Next Article in Journal
Raw Beef Patty Analysis Using Near-Infrared Hyperspectral Imaging: Identification of Four Patty Categories
Next Article in Special Issue
Simplified Markerless Stride Detection Pipeline (sMaSDP) for Surface EMG Segmentation
Previous Article in Journal
Simulation of Layer Thickness Measurement in Thin Multi-Layered Material by Variable-Focus Laser Ultrasonic Testing
Previous Article in Special Issue
PET/ZnO@MXene-Based Flexible Fabrics with Dual Piezoelectric Functions of Compression and Tension
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Sensors
Volume 23
Issue 2
10.3390/s23020695
sensors-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Wearable Noninvasive Glucose Sensor Based on CuxO NFs/Cu NPs Nanocomposites

by
Zhipeng Yu
,
Huan Wu
,
Zhongshuang Xu
,
Zhimao Yang
,
Jian Lv
and
Chuncai Kong
*
Ministry of Education Key Laboratory for Non-Equilibrium Synthesis and Modulation of Condensed Matter, Shaanxi Province Key Laboratory of Advanced Functional Materials and Mesoscopic Physics, School of Physics, Xi’an Jiaotong University, Xi’an 710049, China
*
Author to whom correspondence should be addressed.
Sensors 2023, 23(2), 695; https://0-doi-org.brum.beds.ac.uk/10.3390/s23020695
Submission received: 15 December 2022 / Revised: 2 January 2023 / Accepted: 4 January 2023 / Published: 7 January 2023
(This article belongs to the Special Issue Wearable Biomedical Devices and Sensors)
Browse Figures
Review Reports Versions Notes

Abstract

:
Designing highly active material to fabricate a high-performance noninvasive wearable glucose sensor was of great importance for diabetes monitoring. In this work, we developed CuxO nanoflakes (NFs)/Cu nanoparticles (NPs) nanocomposites to serve as the sensing materials for noninvasive sweat-based wearable glucose sensors. We involve CuCl2 to enhance the oxidation of Cu NPs to generate Cu2O/CuO NFs on the surface. Due to more active sites endowed by the CuxO NFs, the as-prepared sample exhibited high sensitivity (779 μA mM−1 cm−2) for noninvasive wearable sweat sensing. Combined with a low detection limit (79.1 nM), high selectivity and the durability of bending and twisting, the CuxO NFs/Cu NPs-based sensor can detect the glucose level change of sweat in daily life. Such a high-performance wearable sensor fabricated by a convenient method provides a facile way to design copper oxide nanomaterials for noninvasive wearable glucose sensors.

1. Introduction

To control the evolution of diabetes mellitus and its dangerous consequences, it is crucial to constantly monitor the in-vivo and in-vitro glucose concentration in the blood or other bodily fluids [1,2]. Beyond using human blood as the analyte for invasive glucose sensing, sweat is also considered a promising target to indicate the blood glucose level owing to the non-invasive epidermal sensing [3,4]. Due to their excellent selectivity, strong anti-interference performance and high compatibility, glucose oxidase and glucose dehydrogenase electrochemical sensing technologies have been the primary foundation for human glucose sensors up to this point [5]. But pH, temperature, and dissolved oxygen all played a significant role in how active enzymes were.
Due to their stability and superior detection capability, several metal materials, especially gold [1,6,7,8], platinum [9], copper [10,11] and nickel [12,13,14], have gained a lot of emphasis in non-enzymatic glucose sensors [15]. Noble metal materials are pricey, which has hindered their utilization in non-enzymatic glucose sensors [16]. Despite the fact that inexpensive transition metals and their alloys had glucose-sensing properties, surface poisoning proved a significant issue [17]. Copper oxides deliver excellent electrochemical activity [18] and own a sufficient potential for non-enzymatic glucose oxidation [19,20,21,22,23]. Cu(II) oxide and Cu(I) oxide are widely known copper oxides that have outstanding sensing capacities. An electron pair reaction involving the redox couple ions Cu(III) and Cu(II) formed the foundation for the sensing mechanism [24,25]. The continuous transformation of electrons was available by the redox pair ions, which serve as an intermediary mediator [26,27,28,29]. The copper oxide function layer allows the glucose to transfer its released electrons to the current collector [30,31,32].
An abundance of active sites for the electrocatalytic reaction can be provided by a large surface area without the cover of surfactants, thus improving the sensor’s sensitivity. This is even more valuable when considering the low glucose concentration in human sweat [33]. Our previous work used H2O2 as the oxidant to directly grow the high surface area Cu2O/CuO nanosheets on the surface of a copper foil [34,35]. The surface of these nanosheets is active for glucose sensing, as no organic surfactant was involved in the reaction. However, the capability for H2O2 to oxide the Cu foil is limited and a high temperature (180 °C) is required to enhance the oxidation reaction [34]. When the Cu foil was replaced by the Cu nanowires, the generation of nanosheets can be performed at room temperature, but the reaction requires an extended duration [35]. The novel strategy was required to improve the oxidation capability of H2O2 to produce highly glucose-sensitive copper oxide materials for human sweat detection.
In this work, we synthesized CuxO NFs/Cu NPs nanocomposites with abundant active sites with the help of CuCl2 and then evaluated their ability for noninvasive wearable glucose sensing. The schematic representation of the synthesis process and its application mechanism in noninvasive glucose detection was demonstrated in Figure 1. The involvement of CuCl2 can strengthen the oxidation of Cu nanoparticles to CuxO nanoflakes at room temperature. The CuxO NFs/Cu NPs nanocomposites based noninvasive wearable glucose sensor delivers high sensitivity, good stability, anti-inferring capability, and durability to mechanical deformation, enabling its application in monitoring glucose level change in human sweat. Our work demonstrates that the as-prepared CuxO NFs/Cu NPs nanocomposites deliver high performance in sweat glucose sensing, enriching the application of metal oxide in wearable electrochemical sensors.

2. Materials and Methods

2.1. Chemicals and Reagents

Commercial Cu nanoparticles (NPs), CuCl2·2H2O, NaOH, NaCl, glucose, ascorbic acid (AA), Uric acid (UA), Urea, Nafion, KCl, K₃[Fe(CN)₆], K₄Fe(CN)₆, isopropanol and ethanol were purchased from Aladdin Co. and were used as-received without further purification (Analytically Reagent, AR, USA). BOPP waterproof tape (Box Sealing Tape-375) were purchased from 3M China Co., Ltd.. PU film (Medical no sensitive breathable tape, PU film-type C) were purchased from Shanghai Hons Medical Technology Co., Ltd. (Shanghai, China). Deionized water (18.4 MΩ cm−1, 23 °C) was used for all solutions preparation.

2.2. Instruments

A Bruker-AXS D8 ADVANCE diffractometer (Cu, kα = 0.1506 nm) was used to perform the X-ray diffraction (XRD) measurement. Thermo Fisher ESCALAB Xi+ (Al, Kα) was used for X-ray photoelectron spectroscopy (XPS). JSM-7000F field-emission scanning electron microscope (FE-SEM, JEOL, 15 kV) and JEM-2100 transmission electron microscope (TEM, JEOL, AC 120 kV) were used to assess morphology and HRTEM images, respectively. For electrochemical measurements, a CHI-660e electrochemical workstation was used.

2.3. Preparation of the CuxO NFs/Cu NPs Nanocomposites

In a typical procedure, 0.1 g of Cu NPs was dispersed in DI water (10 mL) by 30 min ultrasonication. 1 mL of CuCl2·2H2O aqueous solution (0.1 M) was added to the suspension and stirred for 15 min. The obtained products were then centrifuged, washed with absolute alcohol and deionized water three times and dried at a 60 °C vacuum atmosphere for 2 h. Then 0.1 g of dried product was added in DI water (5 mL) and stirred for 30 min. 0.1 M H2O2 aqueous solution (10 mL) was added to the suspension and with further string for 2 h. The final products were then centrifuged, washed with absolute alcohol and deionized water three times, then dried at a 60 °C vacuum atmosphere for 10 h.

2.4. Preparation of the CuO NFs/Cu NPs Nanocomposites

0.1 g of Cu NPs was added into DI water (5 mL) and stirred for 30 min. 0.1 M H2O2 aqueous solution (10 mL) was added to the suspension and follower by 2 h stirring. The obtained products were then centrifuged, washed with absolute alcohol and deionized water three times, then dried at a 60 °C vacuum atmosphere for 10 h.

2.5. Preparation of the CuxO NFs/Cu NPs Nanocomposites-Based Wearable Sensor

The CuxO NFs/Cu NPs nanocomposites-based noninvasive wearable sensor was fabricated on the screen-printed electrodes with Ag/AgCl as the reference electrode, and carbon as both the counter electrode and the working electrode. The substrate is a polyethylene terephthalate film. Typically, 1 mg samples were dispersed in a solution composed of 250 μL isopropanol, 250 μL DI water mixed and 15 μL Nafion solution (isopropanol solution, 5%). The suspension was further mixed under ultrasonic agitation for 2 h and then 2 μL of the mixture was dropped onto the working electrode (diameter is 3 mm), followed by drying at room temperature for 6 h. For wearable application, the intergrade electrode was attached to the BOPP waterproof tape and following covered by PU film.

2.6. Electrochemical Measurements

All the electrochemical experiments were conducted using a three-electrode electrochemical system. The electrolyte is a 100 μL aqueous solution of NaOH (0.1 M, pH~13) and NaCl (0.1 M). Cyclic Voltammograms (CVs) were recorded between 0 and 0.7 V. CVs were collected between 0 and 0.1 V for ECSA measurement. The electrolyte used in Electrochemical Impedance Spectroscopy (EIS) measurements is a combination of 0.1 KCl, 0.1 M K3[Fe(CN)6] and 0.1 M K4Fe(CN)6.

3. Results and Discussion

3.1. Characterization of Materials

After the successive treatment of CuCl2 aqueous solution and H2O2 aqueous solution, Cu NPs were transferred to the intermediate product of Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites and the final products are CuxO NFs/Cu NPs nanocomposites. The morphology of CuxO NFs/Cu NPs nanocomposites was characterized by FESEM (Figure 2a), TEM (Figure 2b), HRTEM (Figure 2c,d), line profile (Figure 2 insert c1,d1) and FFT (Figure 2 insert c2,d2). The FESEM and TEM show the as fabricated products mainly consist of nanoflakes, which deliver a high surface area for lateral glucose sensing. The interplanar distances of 0.2465 nm and 0.2381 nm measured from HRTEM images (Figure 2c,d) belong to the (111) and (111) planes of Cu2O and CuO, respectively. As a comparison, the CuO NFs/Cu NPs nanocomposites without the involvement of CuCl2 treatment show a similar morphology with that of CuxO NFs/Cu NPs nanocomposites (Figure S1d–f), suggesting that the H2O2 is the key step to generate the nanoflakes structure. In addition, as shown in Figure S2a–c, the intermediate product of Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites still show the solid particle shape.
The crystal structure of CuxO NFs/Cu NPs nanocomposites was measured by XRD. The pattern of CuxO NFs/Cu NPs nanocomposites (Figure 2e) have the peaks of CuO (marked with plus sign, JCPDS No. 44-0706), Cu2O (marked with minus sign, JCPDS No. 05-0667) and Cu (marked with asterisk sign, JCPDS No. 04-0836). The peaks of CuxO NFs/Cu NPs nanocomposites at 43.4°, 50.5° and 74.2° corresponding to lattice plane (111), (200) and (220) of Cu, suggesting that Cu NPs are still not fully transformed into the oxides during the treatment of CuCl2 and the subsequent oxidation of H2O2. However, compared to the CuO NFs/Cu NPs nanocomposites, the peaks of Cu are much weak, indicating the introduction of CuCl2 can enhance the following oxidation reaction to generate more copper oxide nanoflakes as shown in the XRD pattern of the intermediate product of Cu2(OH)3Cl/CuCl in Figure S2d, the pattern can be attributed to Cu2(OH)3Cl (marked with equal sign, JCPDS No. 86-1391), CuCl (marked with pound sign, JCPDS No. 06-0344) and Cu (marked with asterisk sign). The Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites were synthesized by Cu NPs following treatment with CuCl2 aqueous solution, as shown in Figure S1a–c, Figure 2e and Figure S2c,d. In the subsequent oxidation by H2O2, these intermediate products were transferred to Cu2O and CuO nanoflakes.
To further investigate the valence state of the synthesized materials, XPS spectra (Figure 2f) of CuxO NFs/Cu NPs nanocomposites were carried out. In CuxO NFs/Cu NPs nanocomposites, the peaks located at 934.6 eV and 953.7 eV were assigned to the Cu 2p3/2 and Cu 2p1/2 of CuO, suggesting the presence of CuO [36]. The existence of shake-up satellite peaks at higher binding energy around 941.2 eV also confirmed the CuO state. Meanwhile, there were doublet peaks at 932.84 eV and 955.2 eV which were assigned to the Cu 2p3/2 and Cu 2p1/2 of Cu2O [34]. Only peaks belonging to Cu (932.3 eV and 952.1 eV) and CuO (933.1 eV and 953.0 eV) were found in the XPS spectra of commercial Cu NPs and the sample without the involvement of CuCl2 [23]. The XPS results further suggest that the CuO/Cu2O layer was formed on the surface of Cu NPs.

3.2. Electrochemical Measurements

The electrochemical measurement was performed on flexible sensor chips, as shown in Figure 3a. The CV characteristics of the bare Nafion, Cu NPs, Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites, CuxO NFs/Cu NPs nanocomposites and CuO NFs/Cu NPs nanocomposites were measured to compare their electrocatalytic performance (Figure S3a–f). As shown in Figure 3b, the current response of curves of CuxO NFs/Cu NPs nanocomposites is much higher than that of bare Nafion, Cu NPs, Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites and CuO NFs/Cu NPs nanocomposites with the presence of 1.0 mM glucose. The CuCl2 transfer more Cu to generate Cu2O/CuO NFs and thus the response was much higher than that of the CuO NFs/Cu NPs nanocomposites. The response of the CuxO NFs/Cu NPs nanocomposites-based sensor gradually raised towards the oxidation of glucose when the concentration was increased to 2.5 mM and the catalytic current peak ranges from 0.40 V to 0.60 V (Figure 3c). The CV property of CuxO NFs/Cu NPs nanocomposites with different scan rates (v) was tested from 5 mV s−1 to 50 mV s−1 with the presence of 1.0 mM glucose concentration. The CVs of Cu NPs, CuO NFs/Cu NPs nanocomposites, Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites, CuxO NFs/Cu NPs nanocomposites with varied scan rates were shown in Figure S4a–d for studying the electrochemical active surface area (ECSA). The extracted calibration curves of current response versus the scan rates with different samples for ECSA was shown in Figure S4e. The ECSA of Cu NPs, Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites, CuO NFs/Cu NPs nanocomposites and CuxO NFs/Cu NPs nanocomposites were 118.51 μF·cm−2, 167.07 μF·cm−2, 50.8 μF·cm−2 and 140.05 μF·cm−2, respectively. In addition, the Electrochemical Impedance Spectroscopy (EIS) of Cu NPs, Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites, CuO NFs/Cu NPs nanocomposites and CuxO NFs/Cu NPs nanocomposites was measured and fitted in Figure S4f. As shown in Figure S4f, the transfer resistance value of Cu NPs, Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites, CuO NFs/Cu NPs nanocomposites and CuxO NFs/Cu NPs nanocomposites were 506.2 ohm, 339.6 ohm, 787.3 ohm and 198.7 ohm, respectively. This result demonstrated that, after the CuCl2 aqueous solution treatment and H2O2 aqueous solution, the ECSA was notably increased and transfer resistance value was highly reduced. As shown in Figure S5a,b, the oxidation peak current of the as-prepared sensor rises with the scan rate and the corresponding fitting equation is I = 11.34 × v0.5 − 35.49. The linear relationship between the response current intensity and the square root of the scan rate suggests that the adsorption of glucose determined the redox reaction [34].
The amperometric curves of the CuxO NFs/Cu NPs nanocomposites-based sensor at different potentials upon increased glucose concentration are shown in Figure S6a–e. Figure 3d shows the extracted curves of a current response versus the glucose concentration at different potentials. It is found that the current responses at +0.40 V, +0.45 V, +0.5 V, +0.55 V and +0.6 V are lower than that at +0.55 V. So, the following amperometric curves were tested at +0.55 V. To calculate the sensitivity of the sensor, the amperometric responses of CuxO NFs/Cu NPs nanocomposites-based sensor at +0.55 V with the increased glucose concentration were measured and the calibration curve between glucose concentration and the current was shown in Figure 3e,f, respectively. The sensitivity of the as-prepared sensor was 779 μA mM−1 cm−2 based on the linear fitting equation (I(μA) =9.93 + 0.055 × C (μM)), which was 4.0-fold that of CuO NFs/Cu NPs nanocomposites (196 μA mM−1 cm−2) (Figure S7). The relationship between current and glucose concentration follows the Michaelis-Menten equation. The response current intensity j could be expressed by j = Kcat × [S]/(Km + [S]) [34], in which the Kcat, [S], Km are substrate concentration, Michaelis constant, apparent catalytic turnover rate, respectively. In an extreme case, if the glucose concentration was at a low range and the Km was larger than [S], the response current intensity j exhibits linear relation with the concentration of glucose. The detection limit was calculated by 3σ/s and the σ and s are defined as the background current’s standard deviation and the slope of the calibration curve, respectively. The detection limit of the CuxO NFs/Cu NPs nanocomposites-based sensor was 79.1 nM. Table 1 shows the performance comparison among the CuxO NFs/Cu NPs nanocomposites-based sensor and several reported non-enzyme glucose sensors. The as-prepared CuxO NFs/Cu NPs nanocomposites-based sensor exhibits better overall performances than other sensors for more abundant active sites from nanoflake structure.
Figure 4a shows the amperometric response stability of CuxO NFs/Cu NPs nanocomposites sensor at 1.0 mM glucose during 1000 s testing and no significant attenuation was detected. The amperometric responses of the sensor were measured 6 times and no remarkable deviation among each measurement, suggesting the great repeatability of our CuxO NFs/Cu NPs nanocomposites-based sensor (Figure 4b). The anti-interference performance was measured by injecting 1.0 mM glucose first and then subsequently adding 10 mM urea, ascorbic acid (AA) and uric acid (UA). As shown in Figure 4c, signal responses of the sensor toward interfering chemicals were quite weak. In comparison, the sensor generated a strong current response when glucose was reinjected. The intensity of the second responding current was close to that of the first one. Figure 4d shows the normalized current response of different interfering species and the current response to 1.0 mM glucose was set as 100%. CuxO NFs/Cu NPs nanocomposites-based sensors exhibited excellent anti-interference performances. These results suggest that the CuxO NFs/Cu NPs nanocomposites-based sensor was reliable and suitable for the following noninvasive wearable glucose sensing.

3.3. Real Sample Analysis

The CuxO NFs/Cu NPs nanocomposites-based sensor not only shows superior electrochemical performance but also delivers good flexibility, making it suitable for wearable applications. To evaluate the flexibility of our sensor, we test the sensing performance after repeated bending and twisting conditions. In our experiment, the sensor was twisted and bent to 90°, and then unfolded to restore to the original geometry, as shown in Figure 5a,b. After the deformation was completed, the sensor returned to its original state. The durability of mechanical deformation was assessed by checking the response to a glucose solution. After 100, and 500 cycles, respective amperometric tests were performed. Figure 5c,d show the amperometric responses of the sensor toward 0.5 mM glucose before and after cycling twisting and bending, respectively. The amperometric responses demonstrate that the sensor exhibits robust performance against repeated mechanical deformation, with insignificant departure from the original condition. The flexibility ensures good contact between the sensor and human skin and durability to mechanical deformation guarantees reliable sensing.
To further demonstrate the effectiveness of the CuxO NFs/Cu NPs nanocomposites-based glucose sensor for wearable monitoring, the sensor was mounted on the arm of one volunteer to detect glucose concentrations in human sweat during the exercise (Figure 5e). In this study, a healthy subject (32 years old) who has no medical history of diabetes participated in the experiment. Before the mounting of the sensor, disinfection and cleansing were performed on the arm skin. The PU film was used to protect the sensor and keep the measurement condition with a steady wire connection. Then the volunteer was asked to do 30 min rope skipping to secrete sweat. The sweat sample was measured in situ without any treatment. As shown in Figure 5f, the sweat glucose concentrations of the volunteer changed before (−30 min) and after (+30 min, +3 h and +5 h) remarkably. The measured current response before a meal was lower than after a meal, suggesting that the glucose level in the subject’s sweat increased. Although the detection current has slight fluctuation, the obtained results show that the sensor signal increased when the glucose concentration of sweat was changed, promising the application of wearable CuxO NFs/Cu NPs nanocomposites-based sensors in detecting the glucose concentration in human sweat sensors.

4. Conclusions

In conclusion, the CuxO NFs/Cu NPs nanocomposites with a high surface area were successfully fabricated through the involvement of CuCl2. Its application as non-enzyme noninvasive wearable glucose sensor was evaluated. The as-prepared sensor electrode exhibits high sensitivity (779 μA mM−1 cm−2), wide linear range (higher than 2.5 mM), low detection limit (79.1 nM), durability to twisting and bending deformation and good selectivity. The sensitivity of CuxO NFs/Cu NPs-based sensor was 3 times higher than that of the sensor based on CuO NFs/Cu NPs nanocomposites synthesized without CuCl2. The detection of glucose concentration in human sweat samples was successfully measured, indicating its potential application as a noninvasive wearable glucose sensor.

Supplementary Materials

The following supporting information can be downloaded at: https://0-www-mdpi-com.brum.beds.ac.uk/article/10.3390/s23020695/s1, Supporting Information is available from the Wiley Online Library or from the author. Figure S1: SEM and TEM images of (a,b), (c) Cu NPs and (d,e), (f) CuO NFs/Cu NPs nanocomposites; Figure S2: (a,b) SEM, (c) TEM images and (d) XRD pattern of intermediate product Cu2(OH)3Cl/CuCl/Cu NPs nanocomposite; Figure S3: CV performed in variation glucose concentration with (a) Cu NPs, (b) CuO NFs/Cu NPs nanocomposites, (c) Cu2(OH)3Cl/CuCl/Cu NPs nanocomposite, (d) CuxO NFs/Cu NPs nanocomposites, (e) Bare Nafion of the 100 mV/s scanning rate. (f) CVs performed with different samples without the presence of glucose; Figure S4: CV performed in variation scan rate for ECSA measure with (a) Cu NPs, (b) CuO NFs/Cu NPs nanocomposites, (c) Cu2(OH)3Cl/CuCl/Cu NPs nanocomposites, (d) CuxO NFs/Cu NPs nanocomposites. (e) The extracted calibration curves of a current response versus the scan rate with different samples. (f) EIS fitting performed with different samples without glucose; Figure S5: (a) CV performed in 1.0 mM glucose with variation of the scanning rate on CuxO NFs/Cu NPs nanocomposites and (b) Oxidation current density at +0.55 V on the speed of scanning rate; Figure S6: Amperometric response of CuxO NFs/Cu NPs nanocomposite-based sensor by a stepwise increase of the glucose concentration with (a) +0.4 V, (b) +0.45 V, (c) +0.5 V, (d) +0.55 V, (e) +0.6 V; Figure S7: Amperometric response by a stepwise increase of the glucose concentration with (a) Cu NPs, (b) CuO NFs/Cu NPs nanocomposite, (c) Cu2(OH)3Cl/CuCl/Cu NPs nanocomposite, (d) CuxO NFs/Cu NPs nanocomposite, (e) Bare Nafion and (f) the extract amperometric curve of three sensors.

Author Contributions

Conceptualization, C.K. and J.L.; Data curation, Z.Y. (Zhipeng Yu), H.W. and Z.X.; Methodology, C.K. and J.L.; Data analysis, C.K., J.L. and Z.Y. (Zhipeng Yu); Investigation, Z.Y. (Zhipeng Yu) and H.W.; Writing—original draft preparation, Z.Y. (Zhipeng Yu); Resources, Z.Y. (Zhimao Yang) and C.K.; Writing—review and editing, C.K. and J.L.; Supervision, C.K. and J.L.; Project administration, C.K. and J.L.; Funding acquisition, Z.Y. (Zhimao Yang) and C.K. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by [National Natural Science Foundation of China] grant number [92066207], [Shccig-Qinling Program] grant number [2021JLM-27], [the Innovation Capability Support Program of Shaanxi Province] grant number [2023-CX-TD-49, 2020TD-001], [Lanzhou University-Jinchuan Group Chemical Co., Ltd. Chemical Environmental Protection Industry Joint Laboratory] grant number [(20)0837].

Institutional Review Board Statement

Ethical review and approval were waived for this study due to the use of non-invasive measures. The participants provided their written informed consent to participate in this study.

Informed Consent Statement

Informed consent was obtained from all subjects involved in the study.

Data Availability Statement

The data are not publicly available due to the relevant project regulations.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Zhao, Z.T.; Li, Q.G.; Sun, Y.J.; Zhao, C.C.; Guo, Z.H.; Gong, W.P.; Hu, J.; Chen, Y. Highly sensitive and portable electrochemical detection system based on AuNPs@CuO NWs/Cu2O/CF hierarchical nanostructures for enzymeless glucose sensing. Sens. Actuators B Chem. 2021, 345, 130379. [Google Scholar] [CrossRef]
  2. Metelka, R.; Vlasakova, P.; Smarzewska, S.; Guziejewski, D.; Vlcek, M.; Sys, M. Screen-Printed Carbon Electrodes with Macroporous Copper Film for Enhanced Amperometric Sensing of Saccharides. Sensors 2022, 22, 3466. [Google Scholar] [CrossRef]
  3. Kim, J.; Jeerapan, I.; Sempionatto, J.R.; Barfidokht, A.; Mishra, R.K.; Campbell, A.S.; Hubble, L.J.; Wang, J. Wearable Bioelectronics: Enzyme-Based Body-Worn Electronic Devices. Acc. Chem. Res. 2018, 51, 2820–2828. [Google Scholar] [CrossRef]
  4. Cappon, G.; Acciaroli, G.; Vettoretti, M.; Facchinetti, A.; Sparacino, G. Wearable Continuous Glucose Monitoring Sensors: A Revolution in Diabetes Treatment. Electronics 2017, 6, 65. [Google Scholar] [CrossRef] [Green Version]
  5. Kang, B.C.; Park, B.S.; Ha, T.J. Highly sensitive wearable glucose sensor systems based on functionalized single-wall carbon nanotubes with glucose oxidase-nafion composites. Appl. Surf. Sci. 2019, 470, 13–18. [Google Scholar] [CrossRef]
  6. Zhong, S.L.; Zhuang, J.; Yang, D.P.; Tang, D. Eggshell membrane-templated synthesis of 3D hierarchical porous Au networks for electrochemical nonenzymatic glucose sensor. Biosens. Bioelectron. 2017, 96, 26–32. [Google Scholar] [CrossRef]
  7. Lipińska, W.; Siuzdak, K.; Karczewski, J.; Dołęga, A.; Grochowska, K. Electrochemical glucose sensor based on the glucose oxidase entrapped in chitosan immobilized onto laser-processed Au-Ti electrode. Sens. Actuators B Chem. 2021, 330, 129409. [Google Scholar] [CrossRef]
  8. Jiang, M.; Sun, P.; Zhao, J.; Huo, L.; Cui, G. A Flexible Portable Glucose Sensor Based on Hierarchical Arrays of Au@Cu(OH)2 Nanograss. Sensors 2019, 19, 5055. [Google Scholar] [CrossRef] [Green Version]
  9. Meng, L.; Jin, J.; Yang, G.; Lu, T.; Zhang, H.; Cai, C. Nonenzymatic electrochemical detection of glucose based on palladium-single-walled carbon nanotube hybrid nanostructures. Anal. Biochem. 2009, 81, 7271–7280. [Google Scholar] [CrossRef]
  10. Yin, H.Y.; Cui, Z.Z.; Wang, L.; Nie, Q. In situ reduction of the Cu/Cu2O/carbon spheres composite for enzymaticless glucose sensors. Sens. Actuators B Chem. 2016, 222, 1018–1023. [Google Scholar] [CrossRef]
  11. Mazurkow, J.; Kusior, A.; Radecka, M. Nonenzymatic Glucose Sensors Based on Copper Sulfides: Effect of Binder-Particles Interactions in Drop-Casted Suspensions on Electrodes Electrochemical Performance. Sensors 2021, 21, 802. [Google Scholar] [CrossRef] [PubMed]
  12. Heyser, C.; Schrebler, R.; Grez, P. New route for the synthesis of nickel (II) oxide nanostructures and its application as non-enzymatic glucose sensor. J. Electroanal. Chem. 2019, 832, 189–195. [Google Scholar] [CrossRef]
  13. Chen, X.R.; He, X.M.; Gao, J.; Jiang, J.Z.; Jiang, X.F.; Wu, C. Three-dimensional porous Ni, N-codoped C networks for highly sensitive and selective non-enzymatic glucose sensing. Sens. Actuators B Chem. 2019, 299, 126945. [Google Scholar] [CrossRef]
  14. Guo, C.; Wang, Y.; Zhao, Y.; Xu, C. Non-enzymatic glucose sensor based on three dimensional nickel oxide for enhanced sensitivity. Anal. Methods 2013, 5, 1644–1647. [Google Scholar] [CrossRef]
  15. Mamleyev, E.R.; Weidler, P.G.; Nefedov, A.; Szabo, D.V.; Islam, M.; Mager, D.; Korvink, J.G. Nano- and Microstructured Copper/Copper Oxide Composites on Laser-Induced Carbon for Enzyme-Free Glucose Sensors. ACS Appl. Nano Mater. 2021, 4, 13747–13760. [Google Scholar] [CrossRef]
  16. Noh, H.B.; Lee, K.S.; Chandra, P.; Won, M.S.; Shim, Y.B. Application of a Cu-Co alloy dendrite on glucose and hydrogen peroxide sensors. Electrochim. Acta 2012, 61, 36–43. [Google Scholar] [CrossRef]
  17. Wang, W.; Zhang, L.; Tong, S.; Li, X.; Song, W.B. Three-dimensional network films of electrospun copper oxide nanofibers for glucose determination. Biosens. Bioelectron. 2009, 25, 708–714. [Google Scholar] [CrossRef]
  18. Pu, F.Z.; Kong, C.C.; Lv, J.; Ma, B.; Zhang, W.Q.; Zhang, X.J.; Yang, S.; Jin, H.; Yang, Z.M. CuO ultrathin nanosheets decorated reduced graphene oxide as a high performance anode for lithium-ion batteries. J. Alloys Compd. 2019, 805, 355–362. [Google Scholar] [CrossRef]
  19. Kong, C.; Lv, J.; Hu, X.; Zhao, N.; Liu, K.; Zhang, X.; Meng, G.; Yang, Z.; Yang, S. Template-synthesis of hierarchical CuO nanoflowers constructed by ultrathin nanosheets and their application for non-enzymatic glucose detection. Mater. Lett. 2018, 219, 134–137. [Google Scholar] [CrossRef]
  20. Pu, F.; Miao, H.; Lu, W.; Zhang, X.; Yang, Z.; Kong, C. High-performance non-enzymatic glucose sensor based on flower-like Cu2O-Cu-Au ternary nanocomposites. Appl. Surf. Sci. 2022, 581, 152389. [Google Scholar] [CrossRef]
  21. Lan, T.; Fallatah, A.; Suiter, E.; Padalkar, S. Size Controlled Copper (I) Oxide Nanoparticles Influence Sensitivity of Glucose Biosensor. Sensors 2017, 17, 1944. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  22. Lin, L.-Y.; Karakocak, B.B.; Kavadiya, S.; Soundappan, T.; Biswas, P. A highly sensitive non-enzymatic glucose sensor based on Cu/Cu2O/CuO ternary composite hollow spheres prepared in a furnace aerosol reactor. Sens. Actuators B Chem. 2018, 259, 745–752. [Google Scholar] [CrossRef]
  23. Huang, J.; Zhu, Y.; Yang, X.; Chen, W.; Zhou, Y.; Li, C. Flexible 3D porous CuO nanowire arrays for enzymeless glucose sensing: In situ engineered versus ex situ piled. Nanoscale 2015, 7, 559–569. [Google Scholar] [CrossRef] [PubMed]
  24. Motoc, S.; Cretu, C.; Costisor, O.; Baciu, A.; Manea, F.; Szerb, E.I. Cu(I) Coordination Complex Precursor for Randomized CuOx Microarray Loaded on Carbon Nanofiber with Excellent Electrocatalytic Performance for Electrochemical Glucose Detection. Sensors 2019, 19, 5353. [Google Scholar] [CrossRef] [Green Version]
  25. Pu, F.; Yu, Z.; Lu, W.; Kong, C.; Lin, R.; Bai, X.; Zhang, X.; Lv, J.; Yang, Z. RGO@Cu2O@Cu Ternary Nanocomposite for High-Performance Non-Enzymatic Glucose Detection. J. Electrochem. Soc. 2021, 168, 087503. [Google Scholar] [CrossRef]
  26. Kano, K.; Takagi, K.; Inoue, K.; Ikeda, T.; Ueda, T. Copper electrodes for stable subpicomole detection of carbohydrates in high-performance liquid chromatography. J. Chromatogr. A 1996, 721, 53–57. [Google Scholar] [CrossRef]
  27. Kano, K.; Torimura, M.; Esaka, Y.; Goto, M.; Ueda, T. Electrocatalytic oxidation of carbohydrates at copper (II)-modified electrodes and its application to flow-through detection. J. Electroanal. Chem. 1994, 372, 137–143. [Google Scholar] [CrossRef]
  28. Xie, Y.Q.; Huber, C.O. Electrocatalysis and Amperometric Detection Using an Electrode Made of Copper-Oxide and Carbon Paste. Anal. Chem. 1991, 63, 1714–1719. [Google Scholar] [CrossRef]
  29. Ghanem, M.A.; Compton, R.G.; Coles, B.A. Microwave activation of the electro-oxidation of glucose in alkaline media. Phys. Chem. Chem. Phys. 2005, 7, 3552–3559. [Google Scholar] [CrossRef]
  30. Zhang, L.; Ni, Y.; Li, H. Addition of porous cuprous oxide to a Nafion film strongly improves the performance of a nonenzymatic glucose sensor. Microchim. Acta 2010, 171, 103–108. [Google Scholar] [CrossRef]
  31. Liu, X.; Sui, Y.; Yang, X.; Jiang, L.; Wang, F.; Wei, Y.; Zou, B. A feasible approach to synthesize Cu2O microcrystals and their enhanced non-enzymatic sensor performance. RSC Adv. 2015, 5, 59099–59105. [Google Scholar] [CrossRef]
  32. Wang, G.; He, X.; Wang, L.; Gu, A.; Huang, Y.; Fang, B.; Geng, B.; Zhang, X. Non-enzymatic electrochemical sensing of glucose. Microchim. Acta 2013, 180, 161–186. [Google Scholar] [CrossRef]
  33. Abellan-Llobregat, A.; Jeerapan, I.; Bandodkar, A.; Vidal, L.; Canals, A.; Wang, J.; Morallon, E. A stretchable and screen-printed electrochemical sensor for glucose determination in human perspiration. Biosens. Bioelectron. 2017, 91, 885–891. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  34. Lv, J.; Kong, C.C.; Xu, Y.; Yang, Z.M.; Zhang, X.J.; Yang, S.C.; Meng, G.; Bi, J.L.; Li, J.H.; Yang, S. Facile synthesis of novel CuO/Cu2O nanosheets on copper foil for high sensitive nonenzymatic glucose biosensor. Sens. Actuators B Chem. 2017, 248, 630–638. [Google Scholar] [CrossRef]
  35. Kong, C.; Lu, W.; Zong, J.; Pu, F.; Hu, X.; Zhang, X.; Yang, Z.; Wang, F.; Jin, H. Template-assisted synthesis of CuO hollow nanotubes constructed by ultrathin nanosheets for lithium-ion battery applications. J. Alloys Compd. 2020, 849, 156635. [Google Scholar] [CrossRef]
  36. Wei, C.H.N.; Zou, X.; Liu, Q.M.; Li, S.X.; Kang, C.X.; Xiang, W. A highly sensitive non-enzymatic glucose sensor based on CuS nanosheets modified Cu2O/CuO nanowire arrays. Electrochim. Acta 2020, 334, 135630. [Google Scholar] [CrossRef]
  37. Alam, M.M.; Howlader, M.M.R. Nonenzymatic electrochemical sensors via Cu native oxides (CuNOx) for sweat glucose monitoring. Sens. Bio-Sens. Res. 2021, 34, 100453. [Google Scholar] [CrossRef]
  38. Khosroshahi, Z.; Karimzadeh, F.; Kharaziha, M.; Allafchian, A. A non-enzymatic sensor based on three-dimensional graphene foam decorated with Cu-xCu2O nanoparticles for electrochemical detection of glucose and its application in human serum. Mater. Sci. Eng. C 2020, 108, 110216. [Google Scholar] [CrossRef]
  39. Amirzadeh, Z.; Javadpour, S.; Shariat, M.H.; Knibbe, R. Non-enzymatic glucose sensor based on copper oxide and multi-wall carbon nanotubes using PEDOT:PSS matrix. Synth. Met. 2018, 245, 160–166. [Google Scholar] [CrossRef]
  40. Mahmoud, B.G.; Khairy, M.; Rashwan, F.A.; Foster, C.W.; Banks, C.E. Self-assembly of porous copper oxide hierarchical nanostructures for selective determinations of glucose and ascorbic acid. RSC Adv. 2016, 6, 14474–14482. [Google Scholar] [CrossRef]
  41. Zhang, F.; Huang, S.; Guo, Q.; Zhang, H.; Li, H.Y.; Wang, Y.H.; Fu, J.L.; Wu, X.J.; Xu, L.G.; Wang, M.Y. One-step hydrothermal synthesis of Cu2O/CuO hollow microspheres/reduced graphene oxide hybrid with enhanced sensitivity for non-enzymatic glucose sensing. Colloid Surf. A 2020, 602, 125076. [Google Scholar] [CrossRef]
Sensors 23 00695 g001 550
Figure 1. (a) Schematic illustration of the synthesis process of CuxO NFs/Cu NPs nanocomposites and (b) their application mechanism in noninvasive glucose detection.
Figure 1. (a) Schematic illustration of the synthesis process of CuxO NFs/Cu NPs nanocomposites and (b) their application mechanism in noninvasive glucose detection.
Sensors 23 00695 g001
Sensors 23 00695 g002 550
Figure 2. Images of (a) FESEM, (b) TEM, (c,d) HRTEM, (insert c1,d1) line profile and (insert c2,d2) FFT of CuxO NFs/Cu NPs nanocomposites. (e) XRD patterns (the signs of “*”, “+”,”−” represent the phase of “Cu”, “CuO”, “Cu2O”, respectively) and (f) XPS Cu 2p spectra of Cu NPs, CuO NFs/Cu NPs nanocomposites and CuxO NFs/Cu NPs nanocomposites.
Figure 2. Images of (a) FESEM, (b) TEM, (c,d) HRTEM, (insert c1,d1) line profile and (insert c2,d2) FFT of CuxO NFs/Cu NPs nanocomposites. (e) XRD patterns (the signs of “*”, “+”,”−” represent the phase of “Cu”, “CuO”, “Cu2O”, respectively) and (f) XPS Cu 2p spectra of Cu NPs, CuO NFs/Cu NPs nanocomposites and CuxO NFs/Cu NPs nanocomposites.
Sensors 23 00695 g002
Sensors 23 00695 g003 550
Figure 3. (a) Optical images of electrochemical measurement. (b) CV curves of different samples with 1.0 mM glucose concentration. (c) CV curves of CuxO NFs/Cu NPs nanocomposites-based sensor with increased glucose concentration. (d) the extracted calibration curves of a current response versus the glucose concentration at different potentials from +0.4 V to +0.6 V. (e) Amperometric responses with increased glucose concentration on +0.55 V. (f) The extracted currents upon different concentrations and corresponding calibration curves.
Figure 3. (a) Optical images of electrochemical measurement. (b) CV curves of different samples with 1.0 mM glucose concentration. (c) CV curves of CuxO NFs/Cu NPs nanocomposites-based sensor with increased glucose concentration. (d) the extracted calibration curves of a current response versus the glucose concentration at different potentials from +0.4 V to +0.6 V. (e) Amperometric responses with increased glucose concentration on +0.55 V. (f) The extracted currents upon different concentrations and corresponding calibration curves.
Sensors 23 00695 g003
Sensors 23 00695 g004 550
Figure 4. (a) The amperometric response with 1.0 mM glucose for 1000 s. (b) normalized amperometric response during the repeating test. (c) amperometric response of the sensor during consecutive addition of interference chemicals at +0.55 V. (d) normalized response of interferences.
Figure 4. (a) The amperometric response with 1.0 mM glucose for 1000 s. (b) normalized amperometric response during the repeating test. (c) amperometric response of the sensor during consecutive addition of interference chemicals at +0.55 V. (d) normalized response of interferences.
Sensors 23 00695 g004
Sensors 23 00695 g005 550
Figure 5. Optical images of (a) twisting 90°, (b) bending 90° and (e) human real sweat measuring method. Amperometric response of the composite films by 0.5 mM glucose concentration with (c) twisting and (d) bending 0, 100, and 500 cycle times. (f) Amperometric response of the sensor before meal (−30 min), after meal 30 min, 3 h and 5 h, the normalized amperometric response shown as insert graph.
Figure 5. Optical images of (a) twisting 90°, (b) bending 90° and (e) human real sweat measuring method. Amperometric response of the composite films by 0.5 mM glucose concentration with (c) twisting and (d) bending 0, 100, and 500 cycle times. (f) Amperometric response of the sensor before meal (−30 min), after meal 30 min, 3 h and 5 h, the normalized amperometric response shown as insert graph.
Sensors 23 00695 g005
Table
Table 1. Analytical performances of CuxO NFs/Cu NPs nanocomposites-based sensor compared with other non-enzymatic glucose sensorsα.
Table 1. Analytical performances of CuxO NFs/Cu NPs nanocomposites-based sensor compared with other non-enzymatic glucose sensorsα.
ElectrodeSensitivity (μA mM−1 cm−2)Liner Range (Up to mM)Detection Limit (nM)Reference
Cu/CuO/Carbon3203.37560[15]
Cu/Cu2O/Carbon Spheres63.80.695000[23]
CuO Nanoflakes431.32.580[17]
CuNOx thin film603.42794,210[37]
Cu-xCu2O/graphene film230.861016,000[38]
PSS-CuO-CNSs/ graphite 663.210230[39]
CuO-screen-printed electrodes383310,000[40]
CuxO hollow spheres/rGO635.315141150[41]
This work779>2.579.1This work
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Yu, Z.; Wu, H.; Xu, Z.; Yang, Z.; Lv, J.; Kong, C. Wearable Noninvasive Glucose Sensor Based on CuxO NFs/Cu NPs Nanocomposites. Sensors 2023, 23, 695. https://0-doi-org.brum.beds.ac.uk/10.3390/s23020695

AMA Style

Yu Z, Wu H, Xu Z, Yang Z, Lv J, Kong C. Wearable Noninvasive Glucose Sensor Based on CuxO NFs/Cu NPs Nanocomposites. Sensors. 2023; 23(2):695. https://0-doi-org.brum.beds.ac.uk/10.3390/s23020695

Chicago/Turabian Style

Yu, Zhipeng, Huan Wu, Zhongshuang Xu, Zhimao Yang, Jian Lv, and Chuncai Kong. 2023. "Wearable Noninvasive Glucose Sensor Based on CuxO NFs/Cu NPs Nanocomposites" Sensors 23, no. 2: 695. https://0-doi-org.brum.beds.ac.uk/10.3390/s23020695

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop