifications, as imposed by the current regulatory agencies, need to be developed. Hereby, we apply an efficient heparanase-based strategy to assert the structure of two major isomeric octasaccharides of dalteparin and investigate the tetrasaccharides arising from antithrombin binding region (ATBR) of bovine mucosal heparin. Heparanase, especially when combined with other sample preparation methods (e.g., size exclusion, affinity chromatography, heparinase depolymerization), was shown to be a powerful tool providing relevant information about heparin structural peculiarities. The applied approach provided direct evidence that oligomers bearing glucuronic acid–glucosamine-3-O-sulfate at their nonreducing end represent an important structural signature of dalteparin. When extended to ATBR-related tetramers of bovine heparin, the heparanase-based approach allowed for elucidation of the structure of minor sequences that have not been reported yet. The obtained results are of high importance in the view of the growing interest of regulatory agencies and manufacturers in the development of low-molecular-weight heparin generics as well as bovine heparin as alternative source.

1. Introduction

Heparin is a widely used anticoagulant and antithrombotic drug which structurally represents a highly sulfated linear polydisperse glucosaminoglycan (GAG) that primarily consists of a repeating 2-O-sulfated iduronic acid (I2S) and glucosamine-N,6-O-disulfate (ANS6S). Heparin structural complexity is further increased by the presence of glucuronic acid (G) and N-acetyl-glucosamine (ANAc) as well as other minor structures, such as 2-O-sulfated glucuronic acid (G2S), linkage region (LR), 3-O-sulfated glucosamine-N-sulfate (ANS3S(6S)) [1,2,3]. The latter, when preceded by G, is a marker of antithrombin binding region (ATBR) (ANX6S–G–ANS3S6S–I2S–ANS6S; X = Ac or SO3) essential for high anticoagulant and antithrombotic activity of heparin [4,5,6]. While the presence of the –G–ANS3S6S– fragment is mandatory for the binding, the sulfation/acetylation pattern of the other residues can vary [6,7]. In the case of enzymatically or chemically generated low-molecular-weight heparins (LMWHs), unnatural residues at reducing (RE) and nonreducing end (NRE) introduce additional features in its complex structure [2,8,9].
The variety of biological properties of heparin/LMWH is strongly related to its high sulfation degree and structural microheterogeneity, determining binding with numerous proteins and other biomolecules. From the other side, their structural complexity together with high molecular weight significantly complicate their analysis. In fact, heparin/LMWH structural elucidation cannot be performed using a single method but requires the combination of different orthogonal methods, in particularly high-resolution NMR and mass spectrometry (MS) [7,10,11,12]. Particularly, high-resolution MS allowed the achievement of previously unthinkable sensitivity and specificity in identification of heparin-related oligosaccharides and their building blocks [11,12,13,14,15,16]. To overcome the problem of high molecular weight and microheterogeneity, enzymatic degradation with heparinases followed by a refined LC-MS analysis is often involved in the structural characterization scheme [10,17,18,19,20]. It has been extensively reported that heparinases I and III show high specificity by cleavage of highly sulfated and undersulfated regions, respectively, while heparinase II displays a broad range of substrate specificity [17,18,19]. Particularly, heparinase I cleaves the linkage ANS3X6X–I2S (X = H or SO3), heparinase III cleaves ANAc6X–I and ANS6X–G (X = H or SO3), while heparinase II essentially cleaves glycosidic linkages containing both 2-O-sulfated and nonsulfated uronic acids. Nowadays, the use of heparinases is recognized to be a valuable method to obtain patterns characteristic for different animal sources, to determine minor unusual sequences or contaminating species, and to compare different heparin/LMWH batches for sameness studies [21]. However, despite relevant structural information it can provide about heparin composition, heparinase depolymerization is often not sufficient to elucidate specific sequences that are resistant to these enzymes. Particularly, none of them can cleave the A–G linkage when followed by ANS3S(6S) within ATBR [7,10]. The resistance of tetrasaccharides arising from the ATBR to heparinases, together with the absence of their standards, does not allow determination of their sequences and consequent description of the composition of ATBR variants within heparin samples without time-consuming isolation steps.
In this work we propose a combined approach that implicates the use of heparanase as heparin degrading enzyme prior to LC-MS analysis, when heparinase digestion did not provide sufficient structural information about heparin sequences. Heparanase is a β-d-endoglucuronidase [22,23] confined inside specific cells under the normal conditions but found in the circulation of patients with most oncological or inflammation diseases [24,25]. Extracellular heparanase is thought to be a critical player in tumor growth and progression, since it may alter the integrity of extracellular matrix through the release of growth factors from heparan sulfate (HS) storage sites. It acts through hydrolytic action of the linkage between the anomeric position of G and the following residue, while its specificity is dependent on the substrate size and sulfation pattern with the preference for the longer sulfated chains [26,27,28]. Interestingly, the presence of an ANS3S(6S) at the RE of the site of substrate cleavage exhibits a promoting effect in relatively lowly sulfated sequences but inhibits the cleavage of highly sulfated structures [26]. On the other hand, ATBR-related sequence of synthetic pentasaccharide ANS6S–G–ANS3S6S–I2S–ANS6SOMe (Fondaparinux®) was shown to be susceptible to heparanase by Bisio et al. [29]. This susceptibility was used for the development of a sensitive LC-MS approach for measuring heparanase activity by using the synthetic pentasaccharide as a substrate. Mao et al. [28] used heparanase depolymerization prior to a limited digestion by heparinase III to generate odd-numbered HS oligosaccharides to further explore the corresponding heparanase cleavage sites and enzyme substrate specificity. In spite of the mentioned studies, heparanase enzymatic properties have not been exploited yet for the in-depth structural characterization of heparin oligosaccharides.
In the present study we exploited heparanase specificity towards G–ANS3S(6S)-containing sequences in order to show its potential application for structural elucidation of particular heparin-related oligosaccharide sequences. Here, we report two particular examples of its implication for heparin structural analysis. Firstly, heparanase was used to assert the structure of two major components of a dalteparin octasaccharide fraction, previously only tentatively assigned to I2S–ANS6S–I2S–ANS6S–I2S–ANS6S–I2S–aM.ol6S and G–ANS3S6S–I2S–ANS6S–I2S–ANS6S–I2S–aM.ol6S (where aM.ol is a 2,5-anhydromannitol) [12]. The variety of terminal residues of LMWHs represents one of the important structural signatures of these drugs. The presence of G–ANS3S6S– moieties at the NRE of dalteparin oligomers would provide additional information on the depolymerization process.
Secondly, the heparanase-based strategy was extended to the structural elucidation of tetrasaccharides of bovine mucosal heparin (BMH) resistant to heparinases. Structural analysis of bovine-derived heparin is of particular interest because of the attempt of its reintroduction to the US market in order to diversify heparin sources and guarantee its supply [30].
Several strategies using heparinases are currently employed to characterize disaccharide building blocks of heparins. In the present study we show that the use of heparanase can add value to the traditional heparinase-based strategy. When applied to a BMH fraction with high affinity towards antithrombin (HA fraction), it allowed the identification of some new ATBR-related tetrasaccharides in addition to the already reported structures [7,10,16,31,32,33]. Their structure and distribution reflect the structural heterogeneity of ATBR sequences strongly associated with heparin biological activity.
Notably, the results reported hereafter provide some new insights about heparanase substrate specificity.

2. Results and Discussion

2.1. Identification of G–ANS3S6S Sequence at the NRE of Dalteparin Octasaccharides

As mentioned above, our previous studies [12] suggest that some major components of dalteparin bear a G–ANS3S6S unit at their NRE. This was also consistent with the recently published study showing the presence of at least two U8,11,0–aM.ol isomers [34] as well as our previously work on glycol-split LMWHs, where the presence of nonsulfated uronic acids at the NRE of fully sulfated oligomers was hypothesized [35]. Notably, this phenomenon was observed for each size fraction, making these isomers characteristic structural features of dalteparin and sensitive markers of depolymerization process conditions.
We initially attempted to isolate U8,11,0–aM.ol isomers by ion pair reversed-phase (IPRP) chromatography for their detailed NMR study. Despite IPRP UHPLC separation mode having been previously shown to provide a good resolution between these isomers [12], the method transfer to a preparative HPLC scale caused a dramatic decrease in their separation. Moreover, their isolation was complicated by difficulties associated with signal monitoring due to low UV absorbance of saturated oligosaccharides. Alternatively, the combination of enzymatic methods, the UHPLC separation mode and the introduction of the on-line collision ion dissociation (CID) MS/MS analysis did provide some relevant data for the elucidation of the isomeric structures.
The LC-MS analysis did show that the two main components of octasaccharide fraction are the isomeric undecasulfated octasaccharides U8,11,0–aM.ol bearing aM.ol at the RE (Figure 1). The fragment distribution arising from the action of heparinases I, II and III on dalteparin octasaccharide fraction (Figure 2) was consistent with the hypothesis of the structure of two isomeric octasaccharides I2S–ANS6S–I2S–ANS6S–I2S–ANS6S–I2S–aM.ol6S and G–ANS3S6S–I2S–ANS6S–I2S–ANS6S–I2S–aM.ol6S. Among the major components, the exhaustive heparinase digestion generated an unsaturated tetrasaccharide ΔU4,5,0–aM.ol (–I2S–ANS6S–I2S–aM.ol6S) resistant to heparinase due to the presence of unnatural RE [36] as well as unsaturated disaccharide ΔU2,3,0, arising from the internal –I2S–ANS6S– sequences accompanied by two saturated disaccharides U2,3,0 with three sulfate groups, whose formation was consistent with the presence of I2S–ANS6S– and G–ANS3S6S– at the NRE of the two octamers. Notably, the absence of tetrasulfated disaccharides, with neither saturated U2,4,0 nor unsaturated ΔU2,4,0 [7,10] found in heparinase digest (Figure 2), suggests that trisulfated glucosamine is preceded by a nonsulfated uronic acid, but not an I2S residue.
Since an efficient sugar ring fragmentation cannot retain the labile sulfate groups, the MS/MS fragmentation in CID mode precludes the exact structure identification. At any rate, the MS/MS experiments of these disaccharides produced some useful fragments arising from intra-ring cleavages A, B, X, Y and Z [37,38]. The fragment 0,2X2 appears more intense in the first isomer than the second one, while the ion 0,2A2 at m/z 198.99 was detected only in the MS/MS spectrum of the first isomer. This observation, in agreement with the known behavior that the 0,2A ion fragments are favored by a more sulfated glucosamine [39], suggests that the first isomer U2,3,0 corresponds to a nonsulfated uronic acid U followed by ANS3S6S unit. In addition, the ion B1 – CO2 (+1 SO3) at m/z 210.99 arising from the 2-O-sulfated uronic acid and detected only in the fragmentation spectrum of the second isomer, confirmed the presence of the I2S–ANS6S– fragment at the NRE disaccharide within the corresponding octamer (Table 1).
The structural detail that allowed to complete the identification of the structure G–ANS3S6S–I2S–ANS6S–I2S–ANS6S–I2S–aM.ol6S emerged after the enzymatic cleavage of dalteparin octasaccharide fraction with heparanase. The LC-MS analysis of the octasaccharide fraction before and after heparanase treatment showed the simultaneous resistance of the isomer U8,11,0–aM.ol eluted at RT 21.1 min (m/z 914.838 of [M – 3H + 4DBA]3– ion form) and the disappearance of the isomer eluted at RT 22.2 min (m/z 914.838 of [M – 3H + 4DBA]3– ion form) and, importantly, the appearance of a new peak at RT 19.9 min with the m/z 856.160 attributed to a [M – 3H + 4DBA]3– ion of heptasaccharide A7,11,0–aM.ol (Figure 3). Relying on the known specificity of heparanase towards G–ANS linkages [27], the formation of a heptasaccharide with a glucosamine at the NRE and the same sulfation degree as the U8,11,0–aM.ol directly indicates that this heptamer is a heparanase-generated depolymerization product and the isomer, susceptible to heparanase, contained a nonsulfated G at its NRE. An increase of monosaccharide ANS3S6S peak, observed after further digestion with heparinases (Figure S1), proved that this glucosamine is at the NRE end of the heparanase-generated heptamer.
The obtained data provide the evidence that heparanase can cleave even a single monosaccharide from the NRE, opening new questions about the heparanase mechanism of action. Despite being in accord with its mechanism of action consisting in the hydrolytic cleavage from the NRE [27,40], monosaccharide release by an endo-enzyme was quite unexpected. To our knowledge, monosaccharide digestion product has not been reported yet.
Together with the prevalent U8,11,0–aM.ol isomers, their minor isomers eluted between 22.5 and 24 min are believed to bear G–ANS3S6S moiety within their chains accordingly to Bisio et al.: I2S–ANS6S–G–ANS3S6S–I2S–ANS6S–I2S–aM.ol6S and I2S–ANS6S–I2S–ANS6S–G–ANS3S6S–I2S–aM.ol6S [12]. Heparanase only partially hydrolyzed these isomers, however, the appearance of tri- and pentasaccharide pairs (U3,3,0/A5,8,0–aM.ol and U5,6,0/A3,5,0–aM.ol, respectively, Figure 3) is in accordance with the proposed structures (Figure 3).
It is worth also noting that the use of heparanase generated additional information about heterogeneity level of heparins. Even if it may be complicated to unambiguously determine the digestion products of each oligomer when it comes to minor components, the heparanase-generated LC-MS profiles may represent characteristic fingerprints for these complex drugs.
Even more interestingly, it is worth discussing the possible formation of oligomers bearing G–ANS3S6S at their NRE. Their relatively high abundance and above-mentioned presence in all the size fractions of commercial dalteparin samples analyzed in our laboratory make them an important structural signature of this LMWH. It is well established that the nitrous acid depolymerization used in dalteparin production occurs at the level of N-sulfated glucosamine and an uronic acid, where N-sulfation represents mandatory structural factor [41]. Thus, the isomers containing G–ANS3S6S at the NRE detected in dalteparin arise from the depolymerization of the N-sulfated variant of ATBR (–ANS6S–G–ANS3S6S–I2S–ANS6S–), but not its N-acetylated variant (–ANAc6S–G–ANS3S6S–I2S–ANS6S–), predominant in porcine mucosa heparin.

2.2. Structural Elucidation of Heparin G–ANS3S6S Containing Oligomers Resistant to Heparinase Action

Furthermore, the effectiveness of the heparanase-based strategy was extended to the structural elucidation of tetrasaccharides of bovine heparin, resistant to exhaustive digestion by heparinases and, consequently, associated with the presence of G–ANS3S(6S) fragment at the RE [7,10,31,32,33]. To specifically explore the species containing the ATBR, the HA fraction of a BMH, enriched in these sequences by affinity chromatography fractionation, was investigated. A multistep salt gradient was applied as described in Section 3 and a fraction, eluted with 3M sodium chloride and expected to possess the highest affinity to AT, was further studied.
LC-MS analysis of these oligomers, subjected to exhaustive heparinases digestion (Figure S2a) showed, as expected, that the main digestion product is represented by the trisulfated disaccharide ΔU2S–ANS6S and the less intense disulfated ones (ΔU–ANS6S and ΔU2S–ANS) reflecting the regular I2S–ANS6S, I/G–ANS6S and I2S–ANS sequences, respectively. Monosulfated and monoacetylated disaccharides were detected as minor components in addition to a few linkage region fragments: the intact linkage region (LR: ΔU–Gal–Gal–Xyl–Ser), its acetylated form (LR-Ac: ΔU–Gal–Gal–Xyl–Ser–COCH3) and the oxidated form (LR-ox: ΔU–Gal–Gal–Xyl–CH2COOH). It can be noted that, even if the serine acetylation has already been observed by Chen et al. in a porcine sample [16], we have found this fragment only in the bovine ones (unpublished data).
More interestingly, the oligosaccharides region showed several species that are resistant to exhaustive heparinase cleavage (Figure S3a). Among those, the major tetrasaccharides generated from the AT-binding site (ΔU4,3,1 (ΔU–ANAc6S–G–ANS3S); ΔU4,4,1 (ΔU–ANAc6S–G–ANS3S6S); ΔU4,5,0 (1) (ΔU–ANS6S–G–ANS3S6S); ΔU4,5,0 (2) (ΔU2S–ANS–G–ANS3S6S) and ΔU4,6,0 (ΔU2S–ANS6S–G–ANS3S6S)) have been previously reported [7]. The third detected isomer, ΔU4,5,0 (3), was also observed in bovine heparin in the previously published work, however, its structure has not been assigned.
Notably, we found other minor tetrasaccharides attributed to ΔU4,4,0 and an additional isomer of ΔU4,4,1 (eluted between 33.5 and 35 min) as well as ΔU4,5,1 (eluted at about 37.5 min), whose generation and structure have not been reported previously. More unexpectedly, very lowly abundant hexasaccharides with m/z 913.6 (z = −2) and m/z 999.2 (z = −2), attributed to ΔU6,7,0 (unsaturated hexasaccharide with seven sulfate groups) and ΔU6,7,1 (unsaturated hexasaccharide with seven sulfate groups and one acetyl group), respectively, were detected (Figure 5a and Figure S3). The presence of three positional isomers of ΔU6,7,0 was exclusively observed in HA bovine heparin, while only a heparinase-resistant ΔU6,6,1 hexamer has been previously found in HA porcine heparin fraction [7]. These findings are both in agreement with higher abundance of N-acetylated ATBR variant in porcine heparin.
To record new structural information about the heparinase-resistant tetra- and hexasaccharides, an attempt was performed by using the new strategy consisting of the heparanase addition to previous heparinase digest. Addition of heparanase did cause a significant change in LC-MS profile, especially, in its oligosaccharide region (Figure 4a,b). Interestingly, some of the heparinase-resistant oligomers appeared resistant to heparanase, while some of them totally disappeared from chromatogram, suggesting the presence of structural differences around the G–ANS3S6S linkage that were associated with different sulfation patterns.
Examining the major tetrasaccharides, ΔU4,3,1 (ΔU–ANAc6S–G–ANS3S) resulted as the most resistant to heparanase action, while ΔU4,4,1 (ΔU–ANAc6S–G–ANS3S6S) and the first isomer of ΔU4,5,0 (ΔU–ANS6S–G–ANS3S6S) seem to totally disappear. These tetrasaccharides share a very similar sequence around the glucuronic acid, therefore the unexpected resistance of one of them is supposed to be related to small structural differences among their structures. The tetrasaccharide ΔU4,6,0 (ΔU2S–ANS6S–G–ANS3S6S) showed a significant susceptibility toward the heparanase although it has not completely digested, in agreement with some heparanase resistance (as mentioned above) displayed by the –G–ANS3S6S– intrachain sequence of minor U8,11,0–aM.ol isomers detected in dalteparin. The partial resistance of this tetrasaccharide can be explained by the inhibitory effect in a highly sulfated sequence, as mentioned in the introduction [26], while the others are believed to be resistant because of low sulfation around the cleavage site.
It can be noticed that the resistant ΔU4,3,1 (ΔU–ANAc6S–G–ANS3S) shows the presence of ANS3S in place of ANS3S6S located at the RE of ΔU4,4,1 (ΔU–ANAc6S–G–ANS3S6S) which, in contrast, resulted as extensively digested.
In view of this observation, the revealed resistance of ΔU4,3,1 can be attributed to the lack of 6-O-sulfation at the RE, in accordance with previously published studies [26,27], and allows to explain the presence of the unknown ΔU4,4,1 (2) and ΔU4,5,0 (3) isomers (eluting at ~34.5 and ~38 min, respectively; Figure 4b) whose heparanase resistance is believed to be associated with the lack of 6-O-sulfation at the RE within the following structures ΔU2S–ANAc6S–G–ANS3S and ΔU2S–ANS6S–G–ANS3S. Based on the same considerations, both the two unknown isomers of ΔU4,4,0 shown to be little susceptible to heparanase, were assigned to ΔU(2X)–ANS(6X)–G–ANS3S (X = OH or SO3).
Furthermore, the resistance toward heparanase exhibited by the tetrasaccharide ΔU4,5,0 (2) (ΔU2S–ANS–G–ANS3S6S), whose structure was previously reported [7], suggests that the lack of 6-O-sulfation on the glucosamine preceding the G–ANS3S6S linkage can also affect the active site recognition.
Among the new fragments arising from the hydrolytic cleavage of the G–A bond (Figure 4b and Figure S3), odd and even species were detected (Figure S3): unsaturated odd species in whose structures the reducing end G arises from the NRE of the G–A linkage (e.g., the unsaturated trisaccharides ΔU3,1,1; ΔU3,2,0; ΔU3,3,0) and saturated hexosamine residues (e.g., A1,3,0) from the RE of the G–A linkage.
Based on the peculiar heparanase specificity [26] and taking into account both the resistance of a few tetrasaccharides and the generation of specific enzymatic fragments, further interesting insights have emerged, as reported in Table 2. Particularly, apart from the previously identified tetrasaccharides, a structure was proposed for each of the species so far not identified. Specifically, the structures of tetrasaccharides showing some resistance to heparanase due to the lack of 6-O-sulfation at their RE (ΔU4,3,1, ΔU4,4,0 (1) and (2), ΔU4,4,1 (2) and ΔU4,5,0 (3), (Table 2)) appear to be supported by an extremely small amount of an ANS3S monomer.
The proposed elution order of the tetrasaccharides ΔU4,4,0 (1) and (2) (Table 2) is supported by previous evidence that the chromatographic separation is strictly related to the ionic interactions between the arrangement of sulfate groups along the oligomer chain and the alkylammonium ions contained in the eluent phases. Specifically, a better distribution of sulfate groups along the structure ΔU2S–ANS–G–ANS3S produces a lower steric hindrance than in the ΔU–ANS6S–G–ANS3S sequence. Consequently, the former will have a longer retention time than the latter by improving the interaction with the stationary phase of the chromatographic column.
Moreover, when applied to hexasaccharides observed in the heparinase-digested HA BMH fraction (ΔU6,7,0 and ΔU6,7,1), the heparanase-based approach may allow to explain their resistance to heparinases. The disappearance of all hexasaccharides after heparanase addition (Figure 5b) and the absence of signals corresponding to pentasaccharides species (monitored by extracted ion chromatograms of mass signals) seem to suggest the hypothesis of two vicinal cleavage sites within the hexasaccharide structures recognized by heparanase. This hypothesis was further supported by the detection of saturated disaccharides such as A2,2,0 and A2,3,0 (Figure S3) consistent with the sequences ANS3S–G and ANS3S6S–G, respectively, in agreement with the mechanism of action concerning the heparanase enzyme. At any rate, further investigation is needed to clarify their exact structures.

3. Materials and Methods

3.1. Materials and Reagents

Low-molecular weight heparin dalteparin was from injectable Fragmin® (Pfizer; lot Y08663). BMH was obtained from a commercial supplier (Kin Master, Vila Annes, Brazil). The synthetic pentasaccharide Arixtra® was from GlaxoSmithKline (London, UK). Heparinases I (EC 4.2.2.7), II and III (EC 4.2.2.8) were purchased from Grampian Enzymes (Aberdeen, Scotland, UK), while recombinant human heparanase, covalently linking the 8 and 50 kDa subunits to produce active single-chain heparanase molecules [42], was kindly provided by Israel Vlodavsky. All other reagents and chemicals were of HPLC grade or higher quality.

3.2. Isolation of Dalteparin Fraction by SEC-UV

Octasaccharide fraction was isolated from a commercial dalteparin sample using size-exclusion chromatography (SEC) as previously described [9,12]. Briefly, 300 mg sample dissolved in 5 mL of deionized water were loaded on two 5 cm × 90 cm in-series Biogel P6 columns and eluted with 0.25 M ammonium chloride at a flow rate of 1.8 mL/min, using UV detection at 210 nm. The pooled fraction was then desalted using TSK-gel HW40S Toyopearl (Tosoh Bioscience, Yamaguchi, Japan) column 2.6 cm × 60 cm, 10% ethanol at a flow rate of 1.4 mL/min as eluent, and UV detection at 210 nm.

3.3. Isolation of a Fraction with High Affinity towards AT(III) from Bovine Mucosal Heparin by Preparative Affinity Chromatography

A 50-mg portion of bovine mucosal heparin were dissolved in 5 mL of the initial eluent A (0.25 M NaCl, 50 mM CH3COONH4, pH 7.4–7.5) and loaded onto a 70 mL of AT-Sepharose (CNBr-ATIII SepharoseTM 4B) column (2.6 cm × 30 cm) kept at 4 °C and eluted at 2.5 mL/min using the following multistep gradient: 300 mL of eluent A, 390 mL of B (0.5 M NaCl, 50 mM CH3COONH4, pH 7.4–7.5), 300 mL of eluent C (1 M NaCl, 50 mM CH3COONH4, pH 7.4–7.5), 300 mL of eluent D (3 M NaCl, 50 mM CH3COONH4, pH 7.4–7.5). Each eluent was adjusted to pH 7.4–7.5 with 2 M NaOH. Carbazole reaction was used to monitor the elution profile, as described in [43]. The fraction eluted at 3 M NaCl was recovered from the eluent D and desalted as previously described [9].

3.4. Heparinases I, II and III Depolymerization

Exhaustive digestion with heparinases I, II and III was performed at 25 °C for 48 h in a total volume of 190 µL, including 20 µL of a 20 mg/mL sample solution in water, 100 µL heparinase I, II and III mixture (0.13 IU/mL of each heparinase in 10 mM monobasic potassium phosphate pH 7.0), and 70 µL of sodium/calcium acetate pH 7 solution (containing 2 mM of calcium acetate and 0.1 mg/mL bovine serum albumin (BSA)). At the end of the incubation time, sample solutions were heated at 100 °C for 2 min to inactivate the enzymes and filtered on a 0.22-µm filter prior to LC-MS analysis.

3.5. Heparanase Depolymerization

The heparanase enzymatic activity was tested using a commercially available Arixtra® solution according to the procedure previously described [29]. Dalteparin octasaccharide fraction was digested with heparanase following the same procedure as Arixtra®. The heparinases digest of the BMH HA fraction, prepared as specified above, was subjected to heparanase depolymerization using modified procedure including higher enzyme amount. At first, ~10 µg of the heparanase were added to ~268 µg of sample to have an enzyme/substrate ratio of ~1:27 w/w (128 µL of heparinases mixture digestion were mixed with 18 µL of a 550 µg/mL heparanase solution in MES buffer solution and 172 µL of 20 mM ammonium acetate containing 2 mM calcium acetate at pH 5.8, in a total volume of 318 µL) and left to stay under stirring for 24 h at 37 °C. Since several resistant tetrasaccharides were still observed, a further 18 µL aliquot of a 550 µg/mL heparanase solution (in MES buffer solution and 172 µL of 20 mM ammonium acetate containing 2 mM calcium acetate at pH 5.8) was added to 223 µL of previous digestion mixture to produce a final enzyme/substrate ratio of 1:11 w/w and the reaction was carried out under stirring at 37 °C for other 24 h.

3.6. LC-MS Analysis

LC-MS analyses were run on LC system (Platin Blue, Knauer, Berlin, Germany) coupled to ESI-Q-TOF mass spectrometer equipped with an electrospray interface and a high-resolution time-of-flight mass analyzer (Impact II, Bruker Daltonics, Bremen, Germany). Sample solutions (5 µL) were injected on C18 Kinetex column (100 mm × 2.1 mm i.d., with 2.6 µm particles, with precolumn filter, Phenomenex, Aschaffenburg, Germany) held at 35 °C. The mobile phases A (10 mM dibutylamine and 10 mM acetic acid in water) and B (10 mM dibutylamine and 10 mM acetic acid in methanol) were used for the gradient elution.
Dalteparin octasaccharides were separated at the flow rate of 0.3 mL/min applying a multistep gradient: the solvent composition was held at 20% B for the first 5 min, then increased to 53% B over 20 min, and to 70% B over another 1 min, where it was held for 5 min; finally, it was returned to 20% B over 1 min, and held for the last 20 min for equilibrating the chromatographic column. Heparinases digest of the octasaccharide fraction was eluted using the following elution gradient: the solvent composition was held at 10% B for the first 3 min, then increased to 60% B over 30 min, and to 85% B over another 4 min, where it was kept for 8 min and then returned to 10% B over 2 min, and held for other 13 min for column equilibrating. To perform MS/MS analysis, the latter gradient was adjusted for the only purpose of separating two isomeric trisulfated saturated disaccharides. Particularly, mobile phases were run at a flow rate of 0.1 mL/min according to the following gradient: an isocratic step at 10% B for 5 min, followed by a linear gradient from 10% to 35% B in 35 min; then, column washing and reconditioning in the initial conditions were performed.
Heparinases digests of bovine heparin before and after heparanase addition were separated at the flow rate of 0.15 mL/min using the multistep gradient optimized for multicomponent digestion mixture: isocratic step at 10% B for 5 min, followed by a linear gradient from 10% to 80% B in 55 min; then, phase B was increased up to 90% B and kept for 5 min for column washing, followed by a fast linear gradient to restore the initial conditions and column equilibration over 30 min.
The electrospray interface was set in negative ionization mode (Spray Voltage +3500 V), to record full scan mass spectra in the m/z 140–2500 mass range. Nitrogen was used as a drying (7 L/min) and nebulizing gas (1.8 bar) and the ion transfer capillary was kept at 200 °C. MS/MS fragmentation experiments were produced by collision-induced dissociation (CID) at 20 eV of collision energy. LC-MS profiles and mass spectra were elaborated using the DataAnalysis software (Bruker Daltonics).

3.7. Nomenclature

The abbreviation system used for the oligomers identified by LC-MS includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. Symbols ΔU, U and A were added to indicate a 4,5-unsaturated uronic acid, a saturated one and a glucosamine unit, respectively, at the NRE. Symbols aM.ol and Rc were used to indicate 2,5-anhydromannitol and contracted ring residues typical for dalteparin [12]. When describing the oligosaccharide sequences, parentheses (e.g., (6S)) indicate possible, but variable between positional isomers, presence of sulfate group in the corresponding position.
Dissociation patterns, produced by collision ion dissociation (CID) technique, are described using the nomenclature of Domon and Costello [44].

4. Conclusions

With the increasing need of effective analytical methods aimed to provide full structural characterization of heparin and low-molecular-weight heparin, the introduction of the new heparanase-based strategy, described herein, looks very promising. In fact, the valuable heparinase depolymerization method, which is currently included in numerous analysis schemes of heparins and LMWHs, provides precious structural data but is not sufficient for their full characterization. The introduction of additional studies, including time-consuming isolation of single oligomers, is often requested by the regulatory agencies. We found that the heparanase specificity, used in addition to the existing strategies, represents a potentially powerful approach that can significantly improve elucidation of heparin structural peculiarities by adding another piece to the complex puzzle of heparin full characterization. Given that limited available amounts of pure components represent a major hindrance to structure determination of heparin oligosaccharides, these results, obtained using very a low sample amount, showed a strong potential of heparanase use in developing analytical strategies for heparin structure elucidation allowing to avoid time-consuming intensive procedures of isolation and purification.
It is worth noting that the present strategy used the heparanase depolymerisation step as an additional analytical tool, showing that it may be useful when applied to the samples whose complexity was previously simplified by using other sample preparation methods (e.g., heparinase depolymerization or size-exclusion and/or affinity chromatography) prior to heparanase cleavage. The unambiguous structure assignment of the two major components of a dalteparin octasaccharides fraction allowed to highlight the presence of G–ANS3S6S moieties at their NRE, which is an important structural signature of these drugs, especially in terms of the depolymerization process used in their manufacturing. When applied to bovine heparin oligosaccharides with high affinity for antithrombin, the proposed approach provided relevant structural information about ATBR-related sequences. Specifically, focusing on less abundant components and new positional isomers, the G–ANS3S sequence was expected for many of them. Furthermore, the combination of heparinases and heparanase substrate specificity looks promising for determining additional level of heterogeneity, which is especially useful for comparative studies of these complex drugs. Based on the observed resistance to heparanase of some ATBR-related tetrasaccharides, differences in 6-O-sulfation in heparins from different sources should provide different LC-MS profiles of their heparinases–heparanase digests, and are even more sensitive to their structural differences than the traditional heparinase method.
Last, but not least, the obtained data open up new considerations for an enzymatic mechanism of heparanase action which has not yet been fully understood. Despite the declared ability of an endo-hydrolase enzyme to cleave the substrate within the middle of a chain, we observed a favored cleavage at the end (by release of a glucuronic acid). A certain inhibition from G–ANS3S6S intrachain, probably due to a highly sulfated environment, was also unexpected. Further investigations, including kinetics model studies, are required to provide additional insights on the specificity of heparanase towards these substrates.

Supplementary Materials

The following are available online. Figure S1: Extracted ion chromatograms (EICs) of saturated trisulfated glucosamine ANS3S6S (m/z 417.943, z = −1) in the heparinase digests of octasaccharide dalteparin fraction (a) and the same fraction treated with heparanase prior to heparinase cleavage (b), Figure S2: LC-MS profile of bovine HA fraction and mass signal assignment of the main components: expanded chromatogram focused on oligosaccharides region not affected by the heparanase action (monosulfated disaccharides and linkage region fragments), Figure S3: LC-MS profile of bovine HA fraction and mass signal assignment of the main components: expanded chromatogram focused on oligosaccharides region affected by the heparanase action.

Author Contributions

A.A. and E.U. planned the work, performed the LC-MS experiments and wrote the paper. G.M. performed the isolation of dalteparin octasaccharide fraction and bovine heparin high affinity fractions. A.N., together with A.A. and E.U., contributed to the study design and manuscript revision. All authors discussed the experimental data, and read and approved the final manuscript.

Funding

This research received no external funding.

Acknowledgments

The authors are grateful to Professor Israel Vlodavsky for providing the heparanase enzyme and Giangiacomo Torri and Marco Guerrini for carefully reading the manuscript.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Casu, B.; Lindahl, U. Structure and biological interactions of heparin and heparan sulfate. Adv. Carbohydr. Chem. Biochem. 2001, 57, 159–206. [Google Scholar] [PubMed]
  2. Casu, B.; Naggi, A.; Torri, G. Re-visiting the structure of heparin. Carbohydr. Res. 2015, 403, 60–68. [Google Scholar] [CrossRef] [PubMed]
  3. Yamada, S.; Murakami, T.; Tsuda, H.; Yoshida, K.; Sugahara, K. Isolation of the porcine heparin tetrasaccharides with glucuronate 2-O-sulfate. Heparinase cleaves glucuronate 2-O-sulfate containing disaccharides in highly sulfated blocks in heparin. J. Biol. Chem. 1995, 270, 8696–8705. [Google Scholar] [PubMed]
  4. Casu, B.; Oreste, P.; Torri, G.; Zoppetti, G. The structure of heparin oligosaccharide fragments with high anti-(factor Xa) activity containing the minimal antithrombin III-binding sequence Chemical and 13C nuclear-magnetic-resonance studies. Biochem. J. 1981, 197, 599–609. [Google Scholar] [CrossRef] [PubMed]
  5. Van Boeckel, C.A.A.; Petitou, M. A unique antithrombin binding domain of heparin, a lead to new synthetic antithrombotics. Angew. Chem. Int. Ed. 1993, 32, 1671–1688. [Google Scholar] [CrossRef]
  6. Petitou, M.; Van Boeckel, C.A.A. Synthetic antithrombin III binding pentasaccharide is now a drug! What comes next? Angew. Chem. Int. Ed. 2004, 42, 3118–3133. [Google Scholar] [CrossRef]
  7. Naggi, A.; Gardini, C.; Pedrinola, G.; Mauri, L.; Urso, E.; Alekseeva, A.; Casu., B.; Cassinelli, G.; Guerrini, M.; Iacomini, M.; et al. Structural peculiarity and antithrombin binding region profile of mucosal bovine and porcine heparins. J. Pharm. Biomed. Anal. 2016, 118, 52–64. [Google Scholar] [CrossRef]
  8. Guerrini, M.; Guglieri, S.; Naggi, A.; Sasisekharan, R.; Torri, G. Low molecular weight heparins: structural differentiation by bidimentional nuclear magnetic resonance spectroscopy. Semin. Thromb. Hemost. 2007, 33, 478–487. [Google Scholar] [CrossRef]
  9. Bisio, A.; Vecchietti, D.; Citterio, L.; Guerrini, M.; Raman, R.; Bertini, S.; Eisele, G.; Naggi, A.; Sasisekharan, R.; Torri, G. Structural features of low-molecular weight heparins affecting their affinity to antithrombin. Thromb. Haemost. 2009, 102, 865–873. [Google Scholar] [CrossRef]
  10. Mourier, P.; Viskov, C. Chromatographic analysis and sequencing approach of heparin oligosaccharides using cetyltrimethylammonium dynamically coated stationary phases. Anal. Biochem. 2004, 332, 299–313. [Google Scholar] [CrossRef]
  11. Huang, Y.; Mao, Y.; Zong, C.; Lin, C.; Boons, G.J.; Zaia, J. Discovery of a Heparan Sulfate 3-O-Sulfation Specific Peeling Reaction. Anal. Chem. 2015, 87, 592–600. [Google Scholar] [CrossRef] [PubMed]
  12. Bisio, A.; Urso, E.; Guerrini, M.; Witt, P.; Torri, G.; Naggi, A. Structural Characterization of the Low-Molecular-Weight Heparin Dalteparin by Combining Different Analytical Strategies. Molecules 2017, 22, 1051. [Google Scholar] [CrossRef] [PubMed]
  13. Langeslay, D.J.; Urso, E.; Gardini, C.; Naggi, A.; Torri, G.; Larive, C.K. Reversed-phase ion-pair ultra-high-performance-liquid chromatography–mass spectrometry for fingerprinting low-molecular-weight heparins. J. Chromatogr. A 2013, 1292, 201–210. [Google Scholar] [CrossRef] [PubMed]
  14. Sun, X.; Guo, Z.; Yu, M.; Lin, C.; Sheng, A.; Wang, Z.; Linhardt, R.J.; Chi, L. Hydrophilic interaction chromatography-multiple reaction monitoring mass spectrometry method for basic building block analysis of low molecular weight heparins prepared through nitrous acid depolymerization. J. Chromatogr. A 2017, 1479, 121–128. [Google Scholar] [CrossRef]
  15. Li, G.; Steppich, J.; Wang, Z.; Sun, Y.; Xue, C.; Linhardt, R.J.; Li, L. Bottom-Up Low Molecular Weight Heparin Analysis Using Liquid Chromatography-Fourier Transform Mass Spectrometry for Extensive Characterization. Anal. Chem. 2014, 86, 6626–6632. [Google Scholar] [CrossRef]
  16. Chen, Y.; Lin, L.A.; Zhang, X.; Ange, K. St.; Yu, Y.; Zhang, F.; Liu, J.; Amster, I.J.; Linhardt, R.J. Structural analysis of heparin-derived 3-O-sulfated tetrasaccharides: antithrombin binding site variants. Carbohydr. Polym. 2017, 157, 244–250. [Google Scholar] [CrossRef]
  17. Xiao, Z.; Tappen, B.R.; Ly, M.; Zhao, W.; Canova, L.P.; Guan, H.; Linhardt, R. Heparin mapping using heparin lyases and the generation of a novel low molecular weight heparin. J. Med. Chem. 2011, 54, 603–610. [Google Scholar] [CrossRef]
  18. Sommers, D.C.; Ye, H.; Kolinski, R.E.; Nasr, M.; Buhse, L.F.; Al-Halim, A.; Keire, D. Characterization of currently marketed heparin products: Analysis of molecular weight and heparinase-I digest patterns. Anal. Bioanal. Chem. 2011, 401, 2445–2454. [Google Scholar] [CrossRef]
  19. Wang, B.; Buhse, L.; Al-Hakim, A.; Boyne Ii, M.T.; Keire, D.A. Characterization of currently marketed heparin products: Analysis of heparin digests by RPIP-UHPLC-QTOF-MS. J. Pharm. Biomed. Anal. 2012, 67, 42–50. [Google Scholar] [CrossRef]
  20. Mourier, P.; Anger, P.; Martinez, C.; Herman, F.; Viskov, C. Quantitative compositional analysis of heparin using exhaustive heparinase digestion and strong anion exchange chromatography. Anal. Chem. Res. 2015, 3, 46–53. [Google Scholar] [CrossRef]
  21. Lee, S.; Raw, A.; Yu, L.; Lionberger, R.; Ya, N.; Verthelyi, D.; Rosenberg, A.; Kozlowski, S.; Webber, K.; Woodcock, J. Scientific considerations in the review and approval of generic enoxaparin in the United States. Nat. Biotechnol. 2013, 31, 220–226. [Google Scholar] [CrossRef] [PubMed]
  22. Fairbanks, M.B.; Mildner, A.M.; Leone, J.W.; Cavey, G.S.; Mathews, W.R.; Drong, R.F.; Slightom, J.L.; Bienkowski, M.J.; Smith, C.W.; Bannow, C.A.; et al. Processing of the human heparanase precursor and evidence that the active enzyme is a heterodimer. J. Biol. Chem. 1999, 274, 29587–29590. [Google Scholar] [CrossRef] [PubMed]
  23. Levy-Adam, F.; Miao, H.; Heinrikson, R.L.; Vlodavsky, I.; Ilan, N. Heterodimer formation is essential for heparanase enzymatic activity. Biochem. Biophys. Res. Commun. 2003, 308, 885–891. [Google Scholar] [CrossRef]
  24. Vlodavsky, I.; Friedmann, Y. Molecular properties and involvement of heparanase in cancer metastasis and angiogenesis. J. Clin. Invest. 2001, 108, 341–347. [Google Scholar] [CrossRef] [PubMed]
  25. Pisano, C.; Vlodavsky, I.; Ilan, N.; Zunino, F. The potential of heparanase as a therapeutic target in cancer. Biochem. Pharmacol. 2014, 89, 12–19. [Google Scholar] [CrossRef]
  26. Okada, Y.; Yamada, S.; Toyoshima, M.; Dong, J.; Nakajima, M.; Sugahara, K. Structural recognition by recombinant human heparanase that plays critical roles in tumor metastasis. Hierarchical sulfate groups with different effects and the essential target disulfated trisaccharide sequence. J. Biol. Chem. 2002, 277, 42488–42495. [Google Scholar] [CrossRef]
  27. Peterson, S.B.; Liu, J. Multi-faceted substrate specificity of heparanase. Matrix Biol. 2013, 32, 223–227. [Google Scholar] [CrossRef]
  28. Mao, Y.; Huang, Y.; Buczek-Thomas, J.A.; Ethen, C.M.; Nugent, M.A.; Wu, Z.L.; Zaia, J. A liquid chromatography-mass spectrometry-based approach to characterize the substrate specificity of mammalian heparanase. JBC 2014, 289, 34141–34151. [Google Scholar] [CrossRef]
  29. Bisio, A.; Mantegazza, A.; Urso, E.; Naggi, A.; Torri, G.; Viskov, C.; Casu, B. High-Performance Liquid Chromatographic/Mass Spectrometric Studies on the Susceptibility of Heparin Species to Cleavage by Heparanase. Seminars Thrombosis Hemostasis 2007, 33, 488–495. [Google Scholar] [CrossRef]
  30. Chase, C.; Elaine, G.; Paulo, M. Diversifying the global heparin supply chain: reintroduction of bovine heparin in the United States? Pharm. Technol. 2015, 39, 28–35. [Google Scholar]
  31. Loganathan, D.; Wang, H.M.; Mallis, L.M.; Linhardt, R.J. Structural variation in the antithrombin III binding site region and its occurrence in heparin from different sources. Biochemistry 1990, 29, 4362–4368. [Google Scholar] [CrossRef] [PubMed]
  32. Yamada, S.; Yoshida, K.; Sugiura, M.; Sugahara, K.; Khoo, K.H.; Morris, H.R.; Dell, A. Structural studies on the bacterial lyase-resistant tetrasaccharides derived from the antithrombin III-binding site of porcine intestinal heparin. J. Biol. Chem. 1993, 268, 4780–4787. [Google Scholar] [PubMed]
  33. Li, G.; Yang, B.; Zhang, F.; Xue, C.; Linhardt, R.J. Analysis of 3-O-sulfo group-containing heparin tetrasaccharides in heparin by liquid chromatography-mass spectrometry. J. Biochem. 2014, 449, 3–9. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  34. Wang, Z.; Zhang, T.; Xie, S.; Liu, X.; Li, H.; Linhardt, R.J.; Chi, L. Sequencing of oligosaccharide pool in the low molecular weight heparin dalteparin with offline HPLC and ESI-MS/MS. Carbohydr. Polym. 2018, 183, 81–90. [Google Scholar] [CrossRef]
  35. Alekseeva, A.; Casu, B.; Cassinelli, G.; Guerrini, M.; Torri, G.; Naggi, A. Structural features of glycol-split low-molecular-weight heparins and their heparin lyase generated fragments. Anal. Bioanal. Chem. 2014, 406, 249–265. [Google Scholar] [CrossRef] [Green Version]
  36. Linhardt, R.J.; Loganathan, D.; Al-Hakim, A.; Wang, H.M.; Walenga, J.M.; Hoppensteadt, D.; Fareed, J. Oligosaccharide mapping of low molecular weight heparins: structure and activity differences. J. Med. Chem. 1990, 33, 1639–1645. [Google Scholar] [CrossRef]
  37. Lemoine, J.; Fournet, B.; Despeyroux, D.; Jennings, K.R.; Rosenberg, R.; De Hoffmann, E. Collision-Induced Dissociation of Alkali Metal Cationized and Permethylated Oligosaccharides: Influence of the Collision Energy and of the Collision Gas for the Assignment of Linkage Position. J. Am. Soc. Mass Spectrom. 1993, 4, 197–203. [Google Scholar] [CrossRef] [Green Version]
  38. Spina, E.; Cozzolino, R.; Ryan, E.; Garozzo, D.J. Sequencing of Oligosaccharides by Collision Induced Dissociation Matrix Assisted Laser Desorption/Ionization Mass Spectrometry. Mass Spectrom. 2000, 35, 1042–1048. [Google Scholar] [CrossRef]
  39. Shi, X.; Huang, Y.; Mao, Y.; Naimy, H.; Zaia, J. Tandem mass spectrometryof heparan sulfate negative ions: sulfate loss patterns and chemical modification methods for improvement of product ion profiles. J. Am. Soc. Mass Spectrom. 2012, 23, 1498–1511. [Google Scholar] [CrossRef] [Green Version]
  40. Peterson, S.B.; Liu, J. Deciphering mode of action of heparanase using structurally defined oligosaccharides. J. Biol. Chem. 2012, 287, 34836–34843. [Google Scholar] [CrossRef] [Green Version]
  41. Turnbull, J.E.; Hopwood, J.J.; Gallagher, J.T. A strategy for rapid sequencing of heparan sulphate and heparin saccharides. Proc. Natl. Acad. Sci. USA 1999, 96, 2698–2703. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  42. Nardella, C.; Lahm, A.; Pallaoro, M.; Brunetti, M.; Vannini, A.; Steinkuhler, C. Mechanism of Activation of Human Heparanase Investigated by Protein Engineering. Biochemistry 2004, 43, 1862–1873. [Google Scholar] [CrossRef] [PubMed]
  43. Bitter, T.; Muir, H.M. A modified uronic acid carbazole reaction. Anal. Biochem. 1962, 4, 330–334. [Google Scholar] [CrossRef]
  44. Domon, B.; Costello, C.E. A Systematic Nomenclature for Carbohydrate Fragmentations in FAB-MS/MS Spectra of Glycoconjugates. Glycoconjugate J. 1988, 5, 397–409. [Google Scholar] [CrossRef]
Sample Availability: Samples of the compounds are not available from the authors.
Molecules 24 04403 g001 550
Figure 1. UHPLC/ESI-MS chromatograms of octasaccharide dalteparin fraction isolated by SEC. Two major U8,11,0-aM.ol isomers of interest are shown in the rectangular frame. Monoisotopic m/z values for prevalent ion forms: U8,10,0–aM.ol, m/z 845.135 ([M − 3H + 3DBA]3−); U8,9,1–aM.ol, m/z 875.537 ([M − 3H + 4DBA]3−); A7,10,0–aM.ol, m/z 786.458 ([M − 3H + 3DBA]3−); U8,10,0,Rc–aM.ol, m/z 883.182 ([M − 3H + 4DBA]3−); A7,11,0–aM.ol, m/z 856.160 ([M − 3H + 4DBA]3−); U8,10,1–aM.ol, m/z 902.189 ([M − 3H + 4DBA]3−); U8,11,0–aM.ol, m/z 914.838 ([M − 3H + 4DBA]3−).The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. Symbols U and A were added to indicate a saturated uronic acid and a glucosamine unit, respectively, at the NRE, while aM.ol and Rc indicate 2,5-anhydro-mannitol at the RE and ring-contracted residues [12,35], respectively.
Figure 1. UHPLC/ESI-MS chromatograms of octasaccharide dalteparin fraction isolated by SEC. Two major U8,11,0-aM.ol isomers of interest are shown in the rectangular frame. Monoisotopic m/z values for prevalent ion forms: U8,10,0–aM.ol, m/z 845.135 ([M − 3H + 3DBA]3−); U8,9,1–aM.ol, m/z 875.537 ([M − 3H + 4DBA]3−); A7,10,0–aM.ol, m/z 786.458 ([M − 3H + 3DBA]3−); U8,10,0,Rc–aM.ol, m/z 883.182 ([M − 3H + 4DBA]3−); A7,11,0–aM.ol, m/z 856.160 ([M − 3H + 4DBA]3−); U8,10,1–aM.ol, m/z 902.189 ([M − 3H + 4DBA]3−); U8,11,0–aM.ol, m/z 914.838 ([M − 3H + 4DBA]3−).The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. Symbols U and A were added to indicate a saturated uronic acid and a glucosamine unit, respectively, at the NRE, while aM.ol and Rc indicate 2,5-anhydro-mannitol at the RE and ring-contracted residues [12,35], respectively.
Molecules 24 04403 g001
Molecules 24 04403 g002 550
Figure 2. UHPLC/ESI-MS chromatogram of octasaccharide dalteparin fraction exhaustively digested with heparinases I, II and III prior to the analysis. Monoisotopic m/z values for major digestion products: U2,3,0, m/z 593.975 ([M – H]–) assigned to I2S–ANS6S and G–ANS3S6S; ΔU2,3,0, m/z 575.964 ([M − H]−) assigned to ΔU2S–ANS6S; ΔU4,5,0–aM.ol, m/z 528.480 ([M − 2H]2−) assigned to ΔU2S–ANS6S–I2S–aM.ol6S. The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. Symbols ΔU and U were added to indicate a 4,5-unsaturated uronic acid, saturated uronic acid and a glucosamine unit, respectively, at the nonreducing end (NRE), while aM.ol indicates 2,5-anhydro-mannitol residue at the reducing end (RE).
Figure 2. UHPLC/ESI-MS chromatogram of octasaccharide dalteparin fraction exhaustively digested with heparinases I, II and III prior to the analysis. Monoisotopic m/z values for major digestion products: U2,3,0, m/z 593.975 ([M – H]–) assigned to I2S–ANS6S and G–ANS3S6S; ΔU2,3,0, m/z 575.964 ([M − H]−) assigned to ΔU2S–ANS6S; ΔU4,5,0–aM.ol, m/z 528.480 ([M − 2H]2−) assigned to ΔU2S–ANS6S–I2S–aM.ol6S. The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. Symbols ΔU and U were added to indicate a 4,5-unsaturated uronic acid, saturated uronic acid and a glucosamine unit, respectively, at the nonreducing end (NRE), while aM.ol indicates 2,5-anhydro-mannitol residue at the reducing end (RE).
Molecules 24 04403 g002
Molecules 24 04403 g003 550
Figure 3. UHPLC/ESI-MS chromatograms of octasaccharide dalteparin fraction isolated by SEC (a) before and (b) after heparanase digestion. Monoisotopic m/z values for prevalent ion forms: U3,3,0, m/z 384.500 ([M − 2H]2−); A3,5,0–aM.ol, m/z 449.469 ([M − 2H + DBA]2−); U5,6,0, m/z 737.561 ([M − 2H + DBA]2−); A5,8,0–aM.ol, m/z 931.683 ([M − 2H + 3DBA]2−); U8,10,0–aM.ol, m/z 845.135 ([M − 3H + 3DBA]3−); U8,9,1–aM.ol, m/z 875.537 ([M − 3H + 4DBA]3−); A7,10,0–aM.ol, m/z 786.458 ([M − 3H + 3DBA]3−); U8,10,0,Rc–aM.ol, m/z 883.182 ([M − 3H + 4DBA]3−); A7,11,0–aM.ol, m/z 856.160 ([M − 3H + 4DBA]3−); U8,10,1–aM.ol, m/z 902.189 ([M − 3H + 4DBA]3−); U8,11,0–aM.ol, m/z 914.838 ([M − 3H + 4DBA]3−). The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. Symbols U and A were added to indicate a saturated uronic acid and a glucosamine unit, respectively, at the NRE.
Figure 3. UHPLC/ESI-MS chromatograms of octasaccharide dalteparin fraction isolated by SEC (a) before and (b) after heparanase digestion. Monoisotopic m/z values for prevalent ion forms: U3,3,0, m/z 384.500 ([M − 2H]2−); A3,5,0–aM.ol, m/z 449.469 ([M − 2H + DBA]2−); U5,6,0, m/z 737.561 ([M − 2H + DBA]2−); A5,8,0–aM.ol, m/z 931.683 ([M − 2H + 3DBA]2−); U8,10,0–aM.ol, m/z 845.135 ([M − 3H + 3DBA]3−); U8,9,1–aM.ol, m/z 875.537 ([M − 3H + 4DBA]3−); A7,10,0–aM.ol, m/z 786.458 ([M − 3H + 3DBA]3−); U8,10,0,Rc–aM.ol, m/z 883.182 ([M − 3H + 4DBA]3−); A7,11,0–aM.ol, m/z 856.160 ([M − 3H + 4DBA]3−); U8,10,1–aM.ol, m/z 902.189 ([M − 3H + 4DBA]3−); U8,11,0–aM.ol, m/z 914.838 ([M − 3H + 4DBA]3−). The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. Symbols U and A were added to indicate a saturated uronic acid and a glucosamine unit, respectively, at the NRE.
Molecules 24 04403 g003
Molecules 24 04403 g004 550
Figure 4. LC-MS profile of bovine heparin fraction with high affinity towards antithrombin and mass signal assignment of the main components. Expanded chromatogram focused on oligosaccharides region affected by the heparanase action: (a) heparinase digest of BMH; (b) heparanase digestion of heparinase digest. Dashed arrow—susceptibility toward heparanase action. Solid arrow—some resistance toward heparanase action. The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. Symbol ΔU was added to indicate a 4,5-unsaturated uronic acid at the NRE.
Figure 4. LC-MS profile of bovine heparin fraction with high affinity towards antithrombin and mass signal assignment of the main components. Expanded chromatogram focused on oligosaccharides region affected by the heparanase action: (a) heparinase digest of BMH; (b) heparanase digestion of heparinase digest. Dashed arrow—susceptibility toward heparanase action. Solid arrow—some resistance toward heparanase action. The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. Symbol ΔU was added to indicate a 4,5-unsaturated uronic acid at the NRE.
Molecules 24 04403 g004
Molecules 24 04403 g005 550
Figure 5. LC-MS profiles obtained by extracted ion chromatogram (EIC) of m/z and 999.2 (z = −2) m/z 913.6 (z = −2) values attributed to hexasaccharides ΔU6,7,1 ([M + 3DBA]2– ions) and ΔU6,7,0 ([M + 2DBA]2– ions), respectively, (a) before and (b) after heparanase digestion: (a) heparinase digest of BMH; (b) heparanase digestion of heparinase digest. The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. The symbol ΔU indicates a 4,5-unsaturated uronic acid at the NRE.
Figure 5. LC-MS profiles obtained by extracted ion chromatogram (EIC) of m/z and 999.2 (z = −2) m/z 913.6 (z = −2) values attributed to hexasaccharides ΔU6,7,1 ([M + 3DBA]2– ions) and ΔU6,7,0 ([M + 2DBA]2– ions), respectively, (a) before and (b) after heparanase digestion: (a) heparinase digest of BMH; (b) heparanase digestion of heparinase digest. The abbreviation system includes, in order, the number of monosaccharide residues, sulfate groups, and N-acetyl groups. The symbol ΔU indicates a 4,5-unsaturated uronic acid at the NRE.
Molecules 24 04403 g005
Table
Table 1. MS/MS analysis and ion fragments produced by CID.
Table 1. MS/MS analysis and ion fragments produced by CID.
m/zzFragmentation Ion
Isomer No. 1 (U–ANS3S6S)Isomer No. 2 (U2S–ANS6S)
137.99−10,2X2 (+1 SO3)0,2X2 (+1 SO3)
168.49−2Y2 (+2 SO3)Y2 (+2 SO3)
175.03−1B1B1
198.99−10,2A2 (+1 SO3)-
210.99−1-B1 – CO2 (+1 SO3)
222.01−1-Z2 – H2O (+1 SO3)
Table
Table 2. Structural hypothesis of detected tetrasaccharides based on heparanase action taking into account both the resistance of a few of them and production of specific enzymatic fragments.
Table 2. Structural hypothesis of detected tetrasaccharides based on heparanase action taking into account both the resistance of a few of them and production of specific enzymatic fragments.
Oligosaccharide Identification by Current NomenclatureStructure
∆U4,3,1 *ΔU–ANAc6S–G–ANS3S
∆U4,4,1(1)ΔU–ANAc6S–G–ANS3S6S
∆U4,4,1 (2)*ΔU2S–ANAc6S–G–ANS3S $
∆U4,4,0 (1) *ΔU–ANS6S–G–ANS3S $
∆U4,4,0 (2) *ΔU2S–ANS–G–ANS3S $
∆U4,5,0(1)ΔU–ANS6S–G–ANS3S6S
∆U4,5,0 (2) *ΔU2S–ANS–G–ANS3S6S
∆U4,5,0 (3) *ΔU2S–ANS6S–G–ANS3S $
∆U4,5,1ΔU2S–ANAc6S–G–ANS3S6S
∆U4,6,0 *ΔU2S–ANS6S–G–ANS3S6S
Bold: previously identified structure [7,10,31,32,33]; * Tetrasaccharides showing some resistance to heparanase action; $ Structures hypothesized by the observed resistance to heparanase action and further supported by the extremely small amount of monomer A1,2,0 (attributed to ANS3S).

Share and Cite

MDPI and ACS Style

Alekseeva, A.; Urso, E.; Mazzini, G.; Naggi, A. Heparanase as an Additional Tool for Detecting Structural Peculiarities of Heparin Oligosaccharides. Molecules 2019, 24, 4403. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules24234403

AMA Style

Alekseeva A, Urso E, Mazzini G, Naggi A. Heparanase as an Additional Tool for Detecting Structural Peculiarities of Heparin Oligosaccharides. Molecules. 2019; 24(23):4403. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules24234403

Chicago/Turabian Style

Alekseeva, Anna, Elena Urso, Giulia Mazzini, and Annamaria Naggi. 2019. "Heparanase as an Additional Tool for Detecting Structural Peculiarities of Heparin Oligosaccharides" Molecules 24, no. 23: 4403. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules24234403

Article Metrics

Back to TopTop